Dump after creating new header text on sales order and invoice.

Hello,
We have created one header text on sales order and the same text for invoices, on VOTXN customizing.
Testing the new text, system let us save the text fine, but later, if we display the text, system give us dump error.
My question is, after transport the customizing to the next environment, is necessary run a standard program. Since VOTXN, we have generated the new access created, but dump appear displaying text header tab.
Any help on this?
Thanks in advance

Hello Customer master table man
1) Did you review the dump analysis- ST22?  Do that because the dump amy or may not be related to the Text config changes.
2) You are also mentioning about transporting?  Did you already transport and are facing this issue in the target client or is it happening in the source client and you want to avoid it in the target? OSS note 1117467 throws light on transporting issues.
Review the following OSS notes:
548615 - FAQ: Text determination in SD II
548517 - FAQ: Text determination in SD I
1117467 - Text Customizing change not transferred in target system II
970153 - Change to Customizing text not transferred to target system
Hope this helps.

Similar Messages

  • Create the Header Text In Sales Order Header

    Hi All,
    I want to create a new header text in the sales order header level, Would you mind give me some manual to create this ?
    Regards,
    Luke

    Hi Luke,
    Please goto T-code VOTXN->Sales Document->Header->Text object     VBBK
    You could create Text ID and access sequence.
    Assign the access sequence to text ID.
    Assign the text ID to the procedure.
    Assign the procedure to sales order type.
    Please also refer the following online documentation:
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f993545a11d1a7020000e829fd11/frameset.htm
    Hope it helps.
    Regards,
    Smile
    Edited by: Smile Zhang on Jul 3, 2008 7:22 AM

  • HEADER TEXT OF SALES ORDERS

    WHERE CAN I SEE THE PARAMETERS VALUES IN  "READ_TEXT "   FM
    OBJECT
    ID
    NAME
    LANGU
    SUPPOSE I WANT TO READ THE HEADER TEXT FOR SALES ORDER. IAM USING 4.7 IDES.

    hi  ,
    its easy to find where the the parameters are stored.
    Just right click on the parameter  and click on Technical information to see the table name..
    this is applicable for all.
    Siva

  • How to create Sales order and Invoice in Foreign Currency

    Dear All,
    What are the procedures I have to do to create the sale order and Invoice in Foreign currency.
    Is it enough if I maintain the currency in the Customer Master and Excahge rate OBBS.
    or
    We have to do someting in the Sales order (Change the currency document header level)?
    Kindly explain.
    Regards,
    Mullairaja

    Dear Mullairaja
    Under customer master you can maintain currency eg. usd, eur etc. that will do.. (hope you have maintain diift. Dist. Channel for Export sales and maintain Recon A/c for export revenue.) This will copy to Sales order.
    Under t.code OB08 we maintain the Currency Exchange Rates which will help for copying control.
    Under Displaying Billing document - Accounting -  you can click on Display Currency Tab,  here you will understand the rate conversion  i.e from USD to INR.
    Thanks & Regards
    Hrishikesh K

  • Creation of u201CHeader Textu201D in sales Order and Invoice

    Dear friends,
            Can any one guide me the complete configuration settings that are required for creation of u201CHeader Textu201D in sales Order and Invoice. Please help me to overcome this issue.
    Regards,
    Bhanu.

    Hello Bhanu...
    Hope you are aware of the configurations you need to maintain for the Text determination.Anyway, herewith are the steps that may help you to accomplish your requirement.
    Text Determination procedure for sales document header:
    Text can be determined at sales document header level or it can be imported from customer master. The process is...
    Define Text types:Path: Imgsales and distributionbasic functionstext controldefine text types
    Select sales document header. Click on text types go to new entries and define text types. For Eg:Z1
    Define Access sequence:
    Select sales document header
    Click on change icon
    Click on access sequence control button under dialog structure
    Go to new entries and define access sequence number with description.Ex: 55
    Save it and exit
    Define text determination procedure:
    Go to new entries
    Define text determination procedure.Ex: ZX save it and exit
    Assign text id's to text determination procedure:
    Select your text determination procedure(ZX)
    click on text id's in text procedure control button under dialog structure
    go to new entries and maintain entries. Text id:assign text id (Z1) that we defined in the previous step
    Specify sequence No-10
    Check Reference: this indicator specify that the text is reference or copies from preceding object
    Text in obligatory: text will be displayed during copying. the value of this field specifies whether text is obligatory or not and if it is obligatory the how it is to be displayed
    Apart from this... you also have to maintain the text in the Customer master as mentioned in the previous mail..
    For this you have to maintain the customer text.Do the following steps.
    1. Go to Customer master, Choose from the Menu Extras --> Text and mention the text
    2. Then in a sales order automatically wehn you are entering that sold to party..the header message will be appearing..
    In a nutshell i would request you to check weather you have maintained the Sales-Customer text KNVV and also that you have maintained all the required customizing settings for the text procedure, access sequence etc were completed....?
    Also make sure that the text type is also inclueded in the text determination procedure of the sales document header...
    Note: If all the settings of text determination exists and still if the text is not appearing then In sales document Header Text procedure, select sales header procedure, then select Texts in procedure. Check for the Header note, No. box is checked. This check mark ensures text is to be displayed when it is copied..
    Its should be working if all the requried setting are made....
    Reward if this helps..
    Thanks,
    Safeer Rahman

  • Importing Sales orders and Invoices thru DTW

    Hi every one,
    I am facing a unique problem when using DTW to import sales orders and invoices through DTW.
    I am using the two templates- Documents and Document Lines. But the imported Invoice or the sales order(In both cases) the dicount field in the row is taking a negetive discount value. Let me elaborate....
    1. I am taking a BP which has been alloted a Particular pricelistcode in the BP Master.( say it be Purchase price).
    2. Now In the Doc_lines Template I have put the value in the price column- (eg. Rs. 500).
    3. Now the itemcode used in the template is already having a masters and the prices are also defined in SAP B1. Say the Purchase price defined for the item is Rs.400
    4.When I am importing the order/nvoice then the discount field in the row automatically takes a value of -25%, the unit price has the value Rs.400 and the Total Field shows Rs.500.
    ( this Implies that the price I have suggested to Import i.e. Rs500 is some how not taken by the system. The system takes the price defined for the BP and then adjusts it with the price suggested by the user during import) So a negetive discount is taken.
    On the other hand if the same procedure is followed for an item where the prices are not updated in the master data then there is no such problem. the unit price field reflects the price which is given in yhe template.
    please suggest a way to get out of this problem.

    Hi Debraj,
    Try the following..
    In Admin > System init > Document Settings > General Tab ..Calculate the Row total using Unit price ....... leave this  unchecked
    Also, at the Document_lines template fill the discount column with 0
    Suda

  • Report to list manual changes to conditions in sales orders and invoices

    Hi experts,
    Is there a Standard Report to list the manual changes of pricing conditions in sales orders and invoices?
    Should be a selection on the field KONV-KMPRS.
    Please advice.
    Rgds,
    Pri

    Hi priya,
    In the Sales Order,Select Environment and then Changes to See all Changes made.
    Follow the Same procdure for Invoice also.
    There is no Standard report as such to see the changes.
    Thanks,
    Neelima.

  • Hide the cost and margin fields on Sales Orders and Invoices

    Hi all,
    I need to hide the cost and margin fields in Sales Orders and Invoices. We sell our products to our employees sometimes, hence we don't want them to know cost and margin information.
    Can this be done?
    Cheers

    Go to VOV7 & as per the Item category ,de - select the Check Box Determine Cost.
    Else remove the Condition Type VPRS & Margin Condition type from the Pricing Procedure
    Best Regards,
    Ankur

  • Apply different exchange rate types in sales order and invoice

    Dear Experts,
    How to configure different  exchagnes in sales order and invoice?
    For example, use average exchange rate in sales order but current exchange rate in invoice.
    Thanks!
    Regards,
    Wang Hui

    Hi all,
    I also need to apply different exchange rate between sales order and Invoice.
    E.g:
    condition type currency (komv-waers)          sales document currency (komk-waerk)         company currency (t001-waers)
    In my example, each of above currencies can be different:
    komv-waers = EUR
    komk-waerk = USD
    t001-waers = GBP
    I tried through VTFL transaction but it is not working in all situations cause VTFL allows me to manage situations where
    komk-waerk NE T001-waers
    But I need to convert condition types where
    komk-waerk EQ T001-waers but
    komv-waers NE komk-waerk
    Can I manage this situation through SAP standard and/or VTFL transaction?
    Is there any other solution?
    I really hope you can help me
    Thanks a lot
    Regards
    Andrea

  • Tables where header text of sale document and bill document is stored

    dear all,
                   i need a table and field in which header text of sale docu is stored .i need to print a text entered by user at the tie of vf01 .
    so plz tell me the table and way how to print that text in print of invoice
    if any function is there for that please also tell me
    waiting for positive response
    regards & thanks

    Take a look at OSS <a href="hhttps://service.sap.com/sap/support/notes/600408">Note 600408 - Smart Forms: header texts and item texts</a>, it may be useful for you
    <i>Symptom
    The system does not print header texts and item texts of the billing document in the Smart Form standard form LB_BIL_INVOICE.
    Other terms
    SMARTFORMS, print, text, completion note, invoice
    Solution
    The following solution describes how to include a 'header note' on header level and an 'item note' on item level in the form.
    If you want to insert other texts into your form, you must adjust the access key (text name, text object, text ID) which you create under point 4 or 11 correspondingly.
    The formatting characteristics of the text are transferred from the billing document to the output. That is, you can change the character format only in the document.
    to correct the form, proceed as follows:
          1. Display form LB_BIL_INVOICE in the change mode of Transaction SMARTFORMS.
          2. Expand the navigation tree on the left side and choose the following path: 'Pages and Windows -> FIRST -> MAIN'.
          3. After text node TITLEINVOICEDETAILS, insert text node HDTEXT with description 'Header text'.
          4. Maintain the general attributes of this node as follows:
              o Text Type: Include Text
              o Text Name:
              o Text Object: VBBK
              o Text ID: 0001
              o Language:
              o No error if no text exists: X
          5. Create the following variable under 'Global Definitions':
          Variable name                    Reference type
          GD_IT_TXT_KEY       TYPE         TDOBNAME
          6. Choose the following path: 'Pages and Windows -> FIRST -> MAIN -> TABLEITEM'. Expand the 'TABLEITEM' table node.
          7. Below the 'TABLEITEM' node (after node IT_REFVG2_COL2_A), insert program line node ITEM_TEXT_KEY with description 'Key for item text'.
          8. Maintain the following parameters for the node:
              o Input parameter: GS_IT_GEN
              o Output parameter: GD_IT_TXT_KEY
          9. Insert the following program lines:
                        clear gd_it_txt_key.
    move gs_it_gen-bil_number to gd_it_txt_key.
    move gs_it_gen-itm_number to gd_it_txt_key+10.
          10. After the new program line node ITEM_TEXT_KEY, insert text node ITEM_TEXT with description 'Item text'.
          11. Maintain the following general attributes of the node:
              o Text Type: Include Text
              o Text Name:
              o Text Object: VBBP
              o Text ID: 0002
              o Language:
              o No error if no text exists: X
          12. Make the following settings under 'Output Options':
              o New Line: X
              o Line Type: IT_DESC
              o New Cell: X,    1 Skip Cells
          13. Activate your form.</i>
    Regards

  • Transfer of Header text from Sales Order to Delivery

    Hi Experts,
    I had a requirement to populate Terms of delivery text in Sales Order Header text with some predefined value which I have accomplished using MV45AFZB - User Exit USEREXIT_CHECK_VBAP which transfers the text on save of the document to sales order header (terms of Delivery Text ) .
    Now the issue is the same text is required to be copied to delivery - Terms of Delivery header Text. But this is not happening/Its occuring one out of 4 times . I am not able to find out the reason for this.
    Please help in this regard.
    Thanks

    This can be set in conifugration. Transaction VOTXN. The delivery header text can be set to be referenced from the sales order.

  • Text copy from customer master to Sales order and invoice

    Dear friends,
    when i maintain the text in the customer master ther needs to copy to sales order and from sales order to invoice.
    Can you please guide me how to do this config
    Thanks
    Raju.

    Dear Raju,
    First you need to do the Text determination for all areas(i.e Customer Sales and distribution,Sales order header,delivery header and billing header) through VOTXN transaction.
    -->Create the Customer text ID under Object KNVV
    Maintain the text for Text ID in the customer master >sales area data>Extras-> Text
    To copy the customer text to the sales order you need to keep KNVV table as Text object in the sales order text access sequence for the text ID.
    If you want to copy the sales order header text to the invoice header first you need to copy the sales order header text to the delivery header from delivery you can copy to invoice.
    When you want to copy the Text from Sales order to delivery the Access sequence will place a role
    If you want to copy the sales order text to the delivery document The Text Object should be VBBK in the delivery Header Text determination access sequence for that Text ID
    Again you can copy the text from delivery to Billing document through checking the Delivery Text field in the billing document detail screen (Top most bottom of the screen).
    Go to VOFA transaction select your billing document type then go in to the details here you can find the Delivery Text field you just check that check box.
    Now system will copy the sales order header text to the delivery header then it will copy to the invoice header.
    I hope this will help you,
    Regards,
    Murali.

  • Copy Texts from sales Orders to invoices

    Hi,
    someone can help me?
    the additional texts of old invoices (related to sales order #1) are changed when I change the additional texts of the order where they come from (sales order #1)
    I don't want this changes in the old invoices created before changing the additional texts in sales order.
    Thanks,
    Antonio.

    Hi Ravi,
    First at all thanks for answering.
    According to your answer I understand that every time I modified the sales order I'd have to launch a program to maintain the texts in the old invoices, isn't it?
    Thanks again!
    Antonio.

  • Regarding creating a LOOSE LINK between Sales Order and Vehicle

    Hi,
    Does anyone has any idea on how to establish a LOOSE LINK between Sales Order and Vehicle using BAPI_VEHICLE_CREATE or any other Function module.
    Any help will be highly appreciated and rewarded.
    Kind Regards,
    Tanuja

    Dear Kumar,
    Strategy - 40
    Consumption of PIR (not Redution)
    1) the first point in strategy in 40 is, incoming sales order consumes PIR
    2 )both sales order and PIR takes place in MRP planning run
    2) this is where it is in mostly used in many indutries
    just a small example how this strategy works
    1) creat PIR for ur FERT- 100Nos
    2) check in MD04- u will get PIR (VSF) as 100
    3) now creat sales order for 120 for same month
    4 )run MRP for that particular FERT
    5) check the result in MD04, here ur PIR gets vanishied and an plan order will be generated for 120 Nos.
    Regards
    kumar
    Edited by: kumar kumar on Jul 22, 2009 8:29 AM

  • New Report for Opens Sales order and P.O from Plant and S.Loc

    Dear Gurus
    We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
    If you have already developed this kiond of report help me inthis case.
    Thanks
    ramki

    closed

Maybe you are looking for