Dump error of t.codes MR51
hello,
I am getting the dump error of t.codes MR51, kindly let me know the errors and how to solve the same and oblige.
thanks
sujatha
Finding the Invoice Number - URGENT
Subcontracting
posting date line items
Posting of Price change document on release of Cost estimate.
help me in functional
Inventory Management - transactions
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25c1f5d1-0901-0010-d495-e96d02a0cb01
Please reward points if helpful.
Similar Messages
-
Dump error of t.codes MR51(top urgent)
hello,
please help me, i am having the problem of findout the error of dump.
t.codes is MR51 while execute getting the error of dump, how to find out the error, i can tried ST22 there also i couldnot understand the error, please let me know the procedure to find out the error in step by step plese.
thanks
sujain ST22... firts check <b>Short text</b>
if you can get some idea out of it then good..
if still error is not clear check <b>What happened?</b>
check the source code extract in order to see where exactly you are getting dump...
at the time of MR51 execution when you get dump... click on debugger.. there you can check if desired values are getting passed... -
Dump error while going for a change mode in MIR4 for parked document
Hi All,
After doing some GR and MIRO for one PO, there was some GR qty was left and I have parked new invoice document in MIRA. If I go for change mode MIR4 for the same parked document it is going to dump error as message type unknown, saying entry is not maintained table TTXD for Tax procedure. This table indicates that Tax jurisdiction, but we are not maintaining the Tax at Jurisdiction level. I found that user has activated calculate tax in MIRA and posted with some amount, here system will not calculate the tax in Tax field because base amount is not there to calculate, so that field shows "zero". For the same parked document in MIR4 I can see some lines which has value 0 in amount & quantity(already cleared GR's for the same PO) and also GR lines.
Can anyone tell me how can I solve this dump error, I want to delete the parked document in legal way.
Regards
ShanuHi Shanu,
Please extract complete dump error by T code ST22 and take a help of your ABAP Team for an analyse the possible cause of dump and also check the relevant note for resolving this dump error.
Regards,
Santosh -
What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?
hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
I am getting dump error while running one report in one select query
Hi,
While running a report program, I am getting a dump error in one select query. So could you please correct the select query so that I can't face the dump error.
SELECT vbeln parvw kunnr INTO CORRESPONDING FIELDS OF TABLE l_t_vbpa
FROM vbpa
FOR ALL ENTRIES IN l_t_backorder_item
WHERE vbeln = l_t_backorder_item-vbeln AND
( ( parvw = c_we AND kunnr IN rng_shipto ) OR ( parvw = c_ag AND
kunnr IN rng_soldto ) ) .
<removed by moderator>
Best Regards,
BDP
Edited by: Thomas Zloch on Apr 30, 2010 12:31 PMHi Bansidhar,
It would be helpful if you could tell what type of dump it is.
If it is a timeout you should check whether l_t_backorder_item is empty - in this case ALL document numbers are selected. f you get the timeout with a populated table consider converting the l_t_backorder_item table into one ore more ranges tables - the select with ranges tables is way quicker than 'for all entries'. But take care the ranges table has not to many entries - the SAP SQL converter puts this into one huge SQL statement and this might become too big to be handled by the database (depends on the actual underlying database).
I would also consider splitting the SELECT into two (2nd one with 'appending into table') to make the code easier to understand It also helps the database system determining a strategy for the select.
Regards,
Gerd Rother -
Dump error after calling a global class from se24
this is the small code i did so far.
parameters: X type i,
Y type i.
data: Z type i.
data: con1 type ref to ZTEST1.
CALL METHOD con1->zm1
EXPORTING
a = x
b = y
IMPORTING
c = z.
write:/ z.
after executing iam getting a dump error-
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "CON1").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi, Could you please tell me how to solve this issue?
-
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance -
Error FF753 Tax code 01 not appear in any G/L account item with FM Active
Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
SandeepHi:
If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
2. The tax code is transferred into all conditions, for which
the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
the condition is not statistical (if it is no invoice list condition),
the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
the condition is not statistical (if it is no invoice list condition).
the condition is not a tax condition.
2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards -
Abap dump error while release Production order
Dear Gurus,
Abap dump error is creating while release production order , pour some light on this issue.
Regards,
KamalHello,
use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
Best regards,
Andrea -
Dump Error while creating Business Partner in FPP1
Dear Experts,
I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
**Error in the ABAP Application Program**
**The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be terminated because it has come across a statement that unfortunately cannot be executed.**
**The following syntax error occurred in program "SAPLES02 " in include "LES02U14 " in line 30:**
**"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
Could anyone help me to resolve this issue.
Thanks in Advance,
Regards,
AswinHi,
Please don't go adding fields. Aren't we talking about SAP-standard structures here?
Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
cheers
Paul Bakker -
Dump error while running termination action
I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors SYNTAX_ERROR
Date and Time 21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
include "LCACS_BU_PARTNERU44 " in
line 19:
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
"r such tables in a Unicode context."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLCACS_BU_PARTNER :
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program SAPLBUD_CHECK
Include LBUD_CHECKF01
Row 1.129
Module type (FORM)
Module Name RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1 CALL FUNCTION 'BDT_TBZ1F_GET'
2 EXPORTING
3 iv_objcn = gc_objcn_bupa
4 iv_objap = gc_objap_bupa
5 TABLES
6 et_tbz1f = lt_tbz1f
7 EXCEPTIONS
8 not_found = 1
9 OTHERS = 2.
0 READ TABLE lt_tbz1f INDEX 1.
1 IF sy-subrc = 0.
2 CALL FUNCTION 'BUP_PARTNER_GET'
3 EXPORTING
4 i_partner = is_but100-partner
5 i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE ztpkt = 'RLDEL'
AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner = is_but100-partner
i_partnerguid = ls_but000_int-partner_guid
i_role = is_but100-rltyp
i_dfval = is_but100-dfval
i_calltp = iv_calltp
i_valid_from = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to = is_but100-valid_to_dats
i_valid_to_old = iv_valid_to_old
PORTING
e_result = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result. "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik. -
At the time of RFQ creation dump error
Dear All,
At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
the error message is :
Runtime errors SYNTAX_ERROR
Occurred on 09.09.2009 at 12:10:27
Syntax error in program "SAPLV61A ".
What happened?
The following syntax error occurred in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
Error in ABAP application program.
The current ABAP program "SAPLMEVA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLV61A ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The following syntax error was found in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ARCHIVAL"
Network address.......... "172.26.2.145"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "ARCHIVAL"
Database type............ "MSSQL"
Database name............ "EDP"
Database owner........... "dbo"
Terminal................. "cheeid92corit"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Mar 9 2009 22:54:07"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "SQL_Server_9.00 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 777
User................ "MMCORE"
Language key........ "E"
Transaction......... "ME47 "
Program............. "SAPLMEVA"
Screen.............. "SAPMM06E 0311"
Screen line......... 54
Information on where terminated
The termination occurred in the ABAP program "SAPLMEVA" in
"ME_LOAD_VARIANTS_PRICING".
The main program was "SAPMM06E ".
The termination occurred in line 55 of the source code of the (Include)
program "LMEVAU08"
of the source code of program "LMEVAU08" (when calling the editor 550).
Source code extract
000250 ENDIF.
000260 *--> Initialisieren
000270 *--> not necessary anymore (Raimond Buchholz)
000280 * CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
000290 *--> Preisteile der Varianten besorgen
000300 CALL FUNCTION 'CEI0_GET_CONDITIONS'
000310 EXPORTING
000320 INSTANCE = I_CUOBJ
000330 APPLICATION = 'MM'
000340 TABLES
000350 * CONDITIONS = T_VCKEY. "del 194053
000360 CONDITIONS = T_VCKEY "ins 194053
000370 exceptions "ins 194053
000380 error_message = 01 "ins 194053
000390 others = 02. "ins 194053
000400 *--> Preisteile der Varianten mit Belegnummer versorgen
000410 LOOP AT T_VCKEY.
000420 T_VCKEY-KAPPL = 'M '.
000430 T_VCKEY-VBELN = I_EBELN.
000440 T_VCKEY-POSNR = I_EBELP.
000450 MODIFY T_VCKEY.
000460 ENDLOOP.
000470 ENDIF.
000480
000490 *--> Preisteile der Varianten an Preisfindung übergeben
000500 *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
000510 *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
000520 IF I_NO_LOAD IS INITIAL.
000530 DATA: I_POSNR LIKE VBAP-POSNR.
000540 I_POSNR = I_EBELP.
CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
000560 EXPORTING
000570 APPLICATION = 'M '
000580 VBELN = I_EBELN
000590 POSNR = I_POSNR
000600 TABLES
000610 TVCKEY = T_VCKEY
000620 EXCEPTIONS
000630 OTHERS = 1.
000640 ENDIF.
000650
000660 ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY GVP
SY-UCOMM
SY-TITLE Maintain Quotation : Item 00001
SY-MSGTY E SY-MSGID AIPLOC
SY-MSGNO 002 SY-MSGV1 303632
SY-MSGV2 SY-MSGV3
SY-MSGV4
Kind regards
P.AnandhakumarHi Anandhakumar,
Debugg the transaction with help of ABAPER.
System will show you the reason for the above error.
Hope this should solve your problem.
Thanks and regards
Gitesh -
Dump error when posting through F-02.
Greetings everyone,
When posting G/L act through F-02 we are facing a dump error in QUALITY system and in DEVELOPMENT we are able to post succesfully.
From my primary analysis one standard program is calling and that program has syntax error.
When i checked that program it is saved in local object and generated automaticaly when some thing done is FICO.
Generated Program is Module pool program :GBTV6FI0
Description of that program is below
Generated by report RGUGBR01.
Generated code used by validations substitutions and rules.
!! Do not manually change or transport !!
For reference please find the dump below
Error in the ABAP Application Program
The current ABAP program "SAPLGBL5" had to be terminated because
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "GBTV6FI0 " in in
" in
line 519:
"FORM "SEND_CMPLX_DATA_015" does not exist"
The include has been created and last changed by:
Created by: "DDIC "
Last changed by: "****"
Error in the ABAP Application Program
The current ABAP program "SAPLGBL5" had to be terminated because
come across a statement that unfortunately cannot be executed.
Can any one please suggest me how to resolve this issue.
Thanks in Advance.This looks like you have not transported the code to quality system. This code seems to have been generated when validation, substitution and rules have been defined and is missing in quality system (not transported ?)
Find the form send_cmplx_data_015 in development system and check the version. This is the transport that still needs to be transported to quality system.
I now see that you say it has been saved as local object. In that case assign it to a package and transport in SE80.
And now I see the answer of Klaus, follow the instructions in the note he has supplied first. It seems that note is exactly describing your problem. :-) -
While saving the delivery no in VA02 dump error showing (Arithmatic overflo
Hi,
while saving the delivery no in VA02, one dump error getting displayed.
Arithmatic over flow occurs.
Can any one can say how to rectify the program to avoid dump error
The below lines are showing in dump.
Waiting for quick response.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
caught in
procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An overflow was discovered in an ongoing arithmetical operation with
operands of type P. Possible causes are:
1. The result field of type P is too small for the result.
2. The result or a intermediate result has more than 31 decimal places.
How to correct the error
The result field must be enlarged, if this is still possible. It may
also be possible to break up the current process into subprocesses so
that only smaller values occur.
There may already be a solution to the error in the SAP notes system.
If you have access to the SAP notes system first try searching with the
following keywords:
"COMPUTE_BCD_OVERFLOW"
"BCD_FIELD_OVERFLOW" (Until release 4.0a, this runtime error occurred at this
position)
"SAPMV50A" or "ZSDI_MV50AFZ1_CRPC_CALC_4QA"
"USEREXIT_SAVE_DOCUMENT_PREPARE" ***----
Information on where terminated
Termination occurred in the ABAP program "SAPMV50A" - in
"USEREXIT_SAVE_DOCUMENT_PREPARE".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 666
of the (Include) program "ZSDI_MV50AFZ1_CRPC_CALC_4QA".
The termination is caused because exception "CX_SY_ARITHMETIC_OVERFLOW"
occurred in
procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPMV50A "; its source code begins in line
208 of the (Include program "MV50AFZ1 ".
657 ADD: xvbap-brgew TO l_w_tot_list_vals-brgew,
658 xvbap-zzlogpoint TO l_w_tot_list_vals-zlogpoint,
659 xvbap-zztotgrossvalue TO
660 l_w_tot_list_vals-totgrossvalue.
661
662
663 l_w_tot_list_vals-gewei = xvbap-gewei.
664
665 IF NOT xvbap-pstyv IN zzt_free.
>>>>> ADD xvbap-volum TO l_w_tot_list_vals-volum.
667 ELSE.
668 ADD xvbap-volum TO l_w_tot_list_vals-volum_f.
669 ENDIF.
670 ADD 1 TO l_w_tot_list_vals-zw_nbitem.
Best Regards,
BDP
Edited by: Bansidhar Padhy on Jan 26, 2010 8:24 AMADD xvbap-volum TO l_w_tot_list_vals-volum.
Declare l_w_tot_list_vals-volum as "like vbap-volum" or (preferably) "type volum_ap".
If you're using a packed decimal, you've done something like.... volum(5) type p decimals 2, which is a great way to get an overflow...if you use packed decimals in a program...declare <field> type p decimals <n> without a length attribute, so that SAP can use the full 8 bytes for the calculation.....the put it into a alpha field for display, if needed....
Maybe you are looking for
-
I bought an iPhone 4 less than a year ago, then one day the home button randomly stopped working, I bought the warranty so I decided to call in and see what was wrong with it. The girl said that restoring the phone would correct the problem which it
-
Can I edit a HD project in SD, then export HD from the original files?
I have a project that has been shot in HDV that, for a couple of reasons, I have to edit on my laptop instead of my rather powerful desktop. As well as it being HDV (1080 50i), it's also going to need lots of effects adding to it. Now, my laptop is p
-
will not stay awake. as soon as it powers up it goes to sleep.
-
Dual Monitor for iMac 21.5"
I'm looking buy a second monitor for my late 2011 21.5" iMac. I was looking at the Acer H226HQL (http://www.amazon.co.uk/Acer-H226HQLbmid-21-5-Widescreen-Monitor/dp/B00B07RA6E/r ef=sr_1_4?s=computers&ie=UTF8&qid=1373627515&sr=1-4&keywords=monitors+21
-
Plz help the scenario..i am a new bee to obiee
i have a scenario i have a dashboard which contains 2 objects 1)dashboard prompt( which contains year values ) 2) report (year and sales as columns) what my question is when i select a year in prompt how i want the result is i want CURRENT YEAR DATA