Dual screen question
bit of a story - I'm in the USA trying to give IT support to my dear old mum in the UK - forgive me if I'm missing something
She has just bought herself a new screen to go with her Macbook so she can see all her photos in their full glory, but if she pulls iphoto on to her new screen the adjust button (when she clicks Edit) isn't there - if she pulls it back on to the laptop it comes back?
I've done the delete plist bit but it still happens
Any ideas??
Sorted - It was a screen resolution issue - the new larger screen was set too low - hence the 'buttons disappearing!'
Similar Messages
-
Problem with dual screen (24" imac 2006 ver)
hi
i've got a 24" intel imac (2006 ver) and i've connected it using apple's mini-dvi => vga adapter to my 2nd 22" lcd monitor, a samsung 2232GW, which is set to 1680 x 1050.
however, the samsung lcd displays (when i'm using as dual screen) is quite blur and double imaged. quality is readable but very irritating. i'm also using the same monitor for my ps3 (uses the DVI side) and have no problem with any visual aspect. I've tried playing around with the settings like resolution and calibration and tuning but didn't help at all.
anyone might have any ideas and enlighten me on this issue?
thanks
Message was edited by: TreonDid you get any resolution to your question? I have the Samsung monitor almost like yours, and I posted two seconds ago. I think I have a similar problem. I had been using my Samsung with my PC, and just switched to Mac. I loved my Samsung, but now ,for the first time using as a second. Hooked up to mini dvi to dvi, and reported a glow, or tinge coming around any window that I may place on the Samsung.Also, when Ilook at the background around the window I can see that the resolution is not perfect and is breaking up a little. Did you try VGA? and did it help? Curious to know
-
Where is the dual screen mode in Dreamweaver Cloud?
There was a dual screen (NOT SPLIT SCREEN) mode available in Dreamweaver CS6. What happened to it in the cloud version?
Thanks,
ClydeNo, I was talking about the design and code on separate monitors but I received the correct information after my question was moved to another forum.
Thank you -
Is it possible to get automatically displayed a learning
video (made with Adobe Captivate) on the the extended screen every
time you start the video file in a dual screen environment?
Actually the video has to be dragged manually from the primary
screen to the extended (secondary) screen. Thanks in advance for a
good solution of this problem.This is not really a Captivate problem. But the answer is,
the application will start in the Windows environment in which it
was last successfully shut down, provided that environment still
exists.
I suppose it might be possible to write a batch file that
somehow specifies the check for a dual setup and the startup
ordered to take place at a secific point within that setup ... then
start the application from the batch file. But I really wouldn't
have a clue how to do that. You might have better success asking
that question of a Microsoft Windows guru ... (?)
~regards
Larry
P.S. Welcome to the user group for Captivate ... I am glad
you posted the question, and though I don't see a solution within
Captivate, perhaps someone else has a better solution (?). -
Dual Screens - can you do it on the Essential All in One?
I have a standard Essential all in one.
I thought it would be handy to run dual screens for something I am working on but cannot see a way to do this on the machine.
Is it possible?
Thanks
AMChi
Can you share what system are you using and what type of connection is has,
This is you computer model ex. Ideapad g500 y510P etc.. you can find it on your system stickers
Also share what TV/Display you're using.
This is the model name of your external Display, the external monitor you are using
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?
There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode. -
[SOLVED] Best DE for dual screen setups?
Sorry if this is a dumb question, but what is the best DE for a dual screen setup on Arch? Also, can I just use the standard xrandr method to be able to drag windows between screens, if not, what do I do?
Many thanks.
Last edited by treeman1111 (2013-02-19 22:44:59)Ok, so here is the output of xrandr -q:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
DFP4 disconnected (normal left inverted right x axis y axis)
DFP5 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 59.9 60.1 50.0 60.0
1776x1000 50.0 59.9 50.0 60.0
1680x1050 60.0 50.0 59.9
1400x1050 60.0 50.0 59.9
1600x900 50.0 59.9
1280x1024 50.0 75.0 60.0
1440x900 50.0 59.9
1280x960 50.0 75.0 60.0
1152x864 50.0 59.9 75.0
1280x768 50.0 75.0 60.0
1280x720 60.0 50.0 59.9
1024x768 50.0 75.0 60.0
1152x648 50.0 59.9
800x600 50.0 75.0 60.3
720x480 50.0 60.1 60.0 60.1 59.9
640x480 50.0 75.0 60.0 59.9
DFP6 disconnected (normal left inverted right x axis y axis)
DFP7 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis) -
TooltipText used with dual screen problem
Hi,
In my application I use a dual screen, so JComponent may be either on one screen or the other.
My problem is when the mouse rolls over a JComponent on the right screen, the Tooltiptext associated is displayed onto the left screen.
Any idea if I could display it automatically on the good screen or if I have to implement myself the display ?
Thx for advanceDid you get any resolution to your question? I have the Samsung monitor almost like yours, and I posted two seconds ago. I think I have a similar problem. I had been using my Samsung with my PC, and just switched to Mac. I loved my Samsung, but now ,for the first time using as a second. Hooked up to mini dvi to dvi, and reported a glow, or tinge coming around any window that I may place on the Samsung.Also, when Ilook at the background around the window I can see that the resolution is not perfect and is breaking up a little. Did you try VGA? and did it help? Curious to know
-
Dual screen on intel with compiz
Hi all
I've been trying to get compiz to work with dual screen on my fully updated Arch Linux laptop for a while now. It has an Intel card and I usually set up dual screen by using xrandr. This works perfectly under metacity but crashes X under compiz. If I try to set dual screen as the default in the gnome menu and then restart X, I get it under compiz but unusably slow. I have searched google but haven't been able to find a solution. I have reproduced this problem on two different intel based laptops. Has anyone been able to get a working dual monitor setup with compiz on Intel?
Intel driver:
> cat /var/log/Xorg.0.log | grep intel_drv.so -C 2
[ 32.614] (II) Loading extension DRI2
[ 32.614] (II) LoadModule: "intel"
[ 32.615] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 32.633] (II) Module intel: vendor="X.Org Foundation"
[ 32.633] compiled for 1.9.4, module version = 2.14.0
Compiz version:
compiz 0.8.6
X version:
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-ARCH i686
Current Operating System: Linux stoofvlees 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686
Kernel command line: root=/dev/disk/by-uuid/0fa5f37a-abdc-422f-929b-9fa8a4f2df8d ro acpi_enforce_resources=lax
Build Date: 04 February 2011 09:39:45PM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Thanks in advance. Posted this on the compiz forums too but I'm a bit scared by the motherload of unanswered questions on there.Hi all
I've been trying to get compiz to work with dual screen on my fully updated Arch Linux laptop for a while now. It has an Intel card and I usually set up dual screen by using xrandr. This works perfectly under metacity but crashes X under compiz. If I try to set dual screen as the default in the gnome menu and then restart X, I get it under compiz but unusably slow. I have searched google but haven't been able to find a solution. I have reproduced this problem on two different intel based laptops. Has anyone been able to get a working dual monitor setup with compiz on Intel?
Intel driver:
> cat /var/log/Xorg.0.log | grep intel_drv.so -C 2
[ 32.614] (II) Loading extension DRI2
[ 32.614] (II) LoadModule: "intel"
[ 32.615] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 32.633] (II) Module intel: vendor="X.Org Foundation"
[ 32.633] compiled for 1.9.4, module version = 2.14.0
Compiz version:
compiz 0.8.6
X version:
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-ARCH i686
Current Operating System: Linux stoofvlees 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686
Kernel command line: root=/dev/disk/by-uuid/0fa5f37a-abdc-422f-929b-9fa8a4f2df8d ro acpi_enforce_resources=lax
Build Date: 04 February 2011 09:39:45PM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Thanks in advance. Posted this on the compiz forums too but I'm a bit scared by the motherload of unanswered questions on there. -
Dual-screen support in FF 12 broken (Mac OS X Snow Leopard)
I have a dual screen setup (2 displays), in FF < 12 my Firefox opened by default on my right display. I have my left display set up as primary display.
With the update to FF 12, Firefox always opens on my primary display albeit all the way to the right of the screen.
I have to drag my window now to my other screen after every time I close (Command-Q) Firefox.
PS. The same happens with Thunderbird 12there is a bug, see: https://support.mozilla.org/en-US/questions/926289
thank you -
... just need to know if this is an ongoing thing to live with, or is there any chance it will be 'fixed' to work as it does in 2.7.
Here's the problem.
Previously, with a dual screen setup, one could select 6 (some number) of the images on (say) the lefthand screen, and have them come up larger in Survey mode on the right hand screen. From there, I could accept, reject, flag, change rating on the right hand screen. To affect ALL the selected images, I could make the change in the LEFT hand (main) screen. To affect only ONE of them, I could click on the star rating or accept/reject flag on the RIGHT hand screen.
Now, it seems there is no differentiation between the screens.
IN addition to there being no rating on the right hand screen, if say 6 images are selected, and one wishes to change the reject flag to accept, doing that on EITHER screen results in ALL of them changing. Instead of being able to accept only ONE image, I have to LOOK at them ONE AT A TIME, in any mode.
Unacceptable!!!
THis slows work down to a CRAWL. My only question at this time is this: Is this on ANYONE's list to be fixed? or do I tell my students to stay away from Lightroom altogether?
I have spent two years developing this system, directly from the choices offered in LR2 and following.
DOing without it now is not an option.
Do I start over with a completely different program and stay away from LR altogether? or is there a good chance this will be remedied SOON?
thanksthanks for the suggestion, but this process is SO central to the way I work I have tried nearly every combination of arrangements possible.
This one did not work either.
And indeed, why would it?
As much as it being the second screen, it's also the SURVEY mode that fails to take into accnt the settings needed.
I appreciate ANY suggestions, however. What i'd REALLY like is just to go back to LR2.7!!@ lol. -
KVM Between Mac Mini and Dual Screen PC????
Hello All,
I was wondering if one of you has the answer this.....
For work I am now working remotely from home. I have a ThinkPad W520 with Dock and two 19" ViewSonic monitors both with DVI cables. Since space in my place is an issue, I want to share my sons desk wich has a Mac Mini with an HDMI to DVI cable to a 19" Monitor.
My question is......is there a KVM switch out there that will allow for my setup plus keyboard and mouse to be used with the Mini? Then he can run dual screens on the Mini when I am not working.
Thanks for the help with this one!
AlexI am not aware of any KVM which can share two screens. The best you are likely to be able to do is put one of the screens with the keyboard and mouse on a KVM and share those.
You could also have a look at http://synergy-foss.org/ -
I work on dual screens on a new mac pro but when I do the 4 finger swipe it moves both screens, is there a way to move just the screen that is active?
Multiple desktops and dual screens really aren't meant to work together. Apple came up with this multiple desltops feature and never really thought about users that use a dual monitor setup. So use either multiple desktops OR dual monitors but not both. Also don't try to use any App in Full Screen Mode as that doesn't work with dual screen setups either.
-
Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?
try xxx - may work
_may_ work. -
What options do I have if I want to set up a dual screen?
I have a Thinkpad T400 with a ATI Radeon HD3470 card. I am running the latest Arch x86_64 with Fluxbox and the 9.4 Catalyst drivers.
What is the easiest solution to set up a dual screen? Is there a way to do this without editing xorg.conf? Not that editing xorg.conf really is a big problem, but I will be moving around a bit and finding the correct settings for each screen would take some work. And I would like to see how far the dual screen development has come on GNU/Linux.
The way I see it the best way would be to have two screens with separate resolutions. Since LCD screens do not handle resolutions other then the native very well. So just stretching the screen makes the slave screen run the same height as the parent screen. Or am I wrong? It is not a problem running stretched if the screens run at the native resolution.
So, xrandr just gives me stretching. And the need of editing xorg.conf.
What about Twinview(just for nVidia) and Xinerama?
Is there other solutions?
SOLUTIONS:
There is arandr and lxrandr, both frontends to xrandr. Requires minimal xorg.conf editing. Only add a virtual line in the screen section. The virtual size does not have to be accurate, it only have to be bigger then the screens together. In my case, I have a 1440x900 primary screen and at most a 1280x1024 secondary screen. So my virtual size would be minimum 2720x1024. This is with the screens side by side. If the screens is one above the other it would be 1440x1924.
The exact size of the monitor is handled by xrandr(arandr or lxrandr). So, there will be no dead zone in the width(side by side solution), if the real height is different on the screen there will be a dead zone in height.
Using arandr or lxrandr means that you manually have to set this up each time the computer is restarted. To automate this, you can use xrandr. First do a
# xrandr
Screen 0: minimum 320 x 200, current 2464 x 900, maximum 2720 x 1024
LCD connected 1440x900+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
1440x900 50.0*+ 60.2
1152x864 60.0 50.0
1280x768 59.9 50.0
1280x720 60.0 50.0
1024x768 60.0 50.0
800x600 60.3 50.0
720x480 60.0 50.0
640x480 60.0 50.0
640x400 59.9 50.0
512x384 60.0 50.0
400x300 60.7 50.0
320x240 60.0 49.9
320x200 60.1 50.0
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 connected 1024x768+1440+0 (normal left inverted right x axis y axis) 304mm x 228mm
1024x768 60.0*+ 75.0 70.1 60.0*
800x600 72.2 75.0 70.0 60.3 56.2
720x480 60.0
640x480 75.0 72.8 75.0 60.0
640x400 75.1 59.9
512x384 60.0 74.9
400x300 75.0 60.7
320x240 75.6 60.0
320x200 75.5 60.1
to find out where the screens are connected. Mine are LCD and CRT1. Then test with
# xrandr --output CRT1 --right-of LCD
to see if you get a stretched desktop. If this works, just add the last line to your .xinitrc
This solution gives you stretching.
My complete xorg.conf
# Copyright 2004 The X.Org Foundation
Section "ServerLayout"
Identifier "Laptop"
Screen 0 "Default" 0 0
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "True"
EndSection
Section "Monitor"
Identifier "LCD"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon_hd"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default"
Device "radeon_hd"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1024x768"
Virtual 2720 1024
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by orjanp (2009-05-01 09:33:55)I have an ATI Mobility x1600 on my laptop,and I use a separate CRT monitor as second output (well primary until I fix my backlight)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
Option "DontZap" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc"
Load "drm"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "No"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "No"
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "M56P [Radeon Mobility X1600]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "DRI" "on"
Screen 0
Option "DDCMode" "True"
Option "MonitorLayout" "LVDS,CRT"
EndSection
Section "Device"
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "M56P [Radeon Mobility X1600]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "DRI" "on"
Screen 1
Option "DDCMode" "True"
Option "MonitorLayout" "LVDS,CRT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "false"
EndSection
This works, and I get separate resolutions on the monitors. I tried using radeonhd but then the resolution on teh second monitor goes to some crappy values(which I figure are calculated proportionally to the 1280x800 one).
Maybe you are looking for
-
How do I update my IPad air with contacts from a PC?
I have a new Air, and the contacts list from my old Ipad are no longer correct. How do I get an updated contact list from my Outlook 2007 to the new Air. Old guy here, so please dial back the tech jargon. Thank you all
-
Restrict Deletion of Components from Service Order
Hello All, I noticed that I am able to delete the components from the Components tab of a Service Order even after I have completely issued the components. Is there a possible way to prevent deletion of components that have already been issued..? I t
-
How to select all (dots) in a scatter plot matrix?
I have a scatter plot matrix, and I'm manually changing the color of each trend line, which probably isn't the best way but it's an easy but time consuming way to do it. I can't feasibly change the color/stroke of every single scatter plot dot in eve
-
Outlook 2003 exchange 2010 shared agenda rights problem
good afternoon, I have a problem: A user has received permissions on a shared calendar but this does not include the 'remove' option. This works correctly most of the time. However, this behavior seems to change when it comes to recurring appointment
-
Best way to save mutliple frame grayscale images
I am capturing data at 30 fps using an NI frame grabber. The images are all grayscale (monochrome camera). I've been testing saving them as AVIs, but it keeps converting them to RGB color images which I then have to cast back to 8 bit. Also, these fi