Dump ASSIGN_TYPE_ILLEGAL_CAST in SAPLSDSD for 1 user, not for others

In a Unicode ECC 6.0 system (SAP_BASIS = SAPKB70013 and SAP_APPL = SAPKH60011) a user clicks the search help for a customer number field (Data Element = KUNNR) and the search help screen pops up. This search help popup opens on the Customers (general) tab.
Now without making any change in any field on this tab, the user clicks any other tabname and this results in a dump: ASSIGN_TYPE_ILLEGAL_CAST in ABAP program SAPLSD.
An other user and myself have tried to replicate this in the same system. We do not get the dump.
When I logon with the userid of the first user and debug, I can click whatever tab I want and it does not dump. As soon as I disable all breakpoints and press F8 (continue) I get the dump.
Anyone has a good hint?
Thanks.
Ger

This dump appears in program SAPLSDSD in include LSDSDF11 in routine PERSONAL_VALUES_CONVERT.
The dump indicates that the problematic statement is this:
ASSIGN align2-c(s_descr-intlen) TO <tmps> TYPE s_descr-inttype.
The field ALIGN2-C is defined as 255 type X
The field S_DESCR-INTLEN has the value 25.
The field S_DESCR-INTTYPE has the value 'C'.
So the program tries to assign 25 bytes of a hex field into a character type field symbol. In non-unicode this works, but is not accepted in unicode. This I can understand.
But why does it go to this routine for one user and not for 2 other users?
And why does it not go to this routine when the first user is running in debugging?
Edited by: Ger Hemmes on Mar 20, 2009 11:10 AM

Similar Messages

Custom Concurrent Program works under one user, not the other

Hi,
We created a custom concurrent program in our 12.1 Windows EBS environment. This is a "host" concurrent program which executes a cmd file on the host.
Using user A with responsibility X this program runs OK. Using user B with the same responsibilty X it does nothing. Request finishes completed, but it does nothing.
With user B, if I remove the .exe from the %XX_TOP%\bin directory it ends in error. When I remove the .cmd from %XX_TOP%\bin it ends completed succesfully.
User A and B have the same user preferences and the same profile option values at the user level.
Can someone tell me what more to check to solve this problem?
Thanks, Marco

No the concurrent program is not user-dependent. It starts with copying a file from one directory to another and then starting a sqlloader process. But even if I only put an echo in the cmd file, it is not started when executing with user B. The concurrent request logfile is empty (besides the usual lines about program name,start/stop timestamps, printing info,etc. in it).
I run the concurrent program under the same responsibility for both users.

Error Message For BISystemUser: User not authenticated

We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
nqserver.log:
...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
In oracle support we found such issue (Doc ID 1308389.1):
OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
Getting error: Unable to Sign in. invalid username or password was entered
Changes: Changed repository, deleted BISystemuser, added the user back
Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
It seem to be funny for PROD environment. How we cam resolve this problem?

Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
If that's the case you need to change the bisystemuser password to something known and update the credential store password.
Another possibility might just be that you need to regenerate the GUIDs:
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

CS2 Works for one user, not for another

A friend has started getting the dreded "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I've found this problem listed a number of times in the forums, but none of them seem to have a solution.
He is on a Window 7Pro machine running 64-bit.
Reinstalling does not fix the problem and customer support will no longer help with a CS2 application.
He has compared the C:\Users\Username\AppData folders between the primary user and the others, but not clear which folder he should delete. Most reference a specific applicaiton (like InDesign, Illustrator, PhotoShop, etc) and this problem happens for every CS2 app.
He's considering backing up the whole disk, then delete the user's profile, and then re-create it, and then put back the documents, email, contacts, bookmarks, etc. That's a fair amount of trouble, but it should work.
Can anyone suggest an easier way?

Sorry, but even that is not guaranteed to work. CS2 is unsupported under Windows 7 and using it on a 64 bit machine adds a whole new level of complexity. It's time for your friend to upgrade. Troubleshooting this installation will be nothing but an excercise in futility.
It's also worth noting that CS2 is the earliest version eligible for upgrade pricing. You can save a few bucks along with free shipping on Amazon: http://amzn.to/h0SwTa
Your (and your friend's) call of course. But if really wants to stick with CS2 he should roll back to XP SP2. Anything later than that is a crapshoot.
Bob

Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

User not authorized for message processing

Hi,
I have a SM59 connection from SAP PI --> SAP R3.
Targethost sapr3T.mydomain.
Path prefix: /sap/xi/engine?type=entry
Process: From PI send a message to R3 (scenarie is a Server Proxy...)
User: PIPROXY has Role SAP_XI_APPL_SERV_USER
This is not enought I get error "User not authorized for message processing" when trying the connection from my PI server. (I tried with SAP_ALL and then it works)
What would be the right user role for this operation ?
Br,
Martin

Hi all,
I have the same problem in a XI -> BW scenario (Abap proxy).
I get error "User not authorized for message processing" when try to send message from PI to BW.
(I tried with SAP_ALL and then it works)
User: PI1REMOTE has Role SAP_XI_APPL_SERV_USER and SAP_XI_IS_SERV_USER
What would be the right user role for this operation ?
Thanks
Daniele

Simple report for lock users not actives in last 30 days ?

Hi, we need code in SE38 simple report for lock all users not actives in last 30 days.
This sample is good but need check : user its inactive in last 30 days.
http://www.sap-basis-abap.com/abap019.htm
Thank you.

You do not need a report to do this. The instance parameter
login/password_max_idle_productive
will do this for you.
Cheers
Graham Robbo

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

Importing CDs into iTunes - User Not Registered For Online Use

I am on Windows 8.1 Pro using iTunes 12.0.1.26 and am trying import CDs into my iTunes library. When I insert a music CD in the album information and track names don't come in automatically. When I try to manually get the information, I get an "User not registered for online use" message.
Request if I can be provided with some assistance on this. Importing CDs was no problem until I updated to iTunes 12.0.1.26 yesterday morning.
Thanks.

Same issue - windows 7. Worked fine yesterday - updated to iTunes 12 and now it is broken and I get the "user not registered for online use" ERROR. Seems like the latest "upgrade" broke GraceNote access.

Itunes 12 track names not found and user not registered for online use

I recently downloaded itunes 12, and now when I try to import a CD the track names or CD information is not found.... So when I click on options to Get Track Names....it tells me user is not registered for online use... I am running windows 7.
I have tried un-installing and re-installing - didn't work.
I have tried removing a file and then have it repaired... didn't work.
Any other ideas on how to solve this problem?

You could try deleting the entire %appdata%/Apple Computer folder or look for parallel files/folders in the C:\Users\<User>\AppData\Local or C:\Users\<User>\AppData\LocalLow folders in case a corrupt file is persisting there.
Or it might not be the preference files after all...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

SubArea not visible for other users in ESS

Hi All,
I have created a new subarea (having few services) and assigned it to a Benefits and payments Area.
Now the issue is its only displaying to Administrator Role not for other users.
if iam giving SAP_ALL to other user then we are able to see this.
Please let me know if iam missing anything .
Thanks,
Santosh

to the role assigned to the user, you need to select end user visible in the role.
note Number              939412
ssign the following permissions to an End user.
   o Goto Content Administrator ->Portal content ->Content Provided by
      SAP ->End User Content -> Employee Self Service
   o Right click on Employee Self Service. select open-> Permissions
   o Assign read authorization to default user group "everyone".
   o Check the 'EndUser' checkbox
   o Save the Assigned permissions
   o Goto System administration -> Permissions.
                                                                Page 2
   o Goto Portal content ->Content Provided by SAP ->srvconfig
   o Assign read authorization to default user group "everyone".
   o Check the 'EndUser' checkbox
   o Save the Assigned permissions.

When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop. Media content (track names, etc.) do not load. Thanks

When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop. Media content (track names, etc.) do not load. Thanks

See Re: itunes 12 track names not found and user not registered for online use.
tt2

Create POWL query for specific user (not self)

Hello All,
was wondering if anyone had an idea on how to create a POWL query for a specific user. Even the low level method in class CL_POWL_QUERY_ACCESSOR seem to assume that you either are creating an administrator query for any/everyone or just for yourself.
One option is to create multiple queries (for each selection criteria that I want) and assign these directly to user (rather than the role) in the config - but that's config that I'd need to transport up - for what is essentially user level personalisation.
My strong favourite at the moment is to throw a breakpoint in CL_POWL_QUERY_ACCESSOR and manually change the user name as I save new queries in directly in production - but that's not exactly the cleanest solution.
Surely someone has had a need to actually create queries for users, not just delete them as per program POWL_D01?
Many thanks for any hints and tips
Cheers,
Chris

Well - I should point out that you don't have to transport those user assignment of queries - tables are production maintainable. However, you do have to transport up the query itself - so not ideal.
Oh well - don't think this one has an answer => closing it to open another question.
Cheers,
Chris

I keep getting ' user not register for online ' when trying to get track names for my CD imports

Please help, I am unable to import any CD's I keep getting "user not registered for online use"
I am running Windows Vista, Itunes 12.
I have attempted Repairing & re-Installing, but still having a problem, Any advice please folks.

See this thread: Re: itunes 12 track names not found and user not registered for online use.
Some extra cleaning may sort things out.
tt2

Dump ASSIGN_TYPE_ILLEGAL_CAST in SAPLSDSD for 1 user, not for others

Similar Messages

Maybe you are looking for