DUMMY GUIDE NEEDED

Just bought AE and having mega-trouble with the install. PC wired to a netgear wireless router which is wired to the modem. Followed the directions, and the green light went on, but only when connected via wire. At present, the stupid thing is blinking amber. Any direction or thoughts are immensely appreciated.

done

Similar Messages

Dummy Guide needed for converting AS2 code into AS3

I have to convert my existing AS2 code into AS3, but I might as well be reading chinese. I never even began to learn AS3, it was still fairly new at the time and the class ended before we had an opportunity to even touch on it. My major was not web design, it was the print side of design. I took an additional class, after I graduated, to learn web design and our teacher told us, basically, that we were designers, not coders so we won't be getting much into actionscripting, beyond the basics. At the time I was relieved, but looking back, I really wish we would have gotten more into it. Bottom line, I need to learn now.
Is there ANYONE that can help me out? I will list my code below, buy I am way beyond lost any help that can be provided, I would be so grateful!!!!
On the main timeline I have the basic..
stop(); -- I found the AS3 version, but I don't know what I'm looking at. I get "not_yet_set.stop()" and there are are 8 options I can choose from. I just want the timeline to stop until I tell it where to go next. And what is "not_yet_set"
Then I have my buttons, which are, basically...
on (release) {
gotoAndStop("Home");
Or "gotoAndPlay("Whatever");"
I also have buttons for scrolling...
on (press) {
play();
on (release) {
stop();
AND
on (press) {
_root.AboutMe_Controller.gotoAndPlay(…
on (release) {
_root.AboutMe_Controller.gotoAndStop(…
For the on(release) command, this is what I found as the AS3 version: not_set_yet.dispatchEvent()

because that's really as1 code, you have steeper learning curve than going from as2 to as3.
first, remove all code from objects, assign instance names to your buttons and you can then start on as3:
// so, if you name your home button, home_btn:
home_btn.addEventListener(MouseEvent.CLICK,homeF);
function homeF(e:MouseEvent):void{
gotoAndStop("Home");
p.s. the not_yet_set stuff is there because you tried to use script assist or some other actionscript shortcut.

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

XI introductory Guide needed.

Hi everybody i am vey new to XI can any one please share me the usefull meterial to get into XI initially . When i look at the sap.help.com , its rather confusing me.
Thankyou in Advance .
Edited by: krishnakanth kakarla on Sep 8, 2008 1:41 PM

search forum
Refer these links which helps u to learn XI
Introduction about XI
For scenarios refer this wiki.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
for guides try this link.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/home
SAP XI INTRODUCTION
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
http://www.erpgenie.com/sap/netweaver/xi/namingconventions.htm
http://www.erpgenie.com/sap/netweaver/xi/howto.htm
http://www.erpgenie.com/sap/netweaver/xi/tips.htm
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
https://www.sdn.sap.com/irj/sdn/wiki
Interfacing to XI from Webdynpro
Understanding message flow in XI
Ready Reference for XI Developers
Message Mapping
Message Mapping Simplified - Part I
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
New functions in the Graphical Mapping Tool XI 3.0 SP13
File Content Conversion for Multi Hierarchical Structure
Message Splitting Using the Graphical Mapping Tool
Number formatting to handle LARGE Numbers
Optimizing Lookup's in XI
Minimize memory usage during Message Mapping when replicating an element
Mapping Context Changes in XI
/people/jeyakumar.muthu2/blog/2005/12/19/data-mining-using-apriori-algorithm-in-xi-150-part-ii
/people/jeyakumar.muthu2/blog/2005/11/23/data-mining-using-apriori-algorithm-in-xi-150-part-i
/people/jeyakumar.muthu2/blog/2005/12/30/data-mining-using-apriori-algorithm-in-xi-150-part-iii
Java Mapping to handle flat files in SAP XI
xpath functions in xslt mapping
"JAVA MAPPING", an alternate way of reading a CSV file
B2B Mapping Techniques Using the Graphical Mapping Tool
Duplicating Subtrees and Numbering Them Using the Graphical Mapping Tool
How to parse "XX/YY/ZZ;AA/BB/CC;11/22/33" in message mapping.
Introduction to queues in message mapping
Handling of Mixed Content Element in XI
The specified item was not found.
The specified item was not found.
ValueMapping using the Graphical Mapping Tool
Accessing Value Mapping defined in Directory using Java functions
Comparing Performance of Mapping Programs
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Runtime WorkBench Monitoring
XI CCMS Alert Monitoring : Overview and Features
The specified item was not found.
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
The specified item was not found.
The specified item was not found.
The specified item was not found.
The specified item was not found.
XI : How to Re-Process failed XI Messages Automatically
BPM
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
Walkthrough with BPM
Reconciliation of Messages in BPM
RFC Scenario using BPM --Starter Kit
The specified item was not found.
Schedule Your BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Sync/Async scenarios without BPM
Sync/Async communication in JMS adapter without BPM (SP19)
IDOCs (Multiple Types) Collection in BPM
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
File to File Scenario
Step by Step Guide: XML File 2 XML File Scenario: Part I
Step by Step Guide: XML File 2 XML File Scenario: Part II
Converting XML to PDF using XI
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
"JAVA MAPPING", an alternate way of reading a CSV file
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Push Data to MVC Architectured application using XI
How to send any data (even binary) through XI, without using the Integration Repository
XI in the role of a FTP
The specified item was not found.
The specified item was not found.
The specified item was not found.
The specified item was not found.
IDOC Scenario
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
RFC Scenario
Exposing BAPI as Web Services through SAP XI
RFC Scenario using BPM --Starter Kit
The specified item was not found.
The specified item was not found.
HTTP to RFC - A Starter Kit
Also refer the below help:
1) What is XI:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
2) Design and Configuration:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
3) Integration Processes (ccBPM)
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
4) Central Monitoring:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
5) Adapters:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
Just go through the below link which has all the topics:
http://www.sap.com/services/education/certification/certificationtest.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA282F33B1BD441FBE4083F2C923E33EA0C5960F8C8950FDEB6081ABED6E0E05E2617A693D85077260F9EA218716A79AEF3AA57C7D5E8975334%7cE41BF735AA1862BF88AE1830FD06B8FCD2D8AECBF5109A3E
File 2 file:
Step by Step Guide: XML File 2 XML File Scenario: Part I
File content conversion:
FCC
Ref:
Sender -
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Key value:
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter) -
TAB delimited
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
NAB the TAB (File Adapter)
NAB the TAB (File Adapter)
Receiver FCC no need of Endseparator
File Adapter (Receiver) - Are we "really" sure about the concepts?
RFC:
Weblog to send Response from RFC to File in Asyn Mode Using Proxy
HTTP to RFC - A Starter Kit HTTP to RFC - A Starter Kit
Weblog to send Response from RFC to File in Asyn Mode Using Proxy: Weblog to send Response from RFC to File in Asyn Mode Using Proxy
IDOC:
ALE configuration for pushing idocs from SAP to XI
ALE configuration for pushing idocs from SAP to XI
IDOC testing using WE19
Reposting IDocs instead of Recreating - For Testing Purpose (XI)
IDOC configuration :
This is expalined both the scenarios:
Please follow the below process for configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system Maintain Port (WE21) Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
IDOC Collecting
ave a look at this Blog
Collection of Multiple type IDOCs in BPM By Pooja Pandey Collecting IDocs without using BPM By Stefan grube's
Collecting IDocs without using BPM
XI:Idoc Message Packages By Sravya Talanki Collecting from Multiple Interface and sending it to R3 By Prasad Babu Nemalikanti
Idoc to File:
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Collection of IDoc to Single File
IDOCs (Multiple Types) Collection in BPM
BPM:
Walkthrough with BPM - Walk through BPM BPM in XI https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
BPM-1 Walkthrough with BPM
BPM-2 Reconciliation of Messages in BPM
BPM-3 RFC Scenario using BPM --Starter Kit
BPM-4 The specified item was not found.
Schedule BPM Schedule Your BPM
Use of Synch - Asynch bridge in ccBPM Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
Use of Synch - Asynch bridge in ccBPM https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
without BPM Sync/Async scenarios without BPM
without BPM1 Sync/Async communication in JMS adapter without BPM (SP19)
IDOC BPM IDOCs (Multiple Types) Collection in BPM
multimapping without BPM /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
PRoxy:
First start with configuration:
ABAP Proxy configuration:
How do you activate ABAP Proxies?
ABAP Proxies in XI(Client Proxy)
Smarter Approach for coding ABAP Proxies
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/frameset.htm
for java proxies
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
ABAP proxy:
ABAP Proxy
Client Proxy -
ABAP Proxies in XI(Client Proxy)
In this case you can define you scenario as a proxy to File. The blog explains the proxy part. Map the structure to a file and complete the scenario.
Please chekc this PDF :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
Server Proxy -
ABAP Server Proxies
File to Inbound Proxy:
File to R/3 via ABAP Proxy
Debugging Inbound Proxy:
XI: Debug your inbound ABAP Proxy implementation

Performance Tuning Guide Needed.

I've seen numerous references to a "Performance Tuning Guide" Is there
any way this document could be posted on the weblogic customer
downloads.
We desperately need this information. Even with working with Support so
far the process has been trial and error. Try this, then try that. I've
burnt many days just playing around with the properties and so far no
luck.
I've read just about every post in the performance newsgroup. Some seem
to be the same types of problems we are currently facing. Great
response when there are about 50 users. Horrible around 65. Slowness
doesn't seem to be gradual. All of a sudden it starts to crawl. So far
I haven't seen any posts regarding solutions (weblogic.properties
settings) which I could try and use.
We are currently using weblogic 4.0.3 on AIX 4.3 with Oracle 8.i. No
native performance pack for that release. Will upgrading to 4.5.1
increase performance dramatically? Our application is very database
dependent. We use a the weblogic connection pool using Oracle's jdbc
thin driver. Note Oracle's OCI driver has numerous bugs related to CLOB
and BLOB retrieval which are used heavily in our database.
Thanks,
Don DeLuca

Hi Don,
I can't comment on the public posting of the Capacity Planning document.
However, I can say that there is no magic formula for optimizing your
WebLogic application. The biggest things to look at are the application
design and code (e.g., unnecessary synchronization code), DBMS configuration
and database design, JVM heap size (bigger is not always better), number of
execute threads (more is not always better), number of database connections
in the pool, whether or not you are using the performance pack, how much
other activity is happening on the server machine, etc. I can tell you that
trying to simulate a large number of clients from a single JVM client (using
lots of threads) will lead you to believe that the server is having problems
when it is really the client software/hardware that is often the limiting
factor. In many of our large benchmarks, we end up using significantly more
hardware for driving the clients than for running the server(s).
Sorry I don't have any better answers for you,
Robert
Don DeLuca wrote:
I've seen numerous references to a "Performance Tuning Guide" Is there
any way this document could be posted on the weblogic customer
downloads.
We desperately need this information. Even with working with Support so
far the process has been trial and error. Try this, then try that. I've
burnt many days just playing around with the properties and so far no
luck.
I've read just about every post in the performance newsgroup. Some seem
to be the same types of problems we are currently facing. Great
response when there are about 50 users. Horrible around 65. Slowness
doesn't seem to be gradual. All of a sudden it starts to crawl. So far
I haven't seen any posts regarding solutions (weblogic.properties
settings) which I could try and use.
We are currently using weblogic 4.0.3 on AIX 4.3 with Oracle 8.i. No
native performance pack for that release. Will upgrading to 4.5.1
increase performance dramatically? Our application is very database
dependent. We use a the weblogic connection pool using Oracle's jdbc
thin driver. Note Oracle's OCI driver has numerous bugs related to CLOB
and BLOB retrieval which are used heavily in our database.
Thanks,
Don DeLuca

Mvt type 311 posting - automatic dummy printout needs to be disabled

Hello Friends,
We have a custom program to post transfer postings. whenever 311 type GR documents are created , a dummpy printout occurs in the printer ( printer configures in user's profile ) .
I am not able to find the corresponding form associated with this. also , I need to deactivate this.
Please guide with some clues.
I tried searching the posts , Many are similar to my problem - but none of them solved my issue.
thanks
Raghu V

Hello Ramakrishna,
thanks for your inputs.
i have checked OMB5 - option 1 is marked for 311 movt. type . i guess removing this might stop trigerring the printout for all 311 movt. types .
but my question here is how to find which form is getting triggered ? because it contain junnk data and emptyr values in the printout.
also , In transaction : OMLV , i see that print code assigned is 02 for movt. type 311. whats the significance of this ?
many thanks,
Raghu V

Reader API Help Guide Needed

Hi Im using the free Acrobat reader within my application for viewing PDF files only.
Its the same that gets displayed in a browser and is activated as an activeX control.
It actually runs out of process as AcroRD32.exe
This has an API and quite a bit is intuitive but part of it is not.
Is these a help guide for using this API within your apps or scripts?
I need to try a switch a few things off etc and attempt to scale the view relative to my app.
Thanks.

You can find documentation about the API in the Acrobat SDK.

BB 957 - Handheld user guide needed

I have purchased BB RIM R957M-2-5 as a PDA and need a user guide. Thank you BuzzBrad.

Hi BuzzBrad,
Welcome aboard to BlackBerry support forums.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Opera 12 Migration Guide Needed

The great Opera 12 Migration has begun 8(
We are sad, mad & need all the help we can get...
I & many others view google as spyware.
I'm not a apple fan neither - former mac user
We need a Opera Migration Guide.
A lot of the web tools I need are already in place like Web Developer Toolbar & FF Developer Tools!
Need to figure a simple way to export Contacts & Mail from Opera's M2 Mail to SeaMonkey, Simple Mail or better lightweight e-Mail client.
I could do many cool things in Opera that have not figured out yet in FF.
"Content Blocker" would still work even if JavaScript was OFF - Great for Web Dev ;)
In hotmail I could view the Source Code of Spam Message w/out even opening the junk. I use this technique to see what I needed to block from the headers & body.
I still like IRC - must have for the Leo Laporte - Tech Guy Radio Show!
Still Need: Window Size in Title Bar, Page Zoom Controls, Small Screen (Very Basic Mobile View), Check Box Controls on Toolbar, Author/User Modes, Easy Proxy On/Off - I use a Check Box Control on Toolbar!
& More I've missed...

For IRC you can use the [https://addons.mozilla.org/en-US/firefox/addon/chatzilla/ Chatzilla] addon.

Linksys buyer's guide needed

Is there somewhere a buyer's guide for linksyst routers, where it would be possible to find a router which fits my needs?.
A kind of feature search, which could help to find a router with for example:
wireless n-mode,
removable antenna,
wireless broadcast on/off
third party firmware possible
etc...
Message Edited by ax21 on 08-24-2008 12:01 PM

ax21 wrote:
Is there somewhere a buyer's guide for linksyst routers, where it would be possible to find a router which fits my needs?.
A kind of feature search, which could help to find a router with for example:
wireless n-mode,
removable antenna,
wireless broadcast on/off
third party firmware possible
etc...
Message Edited by ax21 on 08-24-2008 12:01 PM
Linksys will not tell you which ones are 3rd party firmware compatible! They don't really want you to utilize 3rd party firmware...
A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost!

Not familiar with wiki etiquette, Beginner's Guide needs to be changed

Hello everyone,
I am an Arch newbie and did my first Arch installation successfully last night.
During the installation, a problem occured in chapter Configure the network of the Beginner's Guide. When executing
# systemctl start dhcpcd
the system refuses to do it, it complains it is in a chrooted environment and ignores the command. Consequently, I didn't have an internet connection after the reboot, but executing this piece of code again in my "real" system quickly solved the problem.
Since Arch is a community effort and I'd like to give back, even if it's just small things as a newbie, I'd like to help improve the Wiki, but I am not sure about its etiquette after going through the Help:Editing as it has a rather technical nature, but not the policies.
Is it ok for me to make direct editions to the Beginner's Guide?
If yes, should I just add a note along the lines "repeat this command in case you get the error..."? Or what do you suggest to have a streamlined style of writing?
Thanks for any feedback.

parcival wrote:
Hello everyone,
I am an Arch newbie and did my first Arch installation successfully last night.
During the installation, a problem occured in chapter Configure the network of the Beginner's Guide. When executing
# systemctl start dhcpcd
the system refuses to do it, it complains it is in a chrooted environment and ignores the command. Consequently, I didn't have an internet connection after the reboot, but executing this piece of code again in my "real" system quickly solved the problem.
Since Arch is a community effort and I'd like to give back, even if it's just small things as a newbie, I'd like to help improve the Wiki, but I am not sure about its etiquette after going through the Help:Editing as it has a rather technical nature, but not the policies.
Is it ok for me to make direct editions to the Beginner's Guide?
If yes, should I just add a note along the lines "repeat this command in case you get the error..."? Or what do you suggest to have a streamlined style of writing?
Thanks for any feedback.
I am no expert, but in order to install arch, u need an internet connection already before the install process. And after the chroot, that connection will not change; the "systemctl start dhcpcd command" therefore is in my opinion not necessary.
It makes sense to run "systemctl enable dhcpcd" after the chroot to start the internet connection during the next reboot. (That's probably also what u want to do; else u need to run the start command everytime u reboot your system)
PS: Welcome to the "Arch Family"
Last edited by tumas (2013-02-28 10:22:08)

Andy's Guides - Need help!!

Okay,
So, I have a 16:9 project and need to use Andy's guides to show me center cut (4:3) straight in the center. For some reason, I only see the options "4:3" or "14:9". I'm assuming the "14:9" is center cut, but want to verify.
Thanks!

Ryan,
If you need 4:3 guides then choose 4:3 (not 14:9) from the popup. The Crop Safe guide will then indicate the region that will be cropped if and when you create your center cut version. Use the Actions Safe and Title Safe guides to ensure that your Center Cut version will comply with broadcast recommendations.
Cheers
Andy

Official Arch Linux Install Guide needs edit

Aloha,
This line in the Official Arch Linux Install Guide
Official Arch Linux Install Guide
dd if=archlinux-XXX.img of=/dev/sdX
Needs to be changed too
dd if=archlinux-2010.05-{core|netinstall}-{i686|x86_64|dual}.iso of=/dev/sdx
Mahalo

Hum, well I don't know how to write a git patch. I guess it would be a good thing to learn though, but I have to go to bed now.
Hum..., after further looking at the this forums section I guess I posted in a totally wrong place Live and learn.
Last edited by hunterthomson (2010-05-26 13:16:47)

Step by Step Guide needed for external drives.... Help!

I know this has probably been done to death already but I can't seem to make any of the suggestions work in this case. I guess what I need is someone to tell me like I'm a 5 year old on how to do this.
I want to move my music library to an external drive as my main drive is getting full. I have iTunes on my c: drive and want to move my music to an external drive (h:) so it can play and be stored there. I have tried a couple of times to move it and tell iTunes where to find it but for some reason a couple of things happen...
1. iTunes changes the location back to the c: drive, even after I have pointed it to a folder created on the external drive.
2. if it does look to the external drive it doesn't find the library... the music is there but iTunes doesn't display it in the library.
I must be doing something really wrong or this isn't possible... any advice would be a great help.

You might find this article useful: iLounge - Transferring your iTunes Library to Another Drive

Upgrading from 5 to 7. An Idiot's Guide needed

When I first got my Mac, it was just on the cusp of OSX. So it came loaded with OSX and OS9. The shop I got all the kit from set everything up on OS9 with Logic 5 working via OMS.
Now, this has worked fine (apart from a few lack of memory problems) but it's time to move on.
So, I upgraded to Tiger and I've bought the upgrade from Logic 5 (Big Box version) to Logic 7 pro.
Obviously I need more memory, although I'm not sure how much, but what are the practicalities to make sure it works when I first fire it up?
What happens to my old favorite VST's?
Virtual Guitarist, Groove Agent, Stylus,
My battered old Edirol Orchestral?
I write for TV regularly so I can't afford to have much down-time.
Please someone tell me it'll be OK....
Cheers
Rod

OMS was very popular for Mac OS 9 because it managed your MIDI ports and abstracted the software/MIDI relationship to where all we needed to know were the names of the ports, rather than port numbers and stuff like that.
Apple's CoreMIDI structure in Mac OS X is based on OMS (Doug Wyatt, the developer of OMS, works for Apple and has been the primary developer behind CoreMIDI).
If you are still planning to dual boot from OS9, you will use OMS there. However, as far as OS X goes, everything you need is built in and accessed from the Audio MIDI Setup utility.
jord

DUMMY GUIDE NEEDED

Similar Messages

Maybe you are looking for