Dumb newbie question about viewing drive space

I just upgraded to 10.7.5 from 10.5. I used to be able to see my drive free space in my window, at the bottom. Now I can't seem to find it without going to Get Info. I would really like to see the available space of my connected drives without having to click on Get Info. Is this possible? Thank you for any help!!!

Easy.
Finder > View menu > "Show Status Bar"

Similar Messages

Quick question about showing drive space

Hi,
Just got a quick query about showing remaining drive space on the desktop.
Before I wiped my Pismo and reinstalled Tiger (bad kernel panic), my hard drive and any other connected drives (pen drive, iPod, iDisk, etc) showed up on my Desktop with the name and drive capacity and remaining space underneath the icon.
Now I've reinstalled, the drive capacity and remaining space don't show up on the Desktop, and I can't find how to turn it on. I've been through Preferences several times and can't find an obvious switch. Have I missed something? I'm running Tiger 10.4.8 with the machine spec below.
Thanks in advance,
Rob Johnson

Sometimes, for no obvious reason, the Finder can be slow to update. And sometimes it updates instantly. Why? "Only the Shadow knows...." or maybe the Apple programmers.
Francine
Francine
Schwieder

Question about Hard drive Space and Logic Pro

We just installed Logic Pro 7.2 (and Tiger) onto our Dual G4. We have nearly filled the bootup drive, with tonnes of space on our other hard drives (80GB and 100GB). With only ~4 GB left on the startup drive, will this cause problems with Logic Pro? We have more than the recommended RAM, but I was wondering if the hard drive space might be an issue, like with iDVD where you need ~8-10 GB free to burn a DVD.
I've been considering copying things over from my startup drive to my 80GB drive (which has tiger on it too)and making the 80 GB drive my new startup drive, but it's a bit of work and if I don't need to do it right away I don't want to bother. What is the recommended amount of free hard drive space and memory for Logic Pro to work well? I personally like to have ~10GB free for anything, but that might be tricky at this point. I want to know if I should go through with the hassle of moving things over or wait a bit and see how it goes. I've not ahd a chance to use the program yet, but I'd like to set it up and keep it working smoothly once I start to use it. Any advice or experience from anyone in this department?

Your best off having at least 25% free space of any hard drive.
With Logic, It is a good idea (though not necessary) to have your OS and apps on one HD, and your song files and samples (and other files) on another. I would also suggest that you get a hard drive with a speed of at least 7200rpms.

Question about hard drive space used

If I run OmniDiskSweeper to sweep my 15" G4 laptop hard drive, the total file size calculated is 31.3 GB. Likewise, if I clone the hard drive to an external drive using SuperDuper!, the total size used on the external drive is 31.3 GB.
However, if I "Get Info" on the laptop hard drive, the Used size listed is 41.9 GB. Likewise, 41.6 GB is listed as "used" in the OmniDiskSweeper Drive List window, as well as in another utility. I suspect that the 41.6 value is picked up from the Finder.
What could be the reason that Get Info lists the space used on the hard drive as 10 GB larger than the total size of the files?
1.5 GHZ PowerPC G4 Mac OS X (10.4.9)
Dual 2 GHz G5 Mac OS X (10.4.4)

Hmm, I think I have a possible answer. I had to download OmniDiskSweeper and open the help from its Help menu to get this answer.
It says in the help for OmniDiskSweeper:
"OmniDiskSweeper only displays files that you have access to from the user account you are logged into. Files in restricted folders are not available and their sizes are not included in the total file sizes you see."
So, if you have other user accounts, then those files won't necessarily be readable and hence not counted in OmniDiskSweeper. There may also be a few system files and folders that might be unreadable and hence not counted. That should be fine since you probably shouldn't be randomly deleting system files.
I've also noticed that OmniDiskSweeper shows slight variations of total sizes in its different windows, so it's not too precise. That probably comes from the dynamic nature of hard drive use by the computer, and OmniDiskSweeper trying not to use too many cpu cycles updating incessantly. Just guessing on that part though.
The 10GB is most likely other user accounts or something else not readable from your own account. The Finder lets you know of course, but OmniDiskSweeper only presents to you what you have permission to access. That doesn't necessarily mean you'll also have permission to delete those things.

Dumb, newbie question about Quicktime

I recently switched from PC to Mac, so I do not have much experience using Quicktime, rather than WMP. My question is this: Can I configure Quicktime to open internet videos in an external player, rather than in the web browser? The reason for the question is that the videos playing in the browser are very small, and I don't see a way of increasing the display size. Any help is appreciated.
iMac Mac OS X (10.4.7)

The Web page authors decide what size is displayed. They can also send the linked file directly to the QuickTime Player so it opens in its own window.
Users (viewers) can't adjust the size if the file is told to open via the browser plug-in.

####a question about jdbc driver

A question about jdbc driver: for Oracle JDBC drivers which will not allow O/R
tools to access columns over 4 kb. This affects some of the functionality of my
application.A workaround is to use the my JDBC driver that acts as a wrapper to
ensure that columns over 4 kb read and persist properly. my JDBC driver determines
which actual driver to load based on the connection URL. If you pass in a URL
that contains the string jdbc:oracle:thin, it will know to load oracle.jdbc.driver.OracleDriver.
If the URL contains the string jdbc:db2, it will know to load COM.ibm.db2.jdbc.net.DB2Driver,
and so on.
now i have set CLASSPATH for my jdbc wapper,when I Creating and Configuring a
JDBC Connection Pool,i have to input my driver name such com.lawrence.driver.....then
i did,all
is well,then i restart my WLS,when load config.xml,some errors such as "No registered
driver accept URL:jdbc:oracle:thin:@localhost:1521:lawrence",if i set driver name
is oracle.jdbc.driver.OracleDriver,all is good,no any errors.
I find some questions like:
1.for WLS8.1 ,it is only find some registed driver?
2.why it cannot load my driver wapper when it is loading jdbc Connection Pool,but
when the WLS start is finished, i Creating and Configuring a JDBC Connection Pool
then it is right?

my JDBC driver like this:
public class myDriver implements Driver {
     public static String DB2_DRIVER = "COM.ibm.db2.jdbc.net.DB2Driver";
     public static String DB2_URL = "jdbc:db2:";
     public static String HYPERSONIC_DRIVER = "org.hsqldb.jdbcDriver";
     public static String HYPERSONIC_URL = "jdbc:hsqldb:";
     public static String MYSQL_DRIVER = "com.mysql.jdbc.Driver";
     public static String MYSQL_URL = "jdbc:mysql:";
     public static String ORACLE_DRIVER = "oracle.jdbc.driver.OracleDriver";
     public static String ORACLE_URL = "jdbc:oracle:";
     public static String POSTGRESQL_DRIVER = "org.postgresql.Driver";
     public static String POSTGRESQL_URL = "jdbc:postgresql:";
     public static String SQLSERVER_DRIVER =
          "com.microsoft.jdbc.sqlserver.SQLServerDriver";
     public static String SQLSERVER_URL = "jdbc:microsoft:";
     public boolean acceptsURL(String url) throws SQLException {
          return true;
     public synchronized Connection connect(String url, Properties props)
          throws SQLException {
          if (_driver == null) {
               Class driverClass = null;
               try {
                    if (url.startsWith(DB2_URL)) {
                         driverClass = Class.forName(DB2_DRIVER);
                    else if (url.startsWith(HYPERSONIC_URL)) {
                         driverClass = Class.forName(HYPERSONIC_DRIVER);
                    else if (url.startsWith(MYSQL_URL)) {
                         driverClass = Class.forName(MYSQL_DRIVER);
                    else if (url.startsWith(ORACLE_URL)) {
                         driverClass = Class.forName(ORACLE_DRIVER);
                    else if (url.startsWith(POSTGRESQL_URL)) {
                         driverClass = Class.forName(POSTGRESQL_DRIVER);
                    else if (url.startsWith(SQLSERVER_URL)) {
                         driverClass = Class.forName(SQLSERVER_DRIVER);
                    _driver = (Driver)driverClass.newInstance();
               catch (Exception e) {
                    throw new SQLException(e.getMessage());
          Connection con = _driver.connect(url, props);
          return new myConnection(con);
     public int getMajorVersion() {
          return _driver.getMajorVersion();
     public int getMinorVersion() {
          return _driver.getMinorVersion();
     public DriverPropertyInfo[] getPropertyInfo(String url, Properties props)
          throws SQLException {
          return _driver.getPropertyInfo(url, props);
     public boolean jdbcCompliant() {
          return _driver.jdbcCompliant();
     private Driver _driver;

Dumb newbie question -- shell vrs linux console

This is probably a dumb newbie question, but what is the difference between the shell screen and the linux console screen? I used another system before Arch and I believe there was only the shell screen! Does it matter which one is used? Thanks -- Larry

The console is the 2D text rendering thing. The shell is Bash, just a program that handles your input and has the console as output.
If on the other hand you mean the console at startup, and you call that the console while you call xterm, etc. shells then the answer is different. It's just a matter of configuration if you automatically start X or not. A lot people use gdm or kdm to get a graphical login screen after bootup, others just type "startx" in the console when they want to start X.
You can switch to the console with Ctrl+Alt+Fn where n is a number between 1 and 6. You can switch between consoles with Alt+Fn, X is on the last console, so to go back to X do Alt+F7.

Newbie question about saving files

Hi all,
A newbie question here, and maybe it is a dumb question, but I can't get my head around this and sofar found no answer in the forums here.
When I save a file on my macbook, I can only save it to "top" folders.
What I mean is I try to save a file for instance to documents/worddocs/lyrics just to say something, then I have to save the file first to documents, and the move it to the lyrics folder via finder or move it to :worddocs folder and then move it again to the lyrics folder. Hope you still get my drift here
Is there a way to just save it to the subfolders without going through all this moving around?
Thanks in advance for any advice
Peter

When you click File>Save As, you will see the Save As window pop up. At the top, you will see a box entitled Save As, which has a space for your to enter the file name. To the right of this box is an arrow pointing down. Click it. The full file hierarchy will be seen. Then you can save directly to the file you want.
Hope this helps.
Don

Very basic questions about hard drives

I'm upgrading from vintage Beige G3, so much of the jargon about internal drives is new to me.
My MacPro will come with an OEM 160 GB drive. I will use this for my primary boot drive -- OS and Apps. All my data, photo files etc. will be kept on my second/third drives. I do not plan any sort of RAID setup. Windows is going nowhere near my Mac.
For the extra drives --
1) SATA? SATA II? What's the difference and is it critical?
1a) What is a "raptor" drive?
2) Does size matter (we're talking about GBs here, guys...)
3) Reliability is more important to me than speed or noise. We're a long long way from any technical help or even UPS.
4) Do new drives need to be formatted before using them internally?
5) If I partition one of the extra drives so I can keep a clean, backup OS boot partition, I need to format it as GUID, correct? Or does that just apply to external firewire boot drives? Does it matter which partition will be the boot partition?
6) I've read discussions about firmware requirements for some drives. What's that all about?
I was leaning toward MaxLine Pro 500 GB drives, but have been reading (reading too much, perhaps?) and now have all the above questions/concerns. (Whatever happened to the good ol' days of "buy an IDE drive, insert, play"?)
Thanks for your patience with these questions. I need to get it right the first time because of our remoteness!

1. SATA 1 interface speed rated at 1.5 Gb/s; SATA II interface speed rated at 3.0 Gb/s.
2. Drive ratings/performance is determined by many factors. You can best find out about individual drive performance by visiting http://www.storagereview.com/ to see their benchmark results on various drives. You will also find some helpful comparisons at http://www.barefeats.com/.
3. As for drive specs see previous answer. Generally speaking within any manufacturer's category of drive models for a given size the fastest drive will be the most expensive. Manufacturer specs usually do not provide any idea about drive performance in real world situations. Only benchmark comparisons are really useful, and even those can be confusing.
4. Yes, you can boot an Intel Mac from an APM partitioned drive. You simply cannot install OS X from the installer disc because it will refuse to install on a drive that has not been GUID partitioned.
5. Some older Seagate 750 GB models were not working properly when installed in a RAID configuration on Mac Pro computers. Seagate provided a firmware update to fix the problem for those who already owned the affected drives.
I don't know where you got the idea that Intel Macs were "picky about such things." Nor that installing drives in a beige G3 was a no-brainer. The old beige G3 required a lot of mechanical effort to mount a new drive internally. You not only had to connect all the various cables, but if you had two drives on the same ribbon cable each drive had to be jumpered properly - one as MASTER and one as SLAVE. Some older ATA hard drives had two different jumper settings for a MASTER - MASTER solo and MASTER w/SLAVE. Some beige G3 models wouldn't even boot OS X unless it was installed on a MASTER drive. And, you could not install OS X on a large drive except by partitioning the drive with an 8 GB partition for OS X that had to be the first partition on the drive. RAIDs may work or not depending on if you ran OS 9 or OS X. At least to me that wasn't the "good old days" unless you were comparing installing ATA drives to dealing with SCSI. I would say that in your particular case you were lucky, and you never tried putting two drives on the same ribbon cable. Oh, and I forgot about the size limiting jumper on most ATA large drives to limit capacity to 32 GBs because that's all that was supported by FAT32. Oh, yes, and the beige G3's disk controller did not support drives larger than 128 GBs.

2 newbies question about diskgroups

Hi gurus,
I have 2 newbies question:
Im working in a RAC Database (11.2.0.3) on Redhat 5.3 with some disk groups. One of this groups have 6 disks on it with different space (134, 236G, 236G, 185G, 185G and 185G).
My questions are:
1) What would be happend when the lower space disk will be full?
2) At this moment the diskgroups are at 45% so i was thinking to change their spaces to have all with the same space (around 193G each), it would create any problem? i should restart database or can do it with database up?
Thanks

if a disk is filled, what would happen? could i resize the disks with same size without stop database and without affecting the data stored within each disc?
By the word 'disk' I assume you mean LUN . When a LUN in a disk group is filled, ASM will use the remaining LUNs to store the data. You should always use LUNs of uniform size to avoid uneven I/O .
could i resize the disks with same size without stop database and without affecting the data stored within each disc
You can get the Unix/Storage team to allocate more LUNs for this Server. Once these LUNs are added , check if the following pre-reqs are met for the LUN which is yet to be added to the disk group
v$asm_disk.HEADER_STATUS = 'CANDIDATE'
v$asm_disk.PATH = /dev/rdsk/youLUNname
v$asm_disk.NAME will be NULL
Now you can add the LUNs using
alter diskgroup DATA_DG01 add disk '/dev/rdsk/youLUNname' rebalance power 4 ; wait for rebalance to finish (check status in V$ASM_OPERATION)
Yes. The above can be done without stopping the DB. It won't affect the stored data either.

Newbie Question about FM 8 and Acrobat Pro 9

Hello:
I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
My newbie question is whether there is a way to create a PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
TIA,
Kimberly

Kimberly,
How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
Temporarily change the color definition for the color used in the cross-reference format to black.
Temporarily change the character format to not use that color.
Temporarily change the cross-reference definition to not used that character format.
Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
- Michael

Newbie question about loading servlets on tomcat

I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
http://localhost/servlet/HelloServlet
Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
Many thanks
Marc

You have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
<web-app>
<servlet>
<servlet-name>HelloServlet</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/HelloServlet</url-pattern>
</servlet-mapping>
</web-app>

Two (too much?) newbies questions about KT3 Ultra 2

Goodmorning all.
I've bought a KT3 Ultra2 (MS-6380E) motherboard and i've two questions about it.
First of all I need to buy the optional S-Bracket to use my SPDif sound sistem... where can i buy it in Italy or in Internet?
In second i've to know the highest processor my MB support becouse i have to upgrade my PC.
Can U help me?
Tha a lot and sorry for disturb.
Hallo.

Hello,
question 2, not sure about question 1,
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=341&kind=1
You may need this BIOS update too.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=341&kind=1

Newbie question about entity and view objects

Hi everyone,
My first ADF application in JDeveloper is off to a difficult start. Having come from a forms background, I know that it is necessary avoid using post-query type lookups in order to have full filtering using F11/Ctrl+F11. This means creating an CRUDable view and getting as much of the lookup data as possible into the view without losing the ability to modify the data. In JDeveloper, I do not know how to build my data model to support that. My thought was to start with a robust updateable view as my main CRUD EO and then create a VO on top of that with additional EOs or VOs. But, I have found that I cannot add VOs to another VO. However, if I link the VOs then I have a master-detail which will not work for me.
For example, I have two joins to CSI_INST_EXTEND_ATTRIB_V shown in the queries below and need to have that show in the table displaying the CRUD VO’s data. It seemed that the best way to do this is to create a CSI_INST_EXTEND_ATTRIB_V entity object and view object. The view object would have two parameters, P_INSTANCE_ID and P_ATTRIBUTE name. Both the building and the unit are needed on the same record, and this is not a master-detail even though it might look that way. (A master-detail data control will not work for me because I need all this data to appear on the same line in the table.) So, I need help figuring out the best way to link these to the main (CRUD) view; I want as much of this data as possible to be filterable.
select
cieav.attribute_value
from
csi_inst_extend_attrib_v cieav
where cieav.instance_id = p_instance_id
and cieav.attribute_code = 'BUILDING NAME'
select
cieav.attribute_value
from
csi_inst_extend_attrib_v cieav
where cieav.instance_id = p_instance_id
and cieav.attribute_code = 'UNIT NAME'
Ultimately, I need to display a ton of data in each record displayed in the UI table, so a ton of joins will be needed. And, I need to be able to add records using the UI table also.
James

Hi Alejandro,
Sorry if I caused confusion with my first post. What I had in mind assumed that I could have a single CSI_INST_EXTEND_ATTRIB_V EO with a BuildingVO and UnitVO on top of it. So, I wrote the queries individually to show how I would invoke each view. When I realized that confused the issue, I rewrote the query to explain things better.
Now having seen your 2 queries. You need to create 2 EO. One for each table. Then create an association between the 2 aeO (this will be the join you are talking about). Then, you need to create a VO based on one of the EO and after you can modify and add the second EO (in here you select the join type).
After your done with this, youll have 1 VO that supports CRUD in both tables.
There were three tables in the query: CIEAV_BUILDING, CIEAV_UNIT, and T -- the main CRUD table. When you say that I should create two EOs, do you mean that they are to be for CIEAV_BUILDING and CIEAV_UNIT? Or, CIEAV and T? Assuming CIEAV and T, that sounds like it would allow me to show my building or unit on the record but not both.
By the way, everything is a reference except for the main CRUD table.
Look forward to hearing from you. Thanks for your help (and patience).

Question about viewing hard drives in windows

So I just Installed windows on my macpro, on a second internal hardrive. Now when I run in OSX I can view the harddrive that windows is installed on, but when Im in windows I can't get into the harddrive with OSX on it.
I've looked in device manager and windows is saying that there is reading the OSX drive, but basically says its blank and I can't use it.
I really want to be able to swap info between these hardrives. Any advice?

You need to install the Boot Camp drivers from a Mac OS X 10.6 DVD or third-party software such as MacDrive.
(55693)

Dumb newbie question about viewing drive space

Similar Messages

Maybe you are looking for