Dump Error in Create Customer XD01 and FD01

Dear Experts.
When I am trying to create the customer by using the transaction code XD01 and FD01, I am getting the dump error as below.
"No component exists with the name "ISU_ACTIVT", but there are the foll"
"owing components with similar names: "PS_ACTVT" and "IM_ACTVT". ."
Kindly help me to resolve this issue.
Thanks
Aswin

Hi Aswin,
Attached thread deal with the same kind of issue. Please have a look.
IS-U authorization
Warm regards,
Murukan Arunachalam

Similar Messages

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Error while creating customer account sites from backend

I am creating Customer Account Sites using the TCA API from Toad.
I am getting the following error
The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
The Operating unit has been defined.
I am using the following code:
DECLARE
p_cust_acct_site_rec hz_cust_account_site_v2pub.cust_acct_site_rec_type;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_cust_acct_site_id NUMBER;
BEGIN
p_cust_acct_site_rec.cust_account_id := 9462;
p_cust_acct_site_rec.party_site_id := 5473;
--p_cust_acct_site_rec.language := 'US';
p_cust_acct_site_rec.org_id := 126;
p_cust_acct_site_rec.created_by_module := 'TCA-EXAMPLE';
hz_cust_account_site_v2pub.create_cust_acct_site(
'T',
p_cust_acct_site_rec,
x_cust_acct_site_id,
x_return_status,
x_msg_count,
x_msg_data);
dbms_output.put_line(SubStr('x_return_status =
'||x_return_status,1,255));
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line(SubStr('x_msg_data = '||x_msg_data,1,255));
IF x_msg_count >1 THEN
FOR I IN 1..x_msg_count
LOOP
dbms_output.put_line(I||'. '||SubStr(FND_MSG_PUB.Get(p_encoded =>
FND_API.G_FALSE ), 1, 255));
END LOOP;
END IF;
END;
Thanks and Regards,
K tanna

Duplicate post.
Error while creating customer account sites
Error while creating customer account sites

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Error while creating customer master data

dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
Debesh

Hi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

Urgent help needed in creating customer ship_to and bill_to site id

Hi,
I am using an api to create customer ship_to and bill_to address, in Oracle OM R12 but the api does not return values. I am including the code so any suggestion will be helpful.
declare
l_num_billing_site_use NUMBER;
l_num_cust_site_id NUMBER;
l_rec_cust_site_use apps.Hz_Cust_Account_Site_V2pub.CUST_SITE_USE_REC_TYPE;
l_rec_customer_profile apps.Hz_Customer_Profile_V2pub.CUSTOMER_PROFILE_REC_TYPE;
l_chr_retcode VARCHAR2(20);
l_chr_errbuf VARCHAR2(200);
l_num_count NUMBER;
begin
-- fnd_global.apps_initialize (1885, 21623, 660); -- user id, --resp_id (OM Super User), appl_id
-- mo_global.init ('AR');
-- mo_global.set_policy_context ('S', 511);
l_rec_cust_site_use.site_use_code := 'BILL_TO';
l_rec_cust_site_use.cust_acct_site_id := 24919;
l_rec_cust_site_use.primary_flag := 'N';
l_rec_cust_site_use.created_by_module := 'CONVERSION'; -- Change
BEGIN
apps.Hz_Cust_Account_Site_V2pub.create_cust_site_use( p_init_msg_list => FND_API.G_FALSE
, p_cust_site_use_rec => l_rec_cust_site_use
, p_customer_profile_rec => NULL --l_rec_customer_profile
, p_create_profile => FND_API.G_FALSE
, p_create_profile_amt => FND_API.G_FALSE
, x_site_use_id => l_num_billing_site_use
, x_return_status => l_chr_retcode
, x_msg_count => l_num_count
, x_msg_data => l_chr_errbuf);
EXCEPTION
WHEN OTHERS THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,' Unexpected error creating customer site for Cust Site Id ' || l_num_cust_site_id || ' due to: ' || SQLERRM);
END;
dbms_output.put_line('cust_site_use:'||l_num_billing_site_use);
end;
Thanks,
Srinivas
Edited by: user2138419 on Feb 14, 2010 4:46 PM

It might be a crossdomain.xml problem.
Please make sure that the server hosting the xml allows the domain where the swf is hosted.
You can start with:
<?xml version="1.0" encoding="utf-8" ?>
<cross-domain-policy>
<allow-access-from domain="*"/>
<site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

Creating Customized Table and Modify Table Maintenance Screen

Hi,
I have already created customized table and generate the table maintenance screen, however i encountered 1 problem which is i cannot add new PAI and PBO module in the flow logic. Every time i wanna add new module, i will be getting error message saying that my user currently editing the screen. Any suggestion ?
Thanks.
Jon

Hi <b>Jonathan</b>,
Please close all the windows and relogin
For making PAI and PBO modules, Please activate all the Table and its maintainence view.
Now first make emptu file with <main filename>_PAI and <main filename>_PBO save and activate them.
Now put the logic in them and then activate now call these in the main prog.. it should work...
While activation all the sub program modules should be activated already... i suggest select all the prog and sub progs and activate them all at once...so the system automatically takes care of inner activations first...
If u have some more quereies... please feel free to contact me...
Regards,,
<b>Abhishek</b>

I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?

I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?

Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The door to the user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Error while creating customer master XD01

i have created own account group and assigned external number range when am creating customer in xd01 am getting error in partner tab the SP,SH,BP,PY the no is blank and when am trying to save its gives error document is incomplete the error Message no. F2643
Diagnosis
The account group of the current customer is not defined for the required partner usage.
where as when am assining internal number range its working fine kindly help
Thanx

Hi Mukesh
Please check the following again,
IMG > Logistic > SD > Basic functions > Partner determination > Customer master
Define the Partner functions. If you are defining new then specify the "PARTNER TYPE" for each Partner function.
- Define Account group. You can use existing one (0001-sod-to-party) or you can copy it or create new.
- Define your Partner determination procedure.
- Assign the required Partner functions (SP,SH,PY and BP are mandatory) to your Account group, so that they will be permitted for your Account group.
- Assign the "Partner functions" to your new "Procedure ". Here you specify which are "mandatory" and which are "not changeable".
- Assign the "Account group" to your new "Procedure".
Now, go to XD01,enter your Account group,External number,company code,Sale area and proceed.
If you are finding problem then,fill up all your data (general data, company code data), go to sales area data, fill up sales ,shipping and billing document tab and save it.
Next, go to XD02, sales area data >partner function tab, here fill up the places for respective Partner functions.

Error in creating Connection Object and Device Location

Hi ,
When i am creating Connection Object and Device Location , system is giving dump . all other object are working fine.
the error is gievn below :
Error in reading table TE130.
i checked this the table , its have no entries ( mainly field ISTYP is blank ) and this is the cause of problem .
Could you please tell me that how to fill this table before creating Connection object and device location. i think some configuration should be needed for this but i dont know how .
thanks and regards
Deepak.

Hi Deepak,
You can check standard configuration in client 000.
Meanwhile you can use this settings:
ISTYP TPLKZ FLTYP NUMKI NUMKE
C AO_GP A 01 OC
D AO_GP G 02 OC
This is where you define structure indicator for isu technical location category.
ISTYP correspond to the type of technical location in ISU, C for connection object and D for device location
The content of TPLKZ is defined in the following menu in SPRO.
Plant Maintenance and Customer Service
Master Data in Plant Maintenance and Customer Service
Technical Objects
Functional Locations
Create Structure Indicator for Reference Locations/Functional Locations
Hope it helps,
Regards,
Daniel Valenzuela
Edited by: Daniel Valenzuela on Feb 4, 2008 3:22 PM

Dump error while creating a new page in smartforms URGENT pls!!!

while creating a new page it is showing me a dump error , that the superior program execption was not intercepted , i have even given the next page field also correctly, i have attached a mainwindow to that page and a text element to that . .
thanks
sridhar

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Error while creating customer

While creating customer from AR responsibility, I am getting an error while clicking "details" tab for "Ship to"
error I am getting are
1. The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
2. Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-20001: Operating unit -1 does not exist in the target database. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.GL_GLOBAL", line 65 ORA-06512: at line 1 ;
any idea why is it coming, I checked Operating unit profile option i.e MO: Op Unit and MO: Sec. , all are fine.

The error is occuring because Oracle is trying to validate/set a DFF.
Check the DFF attached to the customer entity, address entity or site use entity.
Especially look at the value sets attached to the DFF.
Look at the value set definition and the default value for the field.
Hope this helps,
Sandeep Gandhi

Dump Error in Create Customer XD01 and FD01

Similar Messages

Maybe you are looking for