Dubai payroll-rounding off the net pay

Hi All,
Can anyone let me know how the net pay gets rounded off in Dubai Payroll.We do not have allowance grouping and /ROR IN DUBAI PAYROLL.

There is no any specific Standrad rule for rounding of Net pay , But in case if there is any custom rule you can check the same in the Pay Roll Log

Similar Messages

Is there a way to CAPTURE audio/video off the net then run it m.m. prsntn

I'm fairly new to the mac genre. In windows we had apps like Camtasia to
capture audio/video off the net. I was hoping something like that would
be avail for the mac and then once capture it how would I edit it and
include it in a presentation software; for example, keynote?
Is there added hardware req'd (?Capture board)? what would be a good software mac
compatible?

I'd like to capture audio and video for example sometimes just need to capture the
audio if some instruction is coming say over a quicktime or media player for my work.
Then sometimes I need to capture the audio and video when they ware actually showing me
charts and explaining them things like that.
is snap Z the way to go then for quality and fair pricing to get good results.
Do we have any resident applications already on the ilife variety that could be utilized for
something like this or is the only way to go through a 3rd party vendor?

Getting old site off the 'net without appropriate files. (to start over with same domain name)

As a complete novice, I'm not even sure how to start this question...but, I have tried everything and I think I have "lost" my website in terms of bringing in back into DW and changing/updating it. My backup files on my computer have disappeared and the appropriate files through my cPanel to bring it back to in order make changes aren't there. The website still functions, but it is outdated for my business needs.
So, at this point, my question is this; how can I gain control over the domain and start over from scratch. I don't want what is out there anymore, but without control through the above mentioned devices, is it even possible to build a new website and get the old one off the 'net as it is and still keep the original www.name.com?
I'm clueless at this point. Thanks.

Chazmonk wrote:
So, at this point, I don't know what is really going on. My main goal was to get my existing website off the net and put something updated on with the same domain name. I was successful with what JTANNA suggested, but I don't know what I'm doing with a mirrored site in terms of what my needs are. I am not against changing the domain name and just leaving this one out there, though I did put a great deal of time into building it. I would take some further help if anyone has more suggestions, but I'm about ready to move one.
Thanks for trying to help.
You will need to sort out the FTP issues because when you have edited your site, you will need to upload it and so FTP details will be required.
Your first port-of-call to sort this out is to contact your host who can reset the password for you so that you can start all over again. The alternative, is to give your password/login details to Murray (PRIVATELY) so that he can try from his machine. When this is done, you can always change the password for your own security.
hth

The Net Pay generated by the system is wrong

Hii ,
i have an issue for payslip.
The Net Pay generated by the system for an employee for the month of Oct.09 is wrong. When i analyse the payslip, the difference between the Gross Earnings and the Deductions is different from the actual Net pay.
Please help , i have checked in form . In earnings column total is calculated correctly and deductions also but there is excess amount in net pay.

Hi ,
i have checked cluster for the same but net payment /560 is calculating wrong amount which is on payslip
as per understanding /560 = /550 + /110 so i have calcualted that amount bt it is giving some other amount
where shoud i check the processing of the /560 in detailslike which all other wagetypes are included in this
thanks for the reply

Regarding round off the value in adf table

HI All,
My Requirement:
i have to round off the value after decimal in adf column before saving to data base.
Excample : 1234.67 = 1235
34567.89=34568
34567.34= 34567
i am using jdeveloper 11.1.1.3.0
Please can you give code using converter or any other strategy.
Thanks & Regards,
Madhu

1. First of all you asked for rounding off, taking the integer part is not rounding off.
2. As per the documentation
integerOnly boolean Yes Flag specifying whether only the integer part of the value will be formatted and parsed. Default value is false.if i can understand correctly pertains to formatting only.
3. You can create a custom faces converter and add it to faces config.xml http://docs.oracle.com/javaee/1.4/tutorial/doc/JSFDevelop4.html . So that you do not have to write it in code.
4. If only integer is to be allowed why don't you change the data type to long or int instead of number

After emptying the cache I am knocked off the net...

Hello, After emptying my cache I am knocke off the net and have to reconfigure my connection anyone there?

Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue. Have you restarted your computer? Where did you empty your cache from - browser, system directory, Home directory?

I downloaded iWork off the net and need to transfer it to my MacBook air. How do I do this?

I downloaded iWork off the net and need to transfer it to my MacBook air. How do I do this?

How did you download iWork off the internet? Was it from the app store or somewhere else? What device did you download it to? If an iDevice, such as iPad, it is not the same version as used by Mac OS X devices such as your MacBook. If that is the case, you need to purchase the Mac OS X version.
If you downloaded the Mac OS X version to one machine and want it on your MB now, go to the Mac app store and click on purchases and download to the MB.

Rounding off Issue (Net Value not equal to Net Price * quantity)

Dear Gurus,
Here is an interesting issue.The default calculation done in the pricing procedure is two decimal places.Now we consider a real scneario,consider the net value of 324 quantities of an item calculated is 36,049.86 .When it is divided by quantity the resulting value of net price is 111.265 but the system shows 111.27 by rounding it off.
Now here comes the problem,my client needs the rate to be shown on the order script to be two decimal places and the net value should be equal quantity * net price.So if we apply this,
324 * 111.27 = 36051.48
But the net value calculated by the system is 36,049.86.So it can be consluded that:
"Quantity * Net Price Shown is not Equal to Net Value calculated by the System"
Need an urgent resolution,project is stuck on this
Regards,
Sam Ahmed
Edited by: Lakshmipathi on Nov 3, 2011 12:14 PM
Please dont add URGENT in subject or in your post

Here is the pricing procedure,
We start with the amount condition types
                                        Unit Price        Units Condition Value
ZMRP     MRP                     1,700.00           10     PAC     55,080.00
ZTRP     Trade Price     1,445.00           10     PAC     46,818.00
ZDPR     Dist. Price     1,445.00           10     PAC     46,818.00         (GL)
Using Trade Price we apply the product discount of 23%
ZPRD     Product Discount     23.000-     %                    10,768.14-
Then we send discount amount to the gl by using condition type ZDIS
ZDIS      Discount Value     100.000-     %           10,768.14-      (GL)
tHE RESULTING NET VALUE IS 36,049.86      as 46818.00 - 10,768.14
     Order Item value     111.27      1     PAC     36,049.86
And the Net Price is 111.27

Problem in Routine after rounding off the condition value

Dear all,
      I have attached the routine for rounding off value for condition value for T.Code va02. Routine is working fine but the problem is after the execution of routine it goes in some standard program LV61AA55 where again the rounded value gets changed . Maximum points will be allocated ..
Thanks anr Regards

FORM FRM_KONDI_WERT_925.
*{   INSERT         D01K911062                                        2
data : wa_xkomv like xkomv,
        v_kwert like xkomv-kwert,
       W_INDEX TYPE SY-TABIX.
read table xkomv into wa_xkomv with key kschl = 'JIN6'.
W_INDEX = SY-TABIX.
v_kwert = 1 * wa_xkomv-kwert / 100.
V_KWERT = WA_XKOMV-KWERT.
read table xkomv with key kschl = 'JHSC'.
CALL FUNCTION 'J_1I6_ROUND_TO_NEAREST_AMT'
   EXPORTING
     I_AMOUNT                 = v_kwert
   I_AMOUNT1                =
   I_AMOUNT2                =
   I_AMOUNT3                =
   I_AMOUNT4                =
   I_AMOUNT5                =
   I_EXADDTAX1_AMOUNT       =
   I_EXADDTAX2_AMOUNT       =
   I_EXADDTAX3_AMOUNT       =
IMPORTING
    E_AMOUNT                 = v_kwert
   E_AMOUNT1                =
   E_AMOUNT2                =
   E_AMOUNT3                =
   E_AMOUNT4                =
   E_AMOUNT5                =
   E_EXADDTAX1_AMOUNT       =
   E_EXADDTAX2_AMOUNT       =
   E_EXADDTAX3_AMOUNT       =
xkomv-kwert = v_kwert.
xkwert = v_kwert.
modify xkomv INDEX W_INDEX transporting kwert.
*}   INSERT
ENDFORM.

Rounding off the TR quantity

Hi,
We have this scenario:
When a production order is created, 79 kg of material A is needed. In the transfer requirement generated during WM staging, the quantity automatically specified is also 79 kg. We would like this to be rounded up to 100 kg, as the material needs to be issued by multiples of 100 only.
What settings should we have in order to address this? Currently, the stock removal strategy of the source storage type is H (shelf life expiration date). Storage unit management is not active for this storage type. Can we implement rounding off without SUM and using the current strategy?
Thanks.
Regards,
Joy

Hello,
The answer above seems good approach.
You could also try to have your own routine, for that you may try make use of user exit MWMTO006.
To determine the best pick (bin and quantity) after each individual pick was confirmed by the system (Function EXIT_SAPLL03A_007).
Best Regards,
Christian Rosa

I can only text through ordinary message when not connected to the internet to someone, but when I am connected, it is automatically assumed as iMessage. How will I text ordinarily without turning off the net? Thank you!

I am from the Philippines btw. What I meant is, I cannot text someone ordinarily when the net is turned on, and it assumes to be texting through iMessage. How will I text someone without turning off the internet in an ordinary way, not in iMessage? Thank you.

I Tried that already, but if i turned it off, I cannot send an imessage to people I want to text through imessage. There are people in my contacts that when I text, it is automatically as text message, while there are some that when I text, it is through iMessage automatically, and I just want through text message also. And for the latter, I still need to turn off the wifi in my phone for them to be texted through iMessage, which is more hassle.

Why can't I save an image off the net into the folder of my choice?

I've used a PC all my life until two days ago when I bought my MacBook. I absolutely love it, but there are a few PC/Mac differences bugging me, and one of them is what I'm asking you all about:
When I save an image off the internet and the pop-up asks me where to save it, it suggests only a few folders for me and I can't choose the folder I actually want to save the image in. Is there any way to change this? No one else seems to have asked about this on here before, but I hope someone can help me out.

Ah, it's so simple! Thank you.

AS to round off the shade % of graphic in Illustrator.

Hi Guys,
I am using MacIntosh X, Adobe Illustrator CS6 (version 16) and Applescript Editor (version 2.5).
I have more than 200 files with Bar charts and Pie charts. Every Time I have to convert the color mode to GrayScale through Menu Bar. (Edit > Edit colors > Convert to GrayScale). After doing that I have to select each and every bar of the chart with Direct selection tool and to round of the Shade Percentage.
For example
70.40% to 70% (the value after the dot is below 50)
70.60 to 71% (the value after the dot is above 50)
Is there a way, to do this using applescript?
It will saves me a day.
Thanks in advance.
Josh

I cant see a simple way of doing this while keeping the graph as a graph.
I could be wrong in this...
it could be done by ungrouping each graph so we can cycle each component and fix its fill.
but this would break the graph's edit-ability.

Videos off the Net

I recently got a new iPod Video. I would like to take little clips that I find on the net and are saved on my computer and put them on it. I am able to get the files onto my desktop, but when I go to import them into my Library, it says that the file isnt properly exported. How do you actually export a file? I have this problem with ripped DVD files as well.
Thanks!

Welcome to Apple Discussions!
Play the videos on your computer. What program do they play in?
btabz

Rounding off the decimal place.

how to round off to 2 decimal place for this following programs:
double x;
x = 5.0/3.0;
System.out.println(x);
answer for x is 1.6666666666666
my desired output is 1.67

import java.text.*;
public class Foo {
    public static void main(String[] args) {
        double x;
        x = 5.0 / 3.0;
        DecimalFormat df = new DecimalFormat("0.##");
        System.out.println(df.format(x));
}

Dubai payroll-rounding off the net pay

Similar Messages

Maybe you are looking for