Duet Enterprise Installation Procedure

Hi Gurus,
I got requirement to install Duet Enterprise on ECC 6.0 dual stack system
I dont have idea on this, could you please any one has installaed it please tell me step by step procedure to install duet.
Thanks in Advance.
Venkat Raja

Hi Sravanthi,
Thanks for your response.
per my understanding i will follow this( correct meif am wrong)
1) install Sharepoint on another server
2)Install Duet on Dual stack ECC server.
here in this step how can i install duet on sap?
is it through .inst file or exe file or through any transactions?
becoz i saw duet installation document it is showing as somefiles to be executed that will start installation wizard.
in other online vedois it is showing with transactions in the SAP
so please guide me to install duet on sap?
what are things i need from sharepoint administartor?
Thanks in advance.
Venkat

Similar Messages

Duet Enterprise for cloud.

Hi All,
I want to know your views on the possibility of using Duet Enterprise for cloud based scenarios and specific comments on the following scenarios:
1. All systems viz. SharePoint, SCL and SAP backend are on cloud.
2. SharPoint and SCL are on cloud and the SAP backend in premise.
3. SharePoint is in cloud and SCL and SAP backend are on premise.
Cloud over hear means a public cloud. Please let me know what could be the complexities or road block sin each of these scenarios in your opinion.
Hoping for some constructive discussion on this topic, since these scenarios are catching a lot of eyes these says.
Regards,
Avishek.

Hi Avishek,
Update:
The november update of SharePoint Online (SPO) includes the earlier announced BCS support; see [Whatu2019s New in SharePoint Online: November 2011 Update|http://sharepoint.microsoft.com/blog/Pages/BlogPost.aspx?pID=1002&prod=SP&type=BL].
Via this it is now possible to connect to external data in SharePoint Online context; through WCF endpoints to the external repositories.
However, utilization of Duet Enterprise is not (yet) possible; due:
1) Duet Enterprise is an Add-On to both SharePoint and SAP installations; and this Add-On is not included within SharePoint Online.
2) Moreover; via Duet Enterprise you have a bi-directional connectivity between your SharePoint and your SAP landscape; it is required that both parties know how to 'reach' to another. This is something that I do not see forthcoming in any shared (multi-tenancy) cloud / SaaS proposition. It effectively requires to have a organization-dedicated Duet Enterprise configuration; which should be possible in the cloud, but then boils down to a multi-instance installation in which you outsource the hosting of YOUR SharePoint environment to a 'hosting organization'.
Note that SAP and Microsoft have included in the [Duet Enterprise Planned Roadmap|http://www.google.nl/url?sa=t&rct=j&q=cloud%20model%20duet%20enterprise&source=web&cd=2&ved=0CEkQFjAB&url=http%3A%2F%2Fwww.microsoft-sapphire.com%2Fresources%2FDuet%2520Enterprise%2520FP1.pptx&ei=45_pTun3F8GdOrr_mKAI&usg=AFQjCNH2ZjQQIxOSkBIlexBVQ2F1Fn1yVw] the following:
"Plan to support additional Mobile and Cloud scenarios" for a Next Version (following FP1)
As any roadmap, the value of this statement for now is limited; no guarantees given that it will actually be achieved.
Best regards, William.

Install or upgrade Gateway 2.0 for Duet Enterprise FP1

Hi,
We are checking the technical feasibility for upgrading to Duet Enterprise FP1 from Duet Enterprise 1.0 and followed the Guide from the learning maps for FP1 (Preparing the Environment for Duet Enterprise u2013 Feature Pack 1). However we are confused if we have to install Gateway 2.0 on the existing Duet NetWeaver 1.0 system or if there is an upgrade to Gateway available for existing Duet Enterprise 1.0 installations. Please clarify and validate the steps if you have completed the same successfully or are in expert in this area:
1. Install/Upgrade Gateway 2.0 on Duet Enterprise system (require clarification here)
2. Upgrade to IW_TNG 200 on the Duet Enterprise system
3. Import XI content in ESR
4. Complete set-up for FP1
Please clarify step 1 and comment on the sequence of the other steps.
Regards,
Avishek.

Hi Avishek,
The upgrade from Duet Enterprise 1.0 to Duet Enterprise FP1 is supported.
Your Duet Enterprise 1.0 system would have SWCs like IW_FND 100, IW_CNT 100 (This is collectively called as Gateway 0.5)and IW_TNG 100. Now the system can be upgraded to Gateway 2.0 and then upgrade IW_TNG from 100 to 200.
You can get more details about the upgrade from the "Upgrade Guide" in Service Market Place. You can access it from service.sap.com/instguides -> SAP Business Suite Application -> Duet Enterprise -> Feature Pack1 of Duet Enterprise 1.0 -> Upgrade Guide.
Thanks,
Girimurugan

Adding one more ECC to Duet Enterprise landscape

Hi Experts,
i have a Duet Enterprise landscape configured where i have one SCL system and one ECC system. As of now, Reporting and Workflow scenarios are configured on the ECC system.
Now i would like to add another ECC (say ECC_2) system into the landscape where i can work with Starter Services.
Please clarify following doubts regarding the same.
1. Can i add this ECC_2 using installation wizard using just "Connect to SAP system" step or do i need to run all the steps in the installation wizard?
2. While running this step, do i need to specify 1 in the textbox or 2 (which indicates number of SAP systems). If i specify 1 and go ahead with the ECC_2 details, will it over-write the configurations done earlier for ECC ??
3. Is it possible to change the source system for "Reporting" / "Workflow" after the installation ? (i mean later as per my preference)
~ Ramanath.

Hi,
yes, adding a second system is no problem. That is actually one of the great "features" of Duet Enterprise: you can easily connect multiple system and expose (even aggregated) data to SharePoint.
1. Can i add this ECC_2 using installation wizard using just "Connect to SAP system" step or do i need to run all the steps in the installation wizard?
Yes, you can do that. Just de-select all but the "Connect to SAP System". When executing this step, the required RFC destinations (both on the SCL and the backend system) will be created, as well as required trusts will be established (e.g. exchange PSE certificates for Web Service Trust / SAP Logon Ticket and Trusted System connections for RFC based communication)
2. While running this step, do i need to specify 1 in the textbox or 2 (which indicates number of SAP systems). If i specify 1 and go ahead with the ECC_2 details, will it over-write the configurations done earlier for ECC ??
Leave the 1 in the textbox. This is just a number of how many system you want to connect.
3. Is it possible to change the source system for "Reporting" / "Workflow" after the installation ? (i mean later as per my preference)
Yes, that is also possible. If you take a look at the IMG (SIMGH -> Service Consumption Layer Administration -> General Settings -> Manage Business Object Groups) that's where the "applications" are stored. These Business Object Groups represent the different applications that you see and use in SharePoint. So for example you see the Business Object Group "SPI_WORKFLOW" (if you used the default BC set configuration) which contains the Business Object "IW_WF_TASK".
Now if you take a look at the "Assign SAP System Aliases" (just select "SPI_WORKFLOW" and double click on "Assign SAP System Aliases") you can see to which server this Business Object Group / scenario is assigned. If the "User Role" is empty this means that all users on the SCL are assigned to this system. Via this table you could assign different roles to different backend system.
This "System Alias" is -- as the name says -- just an alias for the real RFC destination that points to your backend system. If you want to see what backend system this is, you have to go to SIMGH -> Service Consumption Layer Administration -> Connection Settings -> SCL to SAP System -> Manage SAP System Aliases here you can see which System Alias points to which RFC destination.
So in your case -- if you want to switch the backend systems -- you can either change the RFC destination that is assigned to a system alias here, or you create a new system alias (with the RFC destination that points to your new backend system) and assign this System alias to the Business Object Group.
I know it might sound confusing the first time you do it, but it all makes sense and is pretty logic if you get used to it.
Regards,
Holger.

Duet Enterprise 1.0 with CRM Sales Management

Hello,
we heard that Duet E 1.0 with sp2 with Business Packs releasing in June 2011.
1. Any idea when Duet Enterprise BP1 will release ?
2. is CRM Sales Management and Oppertunity Management is covered in this
3. before implimenting bp1 do we have to impliment duet enterprise 1.0 with sp2.
4. Can we directly integrate CRM and SharePoint 2010 with duet E.
Regards,
Shashank

Hi Shashank,
1. Any idea when Duet Enterprise BP1 will release ?
The plan is to release BP1 (or Feature Pack 1 as it is called) in Q3/Q4. The nomination for the Ramp-up has started. If you are interested you can apply via the [Online Scoping|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000715662&]. Enter your customer data and select "Feature Pack 1 for Duet Enterprise 1.0 " in the next step.
2. is CRM Sales Management and Oppertunity Management is covered in this
Feature Pack 1 will cover some contact-based scenarios of CRM.
3. before implimenting bp1 do we have to impliment duet enterprise 1.0 with sp2.
You can start with Duet Enterprise 1.0 SP02 right now and later update to Feature Pack 1 (by this you will already have done some mandatory steps like setting up the trust between the SharePoint and the SAP system already). If you do not want to start now, you can also wait for Feature Pack 1 and then start a fresh installation.
4. Can we directly integrate CRM and SharePoint 2010 with duet E.
There will not be a "full-out-of-the-box-scenario" for CRM integration in SharePoint. However, the focus is much more on providing building blocks that makes the integration of CRM simpler and faster.
Regards,
Holger.

Duet Enterprise

Hi Guys,
After doing research on SAP and SharePoint integration, I understand that the SAP exposes its SOAP services but still do not understand why Duet Enterprise Add on is required to share SAP data on SharePoint Portal.
What makes customers to go for Duet Enterprise ?
As we know we can expose the WebServices without the Duet Enterprise AddOn and SharePoint just needs a webservice to produce data.
Please help me in understanding why Duet Enterprise AddOn installation is required on SAP side.
Thanks & Regards,
Ravi Ganji

Sorry for late reply.
Thanks a lot.
Regards,
Ravi Ganji

Need installation procedure

Hi Friends,
Can any one give installation procedure for
SAP 4.7/ORACLE/NT
Thanks & Regards
Satish

Hi,
can you please check the following link.
http://service.sap.com/instguides
On the left hand panel of links, select SAP Components->SAP R/3 Enterprise
There you will have many options, select the 4.7 set which you are installing
eg. 1.SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
2. SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00
3. SAP R/3 Enterprise Core 4.70 / Ext. Set 1.10 (SR1)
etc...
after selecting the appropriate link you can find all installation / configuration documents on the right side of the web page.
you may download the required guide.
hope that helps,
regards,
Siddhesh

Can we use the ESR of XI 7.0 with the Microsoft SAP Duet Enterprise

Hi Experts,
I am working on the Microsoft and SAP product DUET enterprise and we are going to use ESR of XI netweaver for defining the web service structures.
In demo we have used it with PI 7.1 where we have the concept of Service Interface with multiple operations.
But we have PI 7.0 in the landscape which has Message Interface instead of service interface and doesnt have multiple operations.
My doubt is whether we can use the IR of PI 7.0 while working with DUET enterprise.
If Yes, please explain in detail.
If no, what are the varios options available?

Hi Disciple11,
As you said, Service Interface with multiple operations are supported from PI 7.1 onwards. Mostly SAP does not deliver enterprise services with multiple operaiotns as it would be impossible to import for customers those who are in lower versions like XI 3.0, 7.0 etc.
For DUET enterprise, you can create a back end operation proxy in service consumption layer either from a RFC or from a WSDL URL. Nevertheless I think it would not be possible to import the PI content with multiple operations for a serrive interface to PI 7.0 and below.
Thanks,
Sankar

Installation procedure for WRT54GC does not detect router on Windows Vista.

Today I bought a used WRT54GC, supposed to be in working condition. I ran the installation procedure on my Vista laptop, following the detailed steps to the letter, and all was going fine, until the detection routine. All the router's lights were blinking, and others solid, as per the instructions, but a few seconds later I got a message stating that ".. Setup was not able to find a Compact Linksys Wireless router on the network....etc".
I immediately went to reset the unit, inserting a pin and waiting until the power light blinked several times (about 30 seconds). This did not help. I also reset the DSL modem, just in case, to no avail.
I have contacted the vendor, and he users that the unit was fine.
The Linksys support page has several user's forums references to how to 'connect' using Windows Vista, but all assume the unit has already been installed and working, which I found frustrating, since I cannot install it!
Any help will be greatly appreciated.
Regards,
gherna1

The trick is not to use the installation disk, but connect the PC/laptop directly to the router (wired), let it assign the dynamic IP address (default action), and then use the router's interface to set it up. Its address is 192.168.1.1 (it may be different for other models or brands).
I was able to set it up this way and now I'm enjoying it. Thanks to all who offered their advice.
Regards,
gherna1.

SharePoint 2013 and SAP connectivity / SAP Gateway for Microsoft and Duet Enterprise 2.0

Hello,
we are investigating the connection possibilities of SharePoint 2013 with SAP.
The basic scenario in our cases involves the transfer of documents and/or metadata from SharePoint to SAP possibly through a Workflow in SharePoint.
From my research the most promising official (no 3d-party) interfaces that can be used are the Duet Enterprise 2.0 and the SAP Gateway for Microsoft.
From my understanding both interfaces allow only the consumption of Data from SAP to SharePoint and not vice versa. Moreover the interoperability of documents seems not be supported. Are CRUD operations from a SharePoint native lists to SAP supported?
Can someone please clarify this topics?
I have found lots of documentation concerning the interfaces but not a clear answer to this questions.
Many thanks in advance!
Ioannis

Hi Ioannis,
It seems that there is no built in method to get data from SharePoint list in SAP.
As a workaround, we can export SharePoint list to excel and then use that spread sheet as a source data in SAP.
http://scn.sap.com/thread/3467263
http://scn.sap.com/thread/3472110
As this issue is regarding to SAP, I recommend you to ask the question in the SAP:
http://scn.sap.com/welcome.
More experts will assist you, then you will get more information relation to SAP.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Problem in update operation for duet enterprise 1.0 from SharePoint end.

Hi Everyone, I have developed a sap netweaver duet enterprise 1.0 to send the data from sap to share point and from share point to sap. The problem is that I am able to test the data successfully from duet system in sap for all the operations Query, Read & Update and I am getting the required output.
But from share point end when they are hitting the data for Query, Read & Update operations the query and read operations are successful but the update operation is getting failed. I unable to trigger the break point for update operation. I have checked the log but in that i am getting BULK READ status.
Can anyone help me out in resolving this issue.
Thanks in advance
Regards
Srinu

Hi Binson,
I want to ristrict the crude operation (create, update etc) by giving roles in backend system. i am able to apply restriction at sharepoint end but i don't want that. i want SAP role based security.
So i want, according to given roles in backend system user is able to do operations at sharepoint.
Thanks & Regards
Virender Solanki

DUET Enterprise vs BO BI Integration Option for Microsoft Sharepoint

I am struggling to find the right management overview to position DUET Enterprise vs BO BI Integration for Microsoft Sharepoint.
My high level definition of DUET Enterprise is to expose SAP Data and Processes into the Microsoft Sharepoint Environment (especially for non professional user = casual user).
Obviously these casual users need to see, to retrieve or to refresh some BW reports (knowing we are using or will use BO BI 4.0).
It seems DUET Enterprise does not support this scenario .... and we need to use another solution called : BO BI Integration Option for Sharepoint (detailed doc [here|http://help.sap.com/businessobject/product_guides/boexir4/en/400sp2_ioms_getstarted_en.pdf]).
I am confused (I can not picture it) why we need 2 different products (medium - long term).
Could you somebody explain :
1. to confirm we need currently these 2 products
2. why we will need 2 different products in the future ?
Thanks.

Hi Patrick,
I was also trying to find some information this topic for the last few days when I came across your thread. There has been a similar discussion earlier in [this SDN thread|Duet Enterprise vs BO Integration Option for Microsoft Sharepoint u2013 IOMS;.
After seeing the capabilities of IOMS, I can say these two products are very different. IOMS has different web parts to render BO/BW dashboards, reports ect. whereas Duet Enterprise is an integration platform for connecting various SAP systems (of type ABAP now), using which we can view/operate on any SAP object, integrate workflow and fetch SAP reports as document.
Duet Enterprise provides SSO and role based access to SAP data which seems to be missing in IOMS.
At this point it seems both these products have different capabilities with similarities in report publishing (Duet Enterprise can only publish reports from BI and other ABAP based system directly to SharePoint document library; not sure what IOMS does in this area).
I guess at this point if your requiremtn is to only provide a SharePoint based frontend to Bo/BI IOMS has to be used, however if you need to build applications with SAP data or around SAP processes Duet Enterprise has to be used.

SAP xRPM/PPM5.0 and Duet Enterprise

Hi Experts,
Is it possible to integrate Duet Enterprise into this landscape whereby SAP xRPM is our backend as we are upgrading to PPM 5.0 soon and Sharepoint 2010. Most of the examples that I've seen are using ECC 6.0 as backend however in this case we are using xRPM, as for the front end we uses SAP NW Portal.
Just trying to find out more on what are the possibilities of introducing Duet Enterprise into our landscape. Hope some of the experts here can provide more input in this.
Regards,
Jordi

Hi Jordi,
In general, you use pretty much any ABAP-based system as your backend system for Duet Enterprise (on Gateway). There are two ways to communicate between the backend system and Gateway:
- RFC: Here you can connect to backends all the way down to 4.6C
- Web Service: Here you need to check from which release on the web service you want to use is available
I am not an xRPM expert. Please feel free to come back with more specific questions for this scenario.
Cheers, Alex

Duet Enterprise - SAP Microsoft

Hi,
I need to give a demo for Duet Enterprise.
I am planning to give the leave application and cancelation approval process (workflow for couple of leave types).
Q 1) What all are the initial configuration /steps which I have to do from HCM point of view?
-     Hire employees /approvers
-     Configuration of leave types and quotas
-                    User ids created in SAP r/3 and IT0105 email
-                    My understanding is basic SAP workflow should be there for share point to access. Hope its correct.
-                    What esle to do??
Regards
Thomas
Edited by: Thomas Padiyara on May 25, 2011 10:39 AM

Hello Thomas,
Please find my inline reply to your questions.
+I need to give a demo for Duet Enterprise.+
For giving duet demo. First you have to install & configure Duet Enterprise in your Landscape. after that you have to configure wat you want to do in HR.
for out of box possiblity is below in Duet Enterprise
1. Workflow Approval
2.Reporting
3.Mysite
4.Profile Synchronization
5. Enterprise Collaboration
6. SAP intgration- Starter Services.
others you can customorize as you want to do.
I am planning to give the leave application and cancelation approval process (workflow for couple of leave types).
In out of box here only Leave approval/cancellation is possible.
For applying Leave you need to design custome development
Q 1) What all are the initial configuration /steps which I have to do from HCM point of view?
create two personal numbers with 1 reportee and 1 his approver.
maintain correct data in infotype 105 and maintain Leave Quota in Infotype 2006
Appy a Leave in R3 using PTARQ t code with Test Application Tab with reportee personal number
- What esle to do??
For Duet enterprise. Give access to Leave workflow Task in SharePoint. go to Transaction SE 38 and Run ABAP Report- RSWNSEL and OSP_FULL/OSP_DELTA you configured in ERP and then run ABAP Report- S_OSP_WF_ITEM_SELECTION.
Then check you will get Leave workflow approval Task in SharePoint. Login with approver employee id in SharePoint and approve the Leave .
Regards,
Shashank

Duet Enterprise 2.0 - Accessing SAP DMS Documents

Hi,
Is there any possibility to access the SAP DMS documents using Duet Enterprise 2.0 from SharePoint 2013?
If the answer is No, then what is the starter services in DE 1.0 and why the DMS functionality is included in that and not in DE 2.0, which will be the easy way to access SAP documents from the SharePoint. Is there any alternative?
Please clear my queries, i'm eager to know the reason behind it.
Thanks,
Kamal

Hi Kamal,
The DE 1.0 Starter Services models are available on the DE 2.0 Software package. To implement Starter Services for DE 2.0 you should follow all of the steps in the DE 1.0 FP1 documentation with the exception of importing on SharePoint. I have attached a document with the commands required to import the Starter Services to SharePoint.
Hope this helps.
Cheers,
Helen

Duet Enterprise Installation Procedure

Similar Messages

Maybe you are looking for