Due to the rumored heat problems with the iPad 3, is there a danger in using a leather case design for it.

I recently purchased a 64 GB Verizon LTE iPad, along with a Bear Motion leather case designed specifically for that model. I've been reading a lot about the heat problems with the new iPad and although I haven't noticed them on mine, I'm worried that putting it in the case may cause worse problems. Is this something I should be concerned about?

Unless you have a defective iPad you should be fine. The only time it should be heating up is when you're running an intensive app like a game that's working the quad-core processor and the screen. I bought a Targus leather case for mine and play InfinityBlade2 on it and haven't noticed any heating issues with mine, but the part holding the iPad is plastic, so it can disipate heat better.
If your iPad gets too hot it'll warn you, so I'd use it for now and see what happens. It'll shut down before it causes any permanent damage.

Similar Messages

Can't get in the internet (no problems with explorer) it says untitled and when I click on abokkmark it says loadind for about one splitsecond and back to untitled

I cannot open any site with firefox, but have no problems with explorer. on the tabbar ontop it says untitled and when I click on ant bookmarsite or click on a link in an email from outlook, the untitled will change into loading (for only one split second) and right back to untitled.

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

Why won't Apple fix the wifi connectivity problem with the iMac and new OS instead of just havin us go through hours of useless mock fixes!

I have spent hours with apple care about this problem with wifi connectivity. According to all the posts I'm not alone. I love my new IMAC
but i'll be glad to go back to my PC just so I can get my email without all the headaches. It seems that Apple has lost interest in
the IMAC and all of the problems associated with the new OS.

Keep in mind that ASC is where people go to get help, so yes, you are seeing reports of people who are having WiFi connection issues. But while it might seem like there are lots of people having trouble, given the sheer number of iMacs in use, it is a very small number. Also keep in mind that WiFi isn't totally under Apple's control. There are dozens of WiFi routers. Even worse, the manufacturers of WiFi routers often release firmware upgrades to fix flaws without ever informing the consumer. And just to add to the confusion, while WiFi 801.2 n routers have been sold for several years, for most of that time there was no agreed upon standard!
So if you'd like help, first, what router do you have and have you checked the vendor site to see that it has the latest firmware?

TS2570 I have the gray screen problem with the white apple and spinning wheel

I have the gray screen problem when it boots to the white apple and spinning wheel, but when I tried safe booting and doing the fsck thing I think I only made it worse, because it now starts, the safe mode progress bar comes on, (no matter if I press any keys or not) and after a minute shuts down again by itself. I also tried the command option, p, r thing and that did not work either, only brought me to the gray screen with the white apple, spinning wheel, and bar, and it promptly shut down. I am thinking more and more that I need the disk, but im not sure I have it. is it possible to order a new one online or is there another thing I can try? there is not an apple store nearby, and ereasing my data is not an option.
Also Im not sure what my exact opporating system is, but I did buy and download mountainlion in August so It is pretty new

Welcome to the Apple Support Communities
The hard disk is damaged. Take the Mac to an Apple Store

Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

Go to My Computer, Uninstall Programs, and uninstall in this exact order :
      Itunes
      Apples Software Update
     Apple Mobile Device Support
     Bonjour (my system required a reboot on this one)
     Apple Application Support
Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes.
I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
Good luck to you and God Bless!
(Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one. I t tried restores and that didn't work for me either, but maybe it will work for you. Good luck and I hope you get it working soon..

Are sprint and apple trying to fix the 3g speed problem with the iphone 4s?

Ive had my 4s for about a month now, and i am about 50% happy with it. The internet speed is so slow when im not on wi-fi, and
in the evenings the picture mail service is so slow, since it runs on the 3g network. Ive sat back and waited to see if it gets better, but
doesn't look like it has. I haven't even seen where sprint nor apple have stated that there is a problem, and that really makes me mad.
Why did i pay $200 for an iphone that I cant even use to the full advatange people. Sprint and Apple really need to make a statement and
fix this problem, they are going to loose a lot of customers. Thanks.

We're all users here. We have no more access to information than you do.

I am Disgusted with the amount of problems with the Iphone.. is it worth it

I have been trying to fix my phone for the last 5 days now.. after hours and hours, foruming, reading the whole apple website (it feels like) there is still no solution to my problem. When i turn my phone on its a Picture of a USB cable pointing to itunes logo, and it doesn't do anything else.. not even a red slider bar or anything at all.
I have tried to restore on Mac and Windows, i have tried all version of itunes, re installed it all many of times, deleted all traces and re installed. Read all the error issues. Tried to restore in all Phone Modes with everything.
So what now apple?

If no change after any of the troubleshooting steps available to you, the iPhone includes a one year warranty. If you have a 3GS, it remains under warranty.
If you are in the U.S., you can call AppleCare, or make an appointment at an Apple store if there is one nearby.

I solve the Iphone 3Gs problem with the iOS 4

I solve the problem you just need to go to Settings -> General -> Date & Time then turn (set Automatically) off then go back to Settings -> Wallpaper then change the wallpaper to the first one on the top then turn the iphone off wait 2 mint then turn it one on
Message was edited by: @Iphoner

brendan002 do you have Iphone 3Gs did u upgrade to iOS 4 after the upgrade did u face any problems if your answer is No to all that mean it is not your problem if your answer was yes that mean you still dont anderstand the case.

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Since i upgraded my ipad to 7.0.2 there is a problem with the photo images are

can any one help my ipad photographs are now low quality with the a serious problem with the colours, this has all happened since i upgraded to 7.0.2

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Cannot print due to a problem with the current printer

Cannot print (anymore) due to a problem with the current printer is the message I get every time I try to print something out. I tried to reinstall the printer's software, I changed the cables, but nothing happened. It seems to be something related to the printer setup utility. Any big idea on how to solve this? I was printing without problems until this afternoon. I have a HP Laserjet 1022 and sometimes I use Adobe Acrobat Writer. None is currently working.
Thanks for any help.
Power Book G4 Mac OS X (10.3.9)

I just had the opererational system (10.3.9) reinstalled . Back to normality again.

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Due to the rumored heat problems with the iPad 3, is there a danger in using a leather case design for it.

Similar Messages

Maybe you are looking for