Dump error when converting PR to PO

Hi,
My user want to convert from PR to PA it is giving with time out error.
It is happenning in production

hi,
Try using this path:
SPRO --> MM --> Purchasing --> Environment data --> Define attributes of the system message..
Here you maintain message as warning or error, as per ur requirement.
Tx
Uts
Award if helpfull

Similar Messages

Short dump error when using count(*)

Hi Experts
I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
select count(*) from ZINT_TABLE
select count(*) from ZINT_MSGS
   select * from zint_data
             nto table izint_d2 . "PACKAGE SIZE 20000
   where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
endselect.**
report z_eslp_command_records.
data: cnt type i.
data: cnt2 type i.
data: cnt3 type i.
data: cnt4 type i.
DATA:
     w_date1 like sy-datum .
DATA:
     w_date2 like sy-datum.
data: izint_msgs type table of zint_msgs.
data: izint_data type table of zint_data.
data: izint_m2 type table of zint_msgs.
data: izint_d2 type table of zint_data.
INITIALIZATION.
w_date1 = sy-datum - 30.
w_date2 = sy-datum - 30.
select * from zint_data
             into table izint_data PACKAGE SIZE 3000
             where STATUS = 'OK' AND CREATED_ON <= w_date1.   " ZERO
endselect.
select * from zint_msgs
             into table izint_msgs PACKAGE SIZE 3000
              where CREATED_ON <= w_date2.              " ZERO
endselect.
select * from zint_data
             into table izint_d2 PACKAGE SIZE 20000
   where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
endselect.
select * from zint_msgs
             into table izint_m2 PACKAGE SIZE 20000
where CREATED_ON >= w_date2.                            " VALUE
endselect.
select * from zint_data
            into table izint_data2
where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
select * from zint_msgs
            into table izint_msgs2
where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
sort izint_data by created_on ascending.
sort izint_msgs by created_on ascending.
sort izint_d2 by created_on ascending.
sort izint_m2 by created_on ascending.
describe table izint_data lines cnt.
describe table izint_msgs lines cnt2.
describe table izint_d2 lines cnt3.
describe table izint_m2 lines cnt4.
write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
skip.
write:/ '1. Records counted in ZINT_DATA   <=current date - 30                   :' color 2,                        cnt color 4.
write:/ '2. Records available in ZINT_DATA >=current date - 30                   'color 4,                   cnt3 color 4 .
skip.
write:/ '2. Records counted in ZINT_MSGS   <=current date - 30                   :' color 2                 ,                      cnt2 color 4.
write:/ '4. Records available in ZINT_MSGS >=current date - 30                   'color 4 ,            cnt4 color 4 .
TOP-OF-PAGE.
WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' Command Interface Data' CENTERED .
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
SKIP.
"FORMAT COLOR COL_HEADING.
ULINE.
FORMAT COLOR 1.
END-OF-PAGE.

Answer

Error when converting a numeric field to XML

Hi,
When i run the Adobe intractive form,i am getting following exception
"Error when converting a numeric field to XML"
Anyone plz suggest
Regards,
vinoth

Hi Vinoth Raja,
For resolving the following exception
"Error when converting a numeric field to XML"
You have to follow the below link:-
http://www.saptechies.com/error-when-converting-numeric-field-xml/
May be it will help you
Regards,
Sushma Yadav

Error when converting a constant amount MAXBT in T511P

Dear Expert,
I am encounter error as below when run payroll for Macao,
Error when converting a constant amount MAXBT in T511P
CONVERT_TO_LOCAL_CURRENCY has been Called
Data used:
Validity end date: 28.02.2014
Constant: MAXBT
T511P Currency MOP
Currency of payroll driver HKD
Therefor, do the checking on OE00 and check the currency and validity dates for MOP currency.
Also, checked table V_T001 table the currency that assigned for the company code.
Checked the MOP currency and ISO code in V_TCURC table. And checked ISO code in V_CURC table as well.
Still encounter error as above, appreciate you advice.
Thanks,
Mel

What are the values for :
Country grouping for PA/PSA:
Currency appearing in IT0008:
Country key in IT0006:
Bank Country in IT0009:

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

Error when converting time stamp in date time time zone CST in IC

Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
Teja

Hi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon.

GR224 Report Painter: Internal error when converting a report

Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna Scamardella

HI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian

Error:-"Internal error when converting a recurrence documentu201D

Hello ISU Experts,
For customer I am trying to create a new BBP with transaction EA61. This is done without any errors until I try to save the new BBP. Then I receive the following error:
u201CInternal error when converting a recurrence documentu201D
Kindly help me in resolving this issue so that customer can receive their BBP.
Thanks in advance
Shabnum

Hello,
Have you tried to do a note search for error >4011 "Internal error in converting a repetition document"
Here are some I found......please see which is relevant for your system and implement them...
367152
131335
410434
571098
561664
569037
566972
402934
565100
155572
153495
553711
203706
183259
170406
182403
619942
700304
855780
214947
I hope this helps...
Regards
Olivia

Timeout error when converting PDF to Word

Is anyone available? I have a time sensitivity project - that would be simple for most folks...Need a question answered

Hi Sara,
my PDF cannot be read by Adobe after all. I have tried with one page but
it still cannot read it. I would like to return the programm because it
doesn't help to solve my task. Please be so kind and advice how I can
return it because I will not use it.
Kind regards,
Marie Schechter
Am 09.06.2014 19:35, schrieb Sara.Forsberg:
>
Timeout error when converting PDF to Word
created by Sara.Forsberg
<https://forums.adobe.com/people/Sara.Forsberg> in /Adobe ExportPDF/ -
View the full discussion
<https://forums.adobe.com/message/6444999#6444999>

-3 error when converting music

I keep getting a -3 error when converting m4a into another AAC/mp3
Does anyone know what this is? Or why it is happening?
It's using itunes10.6
Thanks

HI Scott,
Perhaps something here might help: iTunes: How to convert a song to a different file format
Carolyn

Dump error when clicked on text elements in SAP Script window

Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category               ABAP Programming Error
Runtime Errors         DATA_LENGTH_TOO_LARGE
Except.                CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program           SAPLSTXK
Application Component BC-SRV-SCR
Date and Time          30.04.2014 20:00:08
Short text
     Invalid partial field access: Length is too large
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
      caught in
     procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
    The reason for the exception is:
    In the executed program "SAPLSTXK", the system attempted to access the field
    "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
    However, a partial field access with a length specification that is
    larger than the field length is not allowed.
How to correct the error
    Reduce the length used to access the field.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
    "SAPLSTXK" or "LSTXKFRN"
    "TOKEN_COMMENT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938       if g_tm_open    eq true or     " Section
2939          g_tm_b_close eq true.
2940         l_token = '\chcbpat0'.
2941         l_len = strlen( l_token ).
2942         token_control = true.
2943         assign l_token to <itf1>.
2944         perform put_itf1_new using l_len.
2945         perform token_line_begin changing l_next_token.
2946       else.                          " without section
2947         concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948         l_len = strlen( l_token ).
2949         token_control = true.
2950         assign l_token to <itf1>.
2951         perform put_itf1_new using l_len.
2952       endif.
2953     elseif l_next_token-code eq ')L'.         " \par
2954       l_token = '\par'.
2955       l_len = strlen( l_token ).
2956       token_control = true.
2957       assign l_token to <itf1>.
2958       perform put_itf1_new using l_len.
2959     elseif l_next_token-code eq '(C' or       " \par + format
2960            l_next_token-code eq ')C' or
2961            l_next_token-code eq '(&' or
2962            l_next_token-code eq 'TA' or
2963            l_next_token-code eq 'SC' or
2964            l_next_token-code eq 'ST'.
2965       concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966       l_len = strlen( l_token ).
>>>>>       itf_token(l_len) = l_token.
2968       token_control = true.
2969       assign l_token to <itf1>.
2970       perform put_itf1_new using l_len.
2971     endif.
2972
2973 * Step 7: (L to disarm
2974   if g_compose eq true and
2975      l_next_token-code eq '(L'.
2976     perform read_next_itf_token(rstxscan) using p_token.
2977   endif.
2978
2979 ENDFORM.                    " token_comment
2980 *&---------------------------------------------------------------------*
2981 *&      Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 *       add default language to rtf
2984 *----------------------------------------------------------------------*
2985 *      -->P_HEADER text
2986 *      <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
Rekha

Hi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel

Error when converting a 1602i to Autonomous

Hi all... just looking for a little help. I'm trying to convert a 1602i to an Autonomous OS.
I downloaded: ap1g2-k9w7-tar.152-2.JB.tar
Performed the following:
1.) Set PC LAN address to 10.0.0.5
2.) Start TFTP Server and point to folder holding the Autonomous IOS.
3.) Set timeout to 30 seconds
4.) Made a copy of the IOS and renamed it to: "ap3g2-k9w7-tar.default"
5.) Connect AP Ethernet port to Laptop LAN port using a Cat5 cable.
6.) Reset AP power holding the MODE button until the LED blinks Red (~20seconds) and then release the button.
The AP reloaded, and started downloading the IOS from the tftp....
Then I get the following message: (a lot of additional extraction messages I didn't paste)
extracting ap1g2-k9w7-mx.152-2.JB/html/level/15/ap_system-sw_sysconfig.shtml.gz (7145 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/html/level/15/ap_stationview-client.shtml.gz (5554 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/html/level/15/ap_contextmgr_ap.shtml.gz (4774 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/html/level/15/ap_contextmgr_scm.shtml.gz (5294 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/html/level/15/ap_contextmgr_scm-groups.shtml.gz (7511 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/html/level/15/ap_contextmgr_scm_summary.shtml.gz (5061 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB (9206971bytes)..........................................................................................................................................................................
Premature end of tar file
ERROR: Problem extracting files from archive.ap:
I've performed this on 2602 without any issues... and we have tried doing the tftp in romon...
ap: tar -xtract tftp://10.0.0.5/ap1g2-k9w7-tar.152-2.JB.tar flash:
Same result... went back to Cisco.com and downloaded the file again and tried again, same result.
Any help would be greatly appreciated.
Rich

I've tried both processes multiple times and have finally gotten to what appears to be the end. However after I reset the AP, I get an error when the AP starts loading the IOS from flash.
xtracting ap1g2-k9w7-mx.152-2.JB/S5.bin (106106 bytes).......................
extracting ap1g2-k9w7-mx.152-2.JB/K2.bin (5830 bytes).
extracting ap1g2-k9w7-mx.152-2.JB/K5.bin (75790 bytes)................
extracting ap1g2-k9w7-mx.152-2.JB/info (277 bytes)
extracting info.ver (277 bytes)ap:
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 183 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 10417152
flashfs[0]: Bytes available: 21580800
flashfs[0]: flashfs fsck took 17 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 6c:41:6a:98:05:73
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB"...uncompress: Unknown mzip segment type: 2
Error loading "flash:/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Compiled Wed 30-May-12 03:34 by binugopa
ap:

Dump error when posting through F-02.

Greetings everyone,
When posting G/L act through F-02 we are facing a dump error in QUALITY system and in DEVELOPMENT we are able to post succesfully.
From my primary analysis one standard program is calling and that program has syntax error.
When i checked that program it is saved in local object and generated automaticaly when some thing done is FICO.
Generated Program is Module pool program :GBTV6FI0
Description of that program is below
Generated by report RGUGBR01.
Generated code used by validations substitutions and rules.
!! Do not manually change or transport !!
For reference please find the dump below
    Error in the ABAP Application Program
    The current ABAP program "SAPLGBL5" had to be terminated because
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "GBTV6FI0 " in in
     " in
    line 519:
    "FORM "SEND_CMPLX_DATA_015" does not exist"
    The include has been created and last changed by:
    Created by: "DDIC "
    Last changed by: "****"
    Error in the ABAP Application Program
    The current ABAP program "SAPLGBL5" had to be terminated because
    come across a statement that unfortunately cannot be executed.
Can any one please suggest me how to resolve this issue.
Thanks in Advance.

This looks like you have not transported the code to quality system. This code seems to have been generated when validation, substitution and rules have been defined and is missing in quality system (not transported ?)
Find the form send_cmplx_data_015 in development system and check the version. This is the transport that still needs to be transported to quality system.
I now see that you say it has been saved as local object. In that case assign it to a package and transport in SE80.
And now I see the answer of Klaus, follow the instructions in the note he has supplied first. It seems that note is exactly describing your problem. :-)

Error when converting form to XML

I get this error when trying to convert a form using this method:
frmf2xml.bat OVERWRITE=YES AvaAcPt.fmb
Oracle Forms 10.1.2 Forms to XML Tool
Copyright(c) 2001, 2005, Oracle. All rights reserved.
Processing module AvaAcPt.fmb
WARNING: Invalid value (100) for property DataType on object OK.
WARNING: Item CURR_CODE - all ListItemElements must have an Index, Name and Value.
WARNING: Invalid value (100) for property DataType on object OK.
WARNING: Invalid value (100) for property DataType on object INACTIVECUSTOMER.
WARNING: Invalid value (100) for property DataType on object OK.
XML Module saved as AvaAcPt_fmb.xml
The WARNING: Item CURR_CODE - all ListItemElements must have an Index, Name and Value. is obvious. It a list is empty this warning is thrown out. Of course my concern is when we do the XML to Forms conversion later will the list item and associated code be reconstructed correctly?
As for the 3 OK buttons and the INACTIVECUSTOMER button the converter puts a DataType attribute, which is meaningless to a button.
I tried to find any peculiarities with the buttons but could not find any.
Has anybody else experienced this problem?

Hi,
I have got the same warning “ all ListItemElements must have an Index, Name and Value” when converting form from fmb to xml using frmf2xml.
Have you find any course of this and how to fix it?
Thanks!

Unknown error when converting to mp3

I am trying to convert a track I just downloaded from the itunes store to an mp3. I have done this many times and I know how to do it. Except now when I select to convert to mp3, I get "Itunes Unknown Error (-3)". When I try to convert to one of the other options, it just gives me the first 15 seconds. But what I really need is the mp3.
Stefan

I too have been getting this error when attempting to convert a newly purchased song to mp3. This has only started happnning recently in iTunes 10.6.3.25. It turns out that this happens when the newly purchased songs are not complete. The real problem seems to be with downloading new songs form iTunes Store. iTunes reports a successful and complete download, but when I go to play the song, only 30 seconds to a minute of audio exist. It has been occurring so frequently, that I will not purchase another song until the problem is fixed.

Dump error when converting PR to PO

Similar Messages

Maybe you are looking for