Dummy house bank for France

Hi,
I have to create a Dummy House Bank for France. As bank account number and control key is required field, I tried to put any 11 digit number for Bank Account Number and 2 digit control key arbitrarily. But, I am getting an error message: "Bank control key and bank account number do not match"
I tried several combinations but failed.
I checked the help for control Key field and it says:
"Use Brazil, France, Spain, Portugal, and Italy:
This field contains a key for checking the combination of bank number and bank account number."
Kindly, help me to create a dummy house bank for France.
Quick reply will be appreciated.
Thanks & Regards

Thanks Neeraj.
I found a solution for it. It is because France is using IBAN, we'll not be able to put any arbitrary number.
Thanks for reply anyways... 

Similar Messages

  • House bank for respective payment method.

    Hi Gurus,
    I would like to consider house bank for payment method wise.  Please give proper answer.
    reg.

    Hi
    By adopting the following procedure, you can fulfil your need.
    SPRO > Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payment > Automatic Outgoing Payments > Payment Method/Bank selection for payment program > Assign Payment method to bank transactions.
    Give your respective company code, give your payment method and respective house bank. Then, system will consider that house bank while in APP time.
    Definitely above answer will solve your problem.
    Assign points without fail.
    ALL THE BEST

  • Two house banks for one vendor

    hi sapgurus,
    i have one question.
    i have 5 invoices of one vendor, i want to make payment thru 2 house banks
    for example
    3 invoice from hdfc house  bank
    2 invoice from icici house bank
    what is the configuration required for those scenerios.
    please reply with good answer.
    regards,
    sreekanth

    Sreekanth,
    First maintain the bank determination in APP config with house bank details in "Bank Accounts Tab" and available amounts with definite currencies.
    Then @ line item level, bank details have to be added in FB60.
    Otherwise the system will throw an error.  So, first maintain the APP settings and make changes @ line item level.
    Hope this will help.
    Vinay

  • House Bank for ACH transmission

    Hi,
    I have been setting up ACH processing for making payments to our vendors.We have bank key or ABA number or routing number for checks which has been updated in the config.FI12 field Bank key.Now for ACH processing bank is using  different routing number, DO I need to create another house bank for ACH or is there nayway I could use the same house bank which we already using for checks.Thanks
    Regards
    Shaun

    If it is the same bank, you do not need to create a seperate house bank. In FI12, choose the house bank and at the bottom click to expend 'Data exchange'. You need to populate 'Bank receiving DME' and 'Company number' fields. I believe 'Bank receiving DME' is that another routing number your bank is talking about. You can test it to see whether it shows in the right place in ACH file.

  • F110 - Mass change house bank for one time vendor

    Hello,
    Is it possible to make mass changes for payment program for one-time vendors? I would like to change bank account from where do I want to pay something to one-time vendor. As far as I know, it isn't possible to change it that way, it is possible only one per one.
    Does anyone have Idea how to resolve this issue?
    Thank you in advance!

    I can do it but one per one in payment proposal. I can't do it mass. The issue is that I have huge number of one time vendor payments per day and some of them should be paid in one house bank and some of them in some other house bank.
    I tried to change it with FBL1N but I couldn't do it.

  • House bank for a vendor

    Hello,
    If I enter a payment term in the master data of a vendor it appears in every document I create in FB60 transaction, but if I enter a house bank in the master data of that vendor it does not appear in the documents I create in FB60.
    Is it correct? Could I customize the system to display the house bank in the documents???
    Thank you very much in advance

    I want to have in fb60 my company house bank (HBKID field)because if I the system does not take it automatically from the vendor master data I have to select it in each document I register in FB60 and I always pay this vendor with this bank.
    If I have the possibility to introduce the information in the vendor master data,  I think It could be possible to display it in FB60.
    For example, If I select a payment term in the vendor master data it appears in fb60.
    Thank you

  • House Bank for Vendor

    Dear FI experts,
    My client need that No of House Banks are assigned for one vendor . Is it possible to make that assignment
    If possible pl give me the solution.
    Venkata Raju Khottari

    Dear raju 
    For each vendor, you can specify as many banks as you require.To pay a vendor by bank
    transfer using the payment program, you must enter the vendor's bank country, bank key, and bank account number) in the vendor master record. For control purposes, the system then displays the bank name data
    When you enter your vendor's bank address, the system checks whether master data alreadyexists for this bank. If not, the system goes to the maintenance screen for bank master data.
    To change or add to bank master data, place the cursor on the required bank and choose Environment   Bank data. The system displays a window for entering and maintaining master data.
    You can enter payment methods in the payment transactions screen for company code data.Each payment method is represented by a single letter or number.
    are u clear
    thanks
    raju
    helps ..  please assign points

  • Choose a house bank from Varinet for automatic payment

    HI Gurus,
    I am using multiple bank accounts. I have Ranking order defined for all those House bank and account ID's in FBZP. Also I have defined available amount as 999999999 for all those house banks and account ID's. Now I have below scenario.
    I have CIti Bank as ranked one in FBZP. I have a House bank of ICICI bank maintained in Vendor account. But I want to pay from SBI bank which I will maintain in my variant of Automatic payment program.
    Is there any way where I can overwrite the ranking and House bank maintained in Vendor master record to choose my own House bank for a payment run?
    Thanks in advance....
    Abhi.

    Hi,
    Here is the priority used for house bank selection in the same order.
    1. Document line item
    2. Vendor master data
    3. Bank Determination - Ranking order (FBZP settings)
    4. Edit proposal you can overwrite the house bank selected automatically
       by F110.
    In case none of these satisfy your requirements, you can implement BTE 0001810
    You could use the business transaction event (BTE) 00001810 to select the house bank via your own logic.
    (Please read the documentation of function module SAMPLE_PROCESS_00001810 how to implement such a BTE.)
    Hope this information helps.
    Kind Regards
    Soumya

  • Checks for new house bank

    Hello all,
    When configuring a new house bank for Accounts payable. Do you need to configure checks as well. This house bank will have 2 payment methods.
    1. For ACH
    2. For checks.
    Do I need to do any configuration to Checks and attach it to new house bank? If yes where do i do that.
    Thanks.
    Also, can somewhere please tell me all the steps for creating a new house bank just to double check my configuration.
    Thanks

    Hi
    New house bank can be defined thru FI01 & FI12
    Check related settings have to be done in FBZP if ur going to use automatic printing from system
    Thank You,

  • G/L accounts in House Bank

    I am confused. When we get EBS, which G/L account it updates. Because the G/L account (in House Banks)  for bank accounts and the G/L sub-account in bank determination are the same so how does the EBS update the main Bank balance.
    Do the G/L account number and g/l sub-account number have to be different? Please explain me understand. If possible please provide example
    Thanks

    Hi,
    Main GL account is used in the house bank.
    We use the sub bank account in case of automatic payment program. When we run APP system first post all the entries to that sub account. Basically this account is for clearing purposes.
    And when bank sends the payment confirmation to the client via EDI than system automatically knock off the same entries from the sub account which are there in bank statement and transfer that amount to the main bank account.
    This is a very useful feature provided by SAP , as there is no need of manual reconciliation of banks. With the help of sub ledger account the system does the reconciliation automatically.
    Hope this will give you clarity.
    Regards,
    Nitin Aggarwal
    Please assign points if helpful.

  • Check payment house bank

    User has done the payment sbi bank
    while updtion fch5 user has mistake  update with wrong house bank id and account id.How to control other house bank for particular bank in fchi
    please help me on this

    Hi Expert,
    If the Check is updated to the document with the T-Code: FCH6 - Manual Updation of Check En-cashment Date.
    Then do the below Steps:
    Step-1: Define Void Reasons in T-Code: FCHV
    Step-2: Reset Check Data(i.e., Deletion of En-cashment Date) in T-Code: FCHG
    Step-3: Issued Check Cancellation in T-Code: FCH8
    Step-4: Check Register in T-Code: FCHN
    Regards,
    GK
    SAP

  • Wrong House Bank in Payment proposal of AAP?

    Hello Experts,
    We have more than 20 business areas and we have created individual house bank for every business area.
    In one of our Business area,when they are running AAP for a vendor to make payment(payment method-T),the Corporate house bank is coming as default in the payment proposal.
    I have configured every pair of house bank and business area in the ranking order of "Bank determination" configuration.
    Please suggest how can i change the house bank in the payment proposal?
    Regards,
    Sumeya Offrin

    Hi,
    Please follow the below steps to reverse a posting APP entry:
    1. Reverse and reset open item in T.Code FBRA
    2. Delete the existing payment (F110 u2013 Menu u2013 edit u2013 select payment run Delete)
    3. Delete the proposal (F110 u2013 Menu u2013 edit u2013 select proposal run Delete)
    4. Delete the parameter (F110 u2013 Menu u2013 edit u2013 select proposal run Delete). This is optional.
    Now you can either re-run the existing APP run or create a new one.
    Regards,
    Kiron Kumar T.

  • House Bank Determination in FPY1

    Hi Sap Gurus,
    I have a question about the Payment Run in Contract Accounting.
    I am looking for a customized solution (defined Rules) to determinate the own House Bank based on the Business Partner Bank Country insteadt of the Ranking in FPY1,that means if the BP has a  BankAccount in the Netherlands and its linked to Contract Account, the House bank for our payment Run/Refund should be our Netherland Bank. This should take place in one Payment Run, because its all done by one paying company code. The House Bank Determination should be Business Partner driven.
    I assume this will be done in the FI-CA Event 650, but is there another way to determinate the own Housebanks by Customizing in FI-CA.
    We are not using Inhouse Cash. 
    I will assign the points if someone has a helpful answer.
    Thanks

    Hello,
    There is no standard config to suit your requirement. You  are right in assuming that Event 650 needs to be enchanced.
    You need to overwrite FKK_SAMPLE_0650 with your code and attach it in FQEVENTS.
    Hope this helps
    Rgds
    Rajendra

  • How to update house bank in vendor master

    Dear Experts,
    Please suggest me how to update the house banks in vendor master?  and RTGS no. and IFSC code
    If i am having thousands of vendor  do i need to create thousands house banks?
    Regards
    chandu

    Hi Chandu,
    There is no need for you to create house banks for vendors, You need to directly do the assignment in the vendor master. You can run LSMW for updating all the vendors using XK02 (Change of Vendor Master) in that Bank Details.
    Coming to RTGS and IFSC code, there are no specific fields available for these two as they are only useful in INDIAN SCENARIO, you can use Bank Number field for updating either of RTGS or IFSC code and you need to decide to use another field which is not used by your client for updating the second one.
    Decide which fields are not used and update these RTGS and IFSC code in those.
    Hope u understood.
    Regards
    Srikanth

  • House Bank Creation-F110 APP

    Hi,
    I have created one house bank for one bank and different Account IDS for each bank account that is Current and CC account.
    In FBZP transaction code, system is not allowing to enter the same house bank number more than once, in which case all the accounts cannot be entered, since the sub GL account is different for each bank account.
    In F110, though I maintain variant for each run, ie House Bank and Account ID,
    system does not make payment from that house bank and the payment is made from different house bank and ID, thereby debiting different GL account.
    Could any of you, advise what could be the missing link?
    Can I do F110 run, with the same house bank number for different accounts
    Thanks
    Uma

    hi
    you have more than 1 accounts in a house bank. i.e a current account and other over draft account .. e.t.c
    as you have created one house bank and want to use the both the accounts in that for your APP.
    for that you have to create account id for each account in that house bank. and bank key for each bank.
    for posting the accounts to the correct account through APP you can give the GL account for the combination of House bank, AccountID . which would definetly be unique.
    EX::
    u have bank ABC
    and u have account 1 and 2 in the above bank
    u should create ABC as house bank
    then u create bank key for account 1 and account 2
    then in house bank ABC u create 2 differnt acccount id for each account 1 and 2 and assign the bank key created above
    in next step u give GL account for combination of ABC and 1 , ABC and 2
    reward points if u r problem is sovled
    thanks and regards
    gkk

Maybe you are looking for