Duck Duck go Browser doesn't display search results, how to fix it?

The same search using other browsers displays the results. But i want to use Duck Duck Go

Did you already try safe mode or clear the recent history?
*[http://mzl.la/MwuO4X Firefox in safe mode]
*[http://mzl.la/NZyoI8 Clear recent history]
Also try reset Firefox
*[http://mzl.la/MnSTZB Reset Firefox]

Similar Messages

  • E61i internet browser doesn't display properly

    Hello,
    I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
    I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
    The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
    Does anybody have a clue?

    It sounds like a cache issue. When you view the page, that
    page is loaded into your (or your client's) browser's cache memory.
    This is done so that when you return to that page it will load
    faster (since it is already loaded into memory).
    This will only happen if a person has been to the page
    recently. There is a limit on the amount of information your
    browser will store in cache memory. The more you surf, the more
    likely it is that the page will be replaced in the cache memory
    with some other information.
    You (and your client) can, depending on what browser you are
    using, set your preferences so that all web pages will be
    completely reloaded every time you visit them. In IE 6 for Win:
    Tools>Internet Options>Settings> Select 'Every visit to
    the page'. You can also set your cache to be the minimum amount of
    space alotted. Note: This doesn't really work very well in IE 6 for
    WIN. I use firefox for reviewing changes because I have found IE 6
    is completely unreliable for viewing the latest.
    Most other browsers will allow you to hold down Shift and hit
    'refresh' to throw out the cache for that page and view the latest.
    As far as I know this is standard operating procedure for proofing
    new pages.
    If there is a coding technique to force a browser to use only
    the latest information, I don't know what it is.
    Good luck.

  • Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

    every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

    What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

  • My safari browser doesn't display as it normally should

    my safari browser doesn't display as it normally should with all the colors/animations/pictures.  I've tried the 32 bit mode, I've tried restarting safari, I've tried and even after the update in safari and the OS, it still looks like this.  What can I do to fix it?

    Hi adidas --
    Double check your Safari preferences.
    Make sure in "Appearance" that "Display images when the page opens" is checked.

  • Some browser doesn't display the MW page correctly

    after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
    The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
    The menu item is been streched out of the blue frame, they are no longer displayable
    any ideas?

    We have the same problem.
    And find it is caused by a combination of your screen resolution, font size and browser window size.
    The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
    After experiment with it, MW can display much better in our case.

  • Altavista will not display search results

    altavista us will not display search results. altavista canada works fine. On us site results will display in no style page but not in basic page style. The page comes up blank. This may have been caused by delta search. I think I have rid my computer of delta? Reloaded firefox. I use norton 360 and have run registry clean up and virus scans. Also cleaned explorer. In explorer the u.s. altavista works ok that is why I think it something to do with firefox and delta search showed up at the same time unwanted and forced a change on my home page. Have cleared computer of what delta files I could find my have something in the registry but I would not know what to look for or to do with. I am running xp

    In a round about way you solved my problem cor-el ! At the end of standard diagnostic there was mention of malware so I ran malwarebytes before running profile manager. malwarebytes found 21 items some in the registry. deleted these items and tried altavista us again and to my surprise it is working ok now.I thought norton 360 would catch such things but I guess it doesn't ! will keep and run a malware program from now on. thank you for your help.

  • How to display search results in a table or in different columns

    Hi
                 How can i display search results in multiple columns or in a table so that the user can sort the results based on a particular property displayed in the search results.
    Thanks in advance
    Regards,
    Vidya

    Hello,
    To display search results in a table, in different columns or more... you should modify SearchResultLayoutSet.
    Create your own StandardSearchResultRenderer (exp My_StandardSearchResultRenderer) and add to SearchResultLayoutSet. Than change whatever you like to achive your aim.
    Thank you.
    Hope this helps.

  • How to display search results in content area

    Hi
                 How can I display search results in the content area as seen in sdn.
    Thanks in advance.

    Hi,
    http://help.sap.com/saphelp_nw70/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm you find the relevant guidelines.
    You can filter the PCD object setting the Search Layout Set of your Searc Iview.
    In System Admin > System Configuration > Content Management > User Interface > Settings > Layout Set and duplicate the "SearchResultLayoutSet" layout set.
    Then you have to duplicate its Collection Renderer "StandardSearchResultRenderer".
    In its property "Resource Types to be Filtered" set as value "-http://sap.com/xmlns/pcd/app/iview".
    Then assign the new Collection Renderer to the new Layout Set and that's it!
    Now if yuor Search Iview uses this new Layout Set, when you search a PCD object the iviews will not be shown!
    (or)
    In the entry "Predefined Properties" of the search options set, you will need to enter "resourcetype(value=http://sap.com/xmlns/pcd/app/page/default)" if you want the search to be limited to resources defined as pages. Leave out /default if you dont want the end user to be able to change the filter.
    If you want the parameter reflected in the URL, you can find information about how to do it here: /message/280371#280371 [original link is broken]
    Check and try either ways.
    Regards,
    Ponneswari A.

  • Firefox wont display search results on certain engines (Google, yahoo). IE works fine and Bing also displays

    For the past 2 days, Firefox wont display search results on Google or Yahoo. Tried Bing it worked fine, tried Internet Explorer and it worked fine. All that gets displayed is a blank page, no errors or anything like that.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Upgraded 5s to IOS8, my iphone has showed no service to days, and I have restart and get the SIMcard regected. Also, I have refreshed my iphone system, but it still doesn't work. So, how to fix my iphone?

    Upgraded 5s to IOS8, my iphone has showed no service to days, and I have restart and get the SIMcard regected. Also, I have refreshed my iphone system, but it still doesn't work. So, how to fix my iphone?

    Hhave you done a reset press & hold power button & menu button until you see
    Apple Logo you will not lose any data.
    bsydd uk

  • Browser doesn't display the right web page

    Hey everyone,
    I have this problem with a web page that doesn't display
    right. What happen was my client has a news web page that is being
    updated once every week. The way I update it is changing the
    content on Dreamweaver and copy the codes and pasting them on the
    server interface, and resave them. Thus, over riding the old news
    page.
    Everything display right on my computer. The only thing is I
    have to refresh my browser in order for the right page to show up.
    Once it did, then it stays as that.
    The thing is, my client still sees the old news page even
    after I've replaced it with the new codes.
    I've done this for him for over 3 months, and this problem
    has never occur before.
    I don't understand why it's like this. If this is happening
    to him, wouldn't it be happening to other people's computer as
    well. If it is, then it's bad news, cause no one would like to
    always have to refresh their browser for the right news page to
    show.
    Could anyone explain why this is happening? And how would it
    affect other users? Or is this even possible.
    Thanks in advance, everyone.
    Jen

    It sounds like a cache issue. When you view the page, that
    page is loaded into your (or your client's) browser's cache memory.
    This is done so that when you return to that page it will load
    faster (since it is already loaded into memory).
    This will only happen if a person has been to the page
    recently. There is a limit on the amount of information your
    browser will store in cache memory. The more you surf, the more
    likely it is that the page will be replaced in the cache memory
    with some other information.
    You (and your client) can, depending on what browser you are
    using, set your preferences so that all web pages will be
    completely reloaded every time you visit them. In IE 6 for Win:
    Tools>Internet Options>Settings> Select 'Every visit to
    the page'. You can also set your cache to be the minimum amount of
    space alotted. Note: This doesn't really work very well in IE 6 for
    WIN. I use firefox for reviewing changes because I have found IE 6
    is completely unreliable for viewing the latest.
    Most other browsers will allow you to hold down Shift and hit
    'refresh' to throw out the cache for that page and view the latest.
    As far as I know this is standard operating procedure for proofing
    new pages.
    If there is a coding technique to force a browser to use only
    the latest information, I don't know what it is.
    Good luck.

  • WebHelp Search Doesn't Display Search Box on Chrome or IE With Chrome Frame

    I have RH10 (recently upgraded from RH9) and WebHelp projects are having issues displaying the Search box within the Search tab on Chrome as well as IE with Chrome Frame installed. Instead of getting a search box, I get what almost looks like an index of numbers with associated hyperlinks. The search box appears and behaves fine on other browsers such as Firefox, Safari and IE without Chrome Frame. I assume this is JavaScript related since all of my tests point in this direction, but no idea how to get it to behave. Attached is a screen shot of how it appears...Any suggestions?!?

    Any other suggestions? Not really but Item 10 in http://www.grainge.org/pages/authoring/rh10/using_rh10.htm covered how to fix another IE Frame issue. Maybe that would help put your developers on the track for a fix.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How do I display search results in a new window?

    Our current search feature (http://mainedreamvacation.businesscatalyst.com/business-search) displays the search results in the same page. When someone clicks to see the details page, the goes "back" the browser displays an alert asking the user if they want to re-submit the form.
    Is there a way for the search results to display in a new window? My hope is that by loading results into a new window, a user could click to see the detail, then return without the alert message.
    I'm open to simply suppressing the alert message, but I don't think that's possible.
    I should point out that this is NOT a site search. Also, I have tried  {module_webappsresults,,_blank} without success.
    Thanks!

    Hi Tim,
    The approach would be similar to customizing this for normal site search. 
    You'll need to locate the page where you inserted the web app search access the html and locate the pageID in the form action.  Use the same method found in the site search to apply the specific page.
    - http://helpx.adobe.com/business-catalyst/partner/add-search-form.html> Point to the results page
    **Ensure you please the {module_webappsresults} on the custom page to have the content display as well. 
    Kind regards,
    -Sidney

  • Store won't display search results, tabs dead

    Search results in iTunes Stoe (11) won't display all items (i.e. it reads "Total: 301 items" at the bottom of the list but only 16-20 will show up (depending on my luck). This is even true of, for example, a podcast show page itself. When I scroll down, there are empty lines where episode titles should go, but if I go all the way to the end, they suddenly disappear and the "Total: 301 items" jumps to the end of the 16-20 item long list.
    Categories within search results won't display either (i.e. I can see the "All," "Books," iTunes U" list on the right side, but clicking on each does nothing).
    Going from "Details" to "Ratings and Reviews" also requires clicking the tab and then reloading the page. My connection is fine, this has been happening for at least the last month at home, while out, using wifi and when drectly connected by old timey cables. Updated this morning, still no change.
    Help?

    This article has some tips
    http://support.apple.com/kb/ts1368
    (particularly under Troubleshooting on a Mac)
    If that does not help...  As a test, to narrow down the cause, you may want to create a new user account in System Preferences Users & Groups pane.  It can be Standard or Admin.  Log out and log in to the new user account (do not use Fast User Switching).
    Try running iTunes from the new user account, and accessing the iTunes Store. 
    If the problem does NOT occur in the new account, the cause is likely to be something in your primary user account.  For example, it could be user preferences settings, or something related to your iTunes library, or a background process that runs in your account that is interfering somehow. 
    If the same problem does occur in the new account, the cause is likely to be related to the overall OS, the iTunes application, or maybe network settings that block access to the iTunes Store.
    Either way, you'll be able better focus additional troubleshooting.

  • Problems getting files to open in browser from SP 2010 search results page

    We are in day 4 of having upgraded from MOSS 2007 to SharePoitn 2010 via database attach.
    When a user looks in their document library, and clicks on a PDF, they are asked if they want to check out and open or just open, and when they make the selection, acrobat reader opens the doc.
    When a user performs a search on the same library, and clicks on a PDF in the results page, the user is prompted if they wish to download the file, and then, after they save it, the file is downloaded and nothing else happens.
    The users do not want their disks filled with unnecessary copies of files.
    Note that I did add an "application/pdf" mime type to the allowedInlineDownloadedMimeTypes property .
    This is only occuring when using the download results page.
    Does anyone know a fix for this?
    Thank you.

    Hi lwvirden，
    Generally, if the PDF is added to the Web Application's AllowedInlineDownloadedMimeTypes property , the PDF files will open in browser when clicking them regardless of on the search result page or the document library.
    I recommend to delete the PDF from the Web Application's AllowedInlineDownloadedMimeTypes property and then re-add it to see if the issue still occurs.
    Here is a table summarizes the various PDF rendering behaviors in search and library in the link below(same for SharePoint 2010):
    http://stevemannspath.blogspot.in/2013/04/sharepoint-2013-pdf-support-and.html
    More reference:
    http://social.technet.microsoft.com/wiki/contents/articles/8073.sharepoint-browser-file-handling-deep-dive.aspx#DownloadFunctions
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for