Dumb design flaw in text search

The text search is not case sensitive, and doesn't even have an option for it. To me this is a really dumb design flaw. Say you want to find the 10 out of 1,000 captions where you accidentally typed ORegon instead of Oregon so you can quickly fix them. Not possible.
And, since LR has no "details" or "list" view like that in the Windows or Mac OS, there's no way to visually scan the metadata for a set of files to find such anomalies. Thank God for ACDSee, which has a comprehensive "details" view, a basic feature of any database program that is sorely lacking in LR.

Here are a few
Female chacma baboon (Papio ursinus) from the Kanonkop troop eating fruits (Rhus lucida) in Smitswinkel Flats, Cape Peninsula, South Africa
Sparky, a juvenile female chacma baboon (Papio ursinus) from the Groot Olifantsbos (Scarborough) troop with a missing leg from being electrocuted, on a log on the beach at Olifantsbos, Cape Peninsula, South Africa
Road-killed small spotted genet (G. genetta), on the M4 near Simon's Town, Cape Peninsula, South Africa. This road has an absurdly high speed limit for an area that is home to several baboon troops as well as genets and other wildlife.
Eggs of the African Black Oystercatcher (Haematopus moquini), a red-listed endangered species with only 5,000 birds in the world, Gifkommetjie, Cape Peninsula, South Africa
Greater white-fronted goose (Anser albifrons) and canada goose (Branta canadensis) in flight, Lower Klamath NWR, CA
A purple berry (sp.) is contrasted by silt covering the plant on which it's growing, Tambopata River, Peruvian Amazon
The unusual tomato hornworm silkmoth caterpillar (Xylophanes germen), with its fake red tail and fake blue eyes, Monteverde Cloud Forest, Costa Rica
Two girls in colorful costumes browse the internet at a cafe in Cusco, Peru while holding a baby lamb. The girls dress in their traditonal Inca garb and pose for pictures to get money from tourists.

Similar Messages

  • Design Flaw in Twin Frozr fans

    So, I'm finally creating a thread about this.
    There's been reports over the last few years about fans making rattling noises, grinding noises, high pitched whines, whether on cold boot, idle, high RPM, or constantly, and quite frankly I'm tired of MSI ignoring the issue.
    There is a design flaw with the Twin Frozr fans.
    MSI needs to publicly acknowledge this.
    Currently, the only way to get a replacement fan is to send your ENTIRE card in for repair.  Other more reputable companies will send you out an entirely new fansink attachment at no cost.  As one poster said it; "That would be like sending my car to Nissan every time I blow a tire"
    My personal experience with Twin Frozr started with Twin Frozr 2 on my GTX 460 Hawks.  The Talon Attack edition started to make a bad grinding noise on cold boot or if it actually got cold enough during idle operation.  When the card warmed up, the noise stopped.  Speeding up the fan to 100% sometimes also caused it to get rid of the noise, but that was only temporary unless the card stayed warm.
    My non-hawk exhibited rattling as well, but to a lesser extent.  No grinding noise on cold boot, just a low rattling.
    My next card was a GTX 670 PE with Twin Frozr 4.  Surely they fixed the issue by now right?  Wrong!  Within 30 days I started having fan issues.  This fan doesn't rattle, but there is a high pitched whine when the fan is in operation.  The faster the RPM, the louder the whine.  Most people don't even know they have this issue because of the subtle tone of the whine and it being muffled by the fan's air sound at higher RPMs.
    That's 3 separate graphics cards all exhibiting an issue with their fans.
    There's one thing in common with these issues; it's only caused by the fan closest to the I/O.  This boggles my mind.  Surely if there was a problem with the fan design itself it would affect both fans, right?  I just don't understand it.  This leads me to believe it's a design flaw with the Twin Frozr design.
    Some people seem to have an issue with the other fan, but it appears to be rare and not the same type of problem the majority of people are reporting.
    Seeing as they want you to lose your card (and $10+ to ship it) for weeks at a time to 'fix' an issue which will no doubt happen again, something needs to be done about this.  Their 'warranty' policy for this issue is completely unacceptable, as is the fact that the fans start acting up within a month of ownership.
    If you want to see more threads, just do a search. Here is some of them:
    https://forum-en.msi.com/index.php?topic=151578.0
    https://forum-en.msi.com/index.php?topic=157567.0
    https://forum-en.msi.com/index.php?topic=156284.0
    https://forum-en.msi.com/index.php?topic=161914.0
    https://forum-en.msi.com/index.php?topic=153463.0
    https://forum-en.msi.com/index.php?topic=154030.0
    Googling brings more results.  I've posted about it in this thread, and others have mentioned it as well: http://www.overclock.net/t/1265574/msi-gtx-670-power-edition-twin-frozr-4-cooler/0_30

    Quote from: Noway77 on 28-May-14, 05:39:49
    I don't think we have a MSI office in Portugal, most brands don't.
    Some stores are not reliable they buy from EU retailers some even from Asia retailers and usually they don't give proper support. In Lisbon you have stores like Globaldata, Nanochip, Chiptek and AquaPC they are in business for years, have good customer support and have also good prices.
    I'm probably not going to buy any MSI product from now on , for obvious reasons.
    Trying to contact a support shoudn't be this hard from a client , at this point I assume anyone that's doesn't want to lose time will just give up.
    As a consumer I was forced to RUN and TRY to find msi support , MSI support mail doesn't event exist , since I made this thread it still hasn't been changed.
    I really liked MSI ( I still have my 875P MSI neo here with my p4 and the NX6800 working ) it's like saying goodbye to an old friend that has been by my side since P4 times.
    I'll buy msi products in US , or in another country maybe , but never MORE in portugal.
    This is not cause of the shops , I recommend everyone to buy in the shops listed !!
    In fact most of the portuguese shops tried to help me find msi support ( even though they weren't the stored that sold me the card ).
    I really don't want ppl to get this mixed up, the problem here is MSI not acknowledging a problem that is simple to fix, having a non-existant email on their webpage as support for over 4 months and the fact that as a consumer I was forced to jump trough loops to actually contact MSI itself !
    Every portuguese shop I contacted was super nice and really helpful pointing me to the new msi email
    And actually the fix ( hot needle fix forum post link ) came from a shop reply.
    US support was always super nice and helpful !
    I was forced to fix my fan with the help of users.
    If right now my MSI gpu is working is thanks to guru3d and hardwareoc and simillar forums ( thanks to everyone that posted Twin Frozn fixes , this may not mean much , but really .. thanks for helping me out ! )
    MSI didn't help or even try to help me , I had to go out of my way to get help , and I never did.
    I know some of those stores , they have great prices , but if I buy anything in portugal I'll buy other brands for obvious reasons. ( it was actually one of those shops that helped me pinpoint the "real" msi email )
    I am a customer , I should be treated as such , I was joked and pushed around emails , found emails that don't even exist , I was ignored and left looking at a card going dead.
    Maybe for some of you it's easy , you just buy another one .... and maybe that's the custommer MSI wants. But that's not me.
    Pointing me to places to buy MORE is almost insulting at this point. I wont buy more ... I would be stupid of I did.
    I just hope some other person that has MSI and is having this problem with Twin Frozn fans ( that msi refuses to acknowledge as THEIR problem !! ) can fix them themselves or take some info from my posts and others to at least understand what is happening.
    From my pov , the fan eventually has some sort of lubrication problem , and due to that it starts to wobble , after that the coils heat up to a point it wobbles even more.
    Due to the high temps the fan either "looses" enough to dump all the lubing out.
    At some point the fan will heat up so much the plastic IS REALLY hot to the touch and fells that it can be actually moldable ( so I assume this is really bad )
    This leads to the start-stop problem , the fan tries to kick itself on , but just makes things worse.
    This leads to a fan that fails in 2-3 years.
    MSI should either had a way to put oil in the fan OR just start to be ready to replace them.
    The fact that IS an ebay market for Twin Frzn fans is just flabbergasting .
    I wish I had a better view on this , but seriously looking at this thread,  and seeing all the steps I have done , to find there are others like me that have a failing fan and that the ones that aren't ignored like me have to RMA a card for a simple fan doesn't give me any sort of confidence in this brand.
    MSI has one of the best gpu coolers  , honestly it's so god that after all this mess I stand as a testimony for it being one of the BEST gpu coolers around ! All my MSI products so far have been great ... but this experience was just ... weird ..
    I wish MSI would contact the ppl that are in my position and help them , it's just a fan  , it's an easy fix and it's easy to replace.
    There are lots of ppl right now with fans starting to fail , just take their card , replace the fan and send them back , and MSI will have happy customers , HAPPY cause the brand CARED !
    I'm only 1 client , MSI hardly "fells" me leaving ... I really like MSI ... so I wish this won't ever happen again to no one !
    I have been ignored in mailing for TDR problems , after that about the 12h+ card artifacting being fixed with cold boot ( I assume this was an nvidia problem )
    After using certain drivers that didn't TDR my card ( I have enough PSU for it so ... it's not the PSU ) and having been 2 years finding my own "solutions" to problems ... being ignored and just struggling to get help from MSI for a stupid FAN a cheap part and being hard just to contact them to get no answer .... and getting help from other users while MSI ignores me ? ... I'm thinking on leaving the brand ...
    The fans are now working 100% , I'll post info when and if they fail ( if I see my "fix" stopped working ) .
    It has now been a long time since 2011 and my first reports , and its been almost 6 months since I contacted msi about the portuguese email listed not existing.
    The email is still there , that non-existent email is STILL listen in MSI website RIGHT NOW after me being emailing them about it for 4+ months ,as a customer,  I can only assume they either ignore people , or they have a terrible communications internally .
    Again after all this mess , I would be kinda stupid to support or try to buy another product from this brand , MSI support was always great and was the main reason I bought msi products, all this posts are from a person that was truly SHOCKED in everything that is happening and the feeling that no one cared.

  • Using Punctuations in Full Text Searches

    Hi, I'm having a bit of trouble implementing full text search effectively in regards to punctuations.
    In my thesaurus file I have something along the lines of
    <expansion>
    <sub>intl</sub>
    <sub>int'l</sub>
    <sub>international</sub>
    </expansion>
    and when I run the query 
    select * from sys.dm_fts_parser('Formsof(freetext,"international")',1033,null,0)
    it show's that it is included
    international's
    internationals
    internationals'
    international
    intl
    int'l
    However when I do end up running the query using Contains, it ignores everything that contains int'l and only returns the results of the other matches.

    I am moving it to Search.
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Intel finds Sandy Brigde chipset design flaw

    Hello!
    This is my first post at Apple forum, and my first post with new MBP 13''.
    I was searching for some news about new MacBook Pro (2011) and I found this:
    http://www.engadget.com/2011/01/31/intel-finds-sandy-bridge-chipset-design-flaw- shipments-stopped/
    I am a little worried because I bought the new model of macbook pro and I'm searching for some informations about it. I have checked the Intel website and I came across this situation
    http://www.intel.com/consumer/products/processors/chipset.htm
    Do I have this problem? And if so how can I contact someone to help me solve this?
    Should I be worried?
    Best regards,
    Renato Baptista

    You don't have this issue. Even if you did it wouldn't affect the laptops anyway as it only affects SATA ports 3 and upwards.
    From the second article:
    ====
    Q: What is the issue?
    A: Under normal operation, Intel® 6 Series Express Chipsets have an issue that may impact SATA ports 2-5. Contact your system manufacturer for more information.
    ====
    Your laptop only has 2 ports - 0 and 1.
    Message was edited by: MacRS4

  • Text Search Index

    Hi Gurus,
    In text search index is there any way to know which documents are indexed and which are not.
    thanks in advance
    saby

    Actually, I was thinking of using autonomous_transaction at the time in a proc that is called by the trigger as follows:
    CREATE OR REPLACE PROCEDURE z_sync_idx
    IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    BEGIN
    ctx_ddl.sync_index('Z_TEST_IDX');
    END;
    CREATE OR REPLACE TRIGGER z_test_trig
    AFTER INSERT OR UPDATE OR DELETE ON z_test
    FOR EACH ROW
    BEGIN
    z_sync_idx;
    END z_test_trig;
    My logic was flawed however. This does work for those items marked as pending on insert...the problem is the commit for the current insert hasn't happened yet, therefore, it is not marked as pending. Inserting into the table does kick off the triggger, but doesn't sync the current record as a result.
    Looks like we're back to the job...

  • SCOM 2012 SP1 Web Console not filtering "Items by Text Search"

    I have the weirdest issue with not one, but two installations of SCOM 2012 (SP1) specific to the Web-based Console.  I have to think that it's something that I've messed up since each installation (separate domains, separate environments) is exhibiting
    the exact same behavior and that I cannot find a single mention by anyone else experiencing this problem anywhere on the 'net.
    The problem I'm encountering is that when I try to filter the list of objects using the "Look for: Items by text Search" option, the list doesn't filter! It's just the *weirdest* thing!
    For example, I go into "Microsoft Windows Server; Performance" and select "Disk Capacity".  The view loads just fine with two panes up top, and the object list down below.  I select a pane to display the list of objects which
    gives me all the servers discovered/managed by SCOM.  I changed the "Look for:" drop-down from "All Items" to "Items by Text Search" which makes the text field (to the right) active.  I enter my text string and........ 
    nothing happens.  When I hit "Enter" the pane simply refreshes.  The "Reset" button doesn't become active further reinforcing the fact that something just ain't right.
    I have a installation of SCOM 2007 R2 and this feature works flawlessly.
    Anyone have any idea as to what I may have missed or what I might do to resolve this issue?  Again, I've found absolutely nothing on the Internet specific to this issue (unless my search criteria is woefully flawed) which suggests that I've messed something
    up.
    Thank you in advance for your time!
    -Todd
    PS - this feature works just fine in the installed/thick client/console.

    Unfortunately, I never did receive an answer to this issue/post, and I never found a solution with this version of SCOM.
    I did, however, just test this functionality on the SCOM 2012 R2 installation and discovered that the "Items by text search" filter in the web console *does* work as one would expect.  So, if you're able, upgrade to SCOM 2012 R2 and you should
    be much happier with the result.  (I think I'm running Cumulative Update #2, if that helps.)
    Hope this helps!
    -Todd

  • Identified a design flaw in the iPhone

    i was on the iPhone speakerphone with my parents and suddenly this mentally troubled girl i know sends me a message consisting of a single 3 letter expletive. i get the popup saying reply/cancel i press cancel.
    she sends it again - i cancel it again. and again and again on like 4th time i accidentally end the call with my parents.
    so i am trying to call them back but at this point she starts repeating the word every second or so so i am constantly getting the popup reply/cancel so i keep pressing cancel but before the screen cancels the new popup is there and the transparent glass popup takes the entire screen so i can't access the phone buttons to call my parents back.
    now my parents are calling me and i am trying to pick up the phone but the crazy girl is still firing away at about 40 messages per minute.
    long story short i was unable to either pick up on my parents or call them back until she stopped about 2 minutes later.
    it was VERY frustrating ! ! !
    this is unacceptable. i cannot lose control of my cell phone the second somebody starts texting me !
    the interface must be redesigned such that the reply/cancel popup doesn't block the rest of the screen. instead it should appear as a bar on top or bottom of the screen and the rest of the screen should compress a bit so u can still go about your business while the crazy people are having a breakdown.
    what if i was in a car using iphone as a GPS ? i might have gotten killed.
    serious serious flaw !

    Read between the lines, people. You're missing the point: the Text Message Popup Window interferes with normal operation of an application that is in use. IE: GPS mapping software....which is probably most useful while driving, no? The OP's point was that if he was trying to use some kind of GPS MAPPING while driving, the text message popups will get in the way of that use. The app still works, yes, but it's more, unnecessary buttons to push...
    I agree that at times the Text Popup can be problematic and a less intrusive alert window should be considered. I wouldn't call it a serious design flaw, though. It's just Apple not fully considering usability under certain conditions.

  • How can I use ONE Text search iView to event/affect mutliple Result Sets?

    hello everyone,
    i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
    i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID).  when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
    i don't want to have to build 6 different text search iViews (one for each table).  i just want to use ONE text search iView for all the different result set tables.  but, in the documentation and iView properties, the text search iView doesn't have any eventing.
    if you have any suggestions, please help.
    many thanks in advance,
    mm

    hello Donna,
    that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
    Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
    So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
    Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
    See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
    For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables.  Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
    -mm

  • Does anyone know how to do a text search in the new Safari for iPad iOS 7?

    Does anyone know how to do a text search in the new Safari for iPad iOS 7?

    The feature has been removed to make safari even less useable. You need to download a third party browser like atomic web browser to get the functionality you want back.
    Like many new IOS 7 "features", safari on the ipad is a FAIL.
    At least you can now bury safari in a folder containing hundreds of icons that you can only view 9 at a time.

  • Old contacts showing up in siri and text search results but not in contacts list.

    So what I did was this. I had mobile me, and iphone ocntacts as well as contacts on phone. After updating to IOS5, i had tripples of almost all my contacts (but not all). I converted my mobile me to icloud to discover i couldnt use that email under my new official icloud accoutn as my @me.com adress. So what i did was this. I deleted my old mobile me (now icloud account) compleatly from my phone, my iPad and my computer so there is no trace of it. I then went to my new iCloud account (that i will now use as my only icloud account. going to let the old mobile me one just die so i have 1 central spot for all my stuff).  Now all my contacts are gone. So to start fresh and just be done with the confusion, i go to www.icloud.com and manually (by hand) re type in all my contacts. I updated some info and changed some names (like nicknames and stuff like that to real names). Basiclly compleatly organizing my contacts and such to the way i want them. Getting rid of poeple i no longer talk to and such.  I did it, it syned and all was well. However now here is hte problem.
    If i go to spotlight search, or text search, or search with siri, or any type of search function, all of my old contacts are still there and viewable. All the ones i wanted to get rid of are all still there. However, if i go to contacts and look for thoes old contacts, they are not in the contact list (yes iv checked every "group" and also "all contacts" in groups).  What i want is to figure out how to get all of these old contacts compleatly deleated so they dont show up anywere on my phone. Especially with siri its making searches and auto calling more difficult because its finding two contacts sometimes that are the same person and asks me to distinguish instead of jsut calling.  CAn anybody help?
    Sorry for the wall of text, wanted to make sure to give as much info on the specifics as possible so hopefully i can get this resolved.  Is this a bug or something i did wrong? can i fix it or do i just have to wait for an update?
    P.S.
    Iv since upgraded to iphone 4S and still happening. Also this does NOT happen on my iPad. Only my iPhone.

    Talked to AppleCare for about an hour. After trying many steps: deleting contacts, re downloading from cloud, disabling Siri and re enabling, even Reset all Settings. Nothing worked. Ended up having to restore the phone via Erase All Content and Settings. That of course fixed it.
    Not sure what the issue was. I did have a Mobile Me account before the iCloud migration. For some reason, my contacts would appear in Contacts on the phone and in the cloud only once, but when using Siri it would list 2 or 3 duplicate contacts. Also after we deleted all the contacts on the phone, did an iPhone reset (Home and On/off buttons), my contacts list would show empty. Then I would click on Groups and poof all of a sudden duplicate or triplicate contacts would be in the contacts list.
    Very strange.

  • Full-Text search is not working with PDF files - SQL Server 2012 64 bit

    Hi,
    We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
    I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
    Server/DB Level Settings:
    1)
    Enable FileStream
    2)
    Install Full-Text
    then restart
    3)
    Use [specific db]
    alter
    database [db name]
    add
    filegroup Files
    contains filestream;
    alter
    database [db name]
    add
    file (
    name = N'Files',
    filename =
    N'D:\SQL\DATA') to
    filegroup [Files];
    3)
    Database level
    Settings:
    FileStream:
    FileStream
    Directory name:
    [Set the name]
    FileStream
    non-transacted
    Access: [set Appropriate]
    3a)
    Add a
    datafile to DB
    with filestreamdata
    filetype.
    4)
    Share D:\SQL\DATA
    directory and
    add specific accounts
    with read/write
    access
    5)
    Give bulkadmin
    access to those
    specific accounts
    at server
    level
    6)
    From the
    page (link)
    download and
    install the *.pdf
    IFilter for
    FTS. Link:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
    7)
    To the
    PATH global system
    variable add
    path to the
    catalog,
    where you installed
    the plugin.
    Default for
    this version is:
    C:\Program
    Files\Adobe\Adobe
    PDF iFilter 9
    for 64-bit
    platforms\bin
    8)
    From the
    page (link)
    download a
    FilterPackx64.exe
    and install
    it. Link:
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
    9)
    Now from
    SSMS execute the following
    procedures:
    -sp_fulltext_service
    'load_os_resources',1
    -sp_fulltext_service
    'verify_signature', 0
    EXEC
    sp_fulltext_service
    'update_languages';
    -- update language list
    EXEC
    sp_fulltext_service
    'restart_all_fdhosts';
    -- restart daemon
    reconfigure
    with override;
    10)
    Restart the
    server
    11)
    select document_type,
    path from
    sys.fulltext_document_types
    where document_type
    = '.pdf'
    -select
    document_type,
    path from sys.fulltext_document_types
    where document_type
    = '.docx'
    12) Results are OK.
    Following is my Table /Index/ catalog script:
    CREATE
    TABLE dbo.DocumentFilesTest
    DocumentId  INT
    IDENTITY(1,1)
    NOT NULL
    PRIMARY KEY,
    AddDate datetime
    NOT NULL,
    Name nvarchar(50)
    NOT NULL,
    Extension nvarchar(10)
    NOT NULL,
    Description nvarchar(1000)
    NULL,
    FileStream_Id UNIQUEIDENTIFIER
    ROWGUIDCOL NOT
    NULL UNIQUE DEFAULT
    NEWSEQUENTIALID(),
    FileSource varbinary(MAX)
    FILESTREAM DEFAULT(0x)
    go
    --Add default add date for document   
    ALTER
    TABLE dbo.DocumentFilesTest
    ADD CONSTRAINT
    DF_DocumentFilesTest_AddDate
    DEFAULT sysdatetime()
    FOR AddDate
    EXEC
    sp_fulltext_database
    'enable'
    GO
    IF
    NOT EXISTS
    (SELECT
    TOP 1 1 FROM sys.fulltext_catalogs
    WHERE name
    = 'Ducuments_Catalog_test')
    BEGIN
    EXEC sp_fulltext_catalog
    'Ducuments_Catalog_test',
    'create',
    'D:\SQL\PDFBlob';
    END
    --EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
    DECLARE
    @indexName nvarchar(255)
    = (SELECT
    Top 1 i.Name
    from sys.indexes
    i
    Join sys.tables
    t on 
    i.object_id
    = t.object_id
    WHERE t.Name
    = 'DocumentFilesTest'
    AND i.type_desc
    = 'CLUSTERED')
    PRINT @indexName
    EXEC
    sp_fulltext_table
    'DocumentFilesTest',
    'create',
    'Ducuments_Catalog_test', 
    @indexName
    EXEC
    sp_fulltext_column
    'DocumentFilesTest',
    'FileSource',
    'add', 0,
    'Extension'
    EXEC
    sp_fulltext_table
    'DocumentFilesTest',
    'activate'
    EXEC
    sp_fulltext_catalog
    'Ducuments_Catalog_test',
    'start_full'
    ALTER
    FULLTEXT INDEX
    ON [dbo].[DocumentFilesTest]
    ENABLE
    ALTER
    FULLTEXT INDEX
    ON [dbo].[DocumentFilesTest]
    SET CHANGE_TRACKING
    = AUTO
    ALTER
    FULLTEXT CATALOG
    Ducuments_Catalog_test REBUILD
    WITH ACCENT_SENSITIVITY=OFF;
    INSERT
    INTO DocumentFilesTest(Extension,
    Name,
    FileSource)
    SELECT
     'pdf'
    'BOL12006553.pdf'
    * FROM
    OPENROWSET(BULK
    'd:\SQL\PDFBlob\BOL12006553.pdf',
    SINGLE_BLOB)
    AS BLOB;
    GO
    INSERT
    INTO DocumentFilesTest(Extension,
    Name,
    FileSource)
    SELECT
     'docx'
    'test.docx'
    * FROM
    OPENROWSET(BULK
    'd:\SQL\PDFBlob\test.docx',
    SINGLE_BLOB)
    AS Document;
    GO
    SELECT
    d.*
    FROM dbo.DocumentFilesTest
    d WHERE
    Contains(d.FileSource,
    'BILL')
    Returns nothing. it should come from PDF file
    SELECT
    d.*
    FROM dbo.DocumentFilesTest
    d WHERE
    Contains(d.FileSource,
    'TEST')
    Returns from word document as follows:
    2           2014-06-04 10:11:41.393            test.docx docx           
    NULL   [BINARY Value]  [Binary Value]
    Any help is appreciated. Its been a long wait.
    Thanks,
    Vel
    Vel Thavasi

    Hello,
    Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
    The following thread is about similar issue, please refer to:
    http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click here.
    Fanny Liu
    TechNet Community Support

  • Interactive Report - Include Non-selected Column in Row Text Search

    Hi,
    We have an interactive report that contains many columns. NAME VARCHAR2(30), TYPE VARCHAR2(30) etc and DESCRIPTION VARCHAR2(4000).
    Normally the DECRIPTION column would not be shown (avalilable for dispaly via 'Select Columns' but not selected), however we need the default Row Text Search (ie direct entry into the search field instead of creating a column filter) to search the DESCRIPTION field wether it is selected for display or not.
    This will allow the user to enter a term that may be contained in the DESCRIPTION to find records without trying to display a 4000 character field in the report - which just looks horrible.
    We are using ApEx 4.1.1.
    Thanks,
    Martin Figg

    Hi Ray,
    As I expected this has got us very close. We went with the code:
    select
    facility_id,
    facility_name,
    '<span title="' || facility_desc|| '">'||substr(facility_desc,0,50)||decode(sign(length( facility_desc)-50),1,' (More...)',NULL)||'</span>' facility_desc,
    equipment_id,
    equipment_name,
    '<span title="' || equipment_desc|| '">'||substr(equipment_desc,0,50)||decode(sign(length( equipment_desc)-50),1,' (More...)',NULL)||'</span>' equipment_desc,
    from
    rf_full_item_list_vwhich works well. The only issue is that when you download to csv you get the html tags etc as well. Put I am a lot closer to a solution than we were.
    Thanks again.
    Martin

  • How can I get the text search to work in my Robohelp 7 .chm?

    The text search used to work but has stopped working.
    The compile says it is "Generating full-text search data..." and I'm getting no errors.
    This .chm is part of a merged .chm. The other merged .chms still have seaching ability.
    I'm wondering if perhaps I'm running out of space.  The .chm is 5,327 KB

    I gave up and repaired Robohelp 7. Now the text search works again.  One possibility is that I damaged Robohelp 7 when I installed a trial copy of Robohelp 9 and then uninstalled the trial copy.   Don't know for sure and I'm not willing to try it again just to find out. I'm just happy that I've got it working again.

  • Can I have a Text Search in HTML Help output?

    Hello,
    I'm relatively new to Robohelp and while testing the possible output methods I found that there is no internal text search function available for the Microsoft HTML Help (.chm) file.
    Does anyone know if it is possible to enable this function?
    Thank you
    Holli

    Hi Holli
    Perhaps try creating a brand new window?
    Make sure Microsoft HTML Help is your Primary Layout by right-clicking it in the Single Source Layouts recipe box.
    Then open the Project Set-up pod and create a new window.
    Then in the Single Source Layout recipe, make sure you choose the new window you just created.
    Recompile and check.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
    http://support.apple.com/kb/HT1454

Maybe you are looking for

  • Publishing w/FTP and spaces in file names

    I read that if I wanted to build a site in iWeb, and then publish to a 'non .mac' server (via FTP) that I'd have to make sure that all of my file and page names didn't have any spaces or special characters in them. I went thru all of my files and fix

  • Error in activating Sqlscript Calculation view - Data type mismatch

    Hi All, I am trying to create a Calculation view using sql script. When I try to activate the calculation view I get the below error., Could you please help. Error Internal deployment of object failed;Repository: Encountered an error in repository ru

  • Quicktime on Safari - no video only audio - why?

    I have Safari 2.0.4 I have OSX 10.4.10 I have G4 PowerMac with 1.4 Ghz upgrade, 1.5 Gb ram and Ati Radeon9200 Pci card. When I want to view a Quicktime video on Safari - no visuals, only sound. Quicktime on it's own is fine. Quicktime on Firefox is o

  • Difference between session facade and business delegate patterns

    Hi, How the session facade and business delegate patterns differ from each other, as both of them have similar and almost same forces to be addressed. Please address. Satya.

  • AIR, fullscreen, cpu power and a touchscreen pc: Help!

    hello all i need help on AIR in fullscreen mode, cpu power and cores. i am a ("2 years old") self taught AS3 programmer, and i have written a specific gaming application which is intended to run on a touchscreen pc in full screen mode, as a gaming ki