Dump:Function module "/GRCPI/GRIA_SPM_SYNC" not found

Hello Experts,
When executing EAM Master Data Synch from GRC system, a short dump results with the description "/GRCPI/GRIA_SPM_SYNC" in Plugin system ( Basis 640 ).Plugin system is at latest patch level ( GRCPINW SP12 ).we found that no function module available in plugin system.Could you please suggest or recommend any fix ? your help is much appreciated.
Regards,
Rajan

Rajan,
I connected GRC 10.0 to Plugin system which is on Basis 640. But gettign similar ABAP dum as you"
The function module "/GRCPI/GRIA_SPM_SYNC" was called, but cannot be found in the Function Library". I Already implemented following SAP notes:
0001941542 CALL_FUNCTION_NOT_FOUND dumps on running EAM Sync job or FF
0002062450 EAM function modules are missing in 640 and 620 releases
How did you resolve this issue?

Similar Messages

  • Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found

    Good day Masters
    I am not able to connect to our SAP ECC6.0 because of the below error
    Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found
    is this function modules exists on the transport files ? do you think by executing the transport this problem will be resolved ?
    and how we can execute the transport files from Basis perspective ,,, our basis tried to execute this transport to they got belw error
    " file might be currapted "
    Regards

    Hi
    your BASIS administrator should copy the transport files in the import queue and use the STMS transaction to import them in your system. Make sure to import the UNICODE version in the order as shown in the transports_<your language>.txt file.
    Make sure that the files are indeed imported.
    Which version of BOBJ are you using?
    Regards,
    Stratos

  • Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

    Hi,
    I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
    Thanks in advance.
    Rose

    Hi
    Contact your basis administrator to ensure
    - All the transports have been installed properly.
    - Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
    For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
    Regards
    Sourashree

  • Error in RFC; 'Function module "/GRCPI/GRIA_USR_GET_DETAILS" not'

    Background:  I have setup my sandbox to do the End User Logon so that guest users can come in and create access requests.  This was configured and tested and it was working.
    Then, we connected the Active Directory system, and that is also working so that when I go in as an authenticated user (NOT END USER LOGON), and create an access request, the user data is pulled from Active Directory.
    NOTE: First, we finished the EUL, then weeks later, we connected LDAP.  Now I am reviewing and this happens.
    So today, I start seeing this error that's in the subject line.  I'm attaching a screenshot.
    As the sandbox was configured and working, I haven't gone and changed anything except for the user data sources, which is pointing to LDAP.
    I went and changed the user data sources back to what it was before, and I'm still seeing this error.
    Not sure where to look because what info I have found appears to suggest a plug in version discrepancy.
    We don't have the GRC plug in installed on the GRC system.  (separate question - should we have it installed on the GRC system?)
    So ... I need some help please - this one is eluding me.
    Thank you.
    Santosh

    Hello Santosh,
    The error message is mentioning that a plug-in function was not found. You will need to check if all connectors involved in your user data source (details) have the plug-in installed. This function module is only available in Plug-in add-on (GRCPINW).
    I would check the system in the following order:
    1 - Check the User data source details (connectors involved)
    2 - Check whether the connectors have plug-in installed and if they have the minimum compatibility requirements (according to SAP note 1352498)
    3 - Check the integration scenarios (1562760)
    4 - If you need to configure LDAP for this matter, use SAP note 1584110  
    Hope I could help.
    Fernando

  • Function module "/SAPAPO/CIF_CBASE_INB" not found.

    Dear,
    When I want to CIF the sales orders from ECC to TM 8.0 system. I get this short dump in TM. This function(/SAPAPO/CIF_CBASE_INB) is not available in TM. Is there any idea about how I can solve it?
    Regards,
    Mehmet YILMAZ

    Sorry Mehmet, I missed it in your thread.  Why are you CIF'ing your sales orders to TM instead of setting up the standard connector (in PI/XI)?
    Regards,
    Mike

  • ECC 6.05 IDES - /GRCPI/GRIA_USR_GET_RANGES not found errors

    Dear colleagues,
    We an ECC 6.05 IDES system.  I noticed today there are between 5000-10000 runtime errors occurring daily.  The error is: Function module "/GRCPI/GRIA_USR_GET_RANGES" not found.  The main program is SAPMSSY1.  I suspect someone has been playing around and somehow activated the call to this function module.
    Does anyone know how to disable this?  I attached the runtime error output for reference purposes.
    Thanks in advance for any help.
    Rex

    Hi Rex
    Do you have a GRC component in your landscape and someone is trying to connect to the IDES ECC system where the short dumps are occurring?
    Extract of your ST22 dump.....
         Server-Side Connection Information 
         System.............. "GRC"
         Client.............. 100 
         User................ "ZS001SUP"
         Call Program........."CL_GRAC_AD_AUTH_MGMT_RFC======CP
         Function Module..... "/GRCPI/GRIA_USR_GET_RANGES"
         Call Destination.... "ZJAPNEET_ID5"
    Do you have the plug-in for GRC 10 installed on your ECC IDES. The short dump is someone trying to call the function module from the GRC system. They more likely have a job scheduled which is why it is high number of short dumps
    My issue is occurring on a standalone ECC 6.05 IDES system that is not integrated with any GRC system
    That may be the case but the person configuring GRC may not be aware of that. Possibly the name of the Call destination may be a clue as to the culprit? Find out who is in the GRC system and have a chat with them.
    Regards
    Colleen

  • CAUFVD gets initialized result in dump with error Production ord not found

    Hi All,
    We want to make change of start date and end date of a production order via CO02 (Production order change). Based on these changes we want to update an existing a Purchasing Planned Order  Start Dt and Finsih Dt (MD12) 
    We are using Enhancement component (PPCO0007) : Exit when saving production order
    Within this exit we are using BAPI_PALNNEDORDER_CHANGE  to update some other purchasing  planned order dates.
    The BAPI_PALNNEDORDER_CHANGE  is executing succesfully however the production order structure (CAUFVD)  gets initialized resulting in dump with error Production order not found
    How can we update and save a purchased planned order and also the  production order
    Barada
    Edited by: barada satapathy on Dec 8, 2010 9:14 AM

    Hi Max,
    Thanks for the reply...
    The error details are as below:
    Dump gets generated via program : (SAPLCOBT).
    Exception condition ORDER_NOT_FOUND raised.
    include = LCOBPU16.
    Row No: = 21.
    Module Type = (Function)
    Module Name = CO_BT_ORDER_DET_TEMP
    We also give brief details on what is happening:
    My exit calls from Standard (LCOZVU01) :
    CALL CUSTOMER-FUNCTION '001'
               EXPORTING
                    header_imp = caufvd
               IMPORTING
                    header_exp = caufvd_tmp
                    no_update  = answer.
    *     Check if update of header necessary and allowed
          IF caufvd-aufnr EQ caufvd_tmp-aufnr AND
             caufvd       NE caufvd_tmp.
            PERFORM caufv_upd(saplcobh) USING caufvd_tmp.
          ENDIF
    When BAPI for planned order is executed within the exit, the structure (caufvd) values are found refreshed. This structure is further updating the production order.

  • Calling a remote enabled function module which does not exist in caller sys

    Hi,
    I have a a system ABC from which I am trying call a rfc enabled fm(Test) present in system XYZ.
    The fm(Test) does not exist in the system ABC so I am getting generation errors and dumps.
    Is there a way for me to call these remote enabled function modules which does not exist in the caller system without the obvious errors etc.
    Is there any special way.
    Thanks

    Hi,
    please check this sample:
    REPORT  zcallfm                                 .
    DATA: xv_return TYPE sysubrc.
    CALL FUNCTION 'DOESNOTEXIST'
    DESTINATION   'NOWHERE'
    EXPORTING     caller                = sy-sysid
    IMPORTING     return                = xv_return
    EXCEPTIONS    system_failure        = 1
                  communication_failure = 2
                  OTHERS                = 4.
    It shouldn't throw any generation errors in your system!
    Regards,
    Klaus

  • Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

    I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
    It says that module Puma15Top was not found.
    But this module is a NI property and is automatically compiled by NI Compiler.
    The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
    This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
    So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
    Does anyone have any idea how to solve this problem? Or have you experienced some like this?
    Following error log:
    ### XstSynthesis ###
    Puma15Top
    Reading design: Puma15Top.prj
    =========================================================================
    *                          HDL Compilation                              *
    =========================================================================
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
    Entity <CLUC001_Conf> compiled.
    Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
    Entity <CLUC001_CLIP> compiled.
    Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
    Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Thanks in advanced!

    Hi Guilherme,
    Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
    Project: T_old.lvproj
    Target: F (RIO0, PXI-7951R)
    Build Specification: I_2
    Top level VI: I.vi
    Compiling on local compile server
    Compilation Tool: Xilinx 11.5
    Start Time: 2/9/2014 18:03:51
    Run when loaded to Fpga: FALSE
    JobId: z8Cq8B4
    Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
    Compilation failed due to a Xilinx error.
    Details:
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Start Time: 18:03:51
    End Time: 18:05:19
    Total Time: 00:01:27,414
     Best,
    JEMP

  • BAPI function module 'BAPI_PO_CHANGE' is not updating aacural condition

    Dear All,
    BAPI function module 'BAPI_PO_CHANGE' is not updating aacural condition in PO pricing. Please give me a right solution on this query.
    Below I have given my code.
    Thanks and Regards
    Makarabd
    poitem-po_item = '00010'.
    poitem-net_price = '1060.00'.
    poitem-period_ind_expiration_date = 'D'.
    APPEND poitem.
    poitemx-po_item = '00010'.
    poitemx-po_itemx = 'X'.
    poitemx-net_price = 'X'.
    APPEND poitemx.
    select single * from ekko where ebeln = po_no.
    pocond-itm_number = '00010'.
    pocond-cond_type = 'ZVCU'.
    pocond-cond_value = 10.
    pocond-currency = '%'.
    pocond-STAT_CON = 'X'.
    pocond-accruals = 'X'.
    pocond-change_id = 'I'.   " I - Add , U - Update , D - Delete
    APPEND pocond.
    pocondx-itm_number = '00010'.
    pocondx-itm_numberx = 'X'.
    pocondx-cond_type = 'X'.
    pocondx-cond_value = 'X'.
    pocondx-currency = 'X'.
    pocondx-change_id = 'X'.
    pocondx-STAT_CON = 'X'.
    pocondx-accruals = 'X'.
    APPEND pocondx.
       CALL FUNCTION 'BAPI_PO_CHANGE'
            EXPORTING
              purchaseorder          = po_no
            TABLES
              return                 = return
              poitem                 = poitem
              poitemx                = poitemx
              pocond                 = pocond
              pocondx                = pocondx.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    WAIT = 'X'.

    Hi ,
    Are you trying to pass the non char fields in CI_COBL. Please look at the link below .
    [http://forums.sdn.sap.com/thread.jspa?threadID=1137795] .
    Also serach for the similar threads when and notes while transferring currency and quantity field in different custom includes of the EKPO ...
    Thanks,
    Anjaneya .

  • Request having function group released but function module attribute shows not released

    Hi experts,
                   I am a beginner.
                  There is a transport request in which my function group and other objects were present . This transport request and its task were released . But if i check the attributes section of the function module that is present in that function group , it shows not released .
    Is there some problem ? did the function module not get released with its group? It wasn't showing anywhere in the request even though i had added it during creation.
    Here is the image :
    Thanks,
    Unnati

    Hi,
    Those two meanings of 'released' are unrelated. Don't worry about it.
    Also, a function module sometimes does not explicitly appear in a transport request, if the function group is already in there.
    cheers
    Paul

  • Function module WWW_ALV_CALL is not released for the Internet

    Hi
    I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
    Best Regards
    GAGAN

    hi,
    This Web based calls are not available anymore in Netweaver 2004s/7.0. 
    More information in SAP-Note: 910202
    Hope this helps
    regards
    Tobias

  • Function module RSD_ZIO_ALM02_TXT_GET does not exist

    Hi
    I am trying to copy the data from one info cube to another info cube with the read master data in transformation rule for some of the info object. This exercise I have done many times successfully for the same structure but suddenly I am getting this error without doing any changes
    'Function module RSD_ZIO_ALM02_TXT_GET does not exist'
    After getting this error I have delete the transfer rule for above object than the some error are coming for the another info object which also used for read master data.
    Kindly help me .(we are working on ECC 6)
    Thanks and Regards
    Vinay

    Hi Vis
    I tried this one also but it’s not working. All the info objects are active and I tried after reactivating also but still error exits.
    Thanks and regards
    Vinay

  • Function module RSD_ZBCSASSET_TXT_GET does not exist

    Hi,
    We are working with SEM-BCS 6.0 (SAP BI 7.0), and I want to trasfer master data of a infoobject from BI to SEM BCS through load from data stream task.
    When I going to execute the task the system display the next message Function module RSD_ZBCSASSET_TXT_GET does not exist.  Message no. EU802.
    Thanks in advanced
    Carlos

    Same error occured in a planning sequence of mine. The related characteristic did not have texts.
    The error occured after the addition of a navigational attribute to the MultiProvider.
    Solution: re-activate the aggregation level.
    Late, but hope that helps...

  • Function Module SWK_LOCAL_INBOX_GET does not exists

    Hi,
    I configured UWL in the Portal.
    When i am trying to acess UWL, throwing an exception.
    it says "Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Thu Apr 12 15:58:26 GMT+05:30 2007 :Function Module SWK_LOCAL_INBOX_GET not found"
    Can anyone help me what could be the problem.
    Rgds,
    Kiran Joshua

    Hello Kiran,
    at least the user needs to have the Role SAP_BC_SRV_GBT_USER in backend.
    My only other idea is to check the existance of the plugin (WP-PI) in R/3.
    But, in a similar situation (missing plugin in R/3) i got the ConnectorException "Failed getting the following function metadata from repository: URL_SERVER_TYPE_DATA_GET".
    Perhaps a trace in R/3 could assist you?
    Sorry, no more ideas, regards

Maybe you are looking for

  • ITunes.exe - Entry Point Not Found itunes will install but wont run!!!!!!!!

    I updated itunes and it wont work. i unistalled all apple apps, about 5 to 10 times. i get this message on my HP 530,32 bit windows vista. At the top in the error window it says *iTunes.exe - Entry Point Not Found* Then under that in the error box it

  • Routing issues on ASA 5525X running version 8.6(1)2

    Hello , I am migration from PIX 515E to ASA 5525X  running version 8.6(1)2 . The company uses pix as its Internet GW to the ISP ,behind the PIX there's a Cisco 3845 (C3845-ADVENTERPRISEK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)  Both devices a

  • Edit from aperture to photoshop

    When I edit my photos from aperture 3 to photoshop it transfers from a raw file to a tiff file. Is there an easy way to transfer a raw file from aperture to Photoshop and maintain it as a raw file. I presently have to export the raw file from apertur

  • How to distribute Modelview to external system such as Webmethods

    Hi All, I have a scenario like this  I  have to send Delivery idoc to two external systems                    Triggered through SAP               output 'ZEXA'. system        -> DESADV ->     External system (A)                     Triggered through

  • Olympus E-M10 - still "preliminary support"

    The release notes still say that the Olympus E-M10 has "preliminary support". Is it possible to get some information why it's still preliminary and what we can expect or what's missing? Do the files just get handled as the ones of an E-M5 or E-M1? Is