Dump:Generate Includes for sdccn for EWA

Dear All,
I am in the process of activating EWA,for which i am generating the includes for sdccn.When i run this it takes a long time to run and iam getting a timeout dump.
Now for setting up the EWA i have created all the RFCs from solman to the satellite system.When i create a EWA session in solman,the same is not reflecting in EWA even after i do refress session in sdccn of satellite system.
Is my problem due to not generating the includes for sdccn?
if so please help me in overcoming the dump.
Thanks in advance,
Avinash.

Hi Avinash,
if the generation of includes didn't complete without a shortdump, then probably the solution manager is no longer able to create EWA sessions for the satellite systems correctly. Often a cause for long-running generation of includes is a lack of any or recent optimizer statistics for table D010INC. I would suggest (re)creating the statistics for the table and then trying to generate the includes again. The EWA sessions created by Solution Manager after the successful generation of includes should be picked up by the satellite.
best regards,
-David.

Similar Messages

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

Reusing JAXB generated classes for XSDs included in other XSDs

Hi,
I use xsds with jaxb in a number of related projects. To avoid duplication I've factored out commonly used elements into their own xsd in a separate project. I then include these in the xsds that need them.
I generate classes with jaxb for each project. I'm now trying to get jaxb so far as to reuse the already generated classes for the common elements.
For example: I have a general xsd Person.xsd for which I generate classes in common.xsd. I have another xsd Project.xsd that includes a reference to the Person element. When i let jaxb generate classes for Projects.xsd, it will also generate a project.xsd.PersonType and so on.
Is there any way to tell JAXB to use the existing classes? I've played around with the <jxb:javaType> bindings, but I can't get it to work yet. It gives me a "bindings not used" warning and doesn't compile. Also, if this is in fact the way to go, what do I specify as the parseMethod and printMethod attributes for the javaType element?
Thx for any help

JAXB questions should be better directed to the users list of http://jaxb.dev.java.net/
you should subscribe to the 'users' mailing list, then post a question there.
Thank you!

Solution Manager for EWA

I already configured my EWA (SDCCN), but then I realize that EWA need Solution Manager to run.
I need to know how to install Solution Manager for my EWA? Do I need to install in separate server? Or there are others option for me to consider?
Pls help me to figure this out

Hello Hazha!
I don't know how you can configure in SDCCN an EWA session without the Solution Manager, but if you did so, you can send your EWA data to sap, where they will be processed and where you can find them in your inbox.
You need a well functioning SAPOSS RFC destination (TA OSS1).
SDCCN -> Goto -> Settings -> Task Specific
You will get a window with a tree list. Open RFC-Destinations -> Settings and click on the settings icon.
In Dialog RFC destinations, Tab Destinations you might click on the Info-Icon (botton) and you will get documentation. Click now on the Change Icon.
You will now get a new icon "Create destination to SAP OSS". Please use it, it should generate the destination SDCC_OSS.
Please test the destination.
Now you can insert this RFC-destination into the task attributes of your EWA-Session, system-id should be O01.
Bye
PS.
You might also have a look at the documentation at http://service.sap.com/ewa -> Media Library
Message was edited by: Riccardo Escher

EP 7 systems in Solution Manager 7 for EWA activation

Dear Expert,
Greetings from Partha.
I need to include our EP 7 systems in Solution Manager 7 for EWA activation. Current lanscape scenario
Solution Manger 7.00 Installed
EP 7.00 Installed
No central SLD configured and all the system have local SLD.
1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
Help will be appreciated.
Regards,
Partha

1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
Check the pdf attached in note 1234387 - Inst. 7.1 EhP1 - Diagnostics Agent installation
If you have SP17, you must follow note 1357812 and install Diagnostics Agent 7.01 SR1
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
It doesn't matter what strategy you'll decide. You could decide Direct Solution Manager registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
As you have solution Manager SP17, you can't install Saphostagent 7.11 and for this reason you can't use SAphostagent.
Agent 7.01 => No Saphostagent
Agent 7.11 => Must install saphostagent
Agent 7.20 => Already have SAPhostagent installed

Which jar file to include for oracle.jdeveloper.webservices.runtime.Wrapped

I am trying to make a Web Service client on my jakarta tomcat server....
I used JDeveloper for generating my client .java file but i dont know which jar to include for oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.
Somebody pls tell me which jar file i need to copy for this thing to run successfully .... thx

Hi,
After compatibility problems between stub generated with JDeveloper 10.1.3 and Oracle Application Server 10g (9.0.4), i decide to downgrade the project to JDeveloper 10.1.2, then more problems... the wsdl wich JDeveloper 10.1.3 accept perfectlly was not so well interpreted by JDev 10.1.2, and i have to do some adjustments on wsdl, then the code generated didn´t format well the soap message (namespaces).....and i made my self some code at the stub class....uffff.
Now I have the java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub when the application run´s at the Application Server, and yes i include the jdev-rt.jar (included on 'JDeveloper Runtime' library)
Any clues (changing the technology is not an option ...for now)?
Thank´s

How can we stop generating spools for some batch jobs?

HI guys,
Is memory will be occupied in SAP during spool generation from batch jobs ?
If yes, to reduce occupied memory, we want to stop generating spools for few batch jobs. Please suggest me the way how we can acheive this.(Step details)
Please help me.
Thanks in Advance.
Regards,
Sahil

Stopping the spool generation for background jobs will not help you to reduce the memory load.
First check what is the total memory utilization and type of processes where the memory is being utilized more.
EWA can give you better idea to get the above details.
Spooling concept doesn't eat that much of memory what you are expecting.
Regards,
Nick Loy

Is table maintenance generator only for custom table?

hi ,
i have doubt is table maintenance generator only for custom table?

hi swamya,
Table Maintanance Generator is used to create/change/delete table entries in a particular table.
In the production system, end-users will not be having access to transaction codes like SE11 and SE16. Developers will not be having access to many transaction codes including the above two.To view the contents of the database table, we will use SE16n in Production system. All these authorizations will be maintained by BASIS team, by creating access profiles.So in order to edit or create the contents of a database table, we should go for table maintenance generator. In real time, authorizations will be maintained in production system.
The second reason is, we can edit or create multiple entries at a time, using tablemaintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance screen SM30.
hope this helps in clearing ur doubt.
Regards
Saurabh

Creating Includes for Function Modules

Hi Experts,
Can you please let me know how to create includes for function modules.
I came across this in a standard include program, which was generated by a function library. The includes inside this program where linked to the function modules (when I double clicked on them).
Please let me know how to create it.
Thanks in advance !
Regards,
Anand Patil.

Hi,
have a look at the code for better understanding
Declaration of Workareas                                             *
DATA: lwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create,
        lwa_data         TYPE edidd, " Work area for IDOC
        lwa_control      TYPE edidc. " Work Area for control rec
Read the control data information of idoc.
loop at idoc_contrl INTO lwa_control Where mestyp = lc_mbgmcr.
Extract the data from the segments.
    LOOP AT idoc_data INTO lwa_data
    WHERE docnum = lwa_control-docnum and
          segnam = lc_item_create.
*->> Set the tabix of the internal table
      lv_index = sy-tabix.
Move the Material Document Item Segment data
      MOVE lwa_data-sdata TO lwa_e1bp2017_gm_item_create.
Modify the material document item data internal table
      PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create.
*->> set the changed values to the IDOC SDATA
      MOVE lwa_e1bp2017_gm_item_create TO lwa_data-sdata.
*->> Modify the table
      MODIFY idoc_data FROM lwa_data index lv_index.
Clear the Work areas
      CLEAR : lwa_data,
              lwa_e1bp2017_gm_item_create.
    ENDLOOP.                                     "LOOP AT t_idoc_data
Call the BAPI function module to create the
appropriate Material Document
    CALL FUNCTION 'BAPI_IDOC_INPUT1'
      EXPORTING
        input_method          = input_method
        mass_processing       = mass_processing
      IMPORTING
        workflow_result       = workflow_result
        application_variable = application_variable
        in_update_task        = in_update_task
        call_transaction_done = call_transaction_done
      TABLES
        idoc_contrl           = idoc_contrl
        idoc_data             = idoc_data
        idoc_status           = idoc_status
        return_variables      = return_variables
        serialization_info    = serialization_info
      EXCEPTIONS
        wrong_function_called = 1
        OTHERS                = 2.
    IF sy-subrc = 1.
      RAISE wrong_function_called.
    ENDIF.
endloop.
ENDFUNCTION.
here when we write the statment
PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create and double click on sub_modify_idocdata .
it will create a include with the name "LZDTSINT052F_GPOMS_GMF01 ".
now we can write the FORM ..END FORM In this inculde.like this.
***INCLUDE LZDTSINT052F_GPOMS_GMF01 .
*&      Form sub_modify_idocdata
Modify the material document item data internal table
FORM sub_modify_idocdata
CHANGING pwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create.
contant declaration
CONSTANTS: lc_261(3) TYPE c VALUE '261'.
DATA : lv_aplzl LIKE resb-aplzl,
         lv_aufpl LIKE resb-aufpl,
         lv_subrc LIKE sy-subrc,
         lv_charg LIKE resb-charg,
         lv_uom LIKE pwa_e1bp2017_gm_item_create-entry_uom.
CLEAR: pwa_e1bp2017_gm_item_create-reserv_no,
         pwa_e1bp2017_gm_item_create-res_item.
*->> Get SAP storage bin & Storage type from the Z table
SELECT lgtyp lgpla
    INTO (pwa_e1bp2017_gm_item_create-stge_type,
          pwa_e1bp2017_gm_item_create-stge_bin)
     UP TO 1 ROWS
    FROM zdtsint050_sttyp
     WHERE zstorage_typ = pwa_e1bp2017_gm_item_create-stge_type
      AND zstorage_bin = pwa_e1bp2017_gm_item_create-stge_bin.
ENDSELECT.
IF sy-subrc NE 0.
    CLEAR: pwa_e1bp2017_gm_item_create-stge_type,
           pwa_e1bp2017_gm_item_create-stge_bin.
ENDIF.
PERFORM get_oper CHANGING pwa_e1bp2017_gm_item_create.
Get the Reservation number and Reservation item number
basing on the idoc data.
SELECT rspos werks lgort
         INTO (pwa_e1bp2017_gm_item_create-res_item,
              pwa_e1bp2017_gm_item_create-plant,
                 pwa_e1bp2017_gm_item_create-stge_loc)
         FROM resb
         UP TO 1 ROWS
         WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
         AND   matnr = pwa_e1bp2017_gm_item_create-material
         AND   charg = pwa_e1bp2017_gm_item_create-batch
         AND   aufnr = pwa_e1bp2017_gm_item_create-orderid
         AND   vornr = pwa_e1bp2017_gm_item_create-activity
         AND   bwart = lc_261.
ENDSELECT.
IF sy-subrc <> 0.
Start of insertion for R31K993797
    CLEAR lv_charg.
    SELECT rspos werks lgort
         INTO (pwa_e1bp2017_gm_item_create-res_item,
              pwa_e1bp2017_gm_item_create-plant,
                 pwa_e1bp2017_gm_item_create-stge_loc)
         FROM resb
         UP TO 1 ROWS
         WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
         AND   matnr = pwa_e1bp2017_gm_item_create-material
         AND   charg = lv_charg
         AND   aufnr = pwa_e1bp2017_gm_item_create-orderid
         AND   vornr = pwa_e1bp2017_gm_item_create-activity
         AND   ( splkz = 'X' or
                 splkz = space )
         AND   bwart = lc_261.
    ENDSELECT.
    IF sy-subrc <> 0.
End of insertion for R31K993797
      SELECT SINGLE werks lgort
            INTO (pwa_e1bp2017_gm_item_create-plant,
                   pwa_e1bp2017_gm_item_create-stge_loc)
            FROM resb
            WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no.
      CLEAR : pwa_e1bp2017_gm_item_create-reserv_no,
              pwa_e1bp2017_gm_item_create-res_item.
    ENDIF.
ENDIF.
get SAP UOM
SELECT SINGLE zsap_uom
                INTO lv_uom
                FROM zca_uom_conv
                WHERE zext_uom = pwa_e1bp2017_gm_item_create-entry_uom.
IF sy-subrc = 0.
    pwa_e1bp2017_gm_item_create-entry_uom = lv_uom.
ENDIF.
ENDFORM.                    " sub_modify_idocdata
*&      Form get_oper
     Get the operation
     <--P_PWA_E1BP2017_GM_ITEM_CREATE_RE Segment
FORM get_oper CHANGING p_pwa_e1bp2017_gm_item_create TYPE
               e1bp2017_gm_item_create.
DATA : l_aufpl LIKE afko-aufpl,
         l_aplzl LIKE afvc-aplzl.
REFRESH : i_op.
UNPACK p_pwa_e1bp2017_gm_item_create-orderid TO
         p_pwa_e1bp2017_gm_item_create-orderid.
Get the reservation and routing number for the order
SELECT SINGLE
         rsnum
         aufpl
         FROM afko
         INTO (p_pwa_e1bp2017_gm_item_create-reserv_no,
               l_aufpl)
         WHERE aufnr = p_pwa_e1bp2017_gm_item_create-orderid.
IF sy-subrc = 0.
    CALL FUNCTION 'CONVERSION_EXIT_NUMCV_INPUT'
      EXPORTING
        input = p_pwa_e1bp2017_gm_item_create-activity
      IMPORTING
        output = p_pwa_e1bp2017_gm_item_create-activity.
ENDIF.
ENDFORM.                    " get_oper
Regards,
nagaraj

Include for function module

Dear Gurus,
Could you explain me why is an include generated for a function module?
After I write a function module, to use this function module, how should I use the generated include?
Regards
Suzie

Hi,
The FM code is stored in the INCLUDES.
go to SE37- give the FM
u can c the code of the FM.
There u will get the import and export parameters.
if you know the import paramaters u can run the program there itself and test the ouput.
hope u got an idea
Rgds
Anver

RFC SAPOSS for EWA Error

Dear Gurus,
I'll tested the connection using SM59 and this below error occured.
I think,the connection is Ok before ,but don't know what happen.Where i need to check and fix it.
For OSS connection to SAP or PUBLIC its OK.No errors.Only for EWA group.
Enclosed are the details:-
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: Group EWA not found
Error Details     LOCATION: SAP-Server akne-sapdev_ECD_00 on host akne-sapdev (wp 1)
Error Details     DETAIL: LgIGroupX
Error Details     COMPONENT: LG
Error Details     COUNTER: 29
Error Details     MODULE: lgxx.c
Error Details     LINE: 4299
Error Details     RETURN CODE: -6
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Sep 01 10:34:42 2009
Error Details     VERSION: 5
Please lemme know the solution.
Thanks & Regards
Shah

Hi,
Can you elaborate the problem/
Are you facing the error while connecting to the RFC for SAP OSS in SM59?
Are you facing the issue while generating the EWA report?
Pls clarify.
Regards,
Raja. G

Report generating tool for labview v.10.0

Hi,
I'm using labview 10.0, I need report generating tool for the same. I downloaded RGT 2012 & 2013 but it is not working with the labview V10.0. Let me know the link to download RGT 2010.

Hello RKN,
If the serial number(s) currently associated with your ni.com account include licenses for the RGT 2010, then you should be able to access it via ni.com/downloads
Only the most recent version of the software will be available for "evaluation" download, so if you're looking for an older version you'll need to get it through ni.com/downloads or off of physical media (discs).
If you're not seeing the 2010 version, I would check that the serial number you're using for 2010 is registered to your account - this might be different from the 2012/2013 serial number. Do you see LabVIEW 2010 available as an option for download on this page?
If the serial number is the same and you're not seeing LabVIEW 2010 or the RGT 2010 on ni.com/downloads, I'd contact your NI sales representative or [email protected]
Regards,
Tom L.

Can I generate documentation for a JAR ?

HI,
I have the sources in a jar. Can I generate JavaDoc for the package without first extracting the jar ?
If yes, could you provide the command line syntax ?
Thank you,
Vlad Grama.

From the JDiff (http://www.jdiff.org) docs:
JDiff also includes a script to use the classdoc application from
http://classdoc.sourceforge.net or http://www.jensgulden.de, by Jens Gulden,
[email protected], to call a doclet such as jdiff on a .jar file rather than on source.
~Matt

Elements 13 Generating Thumbnails for 3 Days?

I have Elements 13 now installed and it has been generating thumbnails for 3 days. I have about 12,500 photos including both RAW and JPG types.
This is on an overclocked system running at 4.5 GHz with 16 GB of memory. After the 3 days of run time, I just clicked on a different folder in the explorer pane of Elements and the program crashed.
This is turning in to a problematic upgrade.
Is this normal?

I uninstalled and reinstalled the application and it appeared to resolve the issue.
Thank you for checking in...
Dale

How to generate XML for following?

Hello Everyone,
I have following snippet of PLSQL code with for loops and record type arrays. Each loop can return separate number of rows and iterate that many times. For e.g. the for loop tab_rec may fetch 50 rows where as the for loop sql_rec may return 80 rows.
I need to acoomodate all of these record arrays into a single xml file. Each for loop will repreesent one data set. Something like this.
<dataset>
<set value = tab_rec(kounter).tvalue >
<set value = ?
</dataset>
Questions:
1) How can I dynamically generate just one single XML file for all for loops metnioend below in this message?
2) How can I dynamically generate tags for e.g. <set> tag above if I put XMLELEMENT() under a for loop kounter. To explain this in a better way consider pseudo code example below.
for i in 1..kounter loop
<dataset>
<set value = tab_rec(i).tvalue >
*<set value = *?* -- How do i generate these <set> tags when tebrec(i).value will return many rows?*_
</dataset>
Thanks for reading this post. Again, the exmple for loops to generate one single XML file is given below.
For loops in the issue are mentioned below
FOR a IN tab_recc
LOOP
tab_rec (tab_kounter).tsegment := a.ebs_table;
tab_rec (tab_kounter).tbytes := a.sizemb;
tab_kounter := tab_kounter + 1;
END LOOP;
FOR b IN sql_recc
LOOP
sql_rec (sql_kounter).thash := b.hash_value;
sql_rec (sql_kounter).texecution_read := b.reads_per_execution;
sql_kounter := sql_kounter + 1;
END LOOP;
FOR c IN sess_recc
LOOP
sess_rec (session_kounter).tsid := c.SID;
sess_rec (session_kounter).tvalue := c.VALUE;
session_kounter := session_kounter + 1;
END LOOP;
FOR d IN user_recc
LOOP
user_rec (dbuser_kounter).tphysical_reads := d.physical_reads;
user_rec (dbuser_kounter).tuser := d.username;
dbuser_kounter := dbuser_kounter + 1;
END LOOP;
FOR e IN ebs_user
LOOP
ebs_rec (ebs_kounter).tuser := e.user_name;
ebs_rec (ebs_kounter).ttime := e.rtime;
ebs_kounter := ebs_kounter + 1;
END LOOP;

Sorry for delay in response.
I have pasted the complete code that will show the relation ship between data and XML. What I am trying to do here is to prepare smal packets of XML through XML element and then roll it up to a final grand CLOB variable. and pass that through XML creation. I have used DBMS_JAVA package to append clobs.
The issue now I am running into, it generates JUNK in xml. pure junk and nothing else Thanks R,
FOR a IN tab_recc
LOOP
tab_rec (tab_kounter).tsegment := a.ebs_table;
tab_rec (tab_kounter).tbytes := a.sizemb;
tab_kounter := tab_kounter + 1;
END LOOP;
FOR b IN sql_recc
LOOP
sql_rec (sql_kounter).thash := b.hash_value;
sql_rec (sql_kounter).texecution_read := b.reads_per_execution;
sql_kounter := sql_kounter + 1;
END LOOP;
FOR c IN sess_recc
LOOP
sess_rec (session_kounter).tsid := c.SID;
sess_rec (session_kounter).tvalue := c.VALUE;
session_kounter := session_kounter + 1;
END LOOP;
FOR d IN user_recc
LOOP
user_rec (dbuser_kounter).tphysical_reads := d.physical_reads;
user_rec (dbuser_kounter).tuser := d.username;
dbuser_kounter := dbuser_kounter + 1;
END LOOP;
FOR e IN ebs_user
LOOP
ebs_rec (ebs_kounter).tuser := e.user_name;
ebs_rec (ebs_kounter).ttime := e.rtime;
ebs_kounter := ebs_kounter + 1;
END LOOP;
FOR aa IN 1 .. tab_kounter
LOOP
if aa = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id1 AS "Id"),
XMLELEMENT ("set",
xmlattributes (aa AS "Id",
tab_rec (aa).tsegment AS "value"
).getclobval ()
INTO tablob --clob type
FROM DUAL;
end if;
END LOOP;
FOR bb IN 1 .. sql_kounter
LOOP
if bb = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id2 AS "Id"),
XMLELEMENT ("set",
xmlattributes (bb AS "Id",
sql_rec (bb).thash AS "value"
).getclobval ()
INTO sqlob --clob type
FROM DUAL;
end if;
END LOOP;
FOR cc IN 1 .. session_kounter
LOOP
if cc= 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id3 AS "Id"),
XMLELEMENT ("set",
xmlattributes (cc AS "Id",
sess_rec (cc).tsid AS "value"
).getclobval ()
INTO sesslob --clob type
FROM DUAL;
end if;
END LOOP;
FOR dd IN 1 .. dbuser_kounter
LOOP
if dd = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id4 AS "Id"),
XMLELEMENT ("set",
xmlattributes (dd AS "Id",
user_rec (dd).tuser AS "value"
).getclobval ()
INTO dbulob --clob type
FROM DUAL;
end if;
END LOOP;
FOR ee IN 1 .. ebs_kounter
LOOP
if ee = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id5 AS "Id"),
XMLELEMENT ("set",
xmlattributes (ee AS "Id",
ebs_rec (ee).tuser AS "value"
).getclobval ()
INTO ebslob --clob type
FROM DUAL;
end if;
END LOOP;
SELECT XMLELEMENT
("Chart",
xmlattributes (v_caption AS "caption",
v_subcaption AS "shownames",
v_xaxisname AS "showvalues",
v_yaxisname AS "decimals"
XMLELEMENT ("categories",
XMLELEMENT ("category",
xmlattributes (v_label1 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label2 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label3 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label4 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label5 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label6 AS "label")
tablob, --clob type
sqlob, --clob type
sesslob, --clob type
dbulob, --clob type
ebslob --clob type
).getclobval ()
INTO v_top50 --clob type
FROM DUAL;
DBMS_LOB.append (v_xmlmessage, v_top50); --both are clob type
v_filename := 'Top50.xml';
writexml (p_dir_path => v_dir_path,
p_filename => v_filename,
p_xml => v_xmlmessage
);

Dump:Generate Includes for sdccn for EWA

Similar Messages

Maybe you are looking for