DualCoreCenter error - "Dual Core Center does not support!"

Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
Anyway, I let it do the repair and install itself.
Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
Can someone shed light on what that means please.
Thanks...

It means:
I suck, don't use me!
Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
Have a look through: here

Similar Messages

"Dual Core Center does not support" error msg on K9N Platinum

Hi,
I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
Thank you.

Oh ok.
Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that.

"Core Center does not support your motherboard" MSI P965 Neo Mobo

Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667 3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor 16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate 16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows Updates

Hi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer

K8T Neo - Core Center does not support your motherboard!

I installed the latest version of Core Center utility on Windows XP x64. But if I attempt to run it "Core Center does not support your motherboard!" is displayed. The download website clearly states that Windows XP x64 is supported. The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86.
Any suggestion is appreciated.

Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
   MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
   MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
   MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
   MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used.

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Cat0-3750 upgrade. Error: system number 1 does not support the same feature

I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
Ios Image File Size: 0x00877A00
Total Image File Size: 0x00B04200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-37.SE1
Image Directory: c3750-ipservicesk9-mz.122-37.SE1
Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support the same feature set.
Any ideas?
Chris

I was having the same issue even with entering the following:
archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
I noticed the image which was running on the switch was correct without the ".bin" at the end:
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
[OK - 24893440 bytes]
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (100 bytes)
extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
extracting info (100 bytes)
System Type:             0x00010002
Ios Image File Size:   0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix:          sm10g-150-2.SE7
Image Directory:       c3kx-sm10g-mz.150-2.SE7
Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version:    03.00.78
Updating FRU Module on switch 1...
Updating FRU FPGA image...
FPGA image update complete.
All software images installed.
Worked for me, hope this helps.

Error: Device type SWIN does not support page..

Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-Dharmesh

Hi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick

When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

If you're referring to streaming via itv.com, the minimum system requirements can be found here.

HT4108 Digital AV adapter does not support iPad 2. Error message "This accessory does not supported by iPad"

Just bought latest digital AV adapter MD098ZM/A. Does not work with my iPad 2. Error messade" this accessory is not supported by iPad" while the package saying it supports iPad 2 and later.

It's works with the new iPad. It said "accessory not supported". I clicked OK and now it works.

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

Why do I get this error message "This volume does not support permanent version storage."

I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....

According to Apple network volumes do not support built in 'versions'…
OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
If in doubt Google the error text with any personal info removed.
Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
http://www.git-scm.com
I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac).

Exchange 2007 New Install Error - Read only MultiValuedProperty does not support this operation

Existing Server/Exchange 2003 environment. New 2003 R2 x64 server fully patched and updated with no other apps installed attempting to install Exchange 2007 SP2.
Initially I was getting the error "Could not find the default Administrative Group ‘Exchange Administrative Group (FYDIBOHF23SPDLT)’". This I
fixed by completely uninstalling per this Microsoft article,
this Microsoft FixIt article and this recommended blog post, ending with
setup.com /preparead. I'm making progress, because now I'm getting a new error attempting the install. Specifically, Hub Transport installation fails with "Read only MultiValuedProperty does not support this operation."
Executing
setup.com /prepareSchema fails. I've set the msExchVer attribute for CN=Offline Address Lists to 4535486012416 and gotten no change, the install still fails. This
Googled page exactly describes my problem, and all anyone could say was to add this version number. It doesn't work. Pretty much none of the threads I've read have a resolution beyond this. I'm stumped, any help would be greatly appreciated.

What's the error message when executing setup.com /prepareSchema fails? failed at Organization Checks?
Could you please check whether you are on the right schema version?

Error msg says browser does not support HTML5 video. My FF and Flash up to date. Now what?

Accessing bird nest cam on Cornell website. Plays well on PC. For my Samsung phone error says "==browser does not support html5" Updated FF for Android and Flash for Android, restarted phone and got same error message. Settings set for tap to play. Help

Hi midlovines
We need more troubleshooting details to help you:
# What Android phone or tablet are you using? What version of Android OS (4.0 Ice Cream Sandwich, 4.1-3 jelly bean, 4.4 kitkat or 5.0 lollipop etc)
# Please provide the URL of the "bird nest cam on Cornell website"
Cheers!
...Roland

Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

I have done a similar set of things and no results.
This is really odd, Mac Mail works other emasil clients work, just not Outlook.
The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time. I ended up having to reset mine.
Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

DualCoreCenter error - "Dual Core Center does not support!"

Similar Messages

Maybe you are looking for