Dump Error TSV_TNEW_PAGE_ALLOC_FAILED
Hello All,
We are getting this dump error, "TSV_TNEW_PAGE_ALLOC_FAILED" in our system.
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
OS AIX 5.3 64 bit
Total Memory : 19 GB
Total Swap Space : 45.91 GB
The present values of the Profile parameters are,
ztta/roll_area - 3000320
ztta/roll_extension - 2000683008
abap/heap_area_total - 2000683008
abap/heap_area_dia - 2000683008
abap/heap_area_nondia - 2000683008
em/initial_size_MB - 4092
Kindly suggest,
Thank You,
Hasan
Hello All,
Thanks for your suggestions.
As it is solman system, when i checked in SM04.
Clnt User TCODE Roll Page Mem(Total) Mem(Priv.)
1 SOLMAN_BTC 0 0 4.541.332 0
1 SOLMAN_BTC 106.496 0 2.351.226 0
1 SOLMAN_BTC 0 0 4.542.228 0
1 SOLMAN_BTC 106.496 0 2.349.850 0
1 USERA 106.496 40.96 2.508.076 0
1 SMD_RFC 106.496 0 806.526 0
1 USERA 106.496 0 8.917.850 0
1 USERA 106.496 40.96 2.657.604 0
1 SMDAGENT_SID 106.496 0 796.868 0
1 SAPJSF 106.496 0 797.174 0
1 USERB SM04 352.256 98.304 11.117.992 0
Similar Messages
-
Hey Gurus,
i am working on a requirement in which select query is fetching 8 fields from a ZTABLE.
IF NOT IT_ZQAPP1[] IS INITIAL.
SELECT AUFNR VORNR PROBNR PIPENO NVORNR SHIFT
PSTAT PRODAT FROM ZQAPP INTO CORRESPONDING FIELDS OF TABLE IT_ZQAPP_B
FOR ALL ENTRIES IN IT_ZQAPP1
WHERE AUFNR = IT_ZQAPP1-AUFNR
AND WERKS IN P_WERKS
AND PRODAT LE P_PRODAT.
it works fine for lesser data but throws a dump error TSV_TNEW_PAGE_ALLOC_FAILED for entries more than 70000,
and my requirement is to fetch more than a lac record.
Kindly Suggest the corrections.
Thanks in Advance...Hi!
This error occurs typically, when there is no more memory for your ABAP session. This means, you have to do one of the followings:
- restrict your report for smaller intervals, like process only 1 month instead of 6 months together
- rewrite your program, and eliminate/refresh/free the unneccesary internal tables, or columns from internal tables. You might even try to remove unneccesary lines from internal tables
- use SELECT - ENDSELECT instead of SELECT ... INTO statement. This could slower your program, but you'll need less memory usage
Check your memory usage always, with SM04 transaction (Goto - Memory menu).
Regards
Tamá -
BW Error : TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
While updating data from PSA of an infopackage i got a short dump called TSV_TNEW_PAGE_ALLOC_FAILED.
So,I made the status of infopackage red and deleted the request.
Will the data be there in the PSA?
If yes,then how to upload the data from psa to datatarget.
There are two data targets maintained for this infopackage.
Do i need to schedule the infopackage again.
Please give me the correct solution.
Its very urgent.Hi,
this eroor normally occurs whent he system is unable to allocate main memory requested by the application.
Now,
if it is a delta,
then you have to make sure that the techynical status is red before delting the req.
Now if full
then delete the red req after forced red in both the data targets and re run the infopackage
contact your basis on this error if required
Hope this helps
Janardhan Kumar -
Runtime errors: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
When I am trying to check the consistency of background jobs in SM65, It is throwig a runtime error TSV_TNEW_PAGE_ALLOC_FAILED. Kindly look into the below text message from ST22.
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "IT_18" could not be enlarged further. To allow
error handling, the table had to be deleted before this log was
created. So, if you branch to the ABAP debugger from the display
of this log, the table will there be displayed with 0 rows.
At the moment of the termination, the following data was
determined for the respective internal table:
Storage location: "Session memory"
Row width: 1296
Number of rows: 1166120
Allocated rows: 1166120
Newly requested rows: 8 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server ord-sapprd_PRD_00 on host ord-sapprd (wp 0)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1878
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 1709536
Extended memory (EM)........... 408685712
Assigned memory (HEAP)......... 1190561024
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"TSV_TNEW_PAGE_ALLOC_FAILED" C
"SAPLSBPT" or "LSBPTFXX"
"DO_TBTCO_CONSISTENCY_CHECK"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "ord-sapprd"
Network address.......... "10.31.18.27"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Kindly suggest me the options ASAP as this is happened in the production system.
Thanks in advance,
Suneetha ReddyHi Sunnetha,
SM65 is a resource hungry tcode, and always suggested to run during a off-business hours. Try to run when there is not much acvitity going on in the system.
I'm not very much sure, but please check how many entries there in TBTCO table. as the dump gives indication of
DO_TBTCO_CONSISTENCY_CHECK.
Check RSBTCDEL(2) program is running daily or not. This runs as a background job to delete the old job information from the tables TBTC*. If this has not run, then you can run and delete older job logs and then retry.
Which system you're using? ECC or BW??
Note - parameter settings of BW largely varies from that of a ECC system.
Thanks,
Debasis. -
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED during extraction
Hi,
Anyone knows what the solution is to this problem:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could |
| not be further extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "xxx" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table
|What happened?
| You attempted to extend an internal table, but the required space was
| not available.
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could
| not be further extended. To enable
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "SAP-Server XXXX" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
| |
| |
| |
| |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| | -
SAP HR Security_ Dump error after table maintenance (T77UA)
Hi,
In our project we have both general authorizations and structural authorizations. There are ESS, MSS and HR Roles maintained in PFCG transactions. Our approach of Role assignments (profiles) is for Users and not against positions.
Hence table T77UA is maintained with Authorization profile (created for HR) against users (who are HR). This authorization profile is used in HR Role and this Role is assigned to the users using SU01 transaction.
I have also used Evaluation path in the authorization profile, which will fetch all the employees under the HR, so that the HR will be authorized to access the data of those employees.
After maintaining the table (T77UA), when i try to test the HR Role in backend for eg: PA20 or PA30 to display any employee data under him, i am getting dump error.
Can someone guide me how i can resolve this!!
Thanks!Hi Christine,
Please find below the error details:
The dump comes when i maintain the Table T77UA (authorization profile against the username).
Is the manual way of maintaining the table, a wrong method? Is there any other approach to go ahead with the structural authorization without maintaining this table? Please suggest.
Runtime Errors: TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
Error analysis
The internal table "\FUNCTION-POOL=RHAC\DATA=OBJECT_TAB1[]" could not be
further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 1388
Number of rows: 1537109
Allocated rows: 1537109
Newly requested rows: 8 (in 1 blocks)
Trigger Location of Runtime Error
Program SAPLRHAC
Include LRHACF04
Row 90
Module type (FORM)
Module Name FILL_SET_TAB
Source Code Extract
Line SourceCde
60 object_tab2-skipf = relat_tab-skipf.
61 object_tab2-pup = rec_check_tab_index.
62 IF rhas-sflag EQ 'X'.
63 PERFORM build_sel_interval
64 USING t1001-begda t1001-endda
65 object_tab-sbegd object_tab-sendd
66 object_tab2-sbegd object_tab2-sendd.
67 ELSE.
68 object_tab2-sbegd = object_tab-sbegd.
69 object_tab2-sendd = object_tab-sendd.
70 ENDIF.
71 APPEND object_tab2.
72 blatt = off.
73 object_tab2_count = object_tab2_count + 1.
74 WHEN '2'.
75 CLEAR object_tab1.
76 MOVE-CORRESPONDING t1001 TO object_tab1.
77 object_tab1-otype = t1001-sclas.
78 object_tab1-objid = t1001-sobid.
79 object_tab1-skipf = relat_tab-skipf.
80 object_tab1-pup = rec_check_tab_index.
81 IF rhas-sflag EQ 'X'.
82 PERFORM build_sel_interval
83 USING t1001-begda t1001-endda
84 object_tab-sbegd object_tab-sendd
85 object_tab1-sbegd object_tab1-sendd.
86 ELSE.
87 object_tab1-sbegd = object_tab-sbegd.
88 object_tab1-sendd = object_tab-sendd.
89 ENDIF.
>>>>> APPEND object_tab1.
91 blatt = off.
92 object_tab1_count = object_tab1_count + 1.
93 ENDCASE.
94 ELSE.
95 exit_sw = on.
96 EXIT.
97 ENDIF.
98
99 ENDIF.
100 ADD 1 TO t1001_index.
101 ENDDO.
102 ELSE.
103 LOOP AT eo_1001 WHERE plvar EQ rhas-plvar
104 AND otype EQ object_tab-otype
105 AND objid EQ object_tab-objid
106 AND infty EQ rela_infty
107 AND rsign EQ relat_tab-rsign
108 AND relat EQ relat_tab-relat
109 AND priox BETWEEN min_priox
Thanks! -
Hi Experts
I have scheduled the CRM_TERRMAN_PROC_REL using INITIAL run to update the territory on accounts. In between INITAL run got failed/cancelled due to error "Internal session terminated with a run time error TSV_TNEW_PAGE_ALLOC_FAILED"..
I have re-run the job using INITIAL again. Again Job ended up with same error.
Is it ok to run job multiple time in INITIAL mode when Job gets failed in between?
What could be the reason for the error Internal session terminated with a run time error TSV_TNEW_PAGE_ALLOC_FAILED"..?
Thanks
ChandCheck if below sap note valid for your release.
1933212 - Dump TSV_TNEW_PAGE_ALLOC_FAILED when running CRM_TERRMAN_PROC_REL
Refer:
1732395 - Memory allocation dump during territory relation processing
2054266 - CRM Territory Relationship Build Program Performance issue -
Report MB5L giving runtime error TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
While running the Report MB5L we are getting the runtime
error "TSV_TNEW_PAGE_ALLOC_FAILED"
We tried to schedule this report at non-peak hours but it again got
terminated with same error.
We are using 12GB of RAM.
ztta/roll_area 6500000
ztta/roll_extension 4000317440
abap/heap_area_total 3001024512
abap/heap_area_dia: 5000683008
abap/heap_area_nondia: 2000000000
em/initial_size_MB: 8192
Please find the attached screenshot of ST22 dump analysis.
Regards,
Prashant
Edited by: Prashant Shukla on Feb 25, 2009 11:10 AMHi Juan,
Pls find the details below-:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.02.2009 23:31:32
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
If the error persists, ask your system administrator to check the
following profile parameters:
Error analysis
The internal table "\FUNCTION=MBEW_EXTEND\DATA=SEARCH_MBEWH_TAB[]" could not be
further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 372
Number of rows: 354608
Allocated rows: 354608
Newly requested rows: 32 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6203136
Extended memory (EM)........... 4001304840
Assigned memory (HEAP)......... 2000059568
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 18446697160833538863
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLMG27" or "LMG27F02"
"SEARCH_EXIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ecprdciclu"
Network address...... "172.25.1.34"
Operating system..... "Linux"
Release.............. "2.6.18-53.el5"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 19
Shortdump setting.... "full"
Database server... "isrecprdb2"
Database type..... "ORACLE"
Database name..... "RPD"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 20:45:39"
create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 185
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 6203136
EM...... 4001304840
Heap.... 2000059568
Page.... 32768
MM Used. 5803144952
MM Free. 199241240
User and Transaction
Client.............. 610
User................ "SANCHIT"
Language key........ "E"
Transaction......... " "
Transactions ID..... "49A289F286FA2313E1000000AC190122"
Program............. "SAPLMG27"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLMG27" - in "SEARCH_EXIT".
The main program was "RM07MBST ".
In the source code you have the termination point in line 558
of the (Include) program "LMG27F02".
The program "SAPLMG27" was started as a background job.
Job Name....... "RM07MBST"
Regards,
Prashant -
Handle Runtime error: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
In my programme, some times I end up with handling of lots of data in internal table. And this results in a dump.
Category ABAP Server Resource Shortage
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more memory available to extend an internal table.
I read few threads where they suggested to increase the internal memory of ths system. This is beyond my scope!
Is there anyway I can catch this exception and stop the programme from executing further?
Thanks in advance!
Cheers
KiranHello Kiran,
TSV_TNEW_PAGE_ALLOC_FAILED is a not catchable error. It happens if a program exceeds the system boundaries, typically ~2 GB. Requesting so much memory is a strong indication for a flaw in the archtecture.
Anyway these kind of errors require a change in the program or in the arguments given to them. In newer releases you may try S_MEMORY_INSPECTOR to analyse the endless need of memory. In older releases watch out for hughe internal tables in the ST22 dump.
Regards
Klaus -
Short dump errors desc--how to resolve
I would like to know the short dump errors meaning and how to resolve it. i have the following errors
1. TSV_TNEW_PAGE_ALLOC_FAILE----
for this the description for ERROR ANALYSIS is : The internal table "IT_24" could not be enlarged further. To allow error handling, the table has to be deleted before this log was created.HOW TO CORRECT THE ERROR is : the amount of storage space was (in bytes) filled at termination time was:
Roll area..........1708928
Extended memory (EM).........440057520
Assigned memory (HEAP).......465813648
short area.........." "
Paging area.....33857536
Maximum address space....." "
2. DBIF_DSQL2_SQL_ERROR----
HOW TO CORRECT THE ERROR is:
Database error text......."ORA-01555: snapshot too old: rollback segment number 2 with name "PRS_0" too small"
Database error code - 1555
Triggering SQL statement......."FETCH NEXT"
Internal call code................"[DBDS / NEW DSQL]"
Please check the entries in the system log (Trasaction SM21)
3. TSV_LIN_ALLOC_FAILED----
this error analysis which also gives HOW TO CORRECT THE ERROR is almost the same like the first error description which i have written like memory space and so on
i would appreciate if u could clarify these errors and how to resolve it. Thanks in advance.Hi,
TSV_TNEW_* error are the memory problems in BI, you need to wait untill the system load is reduced...check the TA: SM37 and then repeat the failed steps, it will be successful.
DBIF_* are database releated errors....oracle backend error, u need to find out where the error has occured in the SQL statement and fix the error.
Usually these errors will the locks.
Oracle 8i error message says:
<u><b>ORA-01555</b></u>
snapshot too old: rollback segment number string with name "string"
too small
Cause: Rollback records needed by a reader for consistent read are overwritten
by other writers.
Action: Use larger rollback segments.
Regards,
Vijay
Message was edited by:
Vijaya Kumar Malyavantham -
Infoset query: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Hi
I have searched the forum and could not find suitable solution for my problem.
We have an infoset query whose data source is an ABAP program and this is within our BW system only. Earlier it used to run perfectly fine. Recently, due to the increasing data, the load for the same is failing because of memory issue with runtime Error TSV_TNEW_PAGE_ALLOC_FAILED . The dump occurs within 5-7 minutes of the data load. Once, we give some more filter selections in the infopackage, it runs fine.
Our problem is neither we can increase the memory any further nor we want to give filter selections in the infopackage. Also, once we execute the ABAP program alone, it runs fine.
Any help to solve this problem is appreciated.
Cheers
ChandaHi,
There are 3 ways to avoid this kind of problem:
1) Reduce the data set - if it is possible to process this in smaller
chunks then please do. This is an infoset query - please be more restrictive in your selections
- please refer to note 354657.
When you work with infosets that use tables or joins then it is
possible to read packages (from Rel. 6.10 on). When you work with
infosets that use logical databases or data retrieval programs than
it is not possible to read packaged - by technical restrictions.
That means that the query is executed completely taking all restrictions
into account and the result is stored internally.
2) Re-allocate some of the unused shared memories to program memory.
A prime candidate for this is Roll and Page "In Memory" values.
Alternative memory management via PHYSMEMSIZE generally overallocates
roll and page memory. Please reduce the amounts allocated to the "in
memory" part (see ST02) using the parameters below, for instance:
rdisp/ROLL_MAXFS....Total amt of ROLL (Filesystem+SHM); in 8KB blocks
rdisp/ROLL_SHM......Shared memory element of Roll; in 8KB blocks
rdisp/PG_MAXFS......Total amt of Page (Filesystem+SHM); in 8KB blocks
rdisp/PG_SHM........Shared memory element of Roll; in 8KB blocks
=>Filsystem amt = MAXFS - SHM
60MB or so each in memory should be sufficient.
This should allow an extra 260Mb or so for process memory.
Bear in mind however that Roll_SHM MUST be greater than 10% of
Roll_MAXFS.
This will not affect alternative memory management operation in any way.
3) Reduce the em/global_area_MB from 128 to 64MB.
These measures should give you ~320MB additionally per work process.
To get even more - if there is a 64 bit machine in the landscape then
redirect the load there.
I would like for you to review the SAP Note 712664. Although
the Notes 20527, 369726 and 166551 specifically refers to this
and has helped resolve multiple performance problems.
I hope it can help you.
Fran. -
Dump error while creating a new page in smartforms URGENT pls!!!
while creating a new page it is showing me a dump error , that the superior program execption was not intercepted , i have even given the next page field also correctly, i have attached a mainwindow to that page and a text element to that . .
thanks
sridharHi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio. -
What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?
hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani -
Hi Everyone,
I'm loading 690k odd records to cube
I am facing short dump error while data request is processed to cube.
In ST22 i'm getting Timeout Error.
Buffer time is set for 10mins to process
Can anyone guide me in this issue.
Thanks in advanceHi,
Due to data volume your load took more than 7hrs. in general time out time is 7hrs. so in your case its may exceeded.
Try to increase time out time for your info package.
Go to your info pack--> menu scheduler --> time out time--> increase 7 hrs to 14hrs and trigger your load again. if its full load delete failed load and retrigger.
Thanks -
Short dump error when using count(*)
Hi Experts
I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
select count(*) from ZINT_TABLE
select count(*) from ZINT_MSGS
select * from zint_data
nto table izint_d2 . "PACKAGE SIZE 20000
where STATUS = 'OK' AND CREATED_ON >= w_date1. " VALUE
endselect.**
report z_eslp_command_records.
data: cnt type i.
data: cnt2 type i.
data: cnt3 type i.
data: cnt4 type i.
DATA:
w_date1 like sy-datum .
DATA:
w_date2 like sy-datum.
data: izint_msgs type table of zint_msgs.
data: izint_data type table of zint_data.
data: izint_m2 type table of zint_msgs.
data: izint_d2 type table of zint_data.
INITIALIZATION.
w_date1 = sy-datum - 30.
w_date2 = sy-datum - 30.
select * from zint_data
into table izint_data PACKAGE SIZE 3000
where STATUS = 'OK' AND CREATED_ON <= w_date1. " ZERO
endselect.
select * from zint_msgs
into table izint_msgs PACKAGE SIZE 3000
where CREATED_ON <= w_date2. " ZERO
endselect.
select * from zint_data
into table izint_d2 PACKAGE SIZE 20000
where STATUS = 'OK' AND CREATED_ON >= w_date1. " VALUE
endselect.
select * from zint_msgs
into table izint_m2 PACKAGE SIZE 20000
where CREATED_ON >= w_date2. " VALUE
endselect.
select * from zint_data
into table izint_data2
where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
select * from zint_msgs
into table izint_msgs2
where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
sort izint_data by created_on ascending.
sort izint_msgs by created_on ascending.
sort izint_d2 by created_on ascending.
sort izint_m2 by created_on ascending.
describe table izint_data lines cnt.
describe table izint_msgs lines cnt2.
describe table izint_d2 lines cnt3.
describe table izint_m2 lines cnt4.
write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
skip.
write:/ '1. Records counted in ZINT_DATA <=current date - 30 :' color 2, cnt color 4.
write:/ '2. Records available in ZINT_DATA >=current date - 30 'color 4, cnt3 color 4 .
skip.
write:/ '2. Records counted in ZINT_MSGS <=current date - 30 :' color 2 , cnt2 color 4.
write:/ '4. Records available in ZINT_MSGS >=current date - 30 'color 4 , cnt4 color 4 .
TOP-OF-PAGE.
WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' Command Interface Data' CENTERED .
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
SKIP.
"FORMAT COLOR COL_HEADING.
ULINE.
FORMAT COLOR 1.
END-OF-PAGE.Answer
Maybe you are looking for
-
Hello, Can Multiple Business systems be associated with one Technical system in SLD and assigned in D ? Regards,
-
Rendering creates blank images
I teach music technology in a school lab. Just yesterday iMovie has given me some trouble. After rendering in Ken Burns the images go blank. I have checked the photos making sure they are jpegs, I have re-imported them into iPhoto, I have directly en
-
Does OPC UA Shared Variable Server support Alarm&Event and historical access?
OPC UA Shared Variable Server is a sample code and resides at https://decibel.ni.com/content/docs/DOC-25602 It seems to support DSC <-> OPC-UA tag synchronization. But does it support alarm&event and historical access? I tried to open it with LabVIEW
-
What is the general problem with this OriginLab VI?
I'd like to use some VIs provided by OriginLab for their graphing and analysis software. They apparently haven't updated their VIs since Labview version 8.5 The attached screenshot is an example of the general problem I'm seeing in their VIs. If I
-
Qosmio F60-10K - Exact drivers or recovery disk
Hello, I have recently purchased this model, however got some problems with HDD and had to fully format it. So Recovery function is lost. Couldnt find exact drivers for this model and as I used drivers I have found under name Qosmio F60, made laptop