Dump EXPORT_TABLE_UPDATE_CONFLICT occurred during setup of statistical data

Hi Experts,
I scheduled the run of statistical data setup for SD-Sales Orders.
But the following Dump screen has occurred:
Runtime Errors         EXPORT_TABLE_UPDATE_CONFLICT
Date and Time          09.09.2011 10:03:09
ShrtText
     Problems found during the EXPORT to specified key in table.
What happened?
     Error in ABAP application program.
     The current ABAP program "SAPLMCEX" had to be terminated because one of the
     statements could not be executed.
     This is probably due to an error in the ABAP program.
Error analysis
     The table "MC11VA0SCLSETUP " does not contain any data records with the
      specified key.
     The system called the internal SAP database interface because it
     expected to find such a key.
Any idea or suggestion please?
before this run, i ran setup for SD-Billing Doc, it has completed successfully without errors.
Any help is greatly appreciated.

RMCSBWCC returned:
Struct. appl. 11 cannot be changed due to setup table -> Long text
Message no. MCEX141
Diagnosis
Changing the extract structure MC11VA0SCL for application 11 is not permitted, because the restructure table MC11VA0SCLSETUP for the extractor still contains data in 300.
You cannot change the structure in this status, because when you load an InfoPackage from BW, this leads to errors.
Procedure
Delete the entries for all restructure tables for application 11.
I could not find RMCEXCHK under SE38

Similar Messages

Errors occurred during the extraction - CRM Data Source

Hello Experts
I am working on CRM Datasource 0CRM_SRV_PROCESS_H, when I tried to run the infopackage for Init I am getting short durmp, for "MESSAGE_TYPE_X" " "SAPLRSATREE" or "LRSATREEF28" "RSATREE_START_ACTIVATION" and says Source Sytem Error in the Log. To cross verify I tried RSA3 Extract checker, I found error "Errors occurred during the extraction. This is happening in Production System, whereas same is working in Dev perfectly.
Basically, I am using a BI intance within Solution Manager System. Need your help urgently.
Regards
Aftab

HI,
Can you check the whether the source system connection is active by going RSA1>Source system Tab>Right click on the CRM source system-->Check if the connective is acyive?
check whether already init has been done or what.If you have transported the infopackage also.please go into the infopackage cheduling screen in the scheduler tab check intialisation to the soirce system.whether there is any request.if it is there try to do delete the request or if u cant under stand this in the info package scheduling screen in the updae checkare you able to see delta option
Let me know if it works.
Cheers,
Vikram

Logs for setup of statistical data

Dear Friends,
I am Performing Setup - SD Sales Orders i.e filling up of set up tables for 2LIS_11_VAITM, using t-code OLI7BW.
After I fill up the required feilds and execute the same I get a message "DataSource 2LIS11_VAHDR contains data still to be transferred Message no. MCEX024"_.
I used t-code NPRT where the list of logs are displayed, including my current log.
I understand that unless all the previous logs are deleted or transferred my setup table will not be filled up.
How do I carry out the necessary steps so to complete the transaction?
Yours Truly
KS

Hello,
Do the following:
1. Run V3 job and run loads in BW. Repeat this process 2 to 3 times.
2. Delete setup tables.
3. Delete queue in SMQ1 and RSA7.
And now you can try.
Regards,
Shashank

An error occured during the generation of data service

com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK.
It is currently set to "E:\OraHome_2\jre\1.4.2"
 at com.sunopsis.dwg.dataservices.JavaCompiler.c(JavaCompiler.java)
 at com.sunopsis.dwg.dataservices.AbstractWSGenerator.b(AbstractWSGenerator.java)
 at com.sunopsis.graphical.b.b.a(b.java)
 at com.sunopsis.graphical.b.b.a(b.java)
 at com.sunopsis.graphical.b.a.h.actionPerformed(h.java)
 at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
 at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
 at java.awt.Component.processMouseEvent(Unknown Source)
 at java.awt.Component.processEvent(Unknown Source)
 at java.awt.Container.processEvent(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Window.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)

ok i got it i for got to give data source name...again i got one more error..
com.sunopsis.tools.core.exception.SnpsRuntimeException: com.sunopsis.core.SnpsInexistantObjectException: SnpPschemaCont.getObjectByIdent : SnpPschema does not exist
 at com.sunopsis.dwg.dataservices.AbstractWSGenerator.k(AbstractWSGenerator.java)
 at com.sunopsis.dwg.dataservices.AbstractWSGenerator.a(AbstractWSGenerator.java)
 at com.sunopsis.dwg.dataservices.WSGenerationTask.a(WSGenerationTask.java)
 at com.sunopsis.graphical.b.c.b(c.java)
 at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
 at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
 at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
 at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
 at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
 at java.lang.Thread.run(Thread.java:595)
Caused by: com.sunopsis.core.SnpsInexistantObjectException: SnpPschemaCont.getObjectByIdent : SnpPschema does not exist
 at com.sunopsis.dwg.dbobj.SnpPschema.getObjectByLSchemaNameAndContext(SnpPschema.java)
 at com.sunopsis.dwg.dbobj.SnpPschema.getSnpPSchemaCont(SnpPschema.java)
 at com.sunopsis.dwg.snpreference.c.a(c.java)
 at com.sunopsis.dwg.snpreference.c.a(c.java)
 at com.sunopsis.dwg.snpreference.c.<init>(c.java)
 at com.sunopsis.dwg.codeinterpretor.g.a(g.java)
 ... 10 more
Caused by:
com.sunopsis.core.SnpsInexistantObjectException: SnpPschemaCont.getObjectByIdent : SnpPschema does not exist
 at com.sunopsis.dwg.dbobj.SnpPschema.getObjectByLSchemaNameAndContext(SnpPschema.java)
 at com.sunopsis.dwg.dbobj.SnpPschema.getSnpPSchemaCont(SnpPschema.java)
 at com.sunopsis.dwg.snpreference.c.a(c.java)
 at com.sunopsis.dwg.snpreference.c.a(c.java)
 at com.sunopsis.dwg.snpreference.c.<init>(c.java)
 at com.sunopsis.dwg.codeinterpretor.g.a(g.java)
 at com.sunopsis.dwg.dataservices.AbstractWSGenerator.k(AbstractWSGenerator.java)
 at com.sunopsis.dwg.dataservices.AbstractWSGenerator.a(AbstractWSGenerator.java)
 at com.sunopsis.dwg.dataservices.WSGenerationTask.a(WSGenerationTask.java)
 at com.sunopsis.graphical.b.c.b(c.java)
 at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
 at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
 at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
 at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
 at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
 at java.lang.Thread.run(Thread.java:595)

Log for setup for statistical data (NPRT)

What does the number of records which is shown when you view an NPRT entry represent, is this the actual number of records being extracted or is it LUW or otherwise? Thanks

Hi ,
NPRT which gives log details of setup table,it means who has run setup table,how many records has added & how much time taken for filling setuptable.
LUW which gives delta records.

Serious error occurred during enrichment of catalog data

Can anybody help me with this error?
I have created my catalogue i have added my schema i have mapped it. but when i upload my items i get the error above, this is urgent as this in my live system. UAT was fine

Hi Steve,
To approve the catalog you just need the role /CCM/CATALOG_APPROVER if you don't want to have and approver, go to customizing and change the Default Value for catalogs, transaction SPRO->Cross-application components->SAP Catalog Content Management->SAP Catalog Authoring Tool->Specify Default Value for Catalog Status
I hope this helps you.
Please reward points for helpful answers.
Jose Luis D.

CONVT_NO_NUMBER dump while filling PURCHASING setup tables

hi experts,
I have deleted the setup tables in lbwg and try to fill the setup tables again, it is running like 6-7 secons and giving the the below dump,
CONVT_NO_NUMBER. dont understand why it is giving the dump.
plz provide the solution to solve the above dump,i need to fill the setup tables and extract the data into PRODUCTION SYSTEM.
pl check the below error analysis.
Error analysis
    An exception occurred that is explained in detail below.
    This exception cannot be caught in the context of the current statement.
    The reason for the exception is:
    The program attempted to interpret the value "P" as a number, but
    since the value contravenes the rules for correct number formats,
    this was not possible.
Regards
venuscm

Hi,
I received the same runtime error "CONVT_NO_NUMBER" after I start the application specific setup of statistical data - perform setup purchasing. The short text of the runtime error describes that "P" is not recognized as a number.
In my case the ABAP-program "SAPLEINS" was interrupted because the function module "ME_STATISTICS_LIS_NEW" could not be processed successfully in line "341".
So I set a break point in this line and start the perform setup for purchasing (LIS-application 02) again. The debugging mode showed me the dataset of purchasing document that was responsible for the program abort. In the table "ekbe" (History per Purchasing Document) exists one or more purchasing documents who has as transaction/event type (ekbe-vgabe) an alphabetic character. But alphabetic and numeric characters are absolutely correct for the data maintenance of transaction/event type in the purchasing document.
In my case the ABAP statement in line 341 (... WHERE vgabe = 1.) could not be interpreted the dataset with the alphabetic transaction/event type "P" (invoice parking).
The sap-Note 1548467 resolved my problem and I was able to perform the setup for purchasing successfully.
* LOOP at t_ekbe WHERE vgabe = 1.                      " 1548467
LOOP at t_ekbe WHERE vgabe = '1'.                    " 1548467
Best regards
Michael

Error occured during update, and now i cant even use my phone.

i was going to update my ipone 4 from 4.2.1 and after the itunes downloaded, the update, it said, an error occured during setup, but i didnt remeber the number of the error. and i cant see it in itunes, and i see an usb cable and itunes on my phone main screen. i dont know, what can i do.

This support article won't help since he was able to connect to iTunes but got an error message and his phone went into recovery mode while attempting to update. He needs to resolve the specific cause of the error. Restarting the computer and iTunes won't help at all.
This article may help if he can get the specific error message:
http://support.apple.com/kb/TS1275

Excel SSAS Tabular error: An error occurred during an attempt to establish a connection to the external data source

Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.

Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support

Exception occured during invocation of JCA binding ORA-01403: no data found ORA-06512: at line 1

Dear Legends,
My requirement is to call store procedure from BPEL. So for I created a BPEL with 2 assign activity and 1 Invoke activity to Invoke the DB adapter. After Deploying I tested the process but it shows the following error:
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_SBL_SPROCS1' failed due to: Interaction processing error.
Error while processing the execution of the SIEBEL.PORTAL_SPROCS.ACP_CONREGISTRATIONLOOKUP_WRAP API interaction.
An error occurred while processing the interaction for invoking the SIEBEL.PORTAL_SPROCS.ACP_CONREGISTRATIONLOOKUP_WRAP API. Cause: java.sql.SQLException: ORA-01403: no data found
ORA-06512: at line 1
Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-1403" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary></part><part name="detail"><detail>ORA-01403: no data found
ORA-06512: at line 1
</detail></part><part name="code"><code>1403</code></part></bindingFault></bpelFault></fault><faultType>
<message>0</message></faultType></messages></details></event><event sid="BpPrc0.1" cat="2" n="16" date="2013-08-08T05:39:39.121-04:00" type="4"><message>"BPELFault" has not been caught by a catch block.</message></event><event sid="BpPrc0.1" cat="2" n="17" date="2013-08-08T05:39:39.270-04:00" type="3"><message>The transaction was rolled back. The work performed for bpel instance "960968" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message.</message></event></audit-trail>
What does the above error says?
1. Whether concern Grant or Execute Privileges is not properly provided to the user?
2. Is there any Dangling Privileges are prevailing?
3. Is that the Store Procedure to be Handled with an Error Handling by means of Exception?
4. Is that I have been giving wrong test data?
5. Is that No data being existing in the Procedure?
6. Is that anything related to XA and NON-XA Data Source?
Any kind of help would be much appreciated. Thanks in Advance.
Thanks,
Karthik

Can you check the following ?
a. Hopefully the when you execute the procedure using sql tool it works fine and returns data.
b. Is there any input parameter available for procedure ?
c. IF yes, is the parameter is mapped with the procedure parameter and populated with value before calling the procedure ?
d. In the audit trial, you can see from the invoke activity to see whether the parameter is populated with value or not ?
e. Check the input parameter by executing the procedure with sql tool to see whether this request is receiving any data in return or not ?
Thanks,
Vijay

So I have just had my potentially duff hard drive replaced and uploaded my data from time machine to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. How do I get back to qwerty?

So I have just had my potentially duff 1Tb hard drive replaced by apple and uploaded my data from time machine only to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. Any idea how I can get back to qwerty?

roxandiv wrote:
pages is now speaking to me in a different language.
What exactly are you referring to? Are the menus or templates for Pages in a different language? Does something strange appear on the screen when you type?
Could you perhaps use the Camera icon here to post a screenshot of what you are seeing?
To make sure you have the right keyboard, go to system preferences/language & text/input sources and make sure that only the box for US or British is checked (and that the box for French or German or anything else is not checked).

An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.

in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Error Occured During Data Selection

Hi Community,
 I got "Error Occured During Data Selection" when loading data from ODS to Info Cube. This info cube already contained data before but first time I didnt get complete records (both in ODS and Info Cube) so I deleted the request and load the data in both ODS and Info cube.
 I got the records in ODS but when I am loading data from ODS to Info Cube then error displayed in Monitor display called "Error Occured During Data Selection"
 I am working on BI 7.0. Please help me
Regds
Robbie.

Hi,
Have you deleted the Delta inti info available in the info package which is used to upload the data from ODS to Cube . Here you have to make it red and then delete it.
Other wise delete the row available in RSA7( in BIW) which was created at the time od the delta init from ODS to CUBE upload.
and aslo check the following link is relevent to your problem?
/message/2922612#2922612 [original link is broken]
With rgds,
Anil Kumar Sharma .P

Exception has occurred during data insertion ... Wrong number of parameters

I am using an ADO dataflow source and an ADO dataflow destination to move data from a table on an IBM iSeries DB2 database to another IBM iSeries DB2 database on another machine. The connection managers for source and destination both use .Net Providers\Odbc
Data Provider with the Data Source Specification being ODBC connections specified on the Windows Server 2008 r2 machine hosting bids. All the test connections work...so far so good.
Issue is when I execute the control flow task the rows get picked up from the source DB2 database no problem but it fails on the insert to the destination DB2 table...The progress tab specifies the exceptions...
[ADO NET Destination [601]] Error: An exception has occurred during data insertion, the message returned from the provider is: ERROR [07002] [IBM][System i Access ODBC Driver]Wrong number of parameters.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (601) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (604). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
I put a data viewer on the data flow connection and the records I expect are getting picked up and look ok. I checked to make sure the source and destination tables have the same number of columns in their record layout and identical data
types and they look fine.
Could someone kindly tell me whats going wrong? Does the error message indicate that some of the columns are getting dropped from the dataset before the insert?
Thanks much in advance for any help, Roscoe

Hi Roscoe,
Glad to hear that you have found the root cause. So, the issue occurs because numeric values with no decimal cannot be inserted into the Decimal data type column in the DB2 table. In SSIS, data type Decimal of DB2 database is mapped to data type DT_NUMERIC.
To address the issue, you can do a data conversion for the column in question to define its precision and scale such as DT_NUMERIC(9,2) by using the Data Conversion Transformation before the ADO NET Destination.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Dump EXPORT_TABLE_UPDATE_CONFLICT occurred during setup of statistical data

Similar Messages

Maybe you are looking for