Dump error in customizing flexible planning

Hello,
Am preparing for building customized flexible planning according to the SAP standard i had prepared the EX:ZETHPLN
planning type for fiscal year.
But when running its giving dump error tht in MMCP5575
'pmnux' NOT found but in my infostructure S575 i dnt have this field but run time this is giving dump plz if any from PP back ground help me.

Hi
while creation of infostructure in flexible planning in MC21 , you should have geneated .
Finally infostructure status should be active & saved.
Then MC7F you should have created all paramters properly.
Pl. chk.
REgards
YMREDDY

Similar Messages

Error Creating Flexible Planning (MC93)

Hi I am implementing Flexible Planning and I have had problems changing characteristics in info structures.
1. First in Development environment I customized an info structure that i transport to QAS.
2. I deleted a characteristic in the info structure I generate again the tables and everything it´s ok and I execute transaction MCSY for resetting, then i transport to QAS and I don´t have problems.
3. The problem it´s when I add a new characteristic to the info structure I execute the same steps and I transport to QAS when I try to create a Planning (MC93) I got an error: "Internal error : 047 in routine Planning Coding" Message No. MA 098
I was looking for notes and there is the same error but in older versions and all the support packages have been implemented. I am using 4.6c version and I found this problem in older versions like 3.0 I really don´t know what it´s going on and i hope you could help me or maybe what could be the reason. I don´t think that it´s customizing.
Thank´s in advanced

HI, I proved like this:
1. I executed transaction MC8O for regenerating programs.
2. I executed transaction MC22 for generate info structure
3. I created a new transport order
4. I realesed the transport order
5. The transport was made from Development to QA
Again I got the following transport errors:
"Finished with return code 8" = 8 errors
I proved again with transaction MC93 for create a new Flexible Planning and I´ve got error 047 again.
What do you suggest???

Error in Data Transfer : From CO-PA to SOP Flexible Planning

Hi Friends
I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me..
The following configuration steps are done with Example;
Characteristic assignment
u2022 Sales Organization
u2022 Region
u2022 Plant
u2022 Material Number
u2022 Material Group
Key figure(s) assignment
u2022 Sales Quantity
Assignment: Information structure - operating concern
S555 u2013 Z001
Define activities Z1
Mass Processing Job : ZSO-PA
We are able to transfer data from CO-PA to standard SOP, But we tried for transfer to Flexible Planning SOP by creating Mass Processing Job setting as below configuration path.
Production -> Sales & Operations Planning (SOP) ->Functions -> Mass Processing -> Transfer LIS / CO-PA
After executing Job MC8G - Schedule, we checked in Tcode - MC8I u2013 Check, Status: Processed with errors, And also data are not displayed in Tcode : MC95 for Material & active version.
We couldnu2019t find log for error status.
What is the method / Procedure for transfer data to Flexible Planning SOP?
Please get back to me.

Dear,
Status:            Processed with errors ok
Activities checked:? what is the error message here like
   COPY
       Planning type in activity and job not identical
       Planning type of job: SOPKAPAM
       Plng. type of activity:Z004PLAN
When checking a mass processing job in SOP/flexible planning (Transaction MC8I), in the log error message "Activity and COPA profile have different planning versions?
Or planned/actual indicator in the COPA profile?
Version should be        A00
Please check the MC8S. Then an Avtivity in MC8T
after you create the job in MC8D with the acitivity you have defined for your info structure.
After that check in MD62 for plan value.
Regards,
R.Brahmankar

Dump Error in Create Customer XD01 and FD01

Dear Experts.
When I am trying to create the customer by using the transaction code XD01 and FD01, I am getting the dump error as below.
"No component exists with the name "ISU_ACTIVT", but there are the foll"
"owing components with similar names: "PS_ACTVT" and "IM_ACTVT". ."
Kindly help me to resolve this issue.
Thanks
Aswin

Hi Aswin,
Attached thread deal with the same kind of issue. Please have a look.
IS-U authorization
Warm regards,
Murukan Arunachalam

Error for customer specific Authorization check (User Exit)

Dear Experts,
I am facing a problem in PM.
I have created a maintenace plan for calibration via t code IP42 and mentioned the order type PM05. Scheduling is done for the order. I got the order number.
I have released the order and got the inspection lot number.
While entering the results recording through t code QE17, the reluts are out of the specified range, i have given the valuation Rejected, immediately system is giving an error message as below:
"Error for customer specific Authorization check (User Exit)"
Though there is no user exit activated in the system, this message is coming and not allowing the result recoring for rejection.
If I'm entering the result recording within the specified range, then valuation is Accepted and its allowing to save.
I have checked the following user exits:
QQMA0002: QM: Authorization Check for Entry into Notif. Transaction
QQMA0026: PM/SM: Auth. check when accessing notification transaction.
The above 2 User Exits are not active.
I have also checked a note 429066. But it says incase of any dump for that user exit only its applicable and more over the current version of the system is ECC 6.0 packae 15, where as that note is applicable upto 4.6C.
Please some one help me on this issue.
Thanks and Regards,
Praveen.

Dear Pete,
I have cheked with my technical team, There is no hotpacks updated recently. This is the implementaion project I'm in, so performing the cycle for the first time.
Any how I got it solved, in T code QE17, after entering the Inspection lot in next screen goto menu path Settings - User settings - Defects recording mention the reprt type and tick on Reprt type Changable.
At the time of result recording if the valuation is Rejected then it ask for defects recording close that window if not rwequired then save, the error message no longer apperaing now.
Regards,
Praveen

Getting a program Dump Error in Herarchial ALV

Hello All,
I am getting a dump error when I am executing the below program. Kindly help as I am not getting the output. However all the subroutines are getting properly populated with data. Getting a dump error while calling the function : REUSE_ALV_HIERSEQ_LIST_DISPLAY
Pasted below are both the question and solution. Copy the solution in SE38 and execute it to check out the dump error.
Kindly help.
Thanks,
Vinod.
QUESTION :-
Objective
     Hierarchical ALV for displaying Sales documents per customer
Design
     Create a program that will allow the user to display all customers that have placed Sales Orders in the given date range. The user will have an ability to drill-down to see the sales order items per customer.
     Selection screen fields
          Sales order creation date (range)
          Customer number (range)
     Output
          Header
               Customer Number
               Customer Name
               Total Order value (sum of order values from items below)
          Details
Sales order number
Material number
Order quantity
Order value
Reference
     Tables: KNA1, VBAK, VBAP
     Transaction VA03 (Sales order)
SOLUTION :-
*& Report Z_HALV_32722                                                *
REPORT Z_HALV_32722                            .
TYPE-POOLS: slis.
TABLES : kna1,
         vbak.
SELECT-OPTIONS: s_cst_no FOR kna1-kunnr.
SELECT-OPTIONS: s_cr_dt FOR vbak-erdat.
DATA : BEGIN of ty_hdr,
        kunnr TYPE vbak-kunnr,
        name1 TYPE kna1-name1,
        netwr TYPE vbak-netwr,
        END of ty_hdr,
        gt_hdr LIKE TABLE OF ty_hdr,
        gs_hdr LIKE LINE OF gt_hdr.
DATA : BEGIN of ty_ln,
        kunnr TYPE vbak-kunnr,
        vbeln TYPE vbap-vbeln,
        matnr TYPE vbap-matnr,
        kwmeng TYPE vbap-kwmeng,
        netwr TYPE vbap-netwr,
        END of ty_ln,
        gt_ln LIKE TABLE OF ty_ln,
        gs_ln LIKE LINE OF gt_ln.
DATA : BEGIN of ty_hdr1,
        kunnr TYPE vbak-kunnr,
        END of ty_hdr1,
        gt_hdr1 LIKE TABLE OF ty_hdr1,
        gs_hdr1 LIKE LINE OF gt_hdr1.
DATA : gt_fc TYPE slis_t_fieldcat_alv,
       gs_fc LIKE LINE OF gt_fc,
       gs_k_fld TYPE slis_keyinfo_alv,
       gt_layout TYPE slis_layout_alv,
       gv_repid TYPE sy-repid.
START-OF-SELECTION.
gv_repid = sy-repid.
perform fetch_data.
perform prepare_fc.
perform prepare_layout.
perform show_output.
*&      Form fetch_data
      text
--> p1        text
<-- p2        text
form fetch_data .
SELECT kunnr
INTO CORRESPONDING FIELDS OF TABLE gt_hdr1
FROM vbak
WHERE vbak~kunnr IN s_cst_no
AND vbak~erdat IN s_cr_dt.
DELETE ADJACENT DUPLICATES FROM gt_hdr1 COMPARING kunnr.
LOOP AT gt_hdr1 INTO gs_hdr1.
SELECT SINGLE vbakkunnr kna1name1 SUM( vbak~netwr )
INTO (gs_hdr-kunnr, gs_hdr-name1, gs_hdr-netwr)
FROM vbak INNER JOIN kna1
ON vbakkunnr = kna1kunnr
WHERE vbak~kunnr = gs_hdr1-kunnr
GROUP BY vbakkunnr kna1name1.
APPEND gs_hdr TO gt_hdr.
SELECT vbakkunnr vbapvbeln vbapmatnr vbapkwmeng vbap~netwr
INTO CORRESPONDING FIELDS OF TABLE gt_ln
FROM vbap INNER JOIN vbak
ON vbapvbeln = vbakvbeln
WHERE vbak~kunnr = gs_hdr1-kunnr.
ENDLOOP.
endform.                    " fetch_data
*&      Form prepare_fc
      text
--> p1        text
<-- p2        text
form prepare_fc .
CLEAR gs_k_fld.
gs_k_fld-header01 = 'KUNNR'.
gs_k_fld-item01   = 'KUNNR'.
CLEAR gs_fc.
gs_fc-fieldname = 'KUNNR'.
gs_fc-tabname   = 'GT_HDR'.
gs_fc-seltext_l = text-001.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'NAME1'.
gs_fc-tabname   = 'GT_HDR'.
gs_fc-seltext_l = text-002.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'NETWR'.
gs_fc-tabname   = 'GT_HDR'.
gs_fc-seltext_l = text-003.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'VBELN'.
gs_fc-tabname   = 'GT_LN'.
gs_fc-seltext_l = text-004.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'MATNR'.
gs_fc-tabname   = 'GT_LN'.
gs_fc-seltext_l = text-005.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'KWMENG'.
gs_fc-tabname   = 'GT_LN'.
gs_fc-seltext_l = text-006.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'NETWR'.
gs_fc-tabname   = 'GT_LN'.
gs_fc-seltext_l = text-007.
APPEND gs_fc TO gt_fc.
endform.                    " prepare_fc
*&      Form prepare_layout
      text
--> p1        text
<-- p2        text
form prepare_layout .
gt_layout-colwidth_optimize = 'X'.
gt_layout-expand_fieldname = 'TST'.
endform.                    " prepare_layout
*&      Form show_output
      text
--> p1        text
<-- p2        text
form show_output .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
    I_CALLBACK_PROGRAM             = gv_repid
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
    IS_LAYOUT                      = gt_layout
    IT_FIELDCAT                    = gt_fc
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
    i_tabname_header               = 'GT_HDR'
    i_tabname_item                 = 'GT_LN'
I_STRUCTURE_NAME_HEADER        =
I_STRUCTURE_NAME_ITEM          =
    is_keyinfo                     = gs_k_fld
IS_PRINT                       =
IS_REPREP_ID                   =
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                =
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
tables
    t_outtab_header                = GT_HDR[]
    t_outtab_item                  = GT_LN[]
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " show_output

Everything looks fine with the gt_layout, it is not an internal table, so no need to append to it, it is simply a structure, but you do tell it that TST is the expand field, but there is no field of this name in your internal for the header, so add it like this.
DATA : BEGIN of ty_hdr,
kunnr TYPE vbak-kunnr,
name1 TYPE kna1-name1,
netwr TYPE vbak-netwr,
<b>TST type c,</b>
END of ty_hdr,
Doing so should make you program work correctly.
Regards,
Rich Heilman
Message was edited by:
        Rich Heilman

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Short dump error in MIGO transenction.

Hi all,
I am using sap client :800 for Ides. I am going to post GR using Transection MIGO. i get the dump ERROR as
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Technical information about the message:
    Message classe...... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Program                                 SAPLMBWL
Include                                   LMBWLU21
Row                                       59
Module type                           (FUNCTION)
Module Name                          MB_POST_GOODS_MOVEMENT
With description of programme
29 *    when a goods movement for an inbound or outbound delivery is posted
30 *    directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 *    CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
33 *    every document is posted by MB_CREATE -> a new function module in
34 *    MBWL for transferring the information, called by FI, meant to load
35 *    the complete function group for all MBxx postings when this isn't
36 *    required (Performance). Would be the better way to transport the
37 *    information after switching off MBxx in later release.
38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
42    ENDIF.
43    IF xmkpf-xabln IS INITIAL.                               "note 434093
44        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
45    ENDIF.                                                   "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51         EXCEPTIONS
52           error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58    IF NOT sy-subrc IS INITIAL.
>>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
60                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 *     MESSAGE A263.
62    ENDIF.
63 * Optische Archivierung
64 * Spaete Erfassung mit Barcode
65 * Redesign of barcode handling -> note 780365
66   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67                                          xmkpf-mjahr
68                                          barcode.
69
70   MOVE-CORRESPONDING xmkpf TO emkpf.
71   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72     EXCEPTIONS
73       error_message = 4.
74    MOVE-CORRESPONDING xmkpf TO emkpf.
75    CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76         EXCEPTIONS
77           error_message = 4.
78    IF NOT sy-subrc IS INITIAL.
How i can solve this Error.

Dear Baya,
If you do not want to use SAP GTS, please kindly deactivate it.
(or else you would have defined an Rfc destination for it).
Please check customzing below and deactivate GTS connection to the ERP
System:
Possibility to deactivate the GTS transfers (if currently the transfer
is active):
General deactivation of GTS calls using following path in IMG:
SAP Customizing Implementation Guide
-> Sales and Distribution
-> Foreign Trade/Customs
   -> SAP Global Trade Services - Plug-In
    -> Control Data for Transfer to SAP Global Trade Services
     -> Technical Activation of Document Transfer
If you execute these activities you are asked if you want to deactivate
the implementation of BAdI implementations. This has to be confirmed
with yes.
Hope this will help.
Ian Wong Loke Foong

Short dump error in program SAPMV50A after modification

Dear gurus
i have done some modification in vl02n through Badi and it is working fine in Development server.
when i transport it to quality server and test it
it giving a short dump in vl02n while vl01n is working perfectly fine and showing my modification too..
below is the error mentioned
Database error text........: "Unsupported database type in parameter/column
    (168)."
   Internal call code.........: "[RSQL/READ/LIKP ]"
   Please check the entries in the system log (Transaction SM21).
   If the error occures in a non-modified SAP program, you may be able t
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the followin
   keywords:
   "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
   "SAPMV50A" or "MV50AFDB"
   "LIKP_SELECT"
   If you cannot solve the problem yourself and want to send an error
   notification to SAP, include the following information:
Please help
Regards
Saad Nisar

i have created two append structure in standard tables of LIKP & LIPS which are activated and so as LIKP and LIPS
my Badi is also activated and my customized program is also activated.
While making outbound delivery in Quality server it works fine but when i want to make changes in that created delivery it throws dump error
short text
   SQL error in the database when accessing a table.
issing RAISING Clause in Interface
   Program                                 SAPMV50A
   Include                                 MV50AFDB
   Row                                     14
   Module type                             (FORM)
   Module Name                             LIKP_SELECT
rigger Location of Exception
   Program                                 SAPMV50A
   Include                                 MV50AFDB
   Row                                     20
   Module type                             (FORM)
   Module Name                             LIKP_SELECT

Short Dump Error DBIF_DSQL2_SQL_ERROR

Hi All,
I am getting a Short dump error DBIF_DSQL2_SQL_ERROR when I try to selectively delete the contents of an infocube. Now, we have a custom program that does this selective deletion. I had no problem when I ran this program in Development system. But when I try to do the same in Testing system, I get a short dump error.
Additional info: We have DB2 for database.
Thanks,
Ashmith Roy

Hi All,
Thanks for your input. The exact error I am getting is in as follows:
Runtime Error          DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
An SQL error occurred when executing Native SQL.
Error "-199" occurred in the current database connection "DEFAULT".
How to correct the error
     Database error text........: "[IBM][CLI Driver][DB2] DSNT408I SQLCODE = -199,
      ERROR: ILLEGAL USE OF KEYWORD FETCH. TOKEN WAS EXPECTED DSNT418I SQLSTATE =
      42601 SQLSTATE RETURN CODE "
     Database error code .......: "-199"
     Triggering SQL statement...: "FETCH NEXT "
     Internal call code.........: "[DBDS/NEW DSQL]"
     Please check the entries in the system log (Transaction SM21).
Information on where terminated
The termination occurred in the ABAP program "GP41YKV36E6C2VFC36AKSJQXCD3" in
      "COUNT".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "COUNT" "(FORM)" but was not handled locally, not declared in the
RAISING clause of the procedure.
The procedure is in the program "GP41YKV36E6C2VFC36AKSJQXCD3 ". Its source code
starts in line 0
of the (Include) program "???".
So could you please advise as to how to correct the error?
Ashmith Roy

Passing PL/SQL Procedure call to custom explain plan script

Hi,
Oracle have sent me a custom explain plan script and have asked me to pass in my problematic code through it. They use the GET command in their script to retrieve the command which is passed in as a parameter e.g:
@custom_explain_plan <my sql script>
The script has a section as follows:
get &&1 -- my script
0 explain plan set statement_id = 'APG' into plan_table for
This works for a standard SQL statement e.g. SELECT SYSDATE FROM DUAL but (and Oracle Support know this) my issue is triggered by a call to an e-Business Suite API that updates the database. This is contained within a PL/SQL block and COMMITs a few sample updates. I've not used explain plan before but I suspect it can only be used on SQL statements? I have no access to the DELETEs and INSERTs that the API triggers, so what am I supposed to do?
Am I missing something or have Oracel Support sold me a pup?
I thought I'd post here first before going back to them...
Many thanks,
Bagpuss

Sybrand,
Many thanks for the swift confirmation. I didn't think I was going mad! Already gave them a standard trace so I guess it's up to them now - my experience with Oracle Support in the last few years has been very deflating - they evidently do not read/understand much of the information they are given in an SR. Added to that, we've had patches from them with basic syntax errors! I've consistently received much more informed responses from the various OTN forums, which are much appreciated.
I may construct the DELETE and INSERT statements dynamically myself using a typical employee record to at least give them something to ponder over...
Thanks again,
Bagpuss.

Creating infostructure - SOP flexible planning

Hi
Can anybody explain the procedure creating the infostructure in flexible planning (sop).
When i am choosing application as 41 in MC21 and tab Choose characterstics it is displaying an error message Table PFAM is not in the Dictionary - i am testing in ides server.
Regards
Mohan

Hi Siva,
Thank u very much for the perfect gudie that u had given.
Please can u guide me for sop flexible planning any doc any help will be welcome.
Regards
Mohan

Forecast with flexible planning

Hi,
We are going to do forecast with flexible planning.I have created a new infostructure and the planning type.We have loaded the sales values into this infostructure manullay thru. a customised program and executed the forecast on these.I have few questions:
1. Do i need to activate forecasting view in the material master? If it is, why?
2. How many months of historical values i have to consider to calculate the next 12 months forecast and how frequently i have to update my infostructure and calculate the forecast?
3. How the basic value/MAD/Error total will be calculated?
4. when using the automatic model selection with procedure 2 ,it will come up with some model.Is there any way where we can see what the model it has selected and the forecast parameters?
Please don't suggest the SAP help links.
Thanks in advance,
Kumar

Hi,
No need to create a forecasting view in the Material master.
as you are using Infostructure, you are exepcted to use the Mass processing for Forecasting.
Define a Forecasting Profile in MC94.
create a Back ground job for executing the forecasting.
Run the joob.
regards
Ratan

'CONVT_NO_NUMBER' run time error in custom program of upgraded ECC system.

Hi,
I am getting a run time error in custom program and st22 shows 'CONVT_NO_NUMBER' as the cause.
We have just upgraded system to ECC6 and with 4.7 we were not getting this error.
Can you please let me know if there is any SAP note to address this ?
Thanks,
Avinash

Hi Avinash,
Please see the below link for Sap Notes:
[Program is giving a Short Dump u201CCONVT_NO_NUMBERu201D.;
Regards,
Md Ziauddin

Dump error in customizing flexible planning

Similar Messages

Maybe you are looking for