Dual speakers but only one at the bottom

Hi I have just purchased a tablet A7-50 A3500-F in the photos of this tablet it clearly shows that the speaker above the Lenovo sign is a mesh (holes in it) but on my device it has just got a blank plastic plate instead of mesh. is this faulty? I have taken a photo to show you what I mean. thanks
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.

i noticed that in the quick start guide it points to this at the top as being a receiver but dont have any idea what it receives. i sent lenovo an email but all i got back is it might be a new bit to make it look sleeker. i was under the impression that it had dual speekers so im still none the wiser.

Similar Messages

My video's have moved a few times so I have many of the movies showing up 4 times. But only one of the 4 is the real path. How to I get rid of the invalid paths in mass? I know I can get rid of them one-by-one but I want to do a bulk clean up.

I have many movies. I have moved them a few times. Now each movie shows up about 4 times in the video list but only 1 of the 4 is a valid path. How can I get rid of the invalid one in-mass. I know I can do them individually but it would take too long. So I want to do a bulk clean up so all the links are valid but I can't find a way to do it.

Install iTunes Folder Watch and set its option to check for dead tracks on startup. This will root out any tracks that are no longer in your folders, and can add any that are in your folders, but not in iTunes.
tt2

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

To mail acounts but only one on the screen?

I have to mail accounts and but how do i acces booth of them, there is only one email "butteon" on the ipad?

If you have more than one email account set up in the Mail app, then you should be able to navigate back up the account hierarchy by tapping on your account id at the top left of the Inbox listing and then tapping Mailboxes at the top left of your account's folder list - you can then navigate down into your other account.

Multiple albums' the same' on i-pod but only one in the library.

after i add some albums into my library they appear numerous times on my i-pod.some albums, when opened on i-pod contain the contents of other albums long with the correct tracks.
Everything in the library is normal its just on the i-pod it happens.I've tried deleting and reinstalling but it happens everytime.
Ive also tried resetting the i-pod.the only possible link i can see is the albums seem to have similar titles,like 'greatest hits'....

thewoostercode wrote:
My iPod doesn't treat all tracks with the same album title as one album... I have a couple of CDs with various artists on them, and I get multiple repetitions of the same album name on my iPod. With one of them, I actually get a separate "album" for every artist that's on the mix. With another, there are three "albums" that appear to be randomly sorted.
But if you select any one of those repititions I'll bet you get all the tracks from the album listed... An album called "The Album" will be listed once for each artist credited on it, unless marked as a compilation. On the other hand if two different bands record something called "Another Album" you'd expect to find first band's tracks on the first listing, and the second band's on the second. Instead both albums will have all the tracks by both bands, and will probably both be displayed with the first band's cover. It is in this respect that the ipod is treating all tracks with the same album title as one album. For the purposes of cover flow, however, it is also capable of treating a single album as a multiple entity.
tt2

I am trying to transfer my movies (mp4 files) to my IPad, but they are not showing up on the IPad. I have 13 movies showing on my IPad that they are in ICloud. I've sync'd the movies I want to the IPad, but only one is showing under the "movies" folder. ?

I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.

There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.

Home sharing is turned on on both of my computers but only one computer is showing the icon.

I have both of my computers turned on and home sharing is turned on on both computers as well but only one computer is showing the icon so I can't share. I have tried turning off the home share and turning it back on but nothing changed.
Any suggestions?

Hi there nc999!
I have an article here for you that will help you troubleshoot this issue with Home Sharing:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using the Apple Support Communities!
Cheers,
Braden

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7

Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

I have an ipod touch 4th gen ... love it .. but only one problem... the headphone jack is giving trouble.... help me plz!!

i have an ipod touch 4th gen ... love it .. but only one problem... the headphone jack is giving trouble.... help me plz!!

Have you verified that it is the headphone jack that is the problem by trying opther sets of headphones?
Have you tried cleaning the jack by using a QTip or similar ite?
If you confirmed that the headphone jack is the problem Apple will ony exchange the iPod for $99, $149 or $1999 depending upon the capacity.
A third-party place like the following is less expensive. Google for other places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

(please urgent) two web modules , but only one run at the same time

Hi sirs;
In jDev 11g, I've a project with two viewControler fusion Adf and one model ( service bc4j ) ;
When i Deploy the application using the topmost drop down list from jDev Ide ( application drop down list), only one of the two application works simultaneously.
Look , the two applications works, but they do not work at the same time.
stack trace like :
zip:C:/Users/t/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/DefaultDomain/servers/DefaultServer/tmp/_WL_user/PlanejamentoRH_V2.0/ebw81b/war/WEB-INF/lib/_wl_cls_gen.jar!/view/DataBindings.cpx
25/09/2009 15:56:25 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
INFO: ADFc: Inicializando Ciclo de Vida da Página do ADF para o ambiente JSF, LifecycleContextBuilder é 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
25/09/2009 15:56:25 UNEXPECTED_CLIENT_OBJECT_TYPE oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
SEVERE: oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
25/09/2009 15:56:25 UNEXPECTED_CLIENT_OBJECT_TYPE oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
SEVERE: oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
25/09/2009 15:56:25 UNEXPECTED_CLIENT_OBJECT_TYPE oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
SEVERE: oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
<25/09/2009 08h56min13s AMT> <Error> <HTTP> <BEA-101020> <[ServletContext@7863650[app:PlanejamentoRH module:ORHQVagas path:/ORHQVagas spec-version:2.5 version:V2.0]] Servlet failed with Exception
javax.el.PropertyNotFoundException: Target Unreachable, identifier 'controlerBean' resolved to null
 at com.sun.el.parser.AstValue.getTarget(AstValue.java:67)
 at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:126)
 at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:230)
 at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:400)
 at oracle.adfinternal.view.faces.renderkit.rich.FormElementRenderer.renderAsElement(FormElementRenderer.java:211)
 Truncated. see log file for complete stacktrace
>
Is thrown , just when we try to browse the second application( the first one is ok , up and working );
No metters , whose of the two applications is browse first , every the first work and the second fail;
I've made other very simple application with two projects and the two worked well, at the same time, but the real project is giving me this problem;
If someone could point me to some white-paper or give me some tips , I'll appreciate very much;
Fowards Thanks;
Marcos Ortega
Brazil

I reproduce it here;
I Just relocate the DataBindgs.cpx to view/foo/DataBinds.cpx and rename the view_view1PageDef to view_foo_view_view1PageDef and it's Works;
Please muhammed, it is related with mds / ADF Security Configuration ?
I was sure , that it will not work , in my thoughs "UNEXPECTED_CLIENT_OBJECT_TYPE" was throne because the second application should not be able to create a second instance of appModule because GUID problems ;
As a metter of fact, it was raised again , but the page and all data was displayed;
Lets see the log;
Target URL -- http://127.0.0.1:7101/Application2-ViewController1-context-root/faces/view1.jspx
09/10/2009 08:58:21 oracle.jbo.uicli.mom.CpxUtils$Visitor logMainApplicationCpx
INFO: file:/C:/Users/t/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/o.j2ee/drs/Application2/Application2-ViewController1-webapp/WEB-INF/classes/view/foo/DataBindings.cpx
09/10/2009 08:58:22 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
INFO: ADFc: Inicializando Ciclo de Vida da Página do ADF para o ambiente JSF, LifecycleContextBuilder é 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
09/10/2009 08:58:25 oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
*09/10/2009 08:58:28 oracle.jbo.uicli.mom.JUApplicationDefImpl logCpxUsageIdCollision*
SEVERE: Both view.foo.DataBindings.cpx and view.DataBindings.cpx use the same usageId: view_view1PageDef
FIX: Use view_foo_view_view1PageDef as the usageId in view.foo.DataBindings.cpx
09/10/2009 08:59:27 oracle.jbo.uicli.mom.CpxUtils$Visitor logMainApplicationCpx
INFO: file:/C:/Users/t/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/o.j2ee/drs/Application2/Application2-ViewController-webapp/WEB-INF/classes/view/DataBindings.cpx
09/10/2009 08:59:28 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
INFO: ADFc: Inicializando Ciclo de Vida da Página do ADF para o ambiente JSF, LifecycleContextBuilder é 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
*09/10/2009 08:59:28 UNEXPECTED_CLIENT_OBJECT_TYPE oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl*
SEVERE: oracle.adf.controller.internal.metadata.xml.MetadataResourceXmlImpl
09/10/2009 08:59:30 oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store

The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

Hello. I added custom http response headers to my SP site web config file as follows:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
</customHeaders>
</httpProtocol>
When I try to call any web service, i get these headers two times each:
HTTP/1.1 200 OK
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/atom+xml;type=entry;charset=utf-8
Expires: Sat, 01 Mar 2014 19:11:37 GMT
Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
ETag: "3"
X-SharePointHealthScore: 0
SPClientServiceRequestDuration: 20
SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
X-FRAME-OPTIONS: SAMEORIGIN
Persistent-Auth: true
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
MicrosoftSharePointTeamServices: 15.0.0.4569
Date: Sun, 16 Mar 2014 19:11:37 GMT
and that gives me error from ajax: The 'Access-Control-Allow-Origin'
header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
Origin 'null' is therefore not allowed access.
Any idea???

Hi Ann,
Please check whether there are duplicate custom headers in your code.
Similar issue for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support

HT1725 Purchased 3 tracks from album, but only one track has downloaded properly

Purchased 3 tracks from album, but only one track has completely downloaded, but system says that all 3 downloaded, how can I complete tracks?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Design Problem : How to design/code a java client which is deployed to all the machines in a cluster and make sure that only one of the java client is active

 hi ,
 I have to design a java client (which is basically a JMS message listener)which
 is deplloyed to all the servers in the cluster. But as these are message listeners,
 i want only one of the instance to be active at a time.
 If the server on which the client is active goes down , I want the second server
 to start listening to messages.
 How do i design this ? Also is there a public api for multicasting that we can
 use ?
 Anybody has an idea on how to go about this..
 Thanks
 nisha


Hi Nisha,
 Failover message listeners? Sounds like you want MDBs, which are deployed on all nodes in a
 cluster. If your JMS destination is a queue, then only one MDB will pick up the message. And just
 like any other ejb service, MDBs failover.
 Gene
 "Nisha" <[email protected]> wrote in message news:[email protected]..
 hi ,
 I have to design a java client (which is basically a JMS message listener)which
 is deplloyed to all the servers in the cluster. But as these are message listeners,
 i want only one of the instance to be active at a time.
 If the server on which the client is active goes down , I want the second server
 to start listening to messages.
 How do i design this ? Also is there a public api for multicasting that we can
 use ?
 Anybody has an idea on how to go about this..
 Thanks
 nisha

Dual speakers but only one at the bottom

Similar Messages

Maybe you are looking for