Dubbing Audio with ASUS P6T WS Pro motherboard ADI AD2000B Audio CODEC

I am trying to dub audio commentary into my clips using the SoundMAX program settings provided with the ASUS ADI AD2000B Audio Codec. I have confirmed a microphone signal appears in SoundMAX and that PPro Audio Hardware Settings/Enable Devices has a check mark against 'Microphone(SoundMAX Integrated'. The other unchecked device shown is 'Line In (SoundMAX Intergrated Di'. When I set up the Audio Mixer with a mono Audio 4 channel, click the Audio 4 microphone icon to turn it on, turn off all other audio channels, click the record button, then speak into the microphone, no signal appears. Unfortunately, I have not been able to confirm that I am providing ASIO audio to PPro. I need to know if I am wasting my time trying to dub audio with the present setup or I am missing something. If no ASIO is possible using the present setup, what audio card do you recommend?

When you have your Mic input enabled in ASIO hardware setup, then in the audio mixer ou need to arm tracks with mic inputs then, then press the record button the input should be seen at this point. But to record you voice over onto time line you need to play the timeline. So that the targeted Audio Track will be recorded onto timeline. And after you stop playback you will se recorded audio.
Good luck.
reed some info here http://forums.adobe.com/message/2945122
and here http://help.adobe.com/en_US/PremierePro/4.0/WSE6275E94-29A7-4fa0-A52B-300A6EB2FB06a.html

Similar Messages

[SOLVED] Trouble installing with ASUS P8B75-M (UEFI) motherboard

I recently built a computer, which has an ASUSTek P8B75-M motherboard, and I can't seem to get past "triggering uevents" on the USB installation disk. After reading up, I'm pretty sure it's a Secure Boot issue, but I can't seem to figure out how exactly I should get it to boot, since nothing I've tried seems to work.
As it is now, here is what I have set for my options:
Secure Boot State: Enabled
Platform Key (PK) state: Loaded
OS Type: Windows UEFI mode (setting it to Other OS doesn't seem to make a difference)
Under the CSM (Compatibility Support Module)
Launch CSM: Enabled
Boot Device Control: UEFI and Legacy OpROM, OpROM Only, UEFI only
Boot from Network Devices: Legacy OpROM first, UEFI driver first, Ignore
Boot from Storage Devices: Both; Legacy OPROM first, Both; UEFI first, Legacy OpROM first, UEFI driver first, Ignore
Boot from PCIe/PCI Expansion Devices: Legacy OpROM first, UEFI driver first
and of course I have Fast Boot Disabled
not sure if it will help, but I also have:
Interrupt 19 Capture: Disabled
POST Delay Time: 3 sec
Option ROM Messages: Force BIOS
Any ideas? I'd go with other threads, but this seems to be organized rather strangely.
also, I'm using Windows 7, not 8.
Last edited by rodaz143 (2014-02-27 22:24:33)

Never mind, I got it working. Note to self, don't use dd for creating bootable USBs

How to play 5.1 audio with my Mac Book Pro Retina?

I recently received several DVD's that have 6 channel LPCM 24/192 and 24/96 sound. I have tried many alternatives but to no success. I will appreciate any suggestions... Sincerely, Joe Ray Skrha [email protected]

How are you ripping the video and audio from the DVD? You can't import stuff from a video DVD into an NLE without converting it to a workable format. If you use something that will give you ProRes files, and the audio is surround sound, FCPX will edit surround sound natively. As for playing it back in surround sound, you'd need a USB interface that connects to a surround sound system.

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Another strange RAID 0 SSD query with Asus P9X79 Pro - RAID array appearing in AHCI mode

Hi all, I found this thread:
http://forums.adobe.com/message/4874435
very helpful, as it describes a similar situation to my case (same motherboard). Here is my situation:
historically, this was my setup (all on Asus P9X79 Pro motherboard):
2 x 120Gb Intel 320 SSDs. Operating system on one of them, Lightroom catalogue and photoshop scratch disk on the other.
1 x 2TB WD SATA 3 HDD. All images and other data etc
1 x blu-ray DVD burner
As I am now needing video editing, I have just bought Premiere Pro. My OS SSD was also getting quite full. So, I took the plunge and bought a Samsung 830series 256GB SSD.
My plan was this:
(a) make the Samsung the new OS drive, so lots of spare space for the SSD to play with (plugged into one of the 6 GB/s ports)
(b) make a RAID 0 of the two Intel SSDs (i.e. 240GB volume) to act as Lightroom catalogue, PS scratch disk and Premiere Pro media cache, previews etc etc. This would be on 2 of the 3GB/s ports
(c) keep the 2TB WD HDD for data. (plugged into the other 6 GB/s port)
(d) plug the Blu-Ray drive into another of the 3 GB/s ports
However, I was having a nightmare reinstalling the OS from scratch, so I ended up using Norton Ghost to port the OS across from the Intel SSD to the Samsung SSD. I didn't have a lot of faith that it would work, but it did.... eventually. I have checked SSD alignment and it is correct, and I benchmarked the Samsung and it is flying - it is running to reported values according to AS Benchmark. So, I think that one is working fine - great stuff.
However, this left me with the two Intel 120GB SSDs to try to make into a RAID 0. Apart from the fact that my OS was already installed (and so no F6 driver install), I followed the instructions/suggestions of frogo369 in the forum thread I linked to above. I changed the SATA mode to RAID in the UEFI and then defined the RAID in the CTRL+I Intel RST option ROM utility. I then rebooted the PC.... oh dear.....
The PC started and got as far as the swirling Welcome to Windows sign (i.e. before log on appears), but then came the Blue Screen Of Death - and it gets into a never-ending reboot cycle. :-(
So, I figured that this was because I had changed my SATA mode in the UEFI from AHCI to RAID, but the OS was obviously from a time when I was only on AHCI. Therefore, I changed the SATA mode back to AHCI in UEFI. thankfully, the computer now boots successfully once more into Windows.
BUT, HERE'S THE BIT I DON'T UNDERSTAND..........
Weirdly (for me at least!), when I look at the list of disks in Disk Management, I could see the RAID. It was "unallocated", so I formatted it. It formatted fine. I then opened the Intel SSD toolbox, and it can see the RAID 0 (it even defines it as such). The only thing it won't let me do is really "interact" with it as it says I need Intel RST drivers of 11.0 or newer. But I don't think they are available for the X79 chipset - so no TRIM I think?? I've just benchmarked the RAID and it is doing good numbers - >500Mb/s read and 400Mb/s write if I remember correctly.
But anyway, my question really is two-fold:
(a)Firstly - how can I see this RAID/how is it working, if my BIOS is set to AHCI mode not RAID??
(b)am I likely to see a rapid detioration in the speed of the RAID, given that presumably TRIM won't be working on it?
Sorry for such a long explanation - and no doubt I've missed out huge bits of info you need anyway! But, any help, advice or direction would be very, very, gratefully received!
Tim

OK, an update to my post - I have now found Intel RST drivers for the X79 chipset - they are here, for the benefit of anyone in the future coming across this page:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21852&keyword=%22Intel+Rapi d+Storage+Technology%22&lang=eng
These have enabled me communicate with the RAID 0 array via the Intel SSD Toolbox. I have also confirmed that TRIM is activated on it.
However, this still hasn't answered my original question - i.e. how can I be using these two SSDs in RAID mode if RAID is not enabled in the UEFI? Don't get me wrong - I'm delighted(!!) - but any expertise as to how this is happening would be much appreciated!
Tim

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?
Thanks

Thanks, but are these are silent?
Why do they cost over 10 x what seems available for PC?
Is it not possible to flash the cards for mac?
Something similar to a ASUS Geforce 8400GS PCI-E 2.0 512 MB DDR2 Graphics Card EN8400GS Silent/P/512M?

How much real world difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much.

How much real world performance difference would there be between the 1600MHz memory of a 4,1 Mac Pro and the 800MHz memory of a 3,1 Mac Pro? My main app is multitrack audio with Pro Tools. Thanks so much. The CPU speed of either one would be between 2.8GHz and 3.0GHz.

What are the differences.... firmware and build, there were tweaks to the PCIe bus itself. As a result 3rd party cards and booting is better.
Support in 5,1 firmware for more 56xx and W35/36xx processors. Also memory timing.
The 4,1 was "64-bit boot mode optional" and 5,1 was default. I don't know if there are changes but I assume so, even if it is not reflected elsewhere or in version number.
I don't know what the prices are but 2009, to buy one today, when the 2010 is $1800.
The 2008 of course was test bed for 64-bit UEFI and it sure seems even Lion and then ML are not as well engineered - outside of Linc who would be the least likely to have a problem.
I would assume 2010 has better support for 8GB and even 16GB DIMMs as well as for 1333MHz.
Nehalem family had only come out in fall 2008 and a lot of work went into making improvements well past 2009.
If you remember, there were serious heat problems with those and 10.5.7+ up thru 10.6.2 even with iTunes, audio, and hyperthreading and cores hitting and staying in 80*C range. That I assume was both poor code (sleep does not mean poke and ask constantly) as well as changes in SMC and kernel improvements, to work around. Microcode can be patched in firmware, kernel, by drivers and by code, but it is best when the chips and core elements don't need to be.
If someone is stretched, and can get 2009 for $1200 it might be a fine fit. That year offered the OEM GT120 which isn't really as nice and matched for today both OS and apps that rely on a GPU. And for odd reasons two such 120's don't work well in Lion+ but that is probably minor. Having the 5770 is just "nicer" though.
There are some articles about trouble booting with PCIe SATA/SAS/SSD and less trouble with 2010. Also support for graphic card and audio I think was one of those "minor" 5770 related support issues. But shows some small changes were made there too.
I wish someone would come out and pre-announce DDR4 + SATA3 along with PCIe 3.x (for bandwidth and more power per rail) along with say Ivy Bridge-E socket processors was going to be this summer's 3 yr anniversary and to replace the 2010 designed motherboard. But that is what is on Intel's and others drawing boards simmeringn in the pot.

MSI GTX 680 Lightning compatibility with Windows 64/ Asus P6T Deluxe MB

I purchased a GTX 680 Lightning on Dec. 16. I've been having random PC lockups and Driver hangs/restarts. Here's what I have done so far to try and remedy the problem:
-started with MSI Afterburner version 2.2.5 BETA and Nvidia ( MSI provided ) drivers 301.42, and standard bios .
-upgraded to various newer versions of NVidia drivers, BETA and WHQL. Usually the newer drivers become even more unstable.
-Upgraded to Afterburner 2.3
-I had the original bios versions first shipped with the card, I have since updated the BIOS:
from 80.04.09.00.F7 --> 80.04.28.00.39
from 80.04.09.00.F8 --> 80.04.28.00.3A ( LN2 )
-NVidia control panel settings left at default, with Global/all profiles set to "prefer maximum performance".
-I originally had a GTX295 installed, so all drivers etc. were fully removed, followed by clean install of 301.40
-Afterburner 2.3.0 is installed, Core voltage is set to +12mv, and the power limit is set to 178%
-memtest run for hours on my memory, zero faults.
-furmark run for hours, no crashes
-3dmark run repeatedly with varying overclock settings in Afterburner, no crashes
The updated LN2 BIOS seems to be sllightly more stable, but I still see random crashes when running Windows media player, VLC Player, Internet Explorer. Its definately a problem between windows multimedia and the Nvidia drivers. I can play Skyrim maxxed out, for hours, yet when I first login to the computer and run IE, it sometimes locks up.
I've had the driver stop and recover while Afterburner is monitoring on-screen, and sometimes the CPU load will spike to 100% at the crash, yet sometimes it does not. GPU power voltage always sits at 0.987 or 1.212V. matching the power spec expected for the LN2 BIOS.
I've had GPU-Z cause at least 1 lockup, with the screen blanking red. Only 1.
My next step will be to try updated drivers again, now that the bios has been updated. I may also downgrade Afterburner to 2.2.5 BETA.
Does anyone have any other recommendations I can try? Can someone point me to the latest BIOS version for the card ( or can i try that hybrid BIOS now available? )
At what point do I give up and RMA the card?
Card S/N is 602-V283-02SB1206030939
Windows 7 Professional 64
Corsair 12GB mem, matched sticks
69 GB SSD for the OS, a Raptor 320GB disk for the rest
Antec True Power Quattro 1000W power supply
Asus P6T Deluxe MB ( not v2 )
Intel I7 cpu 2.93 Ghz

I'm going on 3 days of stable performance. I made 2 changes:
1) core voltage in MSI afterburner upped to +87mV, power limit at 150%.
2) I have an ASUS P6T Deluxe motherboard, and am running the UPU-6 engine. This utility is designed to let the motherboard auto-switch from max power savings -> medium power savings -> max performance ( 100% CPU ) -> turbo mode (O/C CPU ). I had this set on Auto, and I have re-set it manually to max-performance.
I think the EPU-6 engine was the problem, I am waiting for a few more days stability to prove the theory.
EUP-6 will lower your clock speed when idling, and then bump up your performance when you start doing things. In my case I would go from playing a game ( Skyrim) to running IE, and EPU-6 would change modes DOWN. In reverse, I would be doing nothing. then run IE or media player, and EPU-6 would change modes UP. Those state changes are where I think I was getting blackscreens and lockups.
I still don't understand it exactly, I think the combination of my MB changing power/performance AND the GTX680 also changing performce creates some kind of conflict. I have had the Afterburner graph going when the driver crashed, and it shows the GPU power maxing out when the driver crashed. All other graphs bottom out ie. the whole card "hiccups".
So I will put the core voltage back to defaults, and also set the Nvidia display/performance options all back to defaults, and keep the EPUJ-6 engine stuck on max-performance, which is basically leaving the MB running at 100% stock CPU and power. I expect that will prove stable and resolve the problem.
Crossing my fingers.

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

Audio Playback Issues in Premiere Pro 8.1.0 with AJA Kona 3

Hi,
I'm supporting a couple of edits running the latest version of Premiere Pro. The editors are experiencing some strange stuttering/glitching audio playback via the installed AJA Kona 3 cards, manifested as follows:
When scrubbing using keyboard arrow keys for any prolonged period of time, audio either begins to stutter or fails to playback (despite there being activity on the audio monitors within the software)
When playing audio with unrendered effects (nothing too challenging, unrendered titles etc.), the audio will occasionally not play at all or will begin to stutter also.
Specs are as follows:
HP z800 running Windows 7 64-bit
2 x Intel Xeon X5650 CPUs
32GB RAM
512GB Samsung SSD
nVidia Quadro 4000 (latest drivers installed)
AJA Kona 3 (latest drivers installed)
Wacom Intuos 4 tablet (latest drivers installed)
Storage is a SMB share connected via a dedicated 1Gb/s ethernet link (Intel PRO 1000 card) and media is largely DVCPRO HD 100 wrapped as OP1a MXF, with corresponding sequence settings.
I've played with various RAM and Playback settings (including setting the AJA video playback buffer to 'minimum' as suggested on another thread regarding audio playback), but the problems persist. Is there anything else I can try, or more information I can provide?

Since it worked with CS5.5, check with Blackmagic to see if they have updates for CS6
I know from other discussions that an nVidia driver update was needed for at least some people upgrading to CS6

I want to stream all audio to my stereo via AirPort. Right now audio only streams with iTunes, not when I'm online (YouTube, SoundCloud, Spotify). What must I do? Thanks! 2011 macbook pro 10.6.8

I want to stream all audio to my stereo via AirPort. Right now audio only streams with iTunes, not when I'm online (YouTube, SoundCloud, Spotify). What must I do? Thanks! 2011 macbook pro 10.6.8

Thanks, Bob. I've seen this suggested before. However, I'm at a friend's place (cat-sitting). He owns an older MacBook (almost positive) and he streams audio without Airfoil. All he uses is AirPort Express. He told me to simply click alt-option and the volume icon and a menu drops down, and I select "AirPort Express". But it never appears. All the menu offers is this:
"AirPort Express" isn't an option.
Why is that? Is there something fundamental I'm not doing?

Hi there, Is it possible to install ESXi 5.5 on a PC i5 3770K with windows 7, 64bits and motherboard asus Z77 ?

Is it possible to install ESXi 5.5 on a PC I5 3770K with windows 7, 64bits and motherboard asus Z77 ?

Hi(Bonjour)!
Here's the follow up:
I took a chance and installed MAC OS X 10.4.9 COMBO and QT 7.1.6 update, installed FCS 2 suite and my old TRV 340 still works perfectly.
I erased livetype included with FCE HD as suggested by apple tech note, and the installing process worked like a charm.
I keep my version of FCE HD 3.5.1 and original soundtrack . Both applications work well side by side with FCP 6.
Great.
Michel Boissonneault

Is anyone having problems with no audio with Bluetooth headphones while using Final Cut Pro X?

I cant hear any audio with my Blue tooth headphones only on Final Cut Pro X. Th headphones work fine on Itunes. The headphones I'm using are Motorola S305.

Please give the exact specifications of the clips you're editing from the inspector. Please give the exact project properties of the project you're editing in.

Help With Multimedia Audio Controller Driver For XP Pro

Hello,
Please help!!!
I am trying to locate the Multimedia Audio Controller Driver for XP Pro for an MSI 645 ULTRA (A6547MS) Motherboard. The audio device is integrated into the motherboard and Windows XP Pro is not recognizing the device.
I have tried looking at MSI Support Website but am unable to identify which is the correct driver package to use.
I would also like to know if there are any related WinXP Supplement driver package needed for this motherboard.

Did you do a clean installation of XP or you only use the upgrade function?
I recommend you to do clean installation if you didn't.

HT204347 is there an audio card that comes standard with the new Mac Pro?

Is there an audio card that comes standard with the new Mac Pro?

Hi cvs904,
If you are interested in more information about the built-in audio ports on the new Mac Pro, you may find the following article helpful:
Mac Pro (Late 2013): Audio ports
http://support.apple.com/kb/HT6024
Regards,
- Brenden

Dubbing Audio with ASUS P6T WS Pro motherboard ADI AD2000B Audio CODEC

Similar Messages

Maybe you are looking for