Dual os windows 8.1 with linux

can I install ubuntu 64-bit along with windows 8.1..?Because the last time i tried with 32-bit version ,the entire harddisk got erased..When i enquired with support center they told "HP doesnt support Dual OS"...is that so..?

Hi @sundar24295 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Similar Messages

Dual booting Windows 8 and Arch Linux with UEFI

Hi all!
I'm trying to install Arch Linux on my computer where I already have Windows 8, and I'm getting a little stuck when it comes to the partitioning.
Following the beginner's guide and the method here: https://wiki.archlinux.org/index.php/Un … n_in_Linux for setting up the partitions properly, regarding UEFI. My problem is that when using cgdisk to set up a new EFI system partition (ef00), I get an error message when trying to write the partition table (just saying that something went wrong). I figure the problem is that I already have a partition like this (correct me if I'm wrong), but it really looks like it succeded (see info below). So my question is: How do I preceed to keep my Windows 8 installation happy, but installing Arch? Do I remove the old EFI system partition and create a new one, or is there some method that allows me to edit the already existing one, to allow me to dual boot Windows 8 and Arch?
My partition table now looks like this:
Part. # Size Partition Type Partition Name
1007KB free space
1 500MB Windows RE Basic data partition
2 300MB EFI System EFI system partition (this one was already present on my system)
3 128MB Microsoft reserved Microsoft reserved partition
4 63.5GB Microsoft basic data Basic data partition
8 512MB EFI System EFI System partition (this is the one I tried to create when I got the error message)
5 29.5GB Linux filesystem Arch (this is where I was going to put my Arch installation)
6 22GB Windows RE Basic data partition
7 1024MB Windows RE Basic data partition
615KB free space
Just for the record; I only created partition #8 and #5.
Any help is appreciated! And sorry for beeing a total noob, but I really suck at this.

sudo make sandwich wrote:If it is possible to share ESP between OSes, how do I do this (would it be sufficent to follow this section: https://wiki.archlinux.org/index.php/Beginners'_Guide#For_UEFI_motherboards)?
There's really very little to do to share an ESP between OSes. Most OS installers will auto-detect the ESP and use it. Problem solved. For Arch it may be a bit more effort just because Arch uses a more hands-on installation process, but I've only done a couple of Arch installations, and the last one was several months ago, so I don't recall the details clearly enough to comment.
And how big will the partition need to be? The beginner's guide says 512MB or higher.
I don't know what was in the mind of the author, but my guess is that's because that's roughly the cutoff point where mkdosfs starts creating FAT32 by default rather than FAT16. The ESP is officially supposed to be FAT32, not FAT16, although FAT16 usually works OK. It's also possible to create FAT32 on smaller partitions by using an explicit option to mkdosfs ("-F 32").
The optimal size of the ESP depends on the files stored on it. If you don't store your Linux kernels, something as small as 100MiB is usually adequate; but a few Linux kernels and their initrd files can consume twice that amount. My own recommendation is for the ESP to be 200-500MiB.
The only error message I got from cgdisk is "Problem saving data! Your partition table may be damaged!", however booting Windows again works fine. Parted did not complain about antything.
Use the "verify" function in cgdisk. That will reveal any problems with the data structures. If a verify turns up OK, then that means that cgdisk ran into some sort of disk problem. Running gdisk rather than cgdisk and using the gdisk "w" option (without making any changes) may produce a more helpful error message.

[SOLVED] Dual boot windows 7 and arch Linux with seperate hard drives

Ok so I'm stuck trying to get my computer to dual boot windows 7 and arch. They are installed on different hard drives and I have grub 2 as the boot loader. I can't find any tutorials on how to do it with seperate hard drives I know how to do it if they are on the same hard drive. Also I want windows on the "first" hard drive how do I check to see which one it considers the first?
Last edited by bdawg (2012-09-21 23:15:37)

DSpider wrote:
drobole wrote:If you want to change it so that sda becomes sdb and sdb becomes sda, you should be able to do that in BIOS.
Not from the BIOS. He would need to physically open up the computer and switch the cables between them (or add another drive).
There's no actual performance increase in changing this order. Performance increase is when you have the partitions as close to the beginning of a HDD as possible, where the platters spin faster (basic mechanics, not to be confused with CD/DVD, which are being written from the inside-out to prevent errors after extended usage), and it especially doesn't apply to SSDs whatsoever.
You may be right about that. I remember I had to do this a while back but I probably switched the cables. It also messed up the drive mapping in Windows 98 if I remember correctly.

[Solved]dual boot windows 7 and arch linux

I have successfully installed arch linux dual boot with the original win7 on my PC. If I only use linux, then the system works well. The problem is that once I boot into Win7 then after reboot, the linux boot manager will stop working and the system always boots into windows automatically. My guess is Win7 automatically repair the boot loader.
My current solution is whenever I have finished using Windows, I'll boot with my linux USB installation, and run "gummiboot --path=/boot install". Afterwards, linux will work fine. But I believe there must be a better solution. Any help will be appreciated.
I have UEFI board by the way.
Last edited by jl2014 (2015-04-19 17:35:57)

Thanks for all your help first! I have tried Head_on_a_Stick's suggestions as the first step. Here is what I did. I have created :
$ cat /boot/loader/entries/windows.conf
title Windows
efi /EFI/hidden/Boot/bootmgfw.efi
The window boot path was :
/boot/EFI/Microsoft/Boot/bootmgfw.efi
and I changed
/boot/EFI/Microsoft
to
/boot/EFI/hidden
After reboot, I clicked 'Windows' option on the linux boot manager. Below are the error messages:
Windows failed to start.
File: \EFI\Microsoft/Boot/BCD
Info: An error occurred while attempting to read the boot configuration data.
Any idea what goes wrong?
I'll try other suggestions soon. Thanks all of you again.
Last edited by jl2014 (2015-04-19 00:03:33)

Dual boot Windows 8.1 with Yosemite

I'm attempting to dual boot Windows 8.1 on my parents iMac. I downloaded and successfully used Boot Camp 5 to partition the drive, giving the new section 50GB. I successfully installed Windows 8.1. Unfortunate now I cannot access the Yosemite partition. Boot Camp is not available in the Windows 8.1 I just installed, so the obvious option to use Boot Camp to reboot into OS X is not available. I tried downloading Boot Camp in Windows, but it won't install - error message indicates there is no location to install it to. I tried to restarting and holding the option key 12 separate times, it always boots into Windows without bringing up the any other option. I tried booting into safe mode and resting the PRAM several times, same outcome of booting into Windows; although Windows did not always boot it froze half the time. The idea was just be able to run some Windows games without purchasing another computer. Any ideas on what went wrong and how to fix it?

You do not need the Boot Camp drivers on Windows in order to start up in OS X. However, note that the option to start up with the Option (Alt) key is more tricky in those computers with a Bluetooth keyboard, such as the iMac.
In order to start up in OS X, you have to press the Option key since the startup sound has finished (if you do it before, your Mac will not recognize it) and hold it until you see all bootable partitions in the screen. Then, choose your OS X volume.
If you could not install the Boot Camp drivers in Windows, open Boot Camp Assistant after starting up in OS X and follow its steps (you will need a USB drive to save your drivers). Finally, start up in Windows, access to your USB drive through Windows Explorer and run the installer.

Dual boot after updated Bios with Linux... Solution

I'm sure that this may be common knowledge for many but I had a devil of a time after I flashed my bios and tried to install a Linux distro. My Windows 8 install went fine on a SSD but I couldn't get my Linux hard drive in my second hard drive caddy in my CD/DVD slot to boot. I'm a goof though. I was using the Linux guided install instead of doing the partition myself and defining / That worked. The Boot files of course go in the Root partition but the distros I used grouped them with the home folder.
I figured this out with my Fedora install. So my solution was to partition the target hard drive with a live DVD. Make a / partition and a home partition and swap. Then load up the distro and go. I hope I've helped someone and that Google pulls this up with a search.

Quote from: ghost.u94 on 13-June-15, 18:41:14
solved- it was the dimm 3 and 4 which got errors.
not using dual channel now. only using DIMM1,2 but at least it boots up.
Then your board is most likely defective. Reseat cpu and see if pins in the socket are bent. Else it might be the slots or their wiring.

[SOLVE] Dual Boot Windows and ArchLinux with Syslinux

Ok, i installed ArchLinux on my laptop with Windows XP (syslinux) and I cannot find get Windows to boot or mount it. I have tried to do what i can to do this but cannot. I Installed XP first like a should and something i think might be needed to know is after i created the partitions scheme (10Gb (boot partition), 50GB (XP), 80GB(was unallocated)). The installation disk formated both 2 partitions in NTFS but i installed XP on the second and Windows reported them as C and D drives. Windows being D. Thought that was bit werid thinking Windows installed the mbr on that partition. When I installed ArchLinux, it did have the boot flag set on 10GB (or C drive).
Since I installed ArchLinux, I have been unable to find a solution to mounting/booting to Windows. Installed NTFS-3G and that didn't work when i tried mount /dev/sda3 windows and i did created a folder named windows but got ...
mount: wrong fs type, bad option, bad superblock on /dev/sda3,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
Tried dmesg | tail and got
[ 76.524133] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 179.468499] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
[ 705.472330] 8139too 0000:02:03.0 enp2s3: link down
[ 717.380879] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 726.447184] 8139too 0000:02:03.0 enp2s3: link down
[ 727.596128] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 732.616138] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 733.848832] 8139too 0000:02:03.0 enp2s3: link down
[ 834.062062] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 2131.449211] perf samples too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
This is when i run sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 149.1G 0 disk
|-sda1 8:1 0 9.8G 0 part /boot
|-sda2 8:2 0 1K 0 part
|-sda3 8:3 0 53.6G 0 part
`-sda5 8:5 0 85.7G 0 part /
sr0 11:0 1 1024M 0 rom
My syslinux is
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda5 rw
INITRD ../initramfs-linux.img
LABEL windows
MENU LABEL Windows
COM32 chain.c32
APPEND hd0 3
NOTE: chain is in the same directory with syslinux
I really think Windows got corrupted but not sure. Thought about repairing the mbr on windows and booting to it then reinstall syslinux but really don't want too.
Thanks in advance
Last edited by jag-ster (2014-11-27 02:12:12)

Here is the partition table:
/dev/sda1 one HUGE linux /boot primary partition (assuming ext4)
/dev/sda2 "name" of the extended partition
/dev/sda3 primary Windows partition (assuming NTFS)
/dev/sda5 logical Linux root partition (assuming ext4)
/dev/sda1 to /dev/sda4 are either all primary, or three primary and one extended. After /dev/sda4 all partitions are logical. If you're still wondering why is there no /dev/sda4, it's because you have 2 primary and one extended, so /dev/sda4 is reserved for another primary partition.
Windows problem:
The /dev/sda1 which Windows named C: is Windows equivalent of linux /boot. When you told linux to place its /boot on /dev/sda1 it formated boot files of Windows. Now you have Windows OS with no kernel. In other words there is no way to boot Windows if you don't reinstall it. Actually there is a way, but you would than screw up Arch.
Mounting problem:
You can never mount extended partition, only logical (an extended partition is made of logical partitions). You want to do:
sudo mount /dev/sda3 -t NTFS-3g -o rw,uid=YourUserName /path/where/you/want/this/partition/mounted
EDIT:
Try it this way:
- Backup all your data
- Delete every partition
- Start Windows installation
- Make only one partition (c:/ for Windows)
- Let Windows make another partition
- Make one more so you could have a data partition, which does not need to be formated to reinstall Windows
- Start Arch installation
- Get to partitioning
=Partitioning=
- /dev/sda4 extended (take the rest of the drive)
- /dev/sda5 logical /boot 512MiB
- /dev/sda6 logical / 20GiB
- /dev/sda7 logical /home (the rest)
Making a separate /home partition will come in handy when reinstalling Arch (any linux distribution), or switching between distros, because it is the equivalent of D:/ in Windows. Also consider LVM.
Last edited by bstaletic (2014-02-28 23:25:33)

Firefox works at mcdonalds with windows but not with linux

I have Windows 7 Pro and Ubuntu 14.04 LTS on my laptop. I use firefox browser on both OS's. I am able to connect to internet when I use Windows OS and run firefox at McDonalds. But, when I try to use firefox and Ubuntu OS it will not connect while at McDonalds. Otherwise, the Ubuntu distro and firefox work fine everywhere else.

''bsluss [[#question-1051190|said]]''
<blockquote>
I have Windows 7 Pro and Ubuntu 14.04 LTS on my laptop. I use firefox browser on both OS's. I am able to connect to internet when I use Windows OS and run firefox at McDonalds. But, when I try to use firefox and Ubuntu OS it will not connect while at McDonalds. Otherwise, the Ubuntu distro and firefox work fine everywhere else.
</blockquote>
Thanks for the response. To narrow this down a bit more, the wireless makes the connection to their router, but, mozilla does not bring up the splash page that is needed to accept their connection. Again, it only happens when running firefox with Ubuntu; not when running firefox with Windows.

I'm thinking of quiting windows and go with linux

ubuntu is so much faster booting - and the c drive seems to struggle with vista

@beickus: I'm a Linux fan, but I have to say that Win 7 runs really nicely on my T400. Vista, not so much. Never thought I'd say something positive about a MS OS. I was forced to buy this thing with Vista on it. Grrr. Once I went to '7, I was much happier.
@warnec: Burn your Product Recovery Media before you do anything else. You may not want WinX on your machine, but the next owner might. You can make the recovery media now for the cost of a few pieces of plastic, or $$ later. Or you might want to take a walk on the dark side and give '7 a try...
@EVERYBODY: Burn your Product Recovery Media immediately on opening the box your new StinkPad came in. NOW! (and don't fidget when I'm yelling at you...)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can I compile my project from windows to work with linux

I have written a program in Labview 7.1 for windows XP. Some costumers are interested to run this software under Linux Ubuntu. Can I write programs in labview on a windows-pc and from there build a application to run under Linux ?

Hi [email protected],
No, each operating system uses a different type of executable. There is a different LabVIEW Run-Time engine for Linux, Windows, and Mac. Any installer you build will only run on the OS that you built it on. However, any VI that you create can be opened and run on a different operating system if you have the development system.
Finally, the only way to deploy a LabVIEW application on a particular operating system is to use the Application Builder for that operating system.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

Dual Boot Windows 7 and Arch with Shared NTFS partition.

Hi everyone,
I want to dual boot windows 7 and Arch Linux.
Here's the problem... my hard drive isn't the biggest. I want to store all my music, movies, pictures, and documents on partition that both linux and windows can access seamlessly.
I want the partition to be NTFS. -- (the programs that map an ext4 drive to Windows are trash).
Here's what I think I need.
30GB NTFS to Windows.
30GB ext4 to Arch Linux
The remainder (190ish GB) to Shared Data.
I don't want the swap partition because I have a SSD and 4GB of RAM.
What is the best way to setup my partitions? And is this even possible?
Thanks!

Not a problem. I would create:
First of four primary partitions for windows.
Second of four primary partitions for /boot
Third of four partitions is an extended partition encompassing all the space not used by the first two partitions.
Put everything else inside the extended partition.
Mine is a bit more complicated, but this should give you an idea:
ewaller@odin:~ 1005 %sudo fdisk -l /dev/sda
Password:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x87b33479
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 121778159 60888056 7 HPFS/NTFS/exFAT
/dev/sda2 597366784 625135615 13884416 83 Linux
/dev/sda3 121778160 597366783 237794312 5 Extended
/dev/sda5 * 121778223 123770219 995998+ 83 Linux
/dev/sda6 123770283 131770589 4000153+ 82 Linux swap / Solaris
/dev/sda7 193213818 597360959 202073571 83 Linux
/dev/sda8 131781258 193213754 30716248+ 83 Linux
/dev/sda9 131770591 131781194 5302 1 FAT12
Partition table entries are not in disk order
ewaller@odin:~ 1006 %
Partitions 1 and 2 are Primary partitions. Partition 3 is an extended partition. All the others live in partition 3

Problems dual booting Windows Vista with Oracle Enterprise Linux 4

I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
Initializing hardware....Storage network"
It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

hi,
r u getting this error while installing oel or after installation?
which version of oel u r installing?
u may get this error probably due to hard disk (usually sata) compatility with linux.
--Regards
Xaheer

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Hi,
Any update here?
We may seek help at Fedora forum as Milos suggested, if convenient we could share the related thread link here for reference.
In addition, please also check the information in the similar thread:
Dual Boot Windows 8 and Linux?
Best regards
Michael Shao
TechNet Community Support

DUAL BOOT windows 7 and linux HELP with Current info on BIOS, MBR vs GPT, etc

I have a feeling this should be easier than what I'm making it. Please educate me on Lenovo's BIOS Setup menus, etc.
I have installed easyBCD in Windows 7, and plan to use it to set up my new boot menu with Linux Mint (and possibly other distros).
I am using a live DVD. I inserted the DVD and went into SETUP and selected to boot off the DVD drive. It started to boot into Linux and all was going well.
However, I realized that I had not checked on the Secure features (Secure Boot, EFI). So I shutdown again and went into BIOS. I went to the SECURITY menu and Disabled UEFI. Then I disabled Secure boot.
Tried to boot off the DVD and couldn't get anywhere. Kept putting me back into the window to select the boot device over and over again. THought I'd ruined my machine
Anyway, finally stumbled upon STARTUP menu, and put it into EFI Legacy, and I was able to get back into Windows 7.
Obviously before I pursue this further, I need some educaiton on your MENUS, Lenovo and EFI/Secure Boot.
I have a feeling that I can probably now install the Linux but want to make sure my settings are correct before I pursue.
Thanks, Kim
Moderator note: this thread gets more Linux-flavored with each post Moved from the "T" board to the Linux board.

Hi, thanks for ans. Your specs are almost identical to my T530 ,which I should have listed. The only diff is
I have an i7 35something processor. Same intel card, RAM and HDD, not that that should matter I'm guessing.
I purposely avoided the Nvidia card because of all the heaadaches with Nvidia.
I have to teach a class tomorrow and I need to clean up my notes. (Definitely not computer related...LOL.) I don't want to be stressed out about this during class, so I plan to wait to attempt a new install tomorrow afternoon.
What I have done is find out some more info about dual booting with windows 7. I went in to windows 7 to shrink the C: partiition and it said I'd have to reserve at least 220 GB for MS! Not what I wanted; I don't really care a thing for MS. I was born and raised on Unix and Linux; I never really fiddled with MS after the demise of MS-DOS during my college days.
Given that, and the fact that I'd lose half my 500 GB HDD to the Borg, I may just chuck the entire dual boot thing and just load Linux on it.
If you say you're running Linux on it just fine, that would be a great encouragement. No HW problems at all? Everything working fine? Which distro are you using?
I plan to test Mint, Fedora, PCLinuxOS, Mageira (sp?), saybahon (sp again?), Debian Wheezy, and even Pear, LOL. I'll keep trying till I find a distro to run on my Lenovo T530, but I'm guessing all of 'em should do okay.
I have Lubuntu I could give a spin, as well and Crunchbang and Bodhi, but they're all 32 bit. (I have an antique Dell desktop that I still use down in my woman cave.)

Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows

I've got a Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows. I've tried all of the following initial tests as suggested on forums:
-Ram swaps
-Alternating video card in PCIe slots
-Trying alternate video card
-resetting pram and smc
-Multiple tests with memtest86+ over 26hrs and no failed ram
-Multiple tests (8-12 cycles) with apple HW diagnostics and no problems
-Firmware is approved firmware for early 2008 model...no new updates.
Gentoo livecd works fine and I even installed to hard drive and it boots fine with it. In addition to above tests I also ran a linux stress test putting all 8 cores at a load of 22 for 2.5hrs with no problems.
Memtest86+ for 24hrs+ yields no problems.
Where problems occur:
Booting off hard drive, DVD or firewire yields an immediate curtain of death and booting off a new snow leopard DVD dies about 25% into the install.
Looking at error log and a quick dmesg shows "Package 0 didn't get an HPET" and complains about AppleIntelCPUPowerManagement.kext. Google turns up illegal uses of this, so doesn't apply to my use case.
I'm a bit stumped since all was working well until one day it was non-stop curtains of death and can't get them to go away.
A logic board replacement at $1100 is not a feasible option for something that works on linux and windows, but not OS/X, is a bit disappointing and somewhat surprising.
Thanks for your help and advice.
Regards,
Marcos

Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
I suppose it is possible something tried and failed to modify the Mac's firmware.
If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

Dual os windows 8.1 with linux

Similar Messages

Maybe you are looking for