Dual Video Issue with "K7N2G-ILSR"

Hello,
 I have an MSI "K7N2G-ILSR" motherboard with the built in video. I am having trouble getting the motherboard to work with two monitors by using the video that is on-board and an additional AGP video card. When we plug-in the additional AGP video the built on video stops working. Any help would be appreciated.
Thank You

Quote
So I can use the on-board video and my second video has to be PCI and not AGP or I can get a dual video card?
Correct.
Take Care,
Richard

Similar Messages

  • ...on-board NIC issues with K7N2G-ILSR

    After reading several posts on this issue, it sounds as if a ton of people are having problems with their K7N2G-ILSR on-board NIC.  My problem is pretty strange...  When i'm on the internet (WinXP Pro, cable modem/Linksys BEFSX41 firewall router), my NIC works fairly well.. maybe 90% of time.  I can also 'connect' to other machines on my LAN just fine.  However, if i attempt to transfer data between my K7N2G-ILSR and another PC, the LAN conenction icon flashes back and forth between 'connected' and 'disconnected.'  I also have this problem when i try to download anything...  It's driving me friggin crazy!!
    I haven't tried the MAC address solution (copying the NIC MAC address into the BIOS).  Before i give that a shot, does anyone have any updated news regarding this issue?
    Thanks for the help...  Mike

    I like to contribute a little. I bought a mother board K7N2G-ILSR upgraded my PC. First, I booted up with Windows 98SE most of hardware is working include on-board network port which connected with RoadRunner cable modem except not USB 2.0. I have decided to upgrade to Windows XP SP1. My first try of upgrading to  Windows XP looks okay for most hardware, then I found out that network is not working. After several investigation, I see no MAC address show on network driver property. I reinstall (restore from backup) Windows 98SE then network is worked fine. I memo the MAC address. Again, upgraded to Windows XP SP1, enter the MAC address into NVIDIA nForce MCP Networking Controler's property "NetWork Address". After rebooted the Windows XP the on-board network port is working perfect. This must be glich in nForce2 driver.

  • Reporting an audio/video issue with a TV show from a Season Pass? How?

    I would like to report some audio/video issues with the latest The Unit and The Seeker episodes but I can't find them in my Purchase History??? I own a Season Pass for both. Any idea how to do it? I'm lost. Thanks!

    Is this the lack of audio on "Shadow Riders"? I've just got to that episode, and I tried to report the problem, but the whole series of hoops you have to jump through seems to have changed. Rather than get to the page where you add comments for the problems, it merely sends you to an internet link on apple that has no bearing on the problem.
    If you open your account information (store > View my account) you can click your purchase history there. The theory is that you find your program, click the arrow next to it, then click "report a problem" and it should allow you to enter a comment, or the problem... Anyone else having this troubvle?

  • Tv Card With K7n2g-ilsr

    Hi,
    I recently purchased a Hauppauge WinTV GO Card for Christmas, however upon installation, the card will not allow the computer to boot up, the Card hangs the computer without even letting me enter the BIOS setup menu. Without the card occupying the PCI slot, the computer boots up just fine. I've tried it in numerous PCI slots, even one which was occupied by a 56k Modem, but the computer hangs in all slots, without letting me boot up. Prior to installation, i went through the usual procedures, i firmly grounded myself, and wore disposable plastic gloves to prevent static discharge or grime getting onto the actual card. The card was firmly attached into the PCI slot, but it would still hang the pc. Is there a IRQ problem with the card or the motherboard??
    My specs are as follows:
    MSI K7N2G-ILSR (with latest BIOS and Drivers)
    Geforce 4 Integrated Graphics
    AMD XP 2200+ Processor
    512 Dual DDR RAM  
    80Gig Hard Drive
    Windows XP Professional incl. SP2
    Hauppauge WINTV GO (the Tv card)
    Is there a possible fix for this??
    Thanks
    Khalid
    P.s is the TV Card just borked??

    Well, i have a 56k modem, which was working fine, i removed that, because i never used it. I replaced it with the TV card, and it hangs the computer on boot up. Ive tried them on ALL PCI slots, (with and without the Modem in one of the slots) but all of them hang the pc, and its annoying!
    I'll try glennvidia's suggestion, and see if it works, and no, im not using a PCI sound card, because the 5.1 soundstorm onboard is better then anything costing less than £40!
    Oh and one last suggestion, DO NOT BUY HAUPPAUGE! They still havent replied to my email! (it has been two days now!)
    Mustek is one of the companies that should be seriously considered when purchasing digital cameras! I bought a faulty mustek camera off ebay, and it was faulty, with no receipt, but they still gave me a working cam ;-) oh and they replied to my email within 24 hours, and very very friendly staff.
    MSI should always be bought as well, reply to the borked northbridge fan took 29 hours :p
    (oh and it was free postage as well!! with Gigabyte, i had to pay for the postage, and even then the northbridge heatisnk was dented!)

  • Gaming issues with K7N2G

    K This is weird to me I think I might already know the root of the problem but looking for some verification from you all.
    I have a new system using
    K7N2G
    AMD 2400+
    ATI Radeon 9700 PRO
    1gb Kingston Hyper X Ram
    Pioneer DVD-Rom and Plextor CD-RW
    Sound Blaster Audigy 2
    Seagate 40 GB 7200 RPM 2mb cache drive
    Western Digital Special Edition 40GB 7200 RPM 8mb cache drive
    OS is installed on on WD and just use the Seagate for backups.
    System is really really fast however, whenever I play games I keep getting these weird hanging moments when loading things and every game I have loaded and played crashes, installed everthing from Red Alert2 to MOHAA.  I can play for awhile but it doens't seem to last longer than about 30 min or so. My guess is that there is an issue with having the 2 drives on the same IDE channel.  Not sure what difference that would make but that's my guess.  
    Any thoughts?

    This is a RAM incompatibility issue.  I recently went through almost the same problem.  All you can do is use different ram.  I went with Kingston Value RAM.  I have the K7N2G-ILSR.  I had to update bios to 1.3 to fix compatibility.  I tried the board with Samsung, Corsair, and Crucial.  The Samsung would not work, but both Corsair and Crucial work well.  Good Luck.

  • Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

    I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through.  Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center.  Neither of these programs are able to start, from startup or even manually.  They just won't run.  Sound seems to come out fine still, but I do have video issues. 
    First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port.  I still get an image, but it's set to current screen resolution instead of 1080i.  I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens.  Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen.  I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires.  When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer.  So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
    I did try updating the software with what's available through the support site, but nothing happened.  I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software.  Giving the audio and video a complete clean slate to work from, and got no positive results.  I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv.  Problems as described above still apply.
    Anybody else have this issue?  Anybody got a fix?

    have you found a solution to this?
    My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
    I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
    *edit*
    this worked for me i stumbled across this
    I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. 

  • Video issues with macbook pro

    My 1 year old MacBook Pro has suddenly developed issues with playing all videos. They are very slow and stop constantly making viewing almost impossible. I have downloaded Flash player again but no help. I have strong internet via cable.

    I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
    Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

  • Video Issues with Boot Camp / WinXP Pro

    I have a MacPro 2.66, Radeon X1900 with a 23" Cinema HD Display.
    The problem I'm running in to was the same one I first experienced when installing XP Pro. No video. There was a video signal to the 23" display, but I got nothing other than a black screen.
    I found a solution to use a different monitor, as apparently there are some "issues" with Boot Camp and/or XP Pro and the 23" display.
    The install of XP Pro went fine on a different (smaller) monitor. It's the post-install that is not working.
    I got XP to boot up once or twice and all seemed to be fine.
    Now, when I boot back up in to XP Pro, I get a video signal and can hear XP boot up (Nice cozy XP startup music), but I only get a black monitor screen. No video whatsoever. No posting, no nothing.
    Granted, I have not done it yet, but I'm sure I can slap on the smaller tube and get XP to boot.
    I'm suspecting a video driver issue with the Radeon X1900 and the 23" display, but was wondering if anyone else had experienced this problem and what the solution might be?
    I'm probably going to have to wait to see if Boot Camp 1.2 fixes this issue....seeing how there is already an sata issue that needs to be addressed as well.
    Any thoughts?
    Michael

    Well, I'm not sure what one should do if another display isn't available. But, I was lucky to have an old 17" Cinema to use instead of the 23" to install drivers with the X1900 card installed.
    I went here...
    https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folder ID=293
    ... and downloaded their Catalyst Control Center, installed it, and went to "Advanced" to do display discovery. Then I did a full shutdown and restart.
    The 23" works now. Though, as others have said, it's black until just before the XP desktop loads (as I assume the drivers load with the desktop).
    Aside from it being a pain to get working on XP, the card screams (on both platforms)! There is a slight bit of fan noise which is pretty subtle and only seems to rev on startup/self-test but so far it's definitely worth it. I didn't think it'd be observable outside of 3D apps but with Mac OS GPU acceleration even Tiger seems faster!

  • My visit to the Genius Bar regarding video issues with Leopard

    Having video hang up issues with imove 08 and viewing videos on my webgallery. We opened a video on my web gallery on 3 computers with Leopard and two computers with Tiger at the Genius Bar. The Tiger machines allowed immediate playback where the Leopards took 3-5 minutes to view. Crazy!
    Also noticing fickering with my footage in imovie 08 which I never had with Tiger. Plus when I delete a clip in my project, my workspace goes completely black and I must go into another project open it, then back to the first project and it reappears....Very frustrating.

    DVD Drive is dead. Hopefully was the issue.
    Thanks for all the input

  • Online video issue with OS 2.0.0.7111

    I have an issue with OS 2.0.0.7111.  I can only view one online video (youtube, vimeo, etc...) successfully upon which if I try to view any other video my broswer crashes and becomes unresponsive.  When I close the browser the icon is permanently greyed out and the only way to get it back is to do a hard reset.  I've tried doing a security wipe, reverting back to OS 1.0 then reinstalling OS 2.0 and I still have the problem.  I thought it was initially a flash problem but I enrolled in the html5 program for youtube and it still occured. I recorded a video of my issue so you can have a better idea of what happens.  
    http://www.youtube.com/watch?v=ikkNr5J9sWU
    Any thoughts on a solution?

    have your tried a different wifi router or hotspot?
    have you rebooted your wifi router?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Great problems with K7N2G-ILSR onboard raid controller

    I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
    Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
    Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
    Now my raid controller seems to be dead again cause it doesnt say a word again.
    Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

    I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

  • Kingmax memory with K7N2G ILSR

    Hello guys,
    I have K7N2G ILSR maimboard with 2x 512MB 333MHz Kingmax memory. Whenever I insert this memory the system boots up once, but never again. When I insert 3x 256MB 266Mhz Sansung memory, the system works fine. I've tried BIOS defaults, everything!
    PLEASE HELP!!!  

    its easy to make little mistakes when building a pc, some manufacturers arnt always clear about anything, plus, msi havent actually told anyone that those types of memory dont work, so it's easy to overlook things, belive me i know

  • Audio problem? with K7N2G-ILSR board

    I have recently built the following machine :
    Motherboard : MSI K7N2G-ILSR
    Processor : AMD 2200
    Memory : Kingston 2 x 512MB
    Hard Drive : WD 80GB
    OS : Windows 2000 SP 3
    The problem is if the on-board audio is enabled, the system either blue screens with a STOP error where it can't find the audio system file ( which exists ) or if it does boot into Windows, explorer.exe will crash.  I have to go into Task Manager to start explorer.exe in order to see my desktop.
    If I disable the on-board audio, no problem what so ever, but of course this is not a solution I want to live with.
    I have tried to troubleshoot this myself : taken out a stick of memory, switched memory, updated the drivers to the latest, etc.
    Also another thing to note, when I finally don't blue screen, the Windows 2000 System event log will have 10-15 of the following error messages, "The driver detected a controller error on \Device\Harddisk0\DR0".
    I have told all of this to the MSI Support and they think it is either memory or a bad board not the drivers.  I have also burned in my system and no problems were discovered.
    Any help?
    Thanks,
    Wayne

    Yes, I have tried with SP2.  Currently I am using SP3, though.  I am also using Bios 1.3
    Here are my IRQ assignments.
    IRQ Number   Device
    1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
    3   Communications Port (COM2)
    4   Communications Port (COM1)
    5   NVIDIA nForce PCI System Management
    6   Standard floppy disk controller
    8   System CMOS/real time clock
    9   Microsoft ACPI-Compliant System
    12   PS/2 Compatible Mouse
    13   Numeric data processor
    14   Primary IDE Channel
    15   Secondary IDE Channel
    16   NVIDIA GeForce4 MX Integrated GPU
    20   Standard OpenHCD USB Host Controller
    20   Standard OpenHCD USB Host Controller
    20   Standard Enhanced PCI to USB Host Controller
    20   NVIDIA(R) nForce(TM) MCP Audio Processing Unit
    (Dolby(R) Digital)
    20   NVIDIA(R) nForce(TM) Audio Codec Interface
    20   OHCI Compliant IEEE 1394 Host Controller
    I have disabled the Raid in the device manager, otherwise that came up IRQ 11.
    I guess I spoke too early about not crashing, this morning it took about 6 reboots in order to finally get to a login this morning.  I would get a STOP error about not finding the audio driver.

  • Some probs with K7N2G-ILSR

    Have purchased the K7N2G-ILSR. I'm very satisfied, but I have troubles installing everything.
    Configuration:
    AMD ATHLON XP 2800+ BARTON BOX  
    DDR 256MB PC-333 Marke PC2700  
    SATA SAMSUNG 80GB SP0812C 8MB  
    TEAC 48/16 DV-516E BULK TRAY  
    LITE-ON 52/32/52 LTR52326 IDE SMART
    * The K7N2G-ILSR does not recognize my processor (AMD Athlon XP 2800+ BARTON 333FSB)properly. This processor should work at 2083Mhz, I cannot get it higher than 1250Mhz (Can only select 166Mhz fsb). Do I have to upgrade my bios? I have one DDR module installed, 333Mhz PC2700.
    * After I install windows XP (during installation Windows warns me I do not use Windows XP certified drivers for the promise raid. But I use the disk provided by my motherboard) everything is okay. After that I install the promise raid drivers and the vga drivers from the cd. All goes well. Then I install the nforce chipset drivers and everything gets messed up. The computer crashes during installing the sound system. Seems like a serious crash. When I restart I cannot acces my dvd drive or my cdr drive. My SATA harddisk seems to be okay. Is this a common problem?
    Any help would be much appreciated. Thanks you!

    Wonkanoby thank you fopr your quick reply. I'll try setting ddr/fsb ratio 1.1 I believe I already set the fsb to 166.
    I'm sorry I'm at work now, I can't look for my psu max amps now. I believe I bought a 350W power supply. That's all I know for now.
    During installation of Windows XP I needed to install third party RAID drivers. I used the disk that came with the motherboard. After windows copied the files to my harddisk, the system reboots and installs my hardware. Then I get the message that the drivers are not signed by microsoft. I assume those are the drivers for my raid controller, since I only put in the windows CD and the MSI floppydisk.
    After I click yes, everything installs as it should. Thats it for the windows xp installation. System boots, but needs drivers for VGA, sound, etc...
    I install the vga drivers, the raid drivers, everything is okay.
    But then I install the nvidia chipset drivers, which probably include the nvidia ide driver too. The system hangs while or after installing the sound dirvers.
    As for the IDE drivers: I already tried to rollback the drivers, but windows says there is no previous driver.

  • Raid problems with K7N2G ILSR

    I have the following setup and problem:
    K7N2G ILSR
    NEC DVD-+RW 1300A
    Seagate SATA 120gb HD
    350W PSU with "210" 3.3 + 5.0
    BIOS V 1.4
    2 x Hynix 256mb DDR 333
    I was able to setup the SATA drive as a single RAID drive and install XP pro.
    Now, 9/10 times, the system will not boot.  I receive a
    "No drive attached to fasttrak controller"
    message.
    When the system DOES boot, it works great, and I can leave in on for days with NO problems.
    I know the Hynix memory is not "approved", but since the system is stable (when it does boot), and assume its not a memory problem.
    The problem still occurs even after:
    I changes the SATA cable (data and power)
    I changed the DVD cable and slot (1-3)
    I even disconneced the DVD and / or Floppy.
    No change
    Help!!!!!

    I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

Maybe you are looking for