Dump error Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
hi ppl,
I have created a simple badi,when i call this badi its showing the dump error Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
HI,
I have checked all of them
Actually i am trying this example from saptechnical. com
Even i have tried others examples also but everytime I am recieving dame dump
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.*
Edited by: Sumesh Nair on Apr 24, 2009 7:08 AM
Edited by: Sumesh Nair on Apr 24, 2009 7:09 AM
Edited by: Sumesh Nair on Apr 24, 2009 7:09 AM
Similar Messages
-
Error: Exception condition "GUID_FOR_LOGSYS_CHANGED" raised
Hi,
We recently did a client refresh/copy of one of our backend (R/3) systems. So I checked and re configured (where necessary) the following tables in R/3:
CRMCONSUM
CRMSUBTAB
CRMRFCPAR
CRMPAROLTP
I only had to recreate the logical system for CRMRFCPAR, but when I try to replicate Master data, I now get the following message?
<b>Exception condition "GUID_FOR_LOGSYS_CHANGED" raised</b>
Any suggestions on how I can rectify the GUID?Hi,
Also read the followng threads :
https://forums.sdn.sap.com/click.jspa?searchID=4061447&messageID=1549224
https://forums.sdn.sap.com/click.jspa?searchID=4060901&messageID=3267006
Kind regards,
Yann
Message was edited by:
Yann Bouillut -
CRM 5.2 : Authorization error : Exception condition "FAILED" raised.
Hi all,
I'm using CRM 5.2 and when we want to create a user (SU01) with a specific role such as SAP_CRM_UIU_SRV_PROFESSIONAL without any profil or any more role, the user can not acces to the Web GUI.
Here is the exception :
Note
Le message d'erreur suivant a été traité dans le système C52 : Exception condition "FAILED" raised.
L'erreur s'est produite sur le serveur d'application CRM52_C52_00 et dans le processus de travail 0 .
Le type d'interruption est le suivant : RABAX_STATE
La hiérarchie des appels ABAP est la suivante :
Method: GET_APPL_MODEL of program CL_BSP_WD_APPL_MODEL==========CP
Method: CONSTRUCTOR of program CL_BSP_DLC_VIEW_DESCRIPTOR====CP
Method: IF_BSP_DLC_CONFIGURATION~GET_PROPERTY_DESCRIPTOR of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: WD_VIEW_INITIALIZE of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: WD_INTERFACE_VIEW_INITIALIZE of program CL_BSP_WD_COMPONENT_USAGE=====CP
Method: BIND_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: WD_VIEW_INITIALIZE of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: BIND_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: WD_VIEW_INITIALIZE of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: BIND_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
After some reasearch, I've set the role SAP_ALL and SAP_NEW and all work fine, but I'm not agree to put all that tole to my users. Is their any other solution ?
Thanks.
Kind RegardsHi,
I had the same in CRM 6.0.
Look at note 1136402, correction 609218. Then you wont get a raise exception.
There are some technical authorisations in the role
SAP_CRM_UIU_FRAMEWORK. Assign this role as well.
You first need to assing your user role to an organisation. Then take the report CRMD_UI_ROLE_ASSIGN in SE38. Here you need to assign the role SAP_CRM_UIU_FRAMEWORK.
There is a description in the UI-framework customizing .
Hope it helps
Andreas -
Exception condition "CNTL_ERROR" raised - Error in ITS
Dear all
I have created ITS link for Solman - Solar02 t.code When I was trying to upload document in Solar02 using ITS (both using ITS from Solman SICF service, I am getting a dump error,
Exception condition "CNTL_ERROR" raised.
But when i was uploaded in sapgui, it uploaded.
Let me know the solution for this?This kind of error usually points to the incorrect use of Enjoy SAP controls like ALV, Text Edit, HTML viewer etc. They make use of a framework which can only be handled in the standard SAP GUI and not in WebBased applications. So I guess you will have to come up with something else, because I don't think this is going to work like this.
-
Exception condition "CNTL_ERROR" raised - ITS services
Dear all
I have created ITS link for Solman - Solar02 t.code When I was trying to upload document in Solar02 using ITS (both using ITS from Solman SICF service, I am getting a dump error,
Exception condition "CNTL_ERROR" raised.
But when i was uploaded in sapgui, it uploaded.
Let me know the solution for this?HI Iván Cabezas Castillo
I have created ITS link as below
http://host:port/sap/bc/gui/sap/its/solar02?sap-client=200
with a parameters
~WEBGUI_SIMPLE_TOOLBAR 1
~WEBGUI 1
~TRANSACTION SOLAR02
~SINGLETRANSACTION 1
Still i am facing the same error. -
Error in BEx Analyzer Exception condition "HIERARCHY_NOT_FOUND" raised.
When i run report 0FIAA_C02_Q1001 with input variable as "My controlling area" i get this error.
ERROR:
Exception condition "HIERARCHY_NOT_FOUND" raised.
ERROR Analysis:
A RAISE statement in the program "SAPLRRH1" raised the exception
condition "HIERARCHY_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Please sugggest how to resolve this.
HOw to see which hierarachy it is talking about?
Thanks,
Harika.
Edited by: harikag on Oct 12, 2011 7:11 AM
Edited by: harikag on Oct 12, 2011 7:12 AMHI
FOr 0Costcenterinfoobject->attribute tab->no hierarhcies
->hierarchy tab->i see hierarchy tables are enabled.But when i click on
"MaintainHierachy" there are no hierrachies in it.
For 0CO_AREA infoobject->attribute tab->0CCA_HIENM,0PCA_HIENM hierarchies are there.
->hierarchy tab->nothing is there.
please help out.I didnt load 0COSTELMNT_0102_HIER master datasource in CO_IO.
Is that the reason? -
Getting a dump Exception condition "CNTL_ERROR" raised in ALV
Hi ,
I have a requirement where I have to do drag and drop operation of TOs from one queue to another queue in an ALV tree between nodes. The drag and drop operation is working fine, but suddenly i get a dump lilke * Exception condition "CNTL_ERROR" raised* .
A RAISE statement in the program "CL_GUI_CFW====================CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
This dump is occuring from a customized transaction ZLRF1 ... where I copied all the includes from the LRF1. So, i will not be able to use any note. Can any1 please help me to resolve this issue <removed by moderator>
Edited by: Thomas Zloch on Sep 15, 2011 1:46 PMSince you're saying you made a copy of all the includes to their corresponding zincludes, in the following includes
ZLLRFMONTOP
replace LRF1 with ZLRF1 and make sure the following includes are activated
ZLLRFMONCLA
ZLLRFMONTOP -
Exception condition "COMMUNICATION_ERROR" raised.
Hi Experts,
Now Im working with Business graphis. After comple the designing I Tested the Webdynpro Application.
It shows Dump like "Exception condition "COMMUNICATION_ERROR" raised".
The Error Description is :
The URL http://sapecc6ides.ssdomain.com:8001/sap/bc/webdynpro/sap/zgra_demo/ was not called due to an error.
Note
The following error text was processed in the system E60 : Exception condition "COMMUNICATION_ERROR" raised.
The error occurred on the application server sapecc6ides_E60_01 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: EXECUTE of program CL_IGS_CHART_ENGINE===========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LBUSINESS_GRAPHICS======CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
Method: IF_WDR_RESPONSE_RENDERER~RENDER_VIEWS of program CL_WDR_CLIENT_SSR=============CP
Method: IF_WDR_RESPONSE_RENDERER~RENDER_USER_INTERFACE_UPDATES of program CL_WDR_CLIENT_SSR=============CP
Any one help me on this issue.
Points will be rewarded.
Edited by: Viji on Dec 21, 2007 1:04 PMHi,
I think it's due to lack of configured IGS - Check your Internet Graphics Server settings/config.
Regards
Raja Sekhar -
Exception condition CNTL_ERROR raised
Hi everybody
I try to create a Business Partner of t_code "BPV1", and I used to create the t_code "sm35" to do a recording of the t_code "BPV1.
1. I tested my recodring a then hasn't problems.
2.I create a function module with this recording and then I tested, it hasn't problems.
3. This function I invoque on ABAP Proxy, then I tested the ABAP Proxy. it hasn't no problems.
4. But when PI consume and get service of my ABAP Proxy dump this error
"Exception condition CNTL_ERROR raised"
The cancelation class was : RABAX_STATE
I think that the problem is my recording but I tested all and it hasn't problems. The problem display only qhen PI try to consume my service of ABAP Proxy.HI,
2.I create a function module with this recording and then I tested, it hasn't problems.
I presume you tested the FM in SE37, try this call this FM in a test report program and call the FM in "BACKGROUND TASK" or call the FM in normal way and schedule the report to run in the background and see the results.
3. This function I invoque on ABAP Proxy, then I tested the ABAP Proxy. it hasn't no problems.
Again I presume you tested the FM in SPROXY, create a report program and create an instance of the proxy class and invoke the schedule the report to run in background.
The reason why the call from PI is failing because the BDC recording you have done has some control elements that need GUI support, now when you try using SE37/SPROXY the GUI is available and hence your testing went smooth.
4. But when PI consume and get service of my ABAP Proxy dump this error
When the call is made from PI, there is no GUI available and hence the program terminates.
Solution: I am sure there are BAPI's available with which you can create partners, try and look for a BAPI which can do this.
Regards,
Chen -
Approval Overtime iView Error - "Exception condition "PROFILE_NOT_FOUND"
Hi There
I have looked at every forum thread loaded on this site and if I missed something I do apologise.
I keep on getting error - "Exception condition "PROFILE_NOT_FOUND" raised., error key: RFC_ERROR_SYSTEM_FAILURE"
I have maintained what I deem the relevant configuration in my view and also updated the user parameters.
SAP_LINE
Field Selection Detail Screen PERNR Personnel Number
Field Selection Indiv. Record View PERNR Personnel Number
from the default
Field Selection Detail Screen ESS Personnel Number
Field Selection Indiv. Record View ESS Personnel Number
CATS Approval: Individual Record - PERNR
CATS Approval: Details - PERNR
Approval Profiles - ZLIN
Any help will be appreciated.
Regards
MaahirDear Maahir,
Have you defined a CATS Data Entry Profile in the CVR user parameter? Would you please also check whether the default 'ESS' profile does exist in your system? The Manager have an infotype 105 in valid period right?
Normally this error comes on ESS when the system is looking for a CATS Data Entry Profile, which has not been assigned to the user.
This CATS profile can be assigned to the user either via the User Parameter 'CVR', with the name of the Date Entry Profile entered as the parameter value, or by creating a default ESS Data Entry Profile. R/3 can then assign a profile to the employee even if the user parameter CVR has not been explicitly set. The CATS Data Entry Profiles are stored in the table TCATS.
For more information on creating the default Data Entry Profile, see the IMG, under Cross-Application Components -> Time Sheet -> Specific Settings for CATS -> CATS regular -> Set Up Data Entry Profiles.
For more information on the CVR user parameter setting, see the SAP Library, under Cross-Application Components -> Cross-Application Time Sheet (CATS) -> User Interfaces -> CATS regular.
As it is in MSS when approving, here I am giving you some information which will help you in this regard (PROFILE_NOT_FOUND):
In the IMG (transaction SPRO), go to
- SAP Customizing Implementation Guide
- Cross-Application Components
- Time Sheet
- Specific Setting for CATS regular
- CATS regular
- Approve Working Time
- Define Field Selection for Individual Approval View
- Define Field Selection for Detail View
Hope the above information should help.
Best Regards,
Deepak.. -
Exception condition "CNTL_ERROR" raised for u201CSAPLBEA_OBJ_UF02u201D
Dear All
I am getting the error {Exception condition "CNTL_ERROR" raised.} for the program. SAPLBEA_OBJ_UF02. The billing document is being posted to accounting but I am getting the above error when I view the accounting document through /BEA/CRMB11 (display accounting document). We are using CRM billing.
Plz help
Rgds
PraveenHello Praveen,
Can you apply notes ;
893175 Fixed CNTL_ERROR when using RFC-recorder in tRFC
1303765 Query text or diagnosis text not displayed correctly
thanks
Willie -
Exception condition "NO_TRIGGER_INSTANCE" raised error in SMQ2
Dear all,
i'm getting this error in SMQ2 transaction of xi server.
Exception condition "NO_TRIGGER_INSTANCE' raised
Did anyone encounter this issue before. Pls share your inputs in resolving it,
Regards,
JackHi ,
Can you provide the details of this dump from ST22 for understanding .
Regards ,
Hanumant . -
Error while processing dimension: "Exception condition "X_MESSAGE" raised"
Hi,
I have recently transported an Appset from development to production environment. The transport finished successfully, without any error.
Then I update the members of the dimensions and I process it (Production Environment). I get "Exception condition "X_MESSAGE" raised."
I need to solve this problem as soon as possible.
Regards,
Miguel.check the below link
Re: Dump when doing selective deletion -
Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
Hi All,
I am facing a runtime error, while using transaction DSWP --> Set-up System Monitoring --> Copy Customizing -->
At that time we are getting "Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
===========================================
Runtime Errors RAISE_EXCEPTION
Date and Time 25.07.2008 08:31:11
Short text
Exception condition "METADATA_MISSING" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLDSVAS_SERV" raised the exception
condition "METADATA_MISSING".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLDSVAS_SERV" or "LDSVAS_SERVC7I"
"MAP_DSVAS_TT_DATA_TO_TT_25"
or
"SAPLDSVAS_SERV" "METADATA_MISSING"
or
"RDSMOP_MAIN " "METADATA_MISSING"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "terra"
Network address...... "172.16.1.198"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "TERRA"
Database type..... "ORACLE"
Database name..... "DSM"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 01:07:18"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 133
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 37628064
Heap.... 0
Page.... 65536
MM Used. 31785376
| MM Free. 1656912
=============================================
Configuration:
OS :Windows 2003 server.
Solution Manager 7.0 SP15
Oracle 10.2
RAM - 2 GB
Its bit urgent, Please help out us.
Thanks in advance.
Best Regards,
PratyushaHi
Check the SP level for ABAP and Basis. Download the latest SP level from SWDC and apply it on the system
This error is related to ABAP program.
Currently the latest available patch level is 16. Please download both ABAP and BASIS SP 16 and apply them on the system. -
Runtime error raise_exception (Exception condition "NOT_EXIST" raised)
Hi,
I tried to ran a DTP to load data in a Standard DSO. Once I run the DTP ,instantly it is showing me short dump.I tried to ran it 2 times. Every time it shows me dump
Runtime Errors RAISE_EXCEPTION
Short Text : Exception condition "NOT_EXIST" raised.
Error Analysis : A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Thanks in advance,
Regards,
SnehasishHi,
This kind of issues occur in BI7.0, the cause is not clear.
You can once again delete the Data in the DSO using SE14(If Production system, make sure you contact your Basis team for this).
You will have to use the table names(check the Delete data option & click on Activate and adjust databas)
Thanks,
Maybe you are looking for
-
Hi, This is kinda a little long winded but I wanna give full details so you get the best idea what's going on. I backed up my phone and hard reset it. I restored my messages, then a couple of days later it occurred to me that before I had done the r
-
How to sync movies on your ipod
How do you sync a movie onto your ipod with the new itunes?
-
SSD for Media Cache and Preview files ...bad idea?
Hi guys! Today I killed my 3rd SSD.I used both of them for store Media cache and preview files with Premiere Pro and After Effects CS5.5. 1st was OCZ Vertex 3 240GB than I replaced to a new one.After few weeks later the 2nd OCZ Vertex 3 dead. And now
-
Hi, Db version: 11.1.0.7 Application : R12.1.1 I was refering to the note Hijrah and Thai Calendar Support in Oracle E-Business Suite Release 12.1 [ID 807393.1] Which will enable the hijrah calendar. It is ok fine. But when i set those profile option
-
How to restore iTunes on Time Machine
When I try to restore my lost music on iTunes with Time Machine, it tells me that iTunes cannot be modified as it is an integeral part of OS X. There has to be some way to restore this lost music (Thank you, Onyx!) and I would appreciate your good he