DualPhone: "system busy" or "Skype-line is busy" e...

My skype phone is not working anymore, despite a subscription for unlimited calls in Europe. It says: "system busy" when dialing a land-line (skype-out), or "skype-line is busy" after restarting the phone. However I can receive calls without problems. This happened after our subscription for unlimited calls in Europe ended and we renewed it a few days later (coincidence?). The subscription is not active, but the error message still appears...I would appreciate your assistance in this matter. Many thanks.

I would suggest resetting the device to factory even if loose your presets. You might also consider changing out the phone/data cables for your base station just in case.
On my Skype device I've had new changes to my account not take until I reloaded the unit. In the past in my dial-up days I've had busy signals, intermittent noise, and other failures all due to a bad rj11 patch cable. After fighting my issue for years, once discovered, I tossed it in the garbage. Even though I can fix a phone cable it was not worth the effort or hassle.
Ultimately the unit may have gone defective and only an in/out of warranty repair will fix the issue. You might also consider connecting with another account just to see if you can dial out 800 numbers under that account.

Similar Messages

Business System/Business Service

Hi All,
Can anyone let me know what are Business System and Business Service.
Regards,
SP

Hi
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Business systems:
Business systems are logical systems, which function as senders or receivers within PI. Business systems can be SAP systems or third-party systems.
Depending on the associated technical system, the following types of business systems are defined in the SLD:
Web AS ABAP:
A business system, which is associated with a Web AS ABAP.
A business system, which is associated with a Web AS ABAP, can play the role either of an application system or an integration server. An integration server is the central component of PI, which provides a framework for the exchange of information among various internal and external entities of a company. The integration server facilitates the interaction between the different operating systems and applications across internal and external networks.
Web AS Java:
A business system, which is associated with a Web AS Java.
Standalone:
A business system, which is associated with a standalone Java application.
Third-party:
A business system, which is associated with a third-party technical system.
Technical systems:
Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
Web AS ABAP:
Regard's
Chetan Ahuja

Outbound error "No cross-system business area has been assigned to bu. area

Hi everyone,
i have idoc failed in outbound with error No cross-system business area has been assigned to business area 0001
Thanks in advance
Soufiene

Hi Fernando,
The issue is from HR , an entry for an employee was entered and suppose not it generated idoc failed.
Thanks
Soufiene
Edited by: Soufiene Tchantchane on Sep 7, 2011 10:32 PM

How to Create Software components , Technical systems , Business Systems

Hi,
How to Create Software components , Technical systems , Business Systems and Logical Systems
and Link between them. foe different adapters.
Ponts will be awarded..
Regards,
Jayasimha Jangam.

Steps to create software component,
1. Goto SLD --> Software catalog
2.select new product
3.Fill the Vendor, Name , version and choose create
4.now go back to the SLD main page and then choose software type as sofware component
5. select new component and in the next page select your product which you have created in the previous step
6.then give your vendor, name and version and choose create
7. now the sofware component is created, you can import the same in you integration repository for your scenario
Go through the following link which gives you a clear idea about technical, business systems,
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

Project Systems Business Content - Residual Order Plan

Hi all,
I a issue which I hope someone can help me with:
I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
Many thanks,
Leo

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

Project Systems - Business Content

Hi,
We are trying to install Project Systems Business Systems. We are in process of creating technical specs.
In the help.sap.com or best practices ,There is no detail explanation is available (Source field,source table or logic to get the field).
Some of the data sources don't have documentation.
I hope many of you implemented Project Systems.
Please share your experiences about finding Source fields and tables.
Please share the documents : [email protected]
Thank you,
GSP
Thank you,
GSR

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

HT201177 Only get Apple logo and system busy clock logo at startup. Mac won't boot up

Mac won't boot up. I only get the Apple logo and the "system busy" clock when I turn on my computer. Tried unplugging and restarting but to no avail.

Go to > Mac OS X: Gray screen appears during startup and work thru all the setps in that article.

Photoshop Element 13 download fails : system busy

Hi !
I don't succeed in downloading Photoshop Elements 13.0 MAC ESD LRF from LWS. I tried several times and I always got an error message "Echec - Système occupé" (in French, which means "Failure - System busy"). In the target folder I find a file "Non confirmé 425527.crdownload" which contains 1,82 GB. So the file seems to be complete or almost complete.
My laptop is running with Windows 7 and it's not busy with other heavy tasks during download. There is plenty of space on the drive.
Thank you for your help.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Bt email system busy

Hi,
When i try to log into my BT Mail. I am only getting a message saying system busy.
This has happened everytime i have tried this evening.
Is there a fault with bt mail tonight?
Thanks

same for me, yesterday too. When you do get in you get logged out again and again. TennisJ

FI Archiving - System error: Customer/vendor line item not on OI basis

While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
Regards,
Shailesh

Hi Adisha,
This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
Either you wait for the next invoice with big amount but which seems bit impractical..
In this we really need to consult the Accounting Standards to see what it could allow.
Regards,
Chintan Joshi

I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

Question
I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can flash player app be run and controlled in a system with only command line?

I want to test my. flash app in a remote linux pc. I am not permitted to install desktop environment in that remote pc.
So I am wondering if I can use flashplayer_10_sa_debug to run my app in a system with only command line access.
And further, can I use some command option to interact with my app for doing something?
If not , how can I reach my goal? Can you give me some advices?

Hi,
Can we get a status update for this? This seems to have broken Mac Projector files when published from a PC. Our old CD-ROM presentations no longer work. They throw the same error.
Is there a bug ticket that we can follow? Any sort of timeline? I need to give an answer to my client on when this will be fixed. Telling them to disable Gatekeeper isn't really a great solution.

I have received spam calls on my Skype line a few ...

I have received spam calls on my Skype line a few times now. Something about my computer speed. A warning that if I did not act now, bad things will happen, or something like that.
Has anyone else tried to report this to Skype?

Hi there Flameman88,
It sounds like the iSight camera on your iMac isn't working properly. I would recommend taking at the troubleshooting steps in the article below.
How to Troubleshoot iSight - Apple Support
-Griff W.

Logical System,Business System

Hi Gurus,
What is Logical System? n What is Business System?
Wt is the Difference betweent these two?Can you explain me in detial.
thanks in advacne.

Hi Kumar
Logical System
System in which applications sharing a common data basis run. In SAP terms, a logical system is a client in a database. Messages are exchanged between logical systems.
Systems of the Central User Administration (CUA) are referred to using logical system IDs. In the SAP sense, a logical system is a client. Therefore you must first set up logical system names that you then assign to the clients in the SAP systems.
It is possible that the logical system name already exists because you have already included the system in an ALE distribution. You can then ignore the procedures Define/Set Up Logical System and Assign Logical System to a Client.
Business systems are logical systems that function as senders or receivers within the SAP Exchange Infrastructure. You configure business systems in the SAP System Landscape Directory (SLD). A business system is always associated with a technical system (here: SAP Web AS ABAP system).
Configuring an SAP Business System
http://help.sap.com/saphelp_nw04/helpdata/en/87/7277e8fba34421a45d97a41ec27381/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/5aa2a0deb91548a1842f8485dee4a2/frameset.htm
Defining/Setting Up a Logical System
http://help.sap.com/saphelp_nw04/helpdata/en/aa/b4b13b00ae793be10000000a11402f/content.htm
Assigning a Logical System to a Client
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b4b13b00ae793be10000000a11402f/content.htm
regards
sandeep
ih helpful kindly reward points

InfoPackages Missing in Project Systems Business Content

Hi all,
Just installed PS business content in a BW 3.5 system. Cubes, ODS's, etc are all OK. But should there be InfoPackages supplied?
Thanks!
Gerry.

Gerry
Welcome To SDN
Usually we will create our own info Packages based on our requirements like what cubes or ODS it should load also it is Delta/init/full. All these settings could be done in our info Packages based on our requirements.
Hope this helps
Thnaks
sat

DualPhone: "system busy" or "Skype-line is busy" e...

Similar Messages

Maybe you are looking for