Dual standby why not possible asha 200

In asha 200,
while using data the other sim remains inactive & signal goes away...
I want both sim active as in other phones..
I use one sim for data n other for call,sms but whenver i use data other sim remains inactive so i miss important calls...
Plz any solution for that?

With a Nokia? Not aware of. MediaTek based Dual-SIM-Standby phones have found a solution using slower data, but staying available for SMS and incoming calls, although they are not Dual-SIM-Active.
I am not aware of such a solution in Nokia or Samsung land. For such out-of-date chipsets, you have to go for call-forwarding not to miss important calls. Alternatively, you could try an UMTS/3G enabled phone like the Nokia 301 whether this helps in your situation – depends a lot on the used network. Anyway, my tests failed with that as well.

Similar Messages

  • Why is an Active Dual sim iPhone not possible?

    Why is an Active Dual sim iPhone not possible?

    This is a user to user forum, we are all users here, just like you, Apple does not follow these discussions. If you want to tell Apple about your wishes, please use this link:
    Apple - iPhone - Feedback
    If you want to use the iPhone with more than one SIM, you'll have to buy an unlocked device or get your existing device unlocked by your carrier:
    iPhone: About unlocking

  • T400 4GB Vista or Windows 7 32 bits with PAE. Why not possible?

    Hello,
    I have read some articles about enabling 4GB of RAM in Windows Vista 32 bit version enabling PAE as discussed here: http://www.ocmodshop.com/ocmodshop.aspx?a=989
    I have tried this method and others and I have disabled DEP in Windows and in the BIOS.
    Is this possible to reach 4 GB of RAM in 32 bit OS with PAE in T400? I have read that in windows 2008 is possible (also linux) but why not in Vista32 or windows7 32?
    Cheers!
    Jorge
    Message Edited by hardaway on 02-13-2009 03:53 PM
    Message Edited by hardaway on 02-13-2009 03:54 PM
    T400 (2767-AK3)

    I mean why is not possible to use a 4GB ram in a 32 bit OS with PAE in the Lenovo T400.
    I know in other machines is possible.
    T400 (2767-AK3)

  • Remove apps from I tunes history...why not possible?

    I´d like to remove purchased apps from my I tunes history. Not just hide them, but completely delete them...so far I´ve only been able to hide them, why is it not possible to remove them completely?

    Becasue this is not a feature of itunes.

  • Net bill value - why not possible in SAP

    hai,
    I have one basic doubt. Why SAP is not showing the balance amount of the bill? ex bill value is Rs.10000.00 partpayment received Rs.5000.00  in sap for partpayment, the saparate document is creating but it is not deducting the bill amount. Why it's not showing the balance as Rs.5000.00.
    Is there any logic.
    govind.

    hai Anand,
    Like bill is Rs.10000.00 ( inv.no 100)
    Part payment 1 - Rs.5000.00 (ref inv.No 100)
    Part Payment 2 - Rs.4000.00 (ref inv.No.100)
    Part Payment 3 - Rs.1000.00 instead of that if i enter Rs.3000.00 it will also accept and in reference detail it will show the same invoice number what we have adjustedin earlier.
    while entering the part payment 3, if exceed Rs.1000.00 the system dont want to allow the entry. Is it possible.
    govind.

  • MBP 17" mid 2010 Snow Leopard Native: why not possible to install Snow Leopard in some new Hard disk?It appears "impossibile 'cause you have Mac OS X" 23.1.1."

    Guys, I want to install SL in some hard disk. It's the native OS, the one came with the MBP. But after having installed Lion, my MBP doesn't allow me to install from the original dvd of Snow Leopard, telling me "impossible because you have Mac OS X” 23.1.1. istaller".
    Someone can help me?

    hey thank you for your answers. I've written that I want to install snow leopard in a new hard disk, not over the lion. In other words, I want a hard disk with the faster snow leopard, that was the native OSX of my MBP mid 2010. But using the last procedure you suggested me, the dvd doesn't appear. I repeat, there's something changed in the firmware that blocks snow leopard.
    the comunication that appears when I insert the original dvd of SL is something like "impossible to install snow leopard because you have Mac OS X” 23.1.1. istaller".

  • Why Asha 200 doesn't support WhatsApp?

    Whatsapp is supported on x2 01 and x2 00 but asha 200 can not support whatsapp why?
    Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    Asha 200 is not officially supported WhatsApp. Actually most of the older Dual-SIM phone models were not supported. So while it might be possible to install WhatsApp on Asha 200 using the direct download link from the thread Abi99 pointed out, If you end up doing that, don't be surprised to see more or less bugs.
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming.  So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on.  But the ipad is a different story.  I have the music and artist but not one playlist  I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this. 
    Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
    I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z.  Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac.  Which I do talk highly of all the time.  But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
    I have managed to get the Imac to fix this but for some reason the IOS devices do not.   Any ideas?
    Thanks Al

  • Are free-text attributes not possible?  Why?

    I'm pretty new to MDM, just learning really.  I've done some complicated imports, in cluding hierarchies and taxonomies.
    At my company we have product records that contain product specs.  There are about 200 different specs that different products CAN have, but any particular product only may need about 20, depending on it's product type.  A perfect situation for a taxonomy with attributes, right?
    It would be, but although many specs have particular pre-defined choices (like attribute choices) , many are free-text fields where the user enters information that can't be boiled into pre-set choices.
    After playing with it in MDM for a while, it becomes clear that you can't have taxonomy attributes in MDM that are free text.  That seems kind of silly to me... am I missing something?  Is there a way to do this?  If not, why not?  It seems like a useful feature.  I can't be the first person to think of this..... 
    Any help, explanations, or ideas for alternate methods would be very greatly appreciated...
    Steve

    You aren't missing anything. Attributes can only be numeric (or couple numeric) or text. The text attributes are only available as lookups and cannot be set up as free-form text entries. Fields can be set up as free-form text, but have to be applied at a global level to everything.
    The only reason I can think as to why it has been developed this way is because of the search capabilities built into MDM. It would probably be difficult to have the parametric searching with free-text attributes, much easier when all the data is in a lookup. Another reason is just to help maintain standards within your repository. You could enter a message with SAP to find out all the reasons why it is this way and possibly enter an enhancement request for future versions.
    Basically the only way around this currently is to use the text attribute available. You could allow the users to right click on the attribute in Record Mode and select Modify to add entries to the attribute as needed.
    This obviously doesn't solve your problem, but hopefully helps clear it up a bit.
    Regards,
    Tim

  • Not poen pdf file in nokia asha 200

    Why not open pdf file in nokia asha 200

    Hi there Im also having the same problem. I thought Nokia Asha 200 would have ''very small'' font size option but I was mistaken. I wish there would be an update about the fonts. Thank You So Much! More power to Nokia 

  • HT4743 Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it have been aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..

    Hi,
    Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it's aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..
    Thanks,
    Rennuss

    Ask the content provider.

  • Why it is not possible to install apps on an SD card on a Win 8.1 tablet?

    Why it is not possible to install apps on an SD card on a Win 8.1 tablet? If it is possible to install apps on SD card in Windows phone 8.1, why is it not possible on Windows 8.1? What sort of design philosophy you follow that gives better features on
    a mobile version of the OS but not on the parent OS? Kindly explain if you can!

    Hello,
    I'd ask in the
    Windows 8.1 forum on Microsoft Community.
    As the Microsoft Community is on a different platform, we cannot move the question for you.
    Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • NTLM Authentication : why is it not possible to create more than one NTLM realm ?

    Hello,
    I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
    Can you explain exactly what is the blocking point ?
    Thanks in advance
    Regards

    Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship.  From that point it is all based on how NT/Active Directory domains work.   As long as there is a trust between the domains, you can can auth users from as many domains as you like.
    There is an agent in the works.  The ADAgent will be released with 7.5.  The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA.  At this point, current versions still require trust relationships between all of the domains touched.
    Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
    Before you configure even a single domain controller machine using the
    adacfg dc create
    command, ensure that the AD Agent machine is first joined to a domain (for example, domain
    J
    ) that has a trust relationship with each and every domain (for example, domain
    D[i]
    ) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
    Depending on your Active Directory domain structure, the following scenarios are possible:
    1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
    2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
    3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
    a. A two-way external trust relationship can be established between the two domains, D[i] and J
    b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

  • GoPro HD - Why is it not possible to use a GoPro as an external/remote camera on my iPhone?

    If I could cable a GoPro Hero HD camera to my iPhone, why would I be unable to tell my iPhone 4 to use it as an external video camera and video source? Or any USB camera for that matter?
    Why is this not possible?
    Ian

    There is no USB camera driver in iOS.
    For security reasons, none can be added by third parties.
    If they wanted you to use it, the manufacturer would write an app for that.

  • Why is it not possible to install apple remote desktop (from appstore bought earlier) on my new imac 21?

    why is it not possible to install apple remote desktop (from appstore bought earlier) on my new imac 21?

    hello Dahveed, thanks for your reply, i solved it with the help of the migration assistant from another mac - now it works (but before as more info: for my new imac it was not possible to install apple remote desktop from appstore (the install-button not available, the same as installed already...) - and i don't know why...? - is it possible that the reason is the number of owned macs?)

Maybe you are looking for