Dump error while going for a change mode in MIR4 for parked document

Hi All,
After doing some GR and MIRO for one PO, there was some GR qty was left and I have parked new invoice document in MIRA. If I go for change mode MIR4 for the same parked document it is going to dump error as message type unknown, saying entry is not maintained table TTXD for Tax procedure. This table indicates that Tax jurisdiction, but we are not maintaining the Tax at Jurisdiction level. I found that user has activated calculate tax in MIRA and posted with some amount, here system will not calculate the tax in Tax field because base amount is not there to calculate, so that field shows "zero". For the same parked document in MIR4 I can see some lines which has value 0 in amount & quantity(already cleared GR's for the same PO) and also GR lines.
Can anyone tell me how can I solve this dump error, I want to delete the parked document in legal way.
Regards
Shanu

Hi Shanu,
Please extract complete dump error by T code ST22 and take a help of your ABAP Team for an analyse the possible cause of dump and also check the relevant note for resolving this dump error.
Regards,
Santosh

Similar Messages

Getting Error While Going For Print Preview in ALV Report

Hi,
We doveloped a new report based on client requirment while going for print preview all the fields are shufling.Can you please guide me I am unable to solve this problem.
Regards
Suresh

Do you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.

Error in Workflow for Parked Document (FV60)

Hi Workflow Experts,
I have a FI document parking Workflow scenario which is 3 level release that is if the amount is upto 10000 first person will release if it's more than that upto 20000 then second user has to release ,if more than that then third user will post.
For this i have activated the main workflow WS10000051 and for two level release i have activated the sub workflows WS10000052 for first level release and WS10000053 for secondlevel release and WS10000054 for thirdlevel release.
I have also done the Release strategy configuration in SPRO such as
in the following SPRO steps
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of CEO created in HR to this)
Now when the document is parked it throws the error
Error in workflow Customizing for document parking (tranasction OBWE) and it stops in the step Determining Sub Workflow.
Has anyone come across this issue.Please guide me in resolving in this issue, i am not able to identify whether this error is happening in workflow or due to some missed entries in SPRO settings of FI.
So please provide me how to do settings in SPRO For Parking, mainly in Tcode OBWE.
Regards,
Sagar

Hi,
Your question is exactly same as below.
[Re: Error in FI Document Parking Workflow;
Hope you 've gone thru this link already, if not, pl. go thru the above link. Also, give us more details on the error you see on the wflow log, like you are not getting any wflow template ID in the cont.element "&ACTIVITY_000043_TASK&", This should have either WS10000052, 53 or 54 depending on the Amt. level. See if you are getting any value here. If not, then there is somethign wrong in your OBWE settings.
Also, sometimes, even though this step of "Determe Subworkflow" step works fine, if there is no proper agent assignment, then also, it cannot create work item for next step of Sub wflow and hence will error out.
Pl .check the above. May be a detailed error message from wflow log would help us out in suggesting better.
Goodluck
venu

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Dump error while running termination action

I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors         SYNTAX_ERROR
Date and Time          21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
     Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
      include "LCACS_BU_PARTNERU44 " in
     line 19:
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
     "r such tables in a Unicode context."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     The following syntax error was found in the program SAPLCACS_BU_PARTNER :
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program                                 SAPLBUD_CHECK
Include                                 LBUD_CHECKF01
Row                                     1.129
Module type                             (FORM)
Module Name                             RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1   CALL FUNCTION 'BDT_TBZ1F_GET'
2     EXPORTING
3       iv_objcn = gc_objcn_bupa
4       iv_objap = gc_objap_bupa
5     TABLES
6       et_tbz1f = lt_tbz1f
7     EXCEPTIONS
8       not_found = 1
9       OTHERS    = 2.
0   READ TABLE lt_tbz1f INDEX 1.
1   IF sy-subrc = 0.
2     CALL FUNCTION 'BUP_PARTNER_GET'
3       EXPORTING
4         i_partner    = is_but100-partner
5         i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS       = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE     ztpkt = 'RLDEL'
             AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner        = is_but100-partner
i_partnerguid    = ls_but000_int-partner_guid
i_role           = is_but100-rltyp
i_dfval          = is_but100-dfval
i_calltp         = iv_calltp
i_valid_from     = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to       = is_but100-valid_to_dats
i_valid_to_old   = iv_valid_to_old
PORTING
e_result         = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result.                          "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -

HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik.

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

RMAN-10011: synchronization error while polling for rpc 8, action=startdefa

Could anybody explain what is this error message caused by?
TIA
The entire spool below:
051107064744: NetBackup RMAN Backup Started
ORACLE_SID=db02
backup_type=cold
number_of_channels=2
Started by: Oracle
051107064745: Checking database status
051107064745: Database status: OPEN
051107064745: Getting database password
051107064746: Checking database password
051107064746: Database password: Valid
051107064746: Checking Database mode
051107064746: Database mode: NOARCHIVELOG
051107064746: Shutdown no archive
051107064838: RMAN BACKUP STARTED
Recovery Manager: Release 10.1.0.4.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: db02 (DBID=3504436532)
RMAN> connect catalog *
2> run
3> {
4> sql 'alter session set sort_area_size=12582912';
5> sql 'alter session set sort_area_retained_size=1048576';
6> allocate channel t1 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
7> format 'df_%d_%p_%u_%t';
8> set limit channel t1 maxopenfiles=1;
9> allocate channel t2 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
10> format 'df_%d_%p_%u_%t';
11> set limit channel t2 maxopenfiles=1;
12> backup database filesperset=64
13> include current controlfile;
14> sql 'alter database open';
15> release channel t1;
16> release channel t2;
17> }
18>
connected to recovery catalog database
starting full resync of recovery catalog
full resync complete
sql statement: alter session set sort_area_size=12582912
sql statement: alter session set sort_area_retained_size=1048576
allocated channel: t1
channel t1: sid=160 devtype=SBT_TAPE
channel t1: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
allocated channel: t2
channel t2: sid=159 devtype=SBT_TAPE
channel t2: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
Starting backup at 11-MAY-07
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00005 name=/oradata/10gid/u01/grid102/grid102/mgmt.dbf
input datafile fno=00006 name=/oradata/10gid/u01/grid102/grid102/mgmt_ecm_depot1.dbf
input datafile fno=00007 name=/oradata/10gid/u01/grid102/grid102/system02.dbf
input datafile fno=00004 name=/oradata/10grid/u01/grid102/grid102/users01.dbf
channel t1: starting piece 1 at 11-MAY-07
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
input datafile fno=00008 name=/oradata/10ggrid/u01/grid102/grid102/mngmecm02.dbf
input datafile fno=00001 name=/oradata/10ggrid/u01/grid102/grid102/system01.dbf
input datafile fno=00002 name=/oradata/10ggrid/u01/grid102/grid102/undotbs01.dbf
input datafile fno=00003 name=/oradata/10ggrid/u01/grid102/grid102/sysaux01.dbf
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_19ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:06:05
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
including current controlfile in backupset
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_1aihed24_622277700 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:00:35
channel t1: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_18ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t1: backup set complete, elapsed time: 00:06:48
Finished backup at 11-MAY-07
Starting Control File and SPFILE Autobackup at 11-MAY-07
piece handle=c-3404436532-20070511-00 comment=API Version 2.0,MMS Version 5.0.0.0
Finished Control File and SPFILE Autobackup at 11-MAY-07
sql statement: alter database open
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10010: error while checking for RPC completion
RMAN-10011: synchronization error while polling for rpc 8, action=startdefault
Recovery Manager complete.
051107065708: RMAN BACKUP FAILED, RMAN exit status=1
051107065708: Cleaning log file (removing passwords)
051107065709: Error Log Check
051107065837: Rman Stat Generator
051107065956: Backup Html Generator
051107065956: NetBackup RMAN Backup Finished
######################################################

Check on metalink:
RMAN-10011: synchronization error while polling for rpc 3, action=startdefault
Note:429572.1
Werner

Error while registering for index relevant events: Invalid RID: No reposito

Hi,
I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am monitoring the application log, I see the error Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied for the IndexmanagementService.
When I see the queue status, the queue status is always idle, even after I activate the queue.
In the indexing monitor, I see the error Trex: Preparation failed: index operation
could anyone tell me what could be wrong?
Thanks,

Hi Christian,
thanks for your reply.
we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
regards
Yao

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

Mass Change for Parked documents in FBL1N

Hi Friends,
Please help me on the following client requirement...
When the user wants to do the mass change (eg..payment block remove) for parked documents in FBL1N transaction, he is getting the error "Unable to change every document".
System Response
The items from the documents not changed are marked in red.
Procedure
You can display a change error log for each of these items (function in application toolbar). In the individual document change procedure you can check which fields are changeable and change the documents individually if necessary.
Kindly respond.
Best regards...

The error message is self explanatory.
You are trying to change fields which are not changeable. You view the change error log. Rectify the errors and try again.
Else you can try FBV2 to view list of documents and change individually.
Rgds
Harmees

Customizing settings for parked document for edit lock while in workflow

Hi all,
I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
Thanks

Hi,
Please read note 169732.
It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
regards
Waman

Message check for parked Document

Hi All,
In Funds Management I have a scenario in which budget check is activated for parked documents.
When documents are parked with values less than the budget, information/ warning message is to be raised.
I could see that the standard functionality is not providing the error message when the amount exceeds the budget
while parking the document. However the system is not allowing to park the document.
Is there any way in which there is error message while parking the document when budget is exceeded.
Regards,
Karthik

Hi,
I'm afraid your message is completely confused.
When documents are parked with values less than the budget, information/ warning message is to be raised.
Less? Why would you need a message if document value is less than the budget?
I could see that the standard functionality is not providing the error message when the amount exceeds the budget while parking the document. However the system is not allowing to park the document.
So, is the parking allowed or not?
Regards,
Eli
P.S. Please, keep in mind that parked document is considered for PSM-FM, only when it is completed.

Customizing setting for parked documents of edit lock which are in workflow

Hi all,
I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
Thanks

Hi,
Please read note 169732.
It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
regards
Waman

Create workflow for parking document

hiiii all
can any one tell me in detail, what is the function of creation of work flow for parking document? and how do i configure? and how do i assign with user? please help
menu path :- financial accounting global settings - document - document parking - create workflow for parking document
regards
rajesh
Moderator: Please, search before posting. These are standard WF functionalities of SAP. If you have particular question about WF, please ask it on a proper forum

Hi,
Are there any special settings for SUBWORKFLOWS
There is no Special Setting for Sub Workflow.
Only error which i get in my inbox is
Please repair the suspended workflow
1) Once you get the Error, open a new session goto T.code SU53 and see any authorization issue
If Yes, send the screen shot to Basis Team to get the authorization.
2) If Authorization is fine, Check the binding for that Workitem Regenerate and Test it . Also Check the Workflow log and see which step error is showing, then see the Step history comments. .
Regards,
Surjith

Workflow for Parked Document (FV60)

Hi,
Can anyone tell me which workflow to be used for Parked Documents. The tcode is FV60. And I want to know what are all the settings have to be done in SPRO tcode. Can anyone provide me step by step procedure??
I think there are some 5 workflows : WS100000051,52,53,54,55.
I've to config for 6 Approvers. So which one can I use???

Hello Gurus,
Do anyone know what are all the settings have to be done in SPRO tcode. I've done some settings in which work item goes to the users which i've assigned at the same time. I need it to go one by one approved....
I want to know whether I should use only one approval path ?
In Assign Release Approval Procedure for Parking Document, do i need to give only one entry or 6 entries as i'm using 6 approvals. And the amount column in that is total amount or the amount for single release??
can anyone help me out in this ???

Dump error while going for a change mode in MIR4 for parked document

Similar Messages

Maybe you are looking for