Dual video and audio with mac mini

Hi there,
I am looking at purchasing a mac mini, but would like to know if it is possible to have 2 monitors attached, but each monitor would have a different sound.
Example.
Video playing on the HD TV and then listen to music via the audio out.
Many thanks

The dual monitors is not a problem, but the audio scenario you're suggesting will only work if the music is streamed via Airplay. I believe since mini only has a single audio card, output via conventional outputs (SPDIF, HDMI, 1/8") may only work one at a time. Airplay streams music as data, and not as a signal, so that's how you'd work around that.

Similar Messages

2 different "switchable" audio output (HDMI and analog) with Mac mini

Hello,
I have a 2010 Mac mini that I use as a media center. Its hooked up to my HDTV in the living room via HDMI. I also want to hook up external speakers via the 3.5mm analog jack. These speakers are in the kitchen.
I would like to get my audio through HDMI when I watch TV and be able to get audio output via 3.5mm jack when I just want to listen to music in my iTunes library. I like to control my iTunes library with the Remote app on multiple devices.
Is it possible to switch automaticaly the audio output?
Right now I use my Airport Express to stream music from my Mac mini to the speakers but I think that the Airport isn't really needed since it lies just by my Mac mini. I'm pretty sure the mini can do both.
I've tried to hook the speakers to my Mac mini but first: I hear a "hum" in the speakers (wich I don't hear with the Airport) and second: I can't seem to get the audio out in the speakers.
I've read many posts about the audio midi settings but I can't figure it out...
Any help?
Thanks a lot.

I hit post too early... here's the rest of it.
See the Linein app- https://www.rogueamoeba.com/freebies/
See the SoundFlower app- http://cycling74.com/soundflower-landing-page/
See AU Lab- http://www.apple.com/itunes/mastered-for-itunes/
With those apps (or combination thereof)
You can copy an audio stream from one output to another.

Unable to record just audio with Mac Mini - no isight

I am trying to use Podcast Capture on a mac mini connected to a generic monitor (no isight) and it is unable to initialize the audio subsystem. I am assuming this has to do with it needing a video camera, but surely that isn't required to record an audio only podcast. I have a microphone plugged into the line in and it works successfully in Garageband. Please help!

Take a look at Soundflower, which will allow you to record audio from any source:
http://soundflower.en.softonic.com/mac
http://www.macworld.com/article/1159440/soundflower_capture.html

Dual Samsung 2343bwx Monitors with Mac Mini

I am looking to purchase the new Mac Mini Server for my lab, but have a question. I currently have dual Samsung 2343bwx monitors attached to a Windows 2008 server (please no snickers, I am replacing it with a Mac!) using UltraMon to span the desktop across both monitors. My question is can the Mini support both monitors at 2048 x 1152, and give me the same functionality I have now?
If it does support it can you tell me what connectors your are using?

Should work ok. The 2048x1152 16:9 aspect ratio on the 2343BWX is only slightly more pixels than 1920x1200.
See this thread:
http://discussions.apple.com/thread.jspa?messageID=9855163&#9855163
And spanning shouldn't be a problem, either.

Syncing controls for video and audio, with Closed Caption

Hello,
First, I have Closed Caption and audio within my slide (no audio in video, because I couldn't use Closed Caption then) but now the audio can be turned on/off from project control bar while video continues to play. I tried to add a control bar to the video (hoping I would have control over both playing and audio) but now audio is controled by project slide control bar and video is controled by video control bar.
Is there any way to sync the 2 control bars? Or at least give control to the audio on the video control bar instead of the project control bar?
Thanks,
ROV Tech

Your theory is proven false.
On the contrary, the variable framerate is the cause of sync issues and you just confirmed it.
Similarly, would you say that FCP is completely useless for all practical purposes, because it can't create Blu Ray disks?

Video and Audio with 1 second delay

I am editing on a MAC with Premiere Pro Cs6, 6.01(014 (MC:264587)) a 45 minute file from an Ipad 3, 720. The origina file is synchronized perfectly, you can play withe Quicktime viewer and the lips move with the audio. After using that single file on one sequence, and applying ONLY accelerated efects, like Zoom (motion) and RGB curves, plus audio volume up, if I play it back, the lips are ahead the audio by between 1 and 2 seconds. If I export it to H264, the same issue remains and you can see it on Youtube. This renders Premiere CS6 completely useless for any practical purpose.
Is there any way to fix this?? I am calling for support tomorrow, but wanted your opinions first.

Your theory is proven false.
On the contrary, the variable framerate is the cause of sync issues and you just confirmed it.
Similarly, would you say that FCP is completely useless for all practical purposes, because it can't create Blu Ray disks?

How to play DVD-Audio with Mac mini?

I tried to search the forums but didn't find any answers...
Mini is my only machine on living room I'm using for music, videos etc.
Apple's DVD Player won't even open the disc, but says it's "invalid format".
VLC does open the disc, but only outputs 2ch stereo in dolby surround I think.
I have an DVD-A disc with DTS 6.1 ES mix.
Thank you for any help!

Got a partial solution by ripping the DVD with MactheRipper and then opening with Apple's DVD Player. This of course means that I have to burn a copy or keep the ripped version on my hard disk...

IChat video and audio problems Mac to Mac

My associate and I have just set up video chatting with iChat, AIM accounts, and Logitech Quickcam Vision Pro cameras. I have a 12" G4 Powerbook and he has a late-model G5. We are both connecting to internet via Airports, with cable at my end and DSL at his end. After going through many discussion postings, we adjusted our settings so that Quicktime streaming was set to 1.5mbps, log on to AIM was on port 443 rather than 5190, iChat video bandwidth was set to 500, and Internet sharing was off on both machines. We can now see and hear one another, but the sound quality is very poor (we tried Skype, too, and the sound quality is much, much better) and the images we see of one another are very fuzzy and jerky (very slightly better than Skype, and our local images are very sharp and smooth). Worse, the image I see of him disintegrates (pixelates, horizontal lines, etc.) most of the time; he can see some of this on his local image of himself. The disintegration does not occur on Skype. We would rather use iChat, but obviously cannot with these conditions. I have seen no description of anything like this in any of the first 15 or so pages of discussions. Help!

Hi,
If Quicktime is at 1.5Mbps and you get this try the Bandwidth Setting at NONE.
WE suggest the 500 setting fro a couple of reasons.
Two ISPs, Comcast and Road Runner, practice Data Stream Management to combat File Sharing apps. This reduces the Internet Speed they supply to try and make these applications unworkable.
Unfortunately they can not distinguish between those Apps and iChat in an A/V chat which is also Peer-to-Peer and sending lots of data in both directions.
Other ISPs practice "Fair Usage" Policies and restrict the Bandwidth (And therefore speed) during High Use periods (but never say when those periods are).
The effect is the same as the Comcast/Road Runner issue.
If NONE still does not work try one of the other two setting in-between NONE and 500kbsp.
iChat does use a large amount of processor and Video card time and processing.
It pays to make sure you are not rendering some iMovie item or other high Processor use App.
AS iChat can be effected by Bandwidth issues Sharing the Connection you have with another computer that is downloading or streaming something from the 'Net can be an issue.
It may pay him to look in Activity Monitor (Applications/Utilities) and see what is using the Processor (Set it to All Processes then click the CPU column to re-arrange the list). Anything over about 20% may effect iChat. (vcencoder in lower case is part of iChat)
8:12 PM Friday; January 30, 2009

Fastest way to transfer video and audio from MacBook to TV?

Hello All,
Thanks for visiting my page. I would like to transfer video and audio from my Macbook mid-2010 (specs below), and would like to do so with minimum lag. I m aware Apple TV has a feature which allows me to do that, however considering it is connected via either wi-fi or bluetooth (not sure which) I feel streaming an HD movie or playing an MMO will cause significant lag and/or a distorted picture.
So with that said, what is the best way to transfer video and audio with minimal lag?
Also, as a part II of the question, will the picture be distorted regardless if my TV is 60 inches?
Thanks for the feed back!
Macbook Specs:
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software OS X 10.8.4 (12E55)

The easiest and most reliable option is to connect your Mac to the TV wired. Just buy a Mini DisplayPort to HDMI adapter and a HDMI cable to connect your MacBook to your TV. See > http://support.apple.com/kb/HT4241 Image and sound will appear on the TV automatically.
If the adapter and cable are OK, you won't get the picture distorted. Your Mac will try to use the maximum resolution the GPU allows in order to adapt the picture to your TV. It may not support the maximum resolution of the TV, but picture won't be distorted

How to combine rtp data containing video and audio?

Hi
I have a problem. I was examining with AVTransmit3.java and AVReceive3.java. I found that AVTransmit3 sending video and audio with different ports. It's okey as it is done as JMStudio. but my question is how can I receive this packets as raw bytes and combines them into one media file to play at a time in a player. May be very fundamental question but tough for me as i m novis as jmf programmer.
waitin for repply...................

Look in the JMF Guide regarding multiplexors and demultiplexors. It give the whole breakdown of how this works (and I think examples).

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV. Any way to do this?

I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.

its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording

Video and audio players will not show in Firefox. Players show in Safari and Chrome. (Mac computers). Do I need a plug-in?

Tested on 3 apple mac computers:
Mac Pro, Mini Mac and Macbook Pro.
Each computer running Mountain Lion and Firefox 11.8.800.94
Video and audio players not showing on website (video player is JWPlayer)
Error on video player placeholder says 'No video with supported format and MIME type found'
When the same site is access via either Chrome or Safari then the video and audio players show with all of the controls.

You get this error if the video tag is used and not an object or embed tag that specifies a Flash player.<br />
So this doesn't look like a problem with the Flash player as it is most likely not used in this case.<br />
If there is fall back code to use a Flash player then it isn't working.
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

Dual video and audio with mac mini

Similar Messages

Maybe you are looking for