Dump error while creating a MDT wtih Category CRMNEWCONTRACT

Hi,
We were not able to create a new MDT with category CRMNEWCONTRACT .
System is giving a dump
like "SAPSQL_ARRAY_INSERT_DUPREC " when we try to save the
template .From our inital analysis we found that there were few blank
nodes that are appearing by default and when we are trying to save
the template ,these blank entries are considered by the system as duplicate entries with the same key while making an INSERT into table EPDPRODH ,thereby throwing the aforesaid dump.. the reason for blank nodes in category CRMNEWCONTRACT is unknown.
Thanking you in advance.
Previously also a thread was posted on this. But the issue is still unresolved. Please help us to resolve this.
Thanks&Regards
Ananya Mukherjee

Please check these table once. Check any dublicate entries are there in these tables.
EPDPROD
EPDPRODT
EPDPRODH
EPDPRODHT
EPDPRODA
EPDPRODIDSEL.
When u are saving MDT this method will trigger : IF_ISU_PROD_NODE_TOP_CUST~SAVE keep break point here and try once.
Please let me know if you want any more information on this.
Regards,
Siva

Similar Messages

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Error while creating fields in the Category Structure Urgent

Hii,
I am getting the Error while creating the Category structure fields
Error Message : Entry YF_COU does not exist in CABN - check your entry
Message no. 00058
Diagnosis
Input values must be defined in Table CABN. The value or values 'YF_COU ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Please help me in this error
Regards,
Kumar

Hii,
I have assigned the Characteristics group /AFS/SAP_C to the characteristics but still i am getting the error when i assign the Char Field under the Category Structure.
I have manually created the Characteristics Group AFS characteristics for categories. Is this will automatically updated or while installing the Add On.
Please explain of the Configuration related to the Category Structure.
Regards,
Kumar

Dump error while creating a new page in smartforms URGENT pls!!!

while creating a new page it is showing me a dump error , that the superior program execption was not intercepted , i have even given the next page field also correctly, i have attached a mainwindow to that page and a text element to that . .
thanks
sridhar

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

ABAP short dump error while creating an invoice

Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
Manjunath

Hi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna

Dump error while creating Invoicing document

Moderator note - this is the same problem as identified in thread Error is generated in Print workbench function ISU_INV_BILL_PREPARE. Thread locked and poster notified of rules violation.
Hi Experts,
I am new to ISU application.Please provide solution for below mentioned dump error.
The error is generated in Print workbench function ISU_INV_BILL_PREPARE which is called from application form IS_U_BILL (/1PWB/SAPL20020100218092657) when I'm trying to generate invoice for the bill in EASIBI.
Error analysis
Short text of error message:
Unexpected ELSE case: field sy-subrc with value 0 (/1PWB/200201002180926
57 )
Long text of error message:
Something has occurred in a CASE or IF construct which the
developer did not expect, or which is not permissible here.
System Response
Procedure
Note the field name and field value from the message as well as the
data pattern which lead to the error. Create a problem message.
Technical information about the message:
Message class....... "E9"
Number.............. 898
Variable 1.......... "sy-subrc"
Variable 2.......... 0
Variable 3.......... "/1PWB/20020100218092657"
| Variable 4.......... " "
Thanks in Advance.
Vaseem
Edited by: William Eastman on Mar 9, 2010 2:34 PM
Edited by: William Eastman on Mar 9, 2010 2:36 PM

Hi Experts,
Please reply..... It's very important.
Thanks
Vaseem
Moderator note: DO NOT beg for answers, or suggest that you need an immediate reply. Read the rules of engagement here Research Resources and Rules of Engagement
Edited by: William Eastman on Mar 9, 2010 2:24 PM

Dump Error while creating Business Partner in FPP1

Dear Experts,
I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
**Error in the ABAP Application Program**
**The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be terminated because it has come across a statement that unfortunately cannot be executed.**
**The following syntax error occurred in program "SAPLES02 " in include "LES02U14 " in line 30:**
**"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
Could anyone help me to resolve this issue.
Thanks in Advance,
Regards,
Aswin

Hi,
Please don't go adding fields. Aren't we talking about SAP-standard structures here?
Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
cheers
Paul Bakker

Error while Creating cost element under category 90

Dear Experts,
I have some Balance Sheet related G/L account, which I have created as cost element through transaction KA01, system gives an info message saying its an BS related account, if I ignore that message and proceed further it creates a Cost element with category (system automatically picks the category and the field gets into gray mode) 90.
We have created one more BS G/L account today and trying to create the cost element for the new G/L account, system is producing an error message:
G/L account 3200220 is a balance sheet account
Message no. KS036
Field status group     R005     Material accounts is maintained
Can some one guide me to rectify this error?
Thanks in advance,
Regards,
Praveen

Hi,
The use of cost element category 90 is only provided
in the following two cases (note Note 75980):
1. asset acquisitions and down payments which are
   assigned directly to a fixed asset or asset under construction can
   be assigned to an account on internal orders or WBS elements
   statistically.
2. cost elements of category 90 can also be created
   for material stock accounts to display material make-to-order stocks
   on sales orders or customer projects.
If you G/L account does NOT correspond to the standard cases 1) or 2),
you can (on your own responsibility)
both deactivate the account assignment
check in the CO interface (message KI098) and when you create cost
elements (message KS036). Both checks are deactivated by maintaining
Transaction OBA5. Deactivate message KI098. Message KS036 cannot be
deactivated directly with Transaction OBA5 - rather, it is deactivated
indirectly when you deactivate message KI098.
The message must be DE-ACTIVATED. Please do not set it to any other
type. Please proceed as follows:
Please call OBA5 in the production system - if not set to changeable
please do this in Your development system.
In OBA5 choose KI and in the detail screen add 098.
Then set the type of warning to "-".
Best regards,
MLM

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

Error while creating Structure

I am getting an error while creating a Structure.
After filling the required fields in Components tab and Currency/Quantity filed tab, when activated it says "Warnings Occurred during activation" "Do you want to see the log?"
when i click "yes", it displays
TABL ZABC Activated
Check Table ZABC (SAPUSER .........)
ENHANCEMENT CATEGORY FOR TABLE MISSING
ENHANCEMENT CATEGORY FOR INCLUDE OF SUBTYPE MISSING
TABLE ZABC WAS CHECKED WITH WARNINGS
Thanks

hi,
You are getting these warnings because you have not assigned an enhancement category to your structure .
Try to assign a enhancement category for the structure .
1. open the structure in change mode .
2. then Extras -> Enhancement Category and choose an enhancement option .
3. save and activat ethe structure .
4. Your structure wil be activated now without any warnings .
Regards ,
Lokesh

Error while creating "RETURNS" as ERP Sales transaction type

Description: We are getting error while creating ERP SLO type "Returns-ZRE". Message prompts as "Creation of ERP Transaction failed". We do not get the message for other order types for example "Standard order".
Please suggest. Please note that this is an ERP sales order in CRM UI not a CR< sales order.
Thanks
Shree

Is this only for a particular order type?
As stated above this can be to do with user authorisations or the trusted RFC set up. Some things to check are:
- ST22 dumps in ECC
- ST01 authorisation trace for the user in ECC
- Trusted RFC connection set up

Error while creating pourchase order

I am getting following error while creating PO
Account assignment mandatory for material 000000000000001335 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category.
Please help
Regards
Ranjeey

hi,
As you are mentioning Material Type is -HAWA
Hawa material will have Valuation class as -Trading material
If we have Not ticked -Value and Qty updating for the HAWA material type then eventhrough we maintain Accounting Views. -In configuration
We get the error as a account assignment cat mandatory.
Please maintain Qty and Value update Tick then you can create PO
with regards
Shrinivas gangoor

Error while creating interest rate instrument-Tcode-FTR_CREATE.

Error while creating interest rate instrument-Tcode-FTR_CREATE.
Thanks
Vikas

Hi Tushar
Please maintain the detail in TPM 32
Product category
Product type
General valuation class
Account assignment reference
Regards

Dump error while creating a MDT wtih Category CRMNEWCONTRACT

Similar Messages

Maybe you are looking for