Dual Screen / Render differ for the same image (same time!) - Full size

On my Mac Pro / lightroom 2.3, I have 2 screens connected (same brand: Dell, Same size 24'). One is in landscape position, the other is vertical.
I use the landscape one as Screen 1.
If I display an image (1:1 ratio) on the Screen 2, the rendering is not sharp (seem to not be finished / close to be!), the same image render on screen one is correct! The problem is easy to check: At the same time you have a sharp image (Screen 1) and a blurred one (screen2).
Images came from Canon EOS 50D raw file.
Does this problem know? Any idea to solve it?

I'm having a similar problem on my Mac Pro with an Apple 23" as Monitor 1 and a Samsung 21" in Portrait orientation as Monitor 2. Sometimes, even though full 1:1 previews have been rendered, when I zoom to the 1:1 view on Monitor 2 (usually with the Grid View on Monitor 1), it zooms in but never loads the 1:1 preview, so the image is blurry.
The only solution I've found is to restart Lightroom.

Similar Messages

Dual screening and clustering at the same time

i got a new imac 2010 and i want to know if i can cluster it with my old apple g4 imac and still be apple to use the screen.

A device can be connected to only one network at a time.
I will tell you what works for me.
Connect your TC to your modem. All you need to do is set up a dedicated n network on 5ghz freq (i used wpa2 wireless security) with with your TC and use that with all of your other n capable stuff like ATV, macbook air etc. Then connect your old AEBS using an ethernet cable to the ethernet AEBS connection to the TC ethernet. Then using Airport Utility find your AEBS, and set up a b/g network 2.4ghz freq (i used wep 128bit). While setting up the AEBS, click on the internet tab on the top and then go the bottom, where you will see connection sharing and select off (bridge mode). This will allow your AEBS to use the TC as a bridge to your cable modem. Now you have two wireless networks using one modem using essentially 2 base stations, TC and AEBS. My old AXs, old b/g imacs and iphone join the b/g network, and I can stream music from my n capable computer and old b/g imacs to my ATV and AX hooked to different stereos around my home. And log in to different music libraries and control the music from my iphone. My computer are all networked wirelessly. The higher encryption you use on the b/g network the slower it will be. Do not combine b/g/n network as it will be slow, and more so using any wireless security. Keep in mind you can also use an old AX instead of and old AEBS for the b/g network as well in bridge mode. Give different names for each network. Any neighbor on the same frequency using the same channel will interfere and slow your network done. There are cool widgets you can download that tell you what channels your neighbors are using and can select a different channel from them. It's complicated and takes patience, good luck.

How does iCal, or Calendar, order the display of multiple events for the same time?

I can't for the life of me figure out how iCal orders the display of multiple items at the same time. Does anyone have a clue? It's not alphabetical. It's not according the the order of the calendars in the left pane. Is it just random? Any help would be greatly appreciated.

In the focus lost eventhandling start a thread which does
the actual handling.
the new thread waits for a little time (0.1 seconds)
the click event of the button checks for a thread like the one above and tells it not to execute
This way you execute the for the lost focus event only if
the ok button isn't clicked in the same process ... not
realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

Black and unresponsive iPhone screen (vibrates twice at the same time)

Hi, I dropped my iphone on the ground and after I had picked it up the screen turned black and it started to vibrate when I plugged it in the charger. The phone was hot and would not cool down.
I have tried to hold the home button and the on/off button at the same time but it does not work. Please if anyone can help me and tell me what to do, I would appreciate it.

You physically damaged the phone when it was dropped. The only solution is relpacement or repair. Take it to Appel or an Apple authorized service provider.

Cannot get dual sound sources playing at the same time

Hello
New to Arch. I am trying to play a web based flash source and a web based java source at the same time. I can get both to play seperately but when I have both running only the first one opened has sound. I also installed pulseaudio-gnome, alsa-plugins, Firefox codecs and plugins. Below is my sound devices. Thanks for your reply.
lspci|grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

Try playing each of your apps. Do they show up in 'Playback'? What sink is selected, for each of them?
Why do you have 'Simultaneous output' anyway. Do you have multiple devices at some point in time that you need to output to at the same time? What modifications have you made to your pulse configs, or to your .asoundrc?
In other words, have you read and applied the Pulseaudio wiki.

Iphoto 09, the slider for the thumbnail doesn't show full size image

The slider in the lower left that when to the left shows small thumbnails and when to the right, to the "head icon", shows the image enlarged to fill the window, is broken in iPhoto 09. When you slide all the way to the right or click the head icon, the biggest the images magnify to is thumbnails sized to four across and three high thumbnails (displaying 12 big thumbnails rather than one screen filling image). The only way to examine the image now in 09 is to go into edit mode, which still has the row of thumbnails across the top instead of a single large image.
This is really annoying and stupid and makes the program much less useful. Why would they change the program to make it impossible to see the images at full screen unless in edit mode? Any way to put it back to the 08 behavior?

It does seem a bit silly to retain the icon that implies a full sized viewing though.
iPhoto menu -> Provide iPhoto Feedback
If a change is an improvement, I'm all for it. If it is an arbitrary and unnecessary change, it can just be irritating. Like changing the reload button in Safari from the upper left to a variable position somewhere in the upper middle part of the window, a change that improved nothing and probably was a bad idea; changing a constantly located icon to one that roams around depending on the window width.
Absolutely. Not sure what that has to do with iPhoto, though.
I can cope with changes that make things more efficient or improve quality.
Good to know.
I don't quite understand the defense of mindless changes that merely require the user to dig around and waste time figuring out what happened to seemingly missing standard features.
But who’s defending anything?
I don't think that the sheep who copes by blithely accepting being herded onto the slaughterhouse truck is necessarily exercising any signs of higher intelligence.
True. But what do you make of the one who goes ranting off about things based on incorrect information?
This change in the software is inconvenient and makes the program worse.
By way of explanation and not at all to defend: It’s a subtle thing, I know. But it does add a level of coherence to the OS. Quicklook in the Finder, for instance, does a similar thing with the same keystroke. Itunes starts playing a track on the same keystroke. So, I’m not sure where the failed analysis is.
Regards
TD

Does anyone know how I can record the screen and myself at the same time?

I have seen videos of people using their isigght camera to record their screen and a video of them is in the shape of a square on top of a corner of the screen.
Does anyone know how I can do that?

macnewcomer22 wrote:
I have seen videos of people using their isigght camera to record their screen and a video of them is in the shape of a square on top of a corner of the screen.
Does anyone know how I can do that?
I'm not certain I know what you want to do, but consider these ideas:
(1) If you have seen a video of people doing it, the people who made the video surely know how. Ask them if you can.
(2) You may be able to do what you want with this app:
http://b-l-a-c-k-o-p.com/CamCamX.html
(3) The easiest way I was able to record my screen and simultaneous video of me in a window in the top corner of my display was to use two webcams. I used QuickTimeX to make a screen recording while I used my built-in iSight to show me moving in my Photo Booth window on the display.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

TS3899 I can't open my e-mail icon once i click on the button my mail give me clear screen an close in the same time

I cannot open my e-mail icon once i click on the button my mail give me clear screen

Kill mail app from multitasking and retry.
If that's not work, Hold Power and Home button until Apple logo appears.

Schedule parallel activities on different resources for the same period

Hi,
I am trying to create a PPM where I need to define parallel activities on different resources for the same time period.
For example:
Input prod: P1
Output prod: O1
Now I define a dummy activity A1 to define this consumption i.e. 1 PC of P1 gives 1 PC of O1.
Now I have got 3 resources R1, R2, R3.
I define 3 activities A2, A3, A4 for these resources.
Now I have to arrange activities A2, A3, A4 such that they start simultaneouly after activity A1 and also end simultaneouly.
The Fixed duration for all the resources is 1 week.
My requirement is that out of these resources system should plan for demand considering the resource with minimum capacity
i.e. kind of bottleneck resource.
I am using CTM engine for planning.
I have defined A1 as predecessor for all the 3 activities A2, A3, A4 and after completion all the activities have a dummy successor activity S.
But this setting is not working and PPM is not getting exploded, If I use a normal linear relationship between activities it works fine but my requirement is not getting satisfied.
Can anyone please help me in this case or suggest some alternate method.
Thanks & Regards,
Sanjog Mishrikotkar

Hi,
You cannot use the old solman key as systems are on different server.
I think you have to delete the old Dev system and then generate new solman key.
Thanks
Sunny

How can i use an barcode scanner and a keyboard at the same time on Ipad

HI I am looking to find a way to use a barcode scanner and the on screen key bard at the same time, so far i cant seem to find a way to do it.
Does any one know how this can be done.
thanks

It is possible, I use multiple versions, however Firefox official policy is that you use firefox3.6 or 5 ; not firefox 4 which is not secure and not supported.
The easiest solution may be to use firefox portable http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 although firefox 3.6 will itself not be supported for much longer.

How do I connect two video cameras to my computer have them both show up on the desktop at the same time so I can see and capture both images using a screen capture program?

Hello,
I am a teacher and want to make some videos to post online for my class. I would like to have it set up so that I have a powerpoint presentation going, a video camera pointing at a piece of paper I can write on and another video camera pointing at me. How do I do this? I have seen several solutions but they seem to be for switching between videos whereas I want both video images to be on at the same time.
Also, is there a screen capture program you would recommend?

Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt

How do I get the "all floating" option in the "layout" to work? Something happened that it stopped working. I like to have several images on the screen at the same time.

I like to work with several images at the same time on the photoshop elements 12 "expert" screen and used to be able to have the "all floating" option in the "layout", thereby altering each image differently on the screen. I'm an artist and view multiple images while painting. But now that option doesn't work for some reason. Help!

Editor preferences>general, turn Allow Floating documents, but then you may need to go to window>images>float all in windows to make it work for currently open files.

My ipod touch is stuck in connect to itunes screen. I've tried to press Power and Home button at the same time for 10 seconds and all it does is go to a black screen. Press power button again and the usb cable with an arrow towards an iTunes logo.

I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Providing F4 help for the same field on selection screen

Hello Experts,
My requirement is :
There are 2 radio buttons and a parameter "p_file" on my selection scree.
1. rb_appl
2. rb_pres
If the radio button rb_appl = 'X', I need to place the logic of F4 help of application server for the field p_file. Else if the rb_pres = 'X', then I need to place the logic of F4 help of presentation server for the same field p_file.
I have written the code in the below manner
PARAMETERS: rb_appl RADIOBUTTON GROUP rad DEFAULT 'X',
                         rb_pres RADIOBUTTON GROUP rad ,
                         p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
      PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
But I am getting the F4 help for only the radio button for which i have placed the default value in the parameters.
So please let me know how to define the F4 help for the same field based on the radio buttons.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

Can I have diff transacton Variant for the same tcode?

Hi Experts,
Can I have diff transacton Variant for the same tcode? If so i will i assign it to diffrent users.?
Requirement Details:
I have three diiffrent roles accessing XK02.
I need to provide diffrent transactions variants for these 3 roles, through Variant groups. How will i do this?
When i tried to do this, i found that, we need to activate a standard variant for the transaction, which inturn will be default for all these roles. S how will i specify different Transaction variant for diff roles...
Please help..
In the below link i have seen a solution where i need to login into each users profile and set it.
link: [Variant Groups;
Thanks,
Jithin

>
jithin james wrote:
> Say i have two groups for the same transaction with two diff variants,
> then for group 1 i will assign variant1 and will activate this as the standard variant.
> NOw for group two, i will assign my second variant (without activating it as standard variant).
The way you explain is strange, I don't understand. You can't assign manually a variant group to a transaction variant, this is done automatically based on the names, maybe you make confusion with assignment between variant group and user?
A little example:
Say we have : ZG1 for group 1, and ZG2 for group 2. Transaction is ZT.
Say user is assigned to group ZG1 by default, and also ZG2 (he may switch to ZG2 using the transaction I mentioned above)
When user runs ZT transaction, SAP uses automatically ZG1ZT transaction variant (the standard variant is ignored when a transaction variant is found based on variant group). If the user switches to ZG2 variant group, SAP uses automatically ZG2ZT transaction variant.
If you activate a standard variant, this will taken into account for users which don't have a variant group assigned, or those which transaction variant doesn't exist for variant group + transaction code.
If it doesn't work as I said, maybe there is a bug, check SAP notes...

Dual Screen / Render differ for the same image (same time!) - Full size

Similar Messages

Maybe you are looking for