Dual Xeon (with HT) box and SINGLE CPU WLS Licence

Can I install WLS 8.1 on this box and run it - or will it refuse as it sees 2 processors (2 physical + 2 logical) - or do I have to remove one of the CPUs or buy a 2nd licence. Due to a mix up we have this mismatch.
I have other apps on the box which will probably need the extra CPU power of the 2nd real cpu, but don't want WLS to attempt to use it or get upset and not work at all.
M.

Khosro,
Neither configuration would be ideal for this: The Xeon configuration's CPU clock speed is far too low to do much good while the i7-4790(K) configuration has only four physical cores.
Furthermore, Ray-Tracer 3D acceleration is now EOL (End-Of-Life): Adobe is no longer developing this type of 3D GPU acceleration any further. It is going with something else for 3D rendering, which currently may not be GPU-accelerated at all.
Thirdly, how much is the most are you willing to spend? You see, what Eric suggested may be priced far higher than your maximum budget permits, judging by the current prices for the RAM, CPU and motherboard.

Similar Messages

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix it? I'm trying to upload the PDF version to Vistaprint. Thanks.

Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

I bought iphone 5 with there box and accesaries by third hand now i dont now the icloud id which first person put it now the iphone 5 stuck on icloud activation page. it is not teaft

i bought iphone 5 with there box and accessories by third hand now i dont now the icloud id which first person put it now the iphone 5 stuck on icloud activation page. it is not theft

are you stupend or clown,because how and the word he is gonna find the first person when i am pretty sure he doesnt even keep in touch with the person who he purch in the first place...Nabeel that is a lot of suck and i know whats that i am stuck in the same situation to...and i celled apple sopurt and they asked for a lot information and when i sent to them they just said to me that they not able to help me with that...i have spake with to many people in apple and the funny part is that everone has diffrent answer..

PDF prints with little boxes and question marks

I prepared a document in Microsoft Publisher 360 and created a pdf with creative cloud.
Looks great and prints great for me.
I emailed it to a few people and it looks great on their screens. However, when they print it,
it comes out with little boxes and question marks.
If I email them the publisher file it is fine.
How I can get them the PDF file without all the odd markings?

You probably used a font that is not on their system and did not embed the font in the PDF when you created it. Don't feel bad. We all have done it. Just make sure to embed your fonts in the Joboptions settings before you recreate the PDF.

Any experience mixing with VRM box and Logic?

I was interested in anyone's experience using Focusrite's VRM box and Logic.

Someone mentioned the BSF2000. I have the same and it is very useful.
In the default BSF mode there is no feedback into the sliders (they don't move with existing automation), however you can send up to 117 CCs, PCs and some other kinds of data on each preset from up to 16 MIDI chanels and Logic picks them all up with no problems.
However, you can start the BCF 2000 in Logic Control mode, (for those who have BCF 2000 and haven't seen this option yet, swith off the BCF 2000, then swith on holding down the 3rd upper button– the one just below the Parameter rotary controller. When you start the display will show LC instead of bC. To return to BCF mode, restart holding the 1st upper button, the one just below the Type rotary control.) install the Logic control driver in Logic and you have feedback into the faders and rotary controls. The downside of the Logic Control mode is that is doesn't have instructions and I've spent days trying to work out what all the presets are.
Remeber too in BCF2000 mode you can not only use the controls to manage automation of ANY midi parameter, but you can also use them to replace keystroke shortcuts. eg I have one button that toggles all tracks between latch and read, another that moves through screen sets another that shows and hides global tracks etc.
Well worth every penny.
Peter
G4 Tower 1.2g GHz Dual Mac OS X (10.4.2)
G4 Tower 1.2g GHz Dual, 2GB RAM Mac OS X (10.4.4)

Dual Booting with Windows 8 and 7 Pro in a G6 - 2235us Notebook

I have a G6 - 2235us Notebook 64 bit that came with Windows 8.0 installed.
I would like to install Windows 7 Pro and make it dual book with Windows 8.0 with 7 as the default to start.
Would you please give me steps as to how to proceed and also the drivers, etc I would need to download.
Thank you.
This question was solved.
View Solution.

Thank you Paul. I understad I just have one more question:
I found this page that gives info about dual booting:
http://www.pagestart.com/win8dbwin701181301.html
From your expertise, would you say the steps suggested on that
page could succeed for making Win 8 and 7 dual boot in this particular machine?

Webpage looks good with tranparent boxes and photo background in live view but not in browsers

If anyone has time to help I would be very grateful.   I am new to dreamweaver and am trying to make a webpage with transparent colums and boxed text using styles. It looks perfect in "live view" but when I look at it in any browser all formatting is gone. It looks like the background with text on top layed out wrapped across the entire page.   I have not been able to figure out what is wrong in days of searching. Does anyone know the answer?
This first the format I want and is what it looks like in Live View, the second is what it looks like in most browsers.
Here is the code I used:
</style>
<link href="../styles/tcastyles.css" rel="stylesheet" type="text/css">
<style type="text/css">
body {
          background-image: url(bamboo.JPG);
          margin-left: 150px;
a:link {
          color: #600;
          text-decoration: none;
a:visited {
          text-decoration: none;
a:hover {
          text-decoration: none;
a:active {
          text-decoration: none;
          font-family: Verdana, Geneva, sans-serif;
          font-size: 12px;
          font-weight: bold;
a {
          font-size: 12px;
body,td,th {
          font-family: Verdana, Geneva, sans-serif;
.container .faqs h2 {
          line-height: 40px;
.container .faqs ul li {
          text-align: left;
.footer {
          padding: 5;
          position: relative;
          clear: both;
</style>
<div class="container">
<div class="header"><span class="menutable"></span><img border="0" src="navigate_projects.jpg" width="307" height="167" usemap="#FPMap0" alt="The Conservation Agency - Project Menu" align="absmiddle" />
    <map name="FPMap0">
      <area shape="rect" coords="132, 112, 172, 127" href="asia.htm" alt="Asia" />
      <area shape="rect" coords="138, 92, 286, 110" href="west.htm" alt="Western Hemisphere" />
      <area shape="rect" coords="138, 73, 279, 89" href="flamingos.htm" alt="British Virgin Islands" />
      <area shape="rect" coords="131, 55, 249, 72" href="turkscaicos.htm" alt="Turks and Caicos" />
      <area shape="rect" coords="121, 35, 244, 52" href="newengland.htm" alt="Narragansett Bay" />
      <area shape="rect" coords="103, 17, 306, 32" href="coyote.htm" alt="Narragansett Bay Coyote Study " />
      <area shape="rect" coords="121, 128, 173, 144" href="pacific.htm" alt="Pacific" />
    </map>
</div>
<div class="menu">
    <table width="100%" border="0" align="center" id="menutable">
      <tr>
        <td height="30" align="center" valign="middle"><p><strong><a href="mission.htm">Mission</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="pubs.htm">Publications</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="projects.htm">Projects</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="opps.htm">Opportunities</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="sponsors.htm">Sponsors</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="coyote.htm">NBCS</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="guana.htm">Guana</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="tca.htm">Contact us</a></strong></p></td>
        <td height="30" align="center" valign="middle"><p><strong><a href="index.htm">Home</a></strong></p></td>
      </tr>
    </table>
</div>
<div class="banner">Narragansett Bay Coyote Study</div>
<d/div>
      <div class="box739">
        <h3>What does NBCS Do?</h3>
        <p>Since 2004 The Narragansett Bay Coyote Study (NBCS) has been developing science-based coexistence and management strategies for our newest top predator. Coyotes, originally a prairie species, have successfully colonized all parts of the continental and nearshore us in the past 100 years. They reached the islands of Narragansett Bay in the mid-1990s. Since then coyotes have become increasingly abundant and problematic in some island communities.</p>
        <p>In our history of cohabitation with coyotes people consistently tried to eliminate them by hunting, trapping, and poisoning. Lethal removal worked for individual problem animals but did not work as a population control strategy. Why? Coyotes have intrinsic physiological and behavioral abilities to control their own numbers. If coyotes are removed they increase reproduction and numbers rapidly rebound. The critical population regulation trigger is competition for food. As long as coyotes are well fed (with few coyotes competing for food) their populations will grow. </p>
        <p>It is also known that opposite effect occurs if coyotes if coyotes are stressed by competition for food. If there are too many coyotes competing for the food available coyotes will drop the the level sustainable by those resources.</p>
        <p>Understanding this relationship, NBCS scientists decided to study the resource use of coyotes on two islands in Narragansett Bay, Rhode Island. We used GPS tracking collars to find out where the coyotes were spending thier time. We theorized that if we could identify important coyote food resources - and control them - the coyotes would bring their own numbers down. NBCS calls this "passive coyote management."</p>
        <p> Since 2005 when we trapped and collared our first island coyotes we have continually found that the most important food resources to our study are provided by people. That means they are within our control That means we can control coyotes. If we remove anthropogenic resources (human subsidies) coyote numbers will drop to the level sustainable by natural resources. When coyotes are sustained only by natural prey (mice, woodchucks, rabbits, geese, and deer) coyotes numbers will be lower and they will provide helpful pest control services. </p>
        <p>Based our scientific data NBCS generated a set of <a href="coyotes/Best Management Practices for Coexistence with Coyotes - Nov 8 2010.pdf" target="_new">Best Management Practices for Coexistence with Coyotes</a>- basically a toolbox for safe, sustainable, community coyote management. We are working with the towns in our study area to adopt the CBMPs and be the first community in the nation to successfully and sustainably manage coyotes. We also believe other cities and towns might be able to use our results as a template if they are experiencing coyote problems. We have only just begun to implement the CBMPs on our islands. We hope in the near future to have all our towns implementing the CBMPs - only then will we see the full impacts they make on coyote numbers and behavioral problems. You can follow our progress on this website.</p>
      </div>
      <div class="footer">
        <table width="100%" border="0" cellspacing="5">
          <tr>
            <td>Return to top</td>
            <td><a href="mailto:[email protected]">[email protected]</a></td>
          </tr>
        </table>
      </div>
    </div>
</div>
<p> </p>
</div>iv class="faqs">
    <h2>FAQs</h2>
    <ul>
      <li>How do coyotes control their own population numbers?</li>
      <li>bla bla bla</li>
    </ul>
</div>
<div class="content">
    <div class="clearbox">
      <div class="col1">
        <h3>Middletown Adopts the CBMPs and passes a No-Feeding Ordinance!</h3>
      </div>
      <div class="col2">
        <h3>Pilot, Java, and the Valley Pack</h3>
      <
And here are the styles:
.container {
          height: 1500px;
          width: 975px;
          border: 8px solid #660000;
          float: left;
.header {
          float: left;
          height: 170px;
          width: 975px;
          background-color: #033000;
.menu {
          background-color: #FFC;
          float: left;
          height: 30px;
          width: 975px;
          font-family: Verdana, Geneva, sans-serif;
          font-size: 9px;
          color: #660000;
          font-weight: bold;
          margin-bottom: 5px;
.table {
          font-family: Verdana, Geneva, sans-serif;
          font-size: 8px;
          font-weight: bold;
.banner {
          float: left;
          height: 100px;
          width: 739px;
          font-family: Verdana, Geneva, sans-serif;
          font-size: 37px;
          font-weight: bold;
          color: rgba(0,51,0,1);
          background-color: rgba(255,255,204,.7);
          text-align: center;
          line-height: 75px;
          border-radius: 5px;
          padding: 5px;
          margin: 5px;
.clearbox {
          float: left;
          height: auto;
          width: 760px;
.box739 {
          width: 739px;
          float: left;
          height: auto;
          background-color: rgba(255,255,204,.7);
          font-size: 12px;
          color: rgba(0,51,0,1);
          border-radius: 5px;
          padding: 5px;
          margin: 5px;
.faqs {
          float: right;
          height: 620px;
          width: 205px;
          font-family: Verdana, Geneva, sans-serif;
          font-size: 12px;
          font-style: normal;
          line-height: normal;
          overflow: scroll;
          background-color: rgba(255,255,204,.7);
          margin: 5px;
          border-radius: 5px;
          font-weight: bold;
          color: rgba(0,51,0,1);
          text-align: center;
.col1 {
          float: left;
          height: 500px;
          width: 359px;
          background-color: rgba(255,255,204,.7);
          font-size: 12px;
          border-radius: 5px;
          color: rgba(0,51,0,1);
          margin: 5px;
          padding: 5px;
.col2 {
          float: left;
          height: 500px;
          width: 359px;
          background-color: rgba(255,255,204,.7);
          font-size: 12px;
          border-radius: 5px 5px 5px 5px;
          color: rgba(0,0,0,1);
          padding: 5px;
          margin: 5px;
.footer {
          position:relative;
          clear: both;
          background-color: rgba(255,255,204,1);
          font-size: 12px;
          color: rgba(0,51,0,1);

Helo thanks for responding . I think it uploads... It says it does as an assocaiated file when I put to the website. But that sounds like it is the issue. Those format commands seem to be the one it is ignoring. I am not familiar with html but I see that the href command is what identifies the path to the file I call TCAStyles. I notice that dw puts all my files in a local public file and the structure is different - with no public file - at the site.
I am not sure what the 2 dots in the href command mean - there is not a full path. Is this command valid? I will try to look into the directory structure on local and remote site and will check for files.

Problem with combo boxes and the reset button in certain situations

Hi Everyone,
i have a problem to make the reset-button function properly in an what-if analysis dashboard.
The dashboard uses two combo boxes that are not visible at the same time. In my application the second combo box only appears when a dedicated menu (label based menu button) has been activated.
So i have combo box 1 when menu A is active an dand combo box 2 when menu 2 is active.
After starting the dashboard initial values are fine. If you then directly change to menu 2 (seeing combo box 2 with
the correct default value) and press the reset button, the dashboard returns to the initial view, showing
the menu 1 with the correct default value. If you now switch back to menu 2, you will see, that the combo box 2
is empty (i.e. nothing selected).
I also tracked the destination cells for the combo box value results as well as the source cells for the "selected item" and the
destination cells for the "Insert Selected Item". All this values seem to be correct. Therefore i assume that
this is an issue of event handling. Maybe the combo box 2 does not refresh its selected value because it is already
invisible when the values are restored.
This case can easily be simulated by placing two combo boxes and a push button (that changes the visibility of
the combo boxes) and the reset button on the canvas.
Maybe someone can help. I am able to provide a test xlf, if neccessary.
Thanks,
Oliver
P.S. I am using Xcelsius SP4 (Version 5.4.0.0)

Hello Debjit_Singha_86,
thank you for your support. At the moment i have the following setting:
label based menu
- General: Insertion Type "value" from a list of ID's for the menu-items to a dedicated cell (current menu ID, say tab1!$A$1)
- Behavior: Selected item (position) fixted to item 1
hidden combo box
- General: Insertion Type "position" to a dedicated cell with the current choice (say tab1!$B$1)
- Behavior: Selected item (position) to the same cell (tab1!$B$1)
Can you give me a hint on how to connect the two components according to your solution, so that the label based menu sets the default for the hidden combox box only in case, that the reset button is pressed?
Thanks,
Oliver

How to use Dual monitors with G5 Mac; AND How can the image in "Develop" be made to look like wh

Two questions: How can I use my dual monitors on my G5 Mac?
How can the image in "Develop" be made to look like what it will print, just as it is
done in Photoshop with view>proof setup.

Still wondering what tool is available in LR 1.1 to "view proof"
As in Photoshop CS 3, and previous versions of PS, in view I can
choose the custom .icc profile of the printer, to view what the final
print will nearly perfectly appear like.
What tool is available in LR 1.1 to do the same?
Equipment: Mac OS 10.4.10; dual monitors; Epson Pro 9600 and SPR
2400, both dedicated to matte black ink. Color working space is
ProPhoto RGB. I stay in 16 bit.

Aspect ratio issues with SD box and no help from Verizon

I just renewed my 2 year contract which included a free box but a billing screwup resulted in repeated charges for the box. A CS rep credited the account and said I had the wrong box and she would send out a new one.
i had a 7100 Motorola HD box. I have an older television set (that cannot control aspect ratio) and I have never had HD service but this was the box I was sent by Verizon as part of my contract. Why they felt it had to be changed I don't know, but ..... the box they sent was a 2500 SD box which does not give me an acceptable picture.
It's totally random. Some channels are 16:9. Some are overzoomed 4:3. The FIOS channel bar at the bottom is partially off the screen and the content is clipped around the edges. Commercials are totally random in size and appearance.
The # key on the remote does not work. There is no option in Settings to change the aspect ratio.
CS was ZERO help. They concluded that I had to either deal with the scattershot image sizes and clipped image content or go buy another television. SERIOUSLY VERIZON?
I couldn't get an answer as to why the box I was sent by Verizon as part of my original contract that provided a perfectly acceptable image had to be replaced with a box that doesn't provide squat. I have had Verizon service for approximately 7 years with this same television and this is the first time I've been given a box that can't produce an acceptable image and a remote that can't resize. So why now?
This smells like a bait and switch, or an attempt to get customers to pay for an upgraded box for a service they don't want just to get an acceptable picture. I live in an urban area and there is plenty of older equipment in these homes. So are customers like myself just being told even though you pay a significant amount of money for a Triple Play you are only getting 2 parts of the service?
I find it hard to believe there isn't some way to make the box or the remote change the image size. Can anyone help?

why do so many topics go to private section? we need to see how it's responded to in case we have the same problem..
but yes, our 2500 sd box, basically the 4:3 standard non HD box broadcasts to fit a 4:3 TV.. now some channels will have the black bars on top and bottom to accommodate the 16:9 aspect ratio.. you'll notice this if you run the 2500 box on a flat screen.. if you have it in 16:9 ratio on a flat screen it looks stretched.. the only way to watch regularly is in 4:3 mode.. which basically has the image with bars on all sides.. or you can zoom it and lose a portion of the image.. but it's because the box thinks you're using a 4:3 sd tv so the boxes appear on top and bottom so it can still fit the wider image it's filmed in.. so with flat screens you need the HD box i guess.. unless there is something i'm missing but there isn't a setting that i can find to change how the box exports the image for a flat screen or 4:3. I know the HD boxes have an 'SD Override' option.. which i guess tells the box you're not using a 4:3 tv anymore.. but that option is not on the 2500 SD box.. believe me i looked.. but this is all in reverse for your issue anyhow as you're having trouble with the SD box on an SD TV... which yeah, if you run SD the quality of picture is not as good as the HD programming.. so please let us know what they say to do for you.

B&W HTM61 S2 arrived with gouged box and broken foam padding

Purchased a Bowers and Wilkins HTM61 S2 at a Newington, NH store and had it shipped to my home. It arrived with a corner showing signs of being dropped, a large gouge on one corner, and when opened the foam inserts were broken and in pieces.
My concern now is if anything has been damaged internally either to the woofers, tweeters or midrange driver. If this was to be a gift I certainly could not give it as a gift given the poor condition of the box and its packaging content.
I am very disappointed that this item was shipped in its original box and makes me wonder if it was already damaged and shipped as-is.
The entire purchase has been very stressful and has left me doubting the longevity of my purchase given the poor condition of it's packaging.
I'd rather exchange for another, one that hasn't been beaten up or dropped or gouged however the associates in Manchester, NH have none in stock and nobody else has one either..

Hello Mitty,
Welcome to the Best Buy forum!
The concern you have for the product is understandable, especially if the box appeared to have damage when it was delivered. You obviously did not pay for a damaged product. A majority of products shipped by Best Buy are shipped in a UPS or USPS box; however, a product that is quite a bit larger than other products (such as a TV) may be delivered in its normal box. Either way, I would expect a product to be handled with care so that it is not delivered with any sort of damage.
If you want to return or exchange the speaker, then I would encourage you to go back up to the store and speak with an associate. You have within 15 days from the day the speaker was delivered to process a return or exchange. While looking over your account, I noticed that you went back to the store this morning and processed an exchange. I trust that the store was able to assist; however, if you have any additional questions, then please let me know and I will see what I can do to help.
Thank you for taking the time to connect with us, and I hope you have a great day.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Display issue with Combo Boxes and Logo

Hi All,
I am facing a couple of issues with my dashboard:
1. Combo boxes display - I have placed a series of combo boxes one below the other. During the preview, when I click on the first combo box, the values spread below. That is, the labels, and options of the next combo box are also visible. The options in the combo box are not seen clearly. I have tried many permutations and combinations with "Bring Forward +" and "Send Back -" but none of them seem to work. For example, keeping the first combo as bring forward and next one as send back etc. Can you please help me in this regard?
2. Logo - I have used image component and embedded a logo from my local system. Later I saved the xlf in the repository. When I import the xlf from the platform, it displays the logo fine. But however, this behavior is not constant. It sometimes doesn't show the image. Do I have to save the image also in the repository? or in a common shared folder? If I embed the logo does it not mean that the xlf hold the copy?
Any help in this regards is highly appreciated.
Thanks and regards,
Sandeep.

Hi:
For your question
1) Do you need your combox overlapped? I tried to overlap my comb box and preview it, seems works fine for me. it only chooses the first comb box. But I am suggesting that if you want to show/hide the different combox in the same position at run time, you can try to control the visibility by some other component.
2) The answer is NO, the image embedded in the image component will be saved to xlf file, there is no need to save it individually. Try to clean your cache files in your machine and do it again.
Hope it helps.

Photo replaced with a box and question mark

I see photos in the I photo library, but when I click on them to see the single picture in a larger view instead of seeing the particular picture, I get a square box with a question mark in it. It doesn't happen with all my pictures, just 80 percent, which is very frustrating since these are the most recent pictures from a vacation. This just started with the recent upgrade to I photo 6. I have ibookG4 running OSX 10.4.8

SwissCanadian
Welcome to the Mac and the Apple DIscussions.
In general, it's a good idea to create a new thread for a new query.
To your specific questions:
1. however, it drives me crazy that I can't simply add more photos to an existing roll in the library... it always creates a new folder. How do I stop iPhoto from doing this?
You can't. But you can move photos from Roll to Roll in the iPhoto Window, and this will be reflected in the Finder. Just a you can rename Rolls etc., all via the iPhoto Window.
2. Is there any way that I can retrain the programme to find the photos that I have moved?
No, sorry, the best you can do, if you cannot return things to the way they were, is to create a new library and start over. To rebuild the library: move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find there the Originals folder. From there drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
A general comment: iPhoto is a photo organiser, with built-in image viewer, version control and lightweight editing. The key concept is that it's a photo organiser, a database. Like any database it needs you to manipulate the data via the iPhoto Window and not any other way.
When you rename things in the iPhoto Library Folder, or when you focus on the iPhoto Library Folder you're missing the point. You do your work in the iPhoto Window, and apart from backing up, forget about the iPhoto Library Folder. As Phillyphan points out, messing with the iPhoto Library Folder is like opening the bonnet on your car and re-arranging the wiring there. With the same results! Or as I sometimes put it, iPhoto is a photo organiser, why do you then re-organise what the organiser has done?
Most people who reorganise the iPhoto Library Folder do so because they are afraid that they will be unable to find the photos should they need them. Well, there are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
By all means post back if you need any further clarifications or help.
Regards
TD

Dual Boot with Windows XP and Windows 2003

I am trying to install Dual operating system on my T61 Thinkpad as below.
1.Installed Windows XP on C Drive Default Factory state
2.Installed Partition Manager
3.Created new partition between Preload[C:] and SERVICEV001[*:] in NTFS format using Install another Operating system option.
4.During Installation of Windows 2003 Server when system got rebooted it is throwing following error and unable to complete installation
<Windows Root>\system32\ntoskrnl.exe missing or corrupt.
Could any one help out...
Regards
Aerra

Well, that is an odd error you are getting with the latest GPIB driver, but it is perhaps most closely linked to the fact that Windows Servers aren't officially supported OS'. We do know of customers that had Windows Server 2000 where the drivers for a Windows 2000 PC worked well on the server, but once again the Server is technically not a supported OS. Anyhow, the latest driver for XP should probably work for the Windows Server 2003, however it has not been tested by NI.
To clarify, every single response from your GPIB device included "? At" at the beginning? Does that include testing in MAX or LabVIEW or is it just with IBIC?
Logan S.

I have downloaded Firefox 6.. tried 7, and it will not connect once I attempt to open it initially. It comes up with blank boxes and notation states "waiting on firefox".. not sure what to do

I had an issue with firefox opening zygna games on facebook last week. I uninstalled firefox and reloaded it. Actually tried it last week a few times and today tried Firefox 7 and then Firefox 6, which i now have on computer. When it goes to open initially, the screens come up blank. There is a little popup that I believe asks if i should set firefox as main browser, however no dialogue in the box. The notation on my computer says "waiting for firefox" and it just sits there.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Dual Xeon (with HT) box and SINGLE CPU WLS Licence

Similar Messages

Maybe you are looking for