Dumb question on cmss and

so if I have cmss on and then actually play some 5. content does it still use cmss or is it using the true 5. format.
just wondering if I should turn cmss off when watching dvds or if it automatically gets overwritten when something is in true 5. format.

You may get a reply faster on this by emailing creatives tech support... I'd imagine they could readily provide that info for you.
Response time is usually day for your first message on an issue so it's not that bad of a wait.

Similar Messages

A dumb question about kelvin and white balance in Lightroom

I keep reading a high kelvin number is cooler and a low number is warmer, but in light room, in the develope module, the lower number ( 3500 ) is blue, and a higher number, (7000) is very yellow. What am I missing?

Lee is essentially correct with his analysis but incorrect with the details. The Kelvin colour temperature scale is between Yellow and Blue, not Red and Blue as stated.
There's a lot of confusion about this, with many digital photographers missing the significance of the difference between cyan and blue, magenta and red etc.
To be fair, the printing industry has added to the confusion by traditionally calling printing inks Blue, Red and Yellow when they really are cyan, magenta and yellow.
Even Adobe can get it wrong. In the initial Lightroom beta release, the temperature scale had the colours Cyan at one end and Yellow at the other. I suggested it be changed to Blue to make it correct and less confusing which thankfully was implemented in the next update.
Despite decades of working with colour both in the darkroom and with Photoshop, I too struggle with the counter-intuitive approach of the colour temperature reading in Lightroom.
Essentially, if you shoot in light that is too blue, then you need to add Yellow. So the Kelvin number displayed in Lightroom isn't the 'Mired' correction or the amount of Yellow added, but a readout of the scene's original colour temperature before the Yellow correction.
This can be really useful. I use several different branded flash units with various reflectors and attachments. I recently ran a test, shooting a Macbeth colour checker with all the different combinations.
I then used the White Balance Selector (dropper) on the neutral 5 patch and wrote down the resulting colour temperature.
From that I could work out what filter corrections I needed to use on each flash and reflector to produce consistent daylight balance.
Most flashes seem to be around 6000ºK but I had variation between 5200ºK & 6400ºK with the combinations.

My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question

I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question

If both computers were configured identically, then they would both lose the same amount of battery life with respect to the same starting configuration - comparing apple to apples. I don't know how much the added RAM, etc. would reduce battery life, but it would be less for both models.
Battery life is a tricky subject because most mfgr.s like to suggest as long a life as possible, but often do so under a set of conditions that are not common to most users. Apple is no different. Their computers do have good battery life, however. But not likely as long as what is in the ads for the typical user.

Where do i find the reference number for my preorder? and yes i no this is prob a dumb question but i cant find it anywhere......

Where do i find the reference number for my preorder? and yes i no this is prob a dumb question but i cant find it anywhere......

Hi droidboy52999,
Your email won't have the same confirmation number as it was ordered over the phone. You will need the last name used for the order, the location code (this ends in 01) and an order number (five to six digit number). Please keep us posted if you need further assistance with this.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame st

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame still there. Is there a "apply change" or similiar command that I simply cannot see.

brings the image back, straightened, but with the skewed back ground frame
PSE did what you told it to do. Choose the Straighten and crop edges or fill edges options when you use the straighten tool if you want it to do more than just straighten the contents of the image. Many people prefer the plain straighten because they'd rather crop themselves than let PSE do it.

Might be a dumb question, but I am moving from 1st gen to iPadair; on Safari, 1st gen to delete apps/sites just visited, you could double tap home key and apps would appear on bottom and one could delete from there. How does it work on ipadair?

This may be a dumb question, but nonetheless, here goes:
I just moved from 1st gen ipad to new ipad-air. Great and happy! But, one thing I can't figure out how to do is to delete the pages/sites/apps that I have just used? For example, on the 1st gen. you could double-tap home button and past actions would come up on bottom of screen. I could then delete them one by one, to keep things cleaned up. Am I missing something here? Does it keep a log irregardless? Not the same as deleting history - at least didnt' work for me.

Close apps and not delete apps.
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

Dumb question re video card

I bought a radeon 9800 pro graphics card to upgrade my 64mb. stock card and before installing noticed that the new card has one DVI port and one VGA port. the box says it runs dual displays, right now I have dual CRTs running but want to run two flat panels soon.
so the dumb question, can I convert the VGA to DVI with just a cheap adapter and run dual flats without buying an expensive converter for the second VGA port?

Hi Prankster,
you wont be able to get dual digital support from the 9800 ...sorry.
Of course, you might be able to *physically connect* two digital flat panels to the card but one of the monitor connectors will be recieving an analog video input signal from this graphic card.
To get true dual digital support from ATI you would need the 9600 or 9700 Pro graphic cards.
Hope this helps !
Cheers,
Chris Chamberlain

Using the USB port for an external HD dumb question

OK. Forgive a possibly really dumb question here...
My external HD has a USB 2.0 interface and I hooked it up to the USB port using a cable that came with an old USB 1 hub I'm not using right now.
My dumb question is this: is there such a thing as a USB 2.0 cable? Or are the USB cables all the same?
Also, how long should it be taking to transfer 12.1 GB of data (about 9,000 photos) from my external HD mounted on the AirMac base station to my MBP? There are still 48 minutes left and it seems an awfully long time for 12.1 GB of data. That's why I was wondering if the cable could be an issue...
Thanks,
doug

I am suspecting now that my HD might really have been a USB 1.0 drive...
doug

Two really quick/dumb questions!

Hi All,
I have just bought a new Mac Mini and hooked it up to my Samsung 55 inch TV via HDMI and everything seems do be working great.
My two dumb questions are:
1: where on the new OS (I had a Mac 5 years ago and things have changed) is the top "Finder" bar and "disc" icon to save files?
2: In Safari I do not seem to have a tools bar where I can for example open another tab for a new web page.
Hope you can help a nubby :-)

You are running a Mini so it might be that the screen resolution is not exact for your display. I have used a Mini with a conventional display but not HDTV. You might need to go into the settings for the TV to set the screen resolution to accommodate the mini's capabilities. Sorry that I can't offer more on that score; when I use my Sony Bravia HDTV it is with the iPad2 and HDMI and I have encountered no issues. Perhaps someone else on the forum has better insight into the Menu Bar problem on the Samsung as the principal display.

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out?

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out? I am using a MacBook.

Press "Command P" and when the Print dialogue box comes up, towards the bottom there is an option allowing you to choose the text size, i.e: small, med, large.
Hope this helps,
NEIL

Dumb question but How do you know what generation iPad you have?

Dumb question but how do you know what generation iPad you have? I got mine as a gift on Xmas day 2012 but don't know how to find out what version/generation it is. Can someone help me find that info? I have looked within settings & elsewhere and I cannot find it. Thanks in advance!

Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(83797)

Dumb Question??

I hope the philosophy here is that there is no such thing as a dumb question.
Here goes.
Adobe Classroom in a Book for Premier Pro states that when opening a New Project under the Project tab you have two choices DV or HDV when in actuality the choices in my version of CS4 are HDV and QuickTime. I have been under the impression that QuickTime can be either DV or HDV and with that premise I do not understand what my choices are.
Thanks
Kent

Different people's brains work differently. I am convinced that right
brain/left brain only scratches the surface. What is patently obvious
to one is shrouded in mystery to another.
(And then there's the issue of *my *brain. I've killed so many of its
cells over my 33+ years of adulthood that nothing is obvious anymore.)
People also make mistakes. And I mean everybody.
-Jeff

Really dumb question re Quicktime Pro

Good morning . .
My Mac is running OS 10.4.9 and I have updated my Quicktime player to 7.3.1.
Purchased Quicktime PRO, registered successfully but still only get Quicktime Player when opening the program. Any suggestions where to find QT Pro? Sorry for the dumb question but thanks for your help.
Jon

There is no separate QT Pro application. Successfully registering Pro enables Pro features already present in the Player. Items that previosly mentioned Pro should now just list the feature without mentioning Pro.
Message was edited by: Dick Napoli

Warning... dumb question ahead: Tech guy who set up my Mac didn't give me my password info. Didn't need it till I decided to finally download a Flash Player upgrade, which won't complete process without my Mac password. Suggestions?

Warning... dumb question ahead: Tech guy who set up my Macbook Pro didn't give me my password info, and yes I forgot to ask for it. Didn't need it till I decided to finally download a Flash Player upgrade, which won't complete process without my Mac (Admin?) password. Suggestions anyone?

Warning... dumb question ahead: Tech guy who set up my Macbook Pro didn't give me my password info, and yes I forgot to ask for it. Didn't need it till I decided to finally download a Flash Player upgrade, which won't complete process without my Mac (Admin?) password. Suggestions anyone?
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Changing or resetting an account password

Dumb question on cmss and

Similar Messages

Maybe you are looking for