Dumb move, help needed

I did the obviously dumb move of overwriting index.html with an older file and now I need to know if there is any way at all of rollingback the change?  The site is maintained with Contribute, I do my updates/changes (remotely) in Dreamweaver. I do not have Contribute installed, the website's owner uses Contribute to make her changes.  We are in different locations so I am trying to avoid having to drive there to look for the older file on her computer.  UGH.  Totally dumb, I know, but at this point I am just hoping there is a way to fix the problem with rollbacks or something of the like.  I am willing to buy Contribute if need be. I totally appreciate any suggestions -Thanks.

Here's a link to your Jan 25th version
http://webcache.googleusercontent.com/search?q=cache:EGL6vfh_g74J:www.mountain.santacruz.k 12.ca.us/+&cd=1&hl=en&ct=clnk&gl=us

Similar Messages

  • Help please re: a dumb move

    Hello, I managed to have the system track my iphone as an intruder and then kicked it off the network.  (in my defense it previously showed it as an iphone and for some reason it was showing as an unkown guest)  Anyway, now my iphone cannot use the wireless service as it says "Unable to join network"  Any tips on how to undue this dumb move?  I'd very much aprecciate any help you could provide!  ~Terri
    Solved!
    Go to Solution.

    Well, I tried alot of things. but the one that I believe did it in the end was simply requesting the network on my iphone using the network name and password.  Simple solution that took me hours to figure out.  I am not sure whether that would have worked however without completely uninstalling and reinstalling the cisco software and resetting the router.  I'd try the iphone thing first, it took only a minute.  Good luck, I hope it works for you! 

  • Help needed to move contacts

    hi, i have a problem that i have bought blackberry 8520.i want to switch my contacts from my old mobile samsung star s5230 to blackberry 8520.i have shifted my contacts from samsung to my laptop but i am unable to transfer from laptop to blackberry.i have tried to send some contacts to blackberry from laptop but blackberry doesnot show it.please let me know how can  i do it.i have also downloaded blackberry desktop software but i dont know how to shift contacts from laptop to blackberry.

    Duplicate...see:
    http://supportforums.blackberry.com/t5/BlackBerry-Curve/help-needed-to-move-contacts/m-p/1287437#nob...
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TOO MANY INQUIRIES - Chase Freedom - Dumb move :-/

    Let me preface by saying I made a dumb move today.  I am in the rebuilding phase still, and I applied for CHASE Freedom, and Barclay Rewards - both denied even on Recon. I got excited because my scores bumped from mid-500s 2 months ago to 600-610 across the board. . stupid move. I now have 6 inquiries in the past 60 days, a total of 11 since January. So far my scores have not taken any hits from INQ .. What are the odds I'll see a big dip? Or any dip at all? On a positive note, my UTIL has been lowered from 81% to 40% which will all update by 8/3 .. so that should hopefully help my score rebound, or at least cancel out one another. I am officially gardening until the New Year!!! I even put freezes on my burueas after the denials. I dont need judgment, just advice. :-) My scores 2 months ago were: TU 555 EX 560 EQ 540, as of today TU 600 EX 610 EQ 602. No lates in one year's time, 2 medical collections aging off soon. I almost have an addiction to applying for credit, and I got overly excited last month with my new approvals for CAP ONE (after charge off 2.5 years ago) for $1,000 lines. . Hence the freezes and GARDENING. Any advice would really help .. I am afraid of a large score dip with 2 new inquiries on top of the 4 I already had in just 60 days, even though I saw no dip last time. Go forth, credit kings !

    Joeyzoom416 wrote:
    Let me preface by saying I made a dumb move today.  I am in the rebuilding phase still, and I applied for CHASE Freedom, and Barclay Rewards - both denied even on Recon. I got excited because my scores bumped from mid-500s 2 months ago to 600-610 across the board. . stupid move. I now have 6 inquiries in the past 60 days, a total of 11 since January. So far my scores have not taken any hits from INQ .. What are the odds I'll see a big dip? Or any dip at all? On a positive note, my UTIL has been lowered from 81% to 40% which will all update by 8/3 .. so that should hopefully help my score rebound, or at least cancel out one another. I am officially gardening until the New Year!!! I even put freezes on my burueas after the denials. I dont need judgment, just advice. :-) My scores 2 months ago were: TU 555 EX 560 EQ 540, as of today TU 600 EX 610 EQ 602. No lates in one year's time, 2 medical collections aging off soon. I almost have an addiction to applying for credit, and I got overly excited last month with my new approvals for CAP ONE (after charge off 2.5 years ago) for $1,000 lines. . Hence the freezes and GARDENING. Any advice would really help .. I am afraid of a large score dip with 2 new inquiries on top of the 4 I already had in just 60 days, even though I saw no dip last time. Go forth, credit kings !You are doing the right thing now....Time to garden...

  • Help needed for grouping.

    Hi,
        Help needed .
    I have an internal table having 6 .
    Ex :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  10    10
    a     aa    12    p1  20    20
    b     aa    11    p2  30    30
    b     aa    12    p2  40    30
    Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
    To Display :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  30    30.
    b     aa    11    p2  70    60.
    can anyone help me.How to do this..?
    Thanks

    Here you go
    DATA:
      BEGIN OF cur_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(2)     TYPE c,
        f6(2)     TYPE n,
      END OF cur_tab.
    DATA:
      BEGIN OF sum_tab OCCURS 0,
        f1        TYPE c,
        f4(2)     TYPE c,
        f5        TYPE p,
        f6        TYPE p,
      END OF sum_tab.
    DATA:
      BEGIN OF final_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(5)     TYPE c,
        f6(5)     TYPE c,
      END OF final_tab.
    START-OF-SELECTION.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '10'.
      cur_tab-f6 = '10'.
      APPEND cur_tab.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '20'.
      cur_tab-f6 = '20'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '30'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '40'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      LOOP AT cur_tab.
        MOVE-CORRESPONDING cur_tab TO sum_tab.
        COLLECT sum_tab.
      ENDLOOP.
      LOOP AT sum_tab.
        READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                    f4 = sum_tab-f4.
        IF sy-subrc NE 0.
          WRITE:/ 'Something went very wrong'.
          CONTINUE.
        ENDIF.
        MOVE-CORRESPONDING cur_tab TO final_tab.
        MOVE-CORRESPONDING sum_tab TO final_tab.
        APPEND final_tab.
      ENDLOOP.
      LOOP AT final_tab.
        WRITE:/1 final_tab-f1,
              AT 5 final_tab-f2,
              AT 10 final_tab-f3,
              AT 15 final_tab-f4,
              AT 20 final_tab-f5,
              AT 25 final_tab-f6.
      ENDLOOP.
    and the output
    a   aa   11   p1     30   30  
    b   aa   11   p2     70   60  

  • Help needed with Vista 64 Ultimate

    "Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
    Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
    -The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
    When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
    Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
    once I set this to enabled Dolby and DTS went acti've.
    I also have a question on 5. and Vista 64
    -When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
    Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
    How do I make 5. render properly on vista

    We ended up getting iTunes cleanly uninstalled and were able to re-install without issue.  All is now mostly well.
    Peace...

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • Hi, I know the problem is in the movies & I need to download it too

    Hi, thanks for your help, but I know the problem is in the movies & I need to download it too,
    SO, what to do next to import all of them?
    AND, after I import it all at the Image Capture how can I move them to IPhoto.
    P.S: its my 1st time ever to be part of Apple Support Communities & share in it..its amaaaaazing

    Welcome to the Apple Support Communities!
    but I know the problem is in the movies & I need to download it too,
    Could you confirm your "image Capture" settings? How did you set the "Import to" pop-up?
    Make sure you import to a folder on your Desktop, and not into iPhoto.
    This way you can be sure, that no problem with the iPhoto library will interfere.
    Once you have the image files in a folder on the Desktop, test them by opening them and then import them to iPhoto.
    Is there a problem with posting answers for you? I notice, you keep creating new discussions for follow-up questions and answers. That makes it hard see all answers in context.
    If the "Reply" button is not working, close the Browser and sign in again. The software has a lot of problems right now.
    You other thread: Go to the message

  • Internal Microphone "Not Plugged In". *No help needed anymore*

    edit: no help needed anymore
    Hello. My internal microphone stopped working ever since I stopped using the default Toshiba version of Windows 7.
    I have downloaded all the correct drivers for my Toshiba L750-BT4N22, especially the Conexant SmartAudio HD driver.
    My internal microphone shows up in sounds/hardware, but it says "Not Plugged In". Also, every once in a while my sound get's choppy when I "seek" or move fast through a video file.
    Could use some help, thanks.

    I seem to have fixed it, thanks.

  • HELP Need to create large Windows CD ROM w/ Videos

    THE PROJECT:
    Create a CD-ROM for a 180 product line that features a
    product page for each item with a link to a 20 second video clip
    (currently in .MOV) format.
    THE PROGRESS:
    I've gotten past the "audio' issue I was having before by
    extracting the audio for each file in MP3 format... this works no
    problem. Everything is running great until I came to my latest
    hiccup.
    THE PROBLEM:
    I need this to be in a WIndows Projector (EXE) Format. I can
    output the windows Projector file from flash no problem... but when
    someone tries to run it on a PC it brings up a dos window for a
    split second and crashes.
    THE SOLUTION:
    I can think of a few possible solutions and I need help
    achiieving one ASAP as I'm screwed on this deadline....
    1) Get the Projector (EXE) file to work.
    Could there be a glitch in my file that's causing this error.
    I somehow doubt it as it's a very simple bit of Actionscripting (I
    am very rusty and was never very good with coding to begin with).
    Basically tried two methods... putting the video in the OVER state
    of the button.. or just having the button point to the next frame
    where the video resided. Ideally I'd love to just get this to work
    in projector format but we're looking at a large projector file and
    I don't know if that will work.
    2) Coding it to "Call" individual movies inside a core file.
    I have NO idea how to do this but I know you can script in
    flash to where it will grab a file (MOV, SWF, whatever) from an
    external folder and play it within a movie. I'm thinking a nice
    workaround (if file size is what is killing the Windows Projector
    option) is to have all 180 movies in an external folder on the CD
    and have the main EXE File call them into the main movie as needed.
    Would this work? How do I do it?
    3) The Backup Plan
    If niether of hte above work... how can I possibly patchwork
    this until I figure out the above. Is there a way to have a CD
    auto-open a fixed size browser window with no buttons or anything
    that calls a HTML or SWF file from the CD when inserted? This would
    work. Is there a way to store the STandalone Flash Player on the CD
    and use it to open the main SWF file (Which works fine)? Is there a
    downloader for the Flash Standalone (not in browser) player out
    there that I could put on the Disc that people could install from
    then view the SWF?
    I need help here people... somebody please save me....
    :(

    I have another idea... what about using a pop-up java code
    like:
    on (release) {
    getURL
    ("javascript:NewWindow=window.open('/test.swf','newWin','width=640,height=480,left=0,top= 0,toolbar=No,location=No,scrollbars=No,status=No,resizable=No,fullscreen=No');
    NewWindow.focus(); void(0);");
    from this site:
    http://www.flash-db.com/PopUp/
    Is there a way to make that code (or something like it) so it
    wouldn't have to call a
    http:// reference and would work with a local
    file in the same directory? Be it a .mov or .swf... whatever....
    Thoughts?

  • My rental stopped mid-movie, help. this has happened multiple times to me before too.

    My rental stopped mid-movie, Help. This has happened multiple times to me before too. I demand I get a refund.

    Hey preachit,
    It sounds like we are running into issues with the iTunes software connecting to your device. If possible, lets try plugging your iPhone 5 in with a different cable. Also, try plugging it in to a different USB port on your computer:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    We may need to isolate the issue down to the iPhone or the current installation of iTunes. If the above steps have not resolved your issue, remove and reinstall iTunes:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Thanks,
    Matt M.

  • Rental movie can't move -- help

    I have an Ipod Classic with 80G memory -- I rented two movies from iTunes - both movies appear to be on my Mac but I can't download them to my iPod. The movies should appear with a 'move' button but I do not see it. I haven't wanted to fool around too much with the movies since I do not want to start the 24 hour clock yet. Need help - traveling for T-day and I need entertainment! Thanks!

    Follow up -- thru some magic it finally worked. I was able to transfer the movies but needed to have an internet connection open at the same time ??? It was a lot of in and out of itunes, support, ipod on an off but it finally worked.

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

Maybe you are looking for