Dump for custom planning books in SDP94

Hi,
        We are having a fresh SCM APO 5.0 installation. We used to get a dump whenbever the SDP 94 transaction was executed. We found a SAP note 889989 and applied. Now the problem is it is dumping for any other planning book except the standard SAP delivered ones when the SDP94 transaction is executed. I found a note 498861 but does it help?
Here is the dump:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          10/10/2007 16:39:31
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Control Framework : Error processing control
     Long text of error message:
      Diagnosis
          An error occurred when the system tried to process the commands
          from the Automation Queue on the presentation server.
          There are several possible reasons for this:
          - The installation of the SAP GUI on the presentation server is
          faulty or obsolete.
          - There is an error in the application program
          - There is an error in the SAPGUI or an integrated control
      Procedure
          1. Make sure that you have imported the appropriate Support
          Package, the current kernel, and GUI patch for the release of your
          system
          2. Check whether the error occurs locally on one or a few PCs, or
          generally on all PCs. Note whether the error only occurs for some
          users, for example because of a specific Customizing setting.
          If it only occurs locally, this suggests an installation problem
          with the PC. Check the installation; if necessary, reinstall thesoftware. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
   "Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Trigger Location of Runtime Error
    Program                                 SAPLOLEA
    Include                                 LOLEAU02
    Row                                     29
    Module type                             (FUNCTION)
    Module Name                             AC_SYSTEM_FLUSH
         Can any one suggest me a solution please?
Thanks.

hi Raj,
this normally happens for all the new installations when opening the planning books with tcode /SAPAPO/SDP94. every new installation gives different dump with the above tcode. the best option is to contact the SAP team.
regards,

Similar Messages

How can we restrict the users/planners for a planning book?

Hi experts,
How can we restrict the users/planners for a planning book?
Thanks,
Naga.

Hi Naga,
we describe this in our SAP Demand and Supply Network Planning rapid-deployment solution.
Access this area directly via
http://service.sap.com
/rds-dpa
In the configuration guide Demand Planning Settings, Macros and Chart
Engine (DP3) read Appendix: Setting up Roles and
Authorizations.
BR Frank

Long time for loading Planning books/data views

Hi
Could someone throw some pointers/solutions for extremely horrible time taken for a planning view (data view) to load and populate for certains selection profiles that already have large number of trasactional records. In my case it is specifically the run time dumps thrown for a popular combination (large number of transactions).
Urgent suggestions/solutions required. Pls. call 9923170825. India, if you are lazy enough to type it out. or just type in some key words, tcodes etc.
Thanks

I hope you dont have too many macros hogging the memory in interactive book. The other thing is to be on the latest LC build. Also try to have default unit of measures (keep the dataview settings for UoM blank).
Can you confirm if you build the TLB view brand new in 5.0 or did you do some migration of the books ? The first time opening of book takes longer due to some compilation of certain objects. in SM50, try to identify where the process takes longest - whether it is at client end, at the DB procedure of LC or at application level.

Unable to release transport request for modified Planning book from Dev Sys

Hi All
can someone advice on this:
We have included a new key figure to our existing Planning book, which is already defined in Planning Area. This key figure is just getting shipping data for comparison and is not having any impact on macros also. We inserted key figure and set the attributes as output only and all looks good in Development system. But when we created transportation request and trying to release request it is giving error "Test Call of transport control program (tp) ended with return code 0208" Message no: TK094
can any one advice on this
KV

Hello,
Please check with Basis team. I think this is not related to planning book that you are trying to export. A look in the message text gives the following:
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed.
Hope this helps.
Warm regds,
Ashutosh

Alert's for Multiple Planning Book

Hello Experts,
We have created a macro, let's say for planning book1. Created a activity for the same. So once the job is executed we are able to see the alerts. Now the requirement is the same alerts has to be viewed in other planning books too (Say PB2 and PB2). One way is I can create a new activity for the PB2 and PB3. But again it's a performance problem for us. So please let me know is there any other way to implement this.
Thanks in advance.
Regards,
Siva.

Hi Siva,
I think it is possible to assign the (macro-generated) DB Alerts to a different planning book. Using macro workbench, you can do this in the properties for the alert in a particular macro.
We have a situation where a particular macro alert is executed in a background process in a background-only planning book. However, we assigned the alert to the interactive planning book, so the users can see it interactively. It also simplified the creation of the alert profile in /SAPAPO/AMON1. (We are on APO 5.0)
The only shortcoming of this is that the alerts are no longer available in PB1. Once they are assigned to PB2, that's it.
Dan

Rolling year for DP Planning book

Hello DP Gurus,
I have a business requirement in Demand Planning where client wants a future rolling year in Planning book.
The defination of rolling year is current month + 11 months in future displayed in a yearly bucket.
E.g. Rolling year for a current month i.e. Aug 2014 is from Aug 2014 to July 2015 as Year 1 and Aug 2015 to July 2016 as Year 2.
When we move into next month i.e. Sept 2014, the rolling year will be from Sept 2014 to Aug 2015 as Year 1 and Sept 2015 to Aug 2016 as Year 2.
So the planning book will have two buckets in future as Year 1 and Year 2
I have tried the following and it does not support our requirement.
1. Fiscal year variant in time bucket cannot be used as I can add only one fiscal year variant in my SBP. What I would need here is 12 fiscal year variants e.g. Jan - Dec, Feb-Jan, March-Feb etc
2. Planning Start date in data view does not work as it considers a calander year.
Have anybody come a cross this requirement. Could you please help us on this.
Thanks in advance.
Regards,
Sameer

I dont think it is possible to restore a deleted data view. What you can do is backmigrate the planning book from production to quality. That will make sure that your data view( actually the entire planning book) in quality is in sync with that in production. Backmigration is very easy and you can take help from basis team to do that
Thanks
Aparna

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

Restrict User Access to Planning Books- Creation of Roles

Hi All
I want to restrict the users to access/see only limited number of planning books in SDP94
menu
For this, I tried creating a role and assigned authorization C_APO_PB with required planning book values
However I am not sure how to create the role properly. In the change role screen, the "Menu" and the "Workflow" tabs are red, while authorization tab is green
Do I need to do any activity in Menu and Workflow tabs
Please guide
Any help on this is highly appreciated
Thanks
Vijay

Moderator message - Cross post locked
Rob

Adding a attribute in Demand planning book.

Hello Experts.
We do have a "location" as a attribute in various planning book, now we have to add it another planning book, where its need from business.
Could you please let me know what procedure has to be adopted to add a existing attribute in another planning book ?
Regards
Rahul Chitte

Rahul
The changes that you need to make may be very simple or too complex based on the answer to one question - Is the master planning object structure the same for both planning books ( that is the planning book that has location attribute and pb that does not have location attribute). . If the MPOS is the same then your changes can be done easily. The mpos associated with a pb can be found by going to the pb in /n/sapapo/sdp94 and right clicking on it and displaying details.
If the mpos is the same, then all you have to do is go to the planning book in /n/sapapo/sdp8B , go to characteristic tab and drag the location attribute from right to left and hit continue and save. Thats it you are done.
But if the mpo structues are different , then you first have to add the location characteristics to the mpos. For this you have to deactivate the mpos and when you do this you will lose all your cvc's . So you have to backup the data before you deactivate the mpos. Then add the location characteristic and activate the mpos and reload the data to the mpos. This is a very complex and critical process .
Thanks
Aparna

Step by step to create planning book & Macro's behind it   I am a ABAPer

Recently I have been shifted from R/3 to Apo ; Want to know the creation of planing book & the creation of Macro workbench playing behind planning book .
To create planning book.
To create Macro & how to relate a planning book with the macro.
Step by step process from simple to complex .
Different process to programe a macro .
I can understant ( rather I know ) how to relate a badi (Enhancement spot ) to a macro & but please guide me how to define a row of a planing book : such as how to define the row 'Avg Weekly Forcast' of planing book in a single varriable as 'ZAVGWKFST' to capture it at badi in the parameter I_T_LINES[]
(component - FELDH).
To create a custom Button in a planning book & how to program.
I have many broken links while I try to know it by myself.

Hi amitabha,
Please find below the detailed steps to define a planning book:
A planning book defines the content and the layout of the interactive planning screen. Planning books are used in Demand Planning and Supply Network Planning. They allow you to design the screen to suit individual planning tasks. A planning book is based on a planning area. You can create several user-specific data views in a planning book. In this step, you create a planning book for Demand Planning.
Procedure
1.     Access the activity using one of the following navigation options:
SAP SCM menu     Advanced Planning and Optimization  Demand Planning  Environment  Current settings  Define Planning Book
Transaction code     /SAPAPO/SDP8B
2.     Enter the planning book DP_001 and choose Create.
The Planning Book Wizard dialog box is displayed.
3.     Make the following entries:
Field name     User action and values
Planning Book     Enter the planning book DP_001
Planning book text     Demand Planning
Planning area     Select the planning area DP_001 and choose Enter
Manual Proportion Maintenance     X
Promotion     X
Univariate forecast     X
4.     Choose Continue.
5.     Assign the following key figures from planning area to the planning book by using drag and drop or choose Add all new Key Figures to add all key figures:
Description     Value     Comment
History     9AVHISTORY     Relevant for Scenario MTS
Forecast     9ADFCST     Relevant for Scenario MTS and VMI
Promotion 1     9APROM1     Relevant for Scenario MTS
Forecast (addition.)     9AAFCST     Relevant for Scenario MTS
Planned Price     9APRICEFC     Relevant for Scenario MTS
Sales Forecast     9AREVFC     Relevant for Scenario MTS
Production (Planned)     9APPROD     Relevant for Scenario MTS
Manual Correction     9AMANUP     Relevant for Scenario MTS
Additional Field 1     9AADDKF1     Relevant for Scenario VMI
Additional Field 2     9AADDKF2     Relevant for Scenario VMI
Additional Field 3     9AADDKF3     Relevant for Scenario MTS
Additional Field 4     9AADDKF4     Relevant for Scenario MTS
Additional Field 5     9AADDKF5     Relevant for Scenario MTS
The Proportional factor APODPDANT key figure is automatically added to your planning area when you create the planning area. You do not have to add this key figure yourself and assign it to the planning book in this step. When you create the respective view, this key figure will be automatically there for your selection.
6.     Choose Continue.
7.     Assign the following characteristics from the planning area to the planning book by using drag and drop:
Description     Value
APO Location     9ALOCNO
APO Product     9AMATNR
Brand     9ABRAND
Sales Organization     9AVKORG
APO Destination Loc.     9ALOCTO
     The characteristic 9AVERSION (APO Planning Version) will be added to the planning book automatically after you complete this step.
9.     Choose Continue to go to the Data View tab (the Key Fig. Attrib tab is available in the change mode only after you have completed the planning book).
10.     On the Data view tab; enter the following values:
Field name     User action (Scenario MTS)     User action (Scenario VMI)
Data view     DP_Standard     VMI_Standard
Data view description     Demand Planning     Demand Planning
TB profile ID (future)     DP_4Weeks_5Month     DP_4Weeks_5Month
TB profile ID (history)     DP_12Month     DP_12Month
Status     3 (Changeable)     3 (Changeable)
11.     Choose Enter.
12.     Select Visible and select the date as of which you wish the past planning horizon to be visible when this data view is opened.
13.     Choose Continue, and assign the following key figures from the planning book to the data view for either the MTS or the VMI scenario, keeping the same order as in the table:
Make-to-Stock
Key Figures      Description
9AVHISTORY     History
9ADFCST     Forecast
9APROM1     Promotion 1
9AAFCST     Forecast (additional)
9APRICEFC     Planned Price
9AREVFC     Sales Forecast
9APPROD     Production (Planned)
9AMANUP     Manual Correction
9AADDKF4     Additional Field 4
Vendor-Managed Inventory
Key Figures      Description
9AADDKF1     Additional Field 1
9AADDKF2     Additional Field 2
9ADFCST     Forecast
14.     Choose Complete.
15.     When the Planning Wizard prompt appears, choose Yes to complete the planning book and data view.
16.     On the initial screen, change the planning book you have just created by choosing Edit.
17.     If you are installing the VMI scenario, continue with step 21 (entering a free text for the key figures).
If you are installing the Make-to-Stock scenario, repeat steps 9 to 12 to create the following views:
Views     View Description     Key Figures
DP_CLP     COLLABORATIVE DEMAND PLANNING
          History
          Forecast
          Forecast (additional)
DP_RELEASE     DEMAND PLANNING - RELEASE VIEW
          Manual Correction
18.     On the Data View tab page, specify the following TB profile IDs for the DP_RELEASE view,
Field name     User action and values
TB profile ID (future)     DP_12Month
TB profile ID (history)     blank
19.     Create the remaining views for the Make-to-Stock scenario according to the steps 9-12:
Views     View Description     Key Figures
DP_LOGISTICS     DEMAND PLANNING - LOGISTICS VIEW
          Forecast
          Production (Planned)
DP_SALES     DEMAND PLANNING - SALES VIEW
          History
          Forecast
          Forecast (addition.)
          Planned Price
          Sales Forecast
          Manual Correction
DP_PROP     DEMAND PLANNING - PROPORTIONAL FACTOR VIEW     Proportional Factor
To modify the proportional factors manually, you need to create a separate data view containing only the APODPDANT key figure to control the authorization to change these factors. This key figure is a default value in the view and is thus invisible, so you do not need to assign any key figure from the right list in this view.
20.     Choose Complete.
21.     Go to the Key fig. attributes tab, select the FreeText radio button and make the following entries for each key figure. Choose Save Setting after entering the data for each key figure (depending on your scenario).
Key Figures     Free Text     Relevant for scenario
9AVHISTORY     Historical Data     MTS
9ADFCST     Statistical Forecast     MTS and VMI
9APROM1     Promotion     MTS
9AAFCST     Sales Forecast     MTS
9APRICEFC     Planning Price     MTS
9AREVFC     Sales Revenue Forecast     MTS
9APPROD     Logistics Forecast     MTS
9AMANUP     Final Forecast     MTS
9AADDKF1     VMI Historical Data     VMI
9AADDKF2     VMI Customer Forecast     VMI
9AADDKF3     u2013     MTS
9AADDKF4     Forecast Deviation     MTS
9AADDKF5     Customer Forecast     MTS
22.     Choose Complete and exit the planning book maintenance.
Steps to create macros in macro wrokbench:
3.7     Creating Macros (SAP APO)
Use
You can use advanced macros to perform complex calculations quickly and easily. Macros are executed either directly by the user or automatically at a predefined point in time. When defining advanced macros, you work in a special desktop environment known as the MacroBuilder.
In total, four macros are created in the Demand Planning building block. They are all defined for the planning book DP_001. You create three macros for forecast calculation according to the following instruction. The chapter Creating the Macro for Consensus-Based Planning describes how to create the alert macro for consensus-based planning.
In the DP_STANDARD view of the planning book DP_001, you create two macros:
The first macro is used for the standard and consensus-based planning. The system calculates the arithmetic average of Statistical Forecast, Sales Forecast and Logistics Forecast, the result of average forecast data plus Promotion Data is inserted in the Final Forecast cell. It enables the user to consider the forecast input and the promotion plan from different departments within the company. The planner can make manual adjustments and enter the final agreed forecast into the Final Forecast cell. All of this information can be shown in the planning book screen.
The second macro multiplies the Final forecast data with the Planned price to calculate the sales volume. The third macro is an alert macro used for highlighting exceptional situations in consensus-based planning.
In the DP_SALES view of the planning book DP_001, you create the fourth macro. This macro multiplies the Final forecast data with the Planned price to calculate the sales volume, which is the same as the one in the standard view.
3.7.1     Creating Macros for the Standard View
1.     Access the activity using one of the following navigation options:
SAP SCM menu     Advanced Planning and Optimization  Demand Planning à Environment à Current settings à Define Planning Book
Transaction code     /SAPAPO/SDP8B
2.     Enter the name of the planning book: DP_001
3.     Select Data view DP_standard.
4.     Choose Edit.
5.     Choose    MacroBuilder  MacroBuilder  Data view.
3.7.1.1     Creating the Macro for Consensus-Based Planning
1.     Right-click the macro node below the planning table and choose Create New Macro  Add macro. In the APO Macro Builder dialog box, enter a descriptive text for the macro, for example, Forecast + Promotion  Final Forecast. Choose Continue.
2.     Right-click the macro and choose Add macro Element  Step.
In the APO Macro Builder dialog box, in the descriptive text section, enter a name for the macro step, for example, First Step and choose Continue.
3.     Right-click the macro step and choose Add Element (Result Level) à Add results row.
In the APO Macro Builder dialog box, choose Final Forecast in the Row field. Choose Adopt.
4.     Right-click the result row you have just created and choose
Add Element (Argument Level) à Add Operator/Function.
In the APO Macro Builder dialog box, choose u201C(u201C.
5.     Right-click the operator/function you have just created and choose
Add Element (Argument Level) à Planning Table Element à Append argument row. In the APO Macro Builder dialog box, choose Statistical Forecast in the Row field.
6.     Right-click the argument row you have just created and choose
Add Element (Argument Level) à Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C+u201D.
7.     Right-click the operator/function you have just created and choose
Add Element (Argument Level )  Planning Table Element  Append argument row. In the APO Macro Builder dialog box, choose Sales Forecast in the Row field.
8.     Right-click the argument row you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C+u201D.
9.     Right-click the operator/function you have just created and choose
Add Element (Argument Level )  Planning Table Element  Append argument row. In the APO Macro Builder dialog box choose Logistics Forecast in the Row field.
10.     Right-click the argument row you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C)u201D.
11.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C/u201D.
12.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, enter u201C(u201D.
13.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201CSIGN()u201D and change it to u201CSIGN(u201C.
14.     Right-click the operator/function you have just created and choose
Add Element (Argument Level )  Planning Table Element  Append argument row. In the APO Macro Builder dialog box, choose Statistical Forecast in the Row field.
15.     Right-click the argument row you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C)u201D.
16.     Right-click the operator/function you have just created and choose
Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C+u201D.
17.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201CSIGN()u201D and change it to u201CSIGN(u201C.
18.     Right-click the operator/function you have just created and choose Add Element (Argument Level )  Planning Table Element  Append argument row.
In the APO Macro Builder dialog box, choose Sales Forecast in the Row field.
19.     Right-click the argument row you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C)u201D.
20.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C+u201D.
21.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box choose the character u201CSIGN()u201D and change to u201CSIGN(u201C.
22.     Right-click the operator/function you have just created and choose Append argument row. In the APO Macro Builder dialog box, choose Logistics Forecast in the Row field.
23.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C)u201D.
24.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, choose u201C)u201D.
25.     Right-click the operator/function you have just created and choose
Add Element (Argument Element)  Append Operator/Function.
In the APO Macro Builder dialog box, enter u201C+u201D.
26.     Right-click the operator/function you have just created and choose
Append argument row.
In the APO Macro Builder dialog box, choose Promotion in the Row field.
27.     Select the macro and choose   Check to check it. Generate the macro by choosing   Generate.
28.     Move the macro by using drag and drop to the Events section and to the Default folder in the upper right screen area.
29.     If you want to continue with the configuration, proceed with the next activity to create the Sales Volume Macro (see below).
If you want to discontinue the configuration at this point, we recommend that you save your settings. To do this, go back to the Planning book Design screen and choose Save. Choose All Functional Areas when the confirmation prompt appears.
Hope this should help you.
Regards,
Umesh

Planning Book Macro which can read different key figures from data views

Hi Experts,
I am looking for help to create a Planning book level macro which is having capabilities to read different Key Figure across the different Data Views. For example DataView 1 has Sales Orders and Data view 2 has Forecast and I want put in Data view 3 the netted numbers from SO and Forecast.
Please provide me some quick pointers.
Regards,
Rahul Mohnot

Hi,
Not only is it the easiest way, it is the only way to do it as Laurence has put it. As you can see, macro workbooks are created for a Planning Book/Dataview combination.
Thanks
Mani

Rename & deletion of planning book & Data view

Hi Experts,
Is it possible to rename & deletion of planning book & Data view, if yes what is the procedure.
Also suggest if hiding of same is possible

Hello jrd333
You can delete planning book/data view via transaction /SAPAPO/SDP8B
There you can choose PB/DV that needs corrections.
Also you maybe need to deactivate your planning area to wich this PB is assigned.
You can do this in transaction /SAPAPO/MSDP_ADMIN
This things is related to custom Planning Books/Views.

Planning book creation

Hi All,
Is it possible to create multiple Planning Books in same Planning Area?
If yes, how?
Please reply.

Hi Ashish,
Planning Book: Planning Book is a content and layout for designing a Interactive Demand planning(IDP).
we need to design the PB's for different demand planners/group of planners.
we have the option for creation of macros for execution in planning books.
A planning book is based on a Planning Area.there is no limitation for the planning books we can create number of PB's for one PA(Planning Area)
For creating PB Tcode is : /SAPAPO/SDP8B
select the radio button for creating PB
Provide PB name and description.and the we need to provide our PA, So at this time what ever the Char and Kefg are available in PA all are existed in PB also
then you can assign what ever you want the Kefg and Char assign to PA to PB.
And the select check boxes related to UVM.MLR composite and Promotion.
we need to select this check boxes what ever you want.
Repeat the same procedure for all the Power users Individually.
and also create DV's for each PB
And better to find this bellow link very useful.
http://help.sap.com/saphelp_scm41/helpdata/en/17/a5214732a111d398260000e8a49608/frameset.htm
Regards,
Pullaiah

Locking Planning book

Hi,
Has anyone worked on code for locking planning book? I already have a code but it fails at one scenario to lock the planning book. There are FM to lock the planning book, which behave exactly as I want in that scenario, but when I use them in my program even they fail to lock the planning book in that scenario.
For more details, you can check my thread for which link is given below
@Moderator - I had opened a similar thread before but it was locked by moderator (Thomas Zloch) with comment to do my own research. I have already done much research about this and have found my problem to be still existing in all the codes/solutions. I have already posted in SAP APO section regarding the specific problem and haven't got any solution from there too. Hence decided to check in ABAP section if any abapper had worked on the same.
[Lock Planning book before batch job run|Lock Planning book before batch job run]
Thanks!

Your first attempt left no choice but to lock it.
Planning book lock
Thanks for supplying more information this time.
Thomas

Publishing an APO Planning book to EP

Any ideas on publishing an APO planning book to EP? Are there are business packages available? Couldn't find any on Iviewstudio.

Hello Anand,
I know this post was made a long time ago.. but yet, I wanted to check if you found a business package for APO planning book to implement it on th portal.
Thanks and Regards,
Reena

Dump for custom planning books in SDP94

Similar Messages

Maybe you are looking for