Dump GETWA_NOT_ASSIGNED during execution of SM:EXEC SERVICES

Hi all,
since i've installed SPS17 for SolMan 7.0 I can not process CPH and EWA data for the
availability service level reporting.
I always get the following shortdump:
GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned
Termination occurred in the ABAP program "RDSVASAEC_ROOT_____________054" - in
"ACTION_109".
The main program was "RDSMOPBACK_AUTOSESSIONS ".
The problem is with the FIELD-SYMBOLS: <fieldno> TYPE ANY.
Any ideas?
Regards
Mario

Hi Mario,
I would recommend to open a customer message on SV-SMG-MON-SLR.
- Mention, that you have already replaced the service definitions.
- Open the connection and provide logon data.
(I found the hint in old customer message, but I had also doubt, that this will not solve the dump. The type of dump does not fit to the "dump caused by old service defininitions".
Best regards,
Ruediger

Similar Messages

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

At least one service session failed during job SM:EXEC SERVICES

Hello everyone.
I'm have problem with job "SM:EXEC SERVICES" in my System: SolutionManager 7.1 SPS12.
Number of sessions to process in parallel: 5
Child job SM:EXEC_MULT_SES_1 started
Displaying log of child job SM:EXEC_MULT_SES_1
Step 001 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000060, user ID SOLMAN_BTC)
Trying to perform session EA0010000000001
Error (shown below) in session EA0010000000001. Hints on analysis in SAP Note 700518
Error message: An exception occurred that was not caught.
Session EA0010000000001 not performed
Step 002 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000061, user ID SOLMAN_BTC)
Trying to perform session VE0010000000002
Error (shown below) in session VE0010000000002. Hints on analysis in SAP Note 700518
Error message: An exception occurred that was not caught.
Session VE0010000000002 not performed
ABAP DUMP "Error analysis":
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
Program for actions in check group &EW_ROOT& version &50079& not found
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program
"CL_DSVAS_PROC_CHECK_GROUP=====CP",
specifically in line 25 of the (include) program
"CL_DSVAS_PROC_CHECK_GROUP=====CM00A".
The cause of the exception was:
Program /1AGS/AEW_ROOT_____________079 does not exist
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was
   not caught and
therefore caused a runtime error.
The reason for the exception is:
Program for actions in check group &EWAFS_ROOT& version &50007& not found
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program
   "CL_DSVAS_PROC_CHECK_GROUP=====CP",
specifically in line 25 of the (include) program
   "CL_DSVAS_PROC_CHECK_GROUP=====CM00A".
The cause of the exception was:
Program /1AGS/AEWAFS_ROOT__________007 does not exist
i'm was trying find program "/1AGS/AEWAFS_ROOT__________007" and "/1AGS/AEW_ROOT_____________079" in SE80, but to no avail.
Full job report and dumps in attachment.
Kernel release    721
Compilation       Linux GNU SLES-11
Sup.Pkg lvl.      401
ABAP Load         1780
CUA load          39
Mode              opt
SAP_BASIS
702
0015
SAPKB70215
SAP Basis Component
SAP_ABA
702
0015
SAPKA70215
Cross-Application Component
CTS_PLUG
200
0013
SAPK-20013INCTSPLUG
SAP CTS Plugin
PI_BASIS
702
0015
SAPK-70215INPIBASIS
Basis Plug-In
ST-PI
2008_1_700
0011
SAPKITLRDK
SAP Solution Tools Plug-In
BI_CONT
707
0007
SAPK-70707INBICONT
Business Intelligence Content
GW_CORE
200
0008
SAPK-20008INGWCORE
SAP GW CORE 200
SAP_BS_FND
702
0013
SAPK-70213INSAPBSFND
SAP Business Suite Foundation
SAP_BW
702
0015
SAPKW70215
SAP Business Warehouse
UISAPUI5
100
0007
SAPK-10007INUISAPUI5
SAP UI5
UI_INFRA
100
0007
SAPK-10007INUIINFRA
SAP UI INTEGRATION INFRASTRUCTURE
IW_GIL
100
0004
SAPK-10004INIWGIL
Generic Interaction Layer
SAP_AP
700
0031
SAPKNA7031
WEBCUIF
701
0012
SAPK-70112INWEBCUIF
SAP Web UI Framework
BBPCRM
701
0012
SAPKU70112
BBPCRM
CPRXRPM
500_702
0011
SAPK-50011INCPRXRPM
SAP Portfolio and Project Management 5.0 (ABAP)
IW_BEP
200
0008
SAPK-20008INIWBEP
Backend Event Provider
IW_FND
250
0008
SAPK-25008INIWFND
SAP IW FND 250
ST
710
0012
SAPKITL712
SAP Solution Manager Tool
ST-BCO
710
0010
SAPK-71010INSTBCO
BI Content for SAP Solution Manager
RTCISM
100
0000
Integration into SAP IT Infrastructure Management
SOCO
101
0003
SAPK-10103INSOCO
SAP Solution Composer Server
ST-A/PI
01R_700
0001
SAPKITAB7N
Application Servicetools for SolMan 7.0-
ST-ICC
200
0001
SAPK-20001INSTICC
Innovation Control Center
ST-ICO
150_700
0043
SAPK-15087INSTPL
SAP Solution Manager Implementation Content
ST-SER
701_2010_1
0025
SAPKITLOSP
SAP Solution Manager Service Tools

Hi,
Try this.
Run RAGS_DSWP_SERV_CONTENT_RESET in Se38 and seclect "Remove content completely"
Goto AGS_UPDATE and apply the updates again and make sure that all is are green.
Open the EWA session that was dumping and reset session component.
Regards,

SM:EXEC SERVICES JOB CANCELLED with MESSAGE_TYPE_X dump

In SAP solution manager server SM:EXEC SERVICES job is Cancelling
Hence we are unbale to get the EWA reports...
Error:
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant
&0000000001009, user ID RAOP)
Solution OC Application Monitoring is being edited (Operations)
Trying to perform session 5000000003618
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Applied note 727998 but no use... please help me .
Regards
Prabhakar
Version details:
ST-SER 620-2006_2
PI_ BASIS 2005_1_620

Hi Prabhakar,
Which SP of Solman are you using? If you are using Solman SP12 then the ST-SER has to be upgraded to higher version. Also update the PI_BASIS component.
ST-SER 700_2007_1
PI_BASIS 2006_1_700.
Regards,
Raghavendra.

Problem in SM:EXEC SERVICES job.

Hi Experts,1. SM:EXEC SERVICES job is getting cancelled in our solution manager system,
After checking the job log I found out that Job is getting cancelled with ABAP dump SYNTAX_ERROR
2. I checked for the ABAP dump and found that job is getting dump when trigerring Standard SAP program
RDSVASCEW_DBORA____________060. I checked for any OSS notes in service market place but could not fix...
3. I tried manually doing syntactical check for the program but it is getting syntax error in
INCLUDE report "/1CAGTF/IF_LOGFUNC_000498" not found.
If some body could advice on the issue, it would be great help !! Thanks
Let me know if I need to provide more details on the problem.
Regards, Amber S

>
Ruediger Stoecker wrote:
> This is not required for the mentioned dump. The dump pattern is well known
>
> Just follow the instructions of SAP Note 727998 (which has been already recommended above). It's the standard answer and it's always recommended. It will solve the SYNTAX_ERROR.
If the dump pattern is well known, the reason behind the dump or to replace service definitions should have been explained.
Some of the programs (e.g.'RDSVASAEW_ROOT_____________027', 'RDSVASAEW_DBORA____________032') used in the SAP Solution Manager cannot be generated anymore. During the attempt to generate them, the system generates the following error: 'GEN_TOO_MANY_CBS, generation error: Too many DATA control blocks generated', 'Field "OMS_VERSIONS000910" unknown'.
Check this note.
525097
-=-Ragu

SM:EXEC SERVICES job getting failed in Solution manager

HI All,
SM:EXEC SERVICES job getting failed in solution mnager and job log will be fowlloing:
01-31-2012 19:09:21 Job started
01-31-2012 19:09:21 Step 001 started (program RDSMOPBACK_AUTOSESSIONS_ALL, variant , user ID BASISUSER)
01-31-2012 19:09:21 MemSize Begin = 796480 Bytes
01-31-2012 19:09:21 *******************************
01-31-2012 19:09:21 MemSize Begin = 1919120 Bytes
01-31-2012 19:09:23 Solution <000000106120000> "SID..." is being edited (Operations)
01-31-2012 19:09:23 <000000106120000> "SID..."(Operations)
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 0 bytes
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 690 us time
01-31-2012 19:09:23 Trying to perform session EC2000000001313
01-31-2012 19:09:24 MODEL_KEY: SID Installation Number: 6 MODEL_MODE: E MODEL_VERSNR 00001 MODEL_CLASS: EWA Data Model
01-31-2012 19:09:30 Definition nicht vorhanden
01-31-2012 19:09:33 Definition nicht vorhanden
01-31-2012 19:09:45 Internal session terminated with a runtime error (see ST22)
01-31-2012 19:09:45 Job cancelled
St22 Dump:
The exception 'CX_DSVAS_API_CONTEXT_INSTANCE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLDSVAS_PROC' has to be
terminated.
Please suggest how to proceed further and provide your valuble inputs
Thanks
Nekkalapu

HI Siva,
I have done the changes according the note but still same problem.
Please suggest any other ways to resolve this issue .
Advance thanks
Regards
Nekkalapu

Error: Action "Install_WatsonX86_Cpu32_Action" threw an exception during execution

During install of SqlServer Express 2008 (also I tried Developer Edition 2008 R2 with same error) I have error:
2014-05-01 17:13:52 Slp: Running Action: Install_WatsonX86_Cpu32_Action
2014-05-01 17:13:52 Slp: Error: Action "Install_WatsonX86_Cpu32_Action" threw an exception during execution.
2014-05-01 17:13:52 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: C:\WINDOWS\Installer\7affd.msi ---> System.IO.FileNotFoundException: C:\WINDOWS\Installer\7affd.msi
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp:    --- Конец трассировки внутреннего стека исключений ---
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()Error: Action "MsiTimingAction" threw an exception during execution.
2014-05-01 17:13:52 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: C:\WINDOWS\Installer\7affd.msi ---> System.IO.FileNotFoundException: C:\WINDOWS\Installer\7affd.msi
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp:    --- Конец трассировки внутреннего стека исключений ---
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp: Received request to add the following file to Watson reporting: C:\Documents and Settings\me\Local Settings\Temp\tmp1C4.tmp
2014-05-01 17:13:52 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2014-05-01 17:13:52 Slp: Inner exceptions are being indented
2014-05-01 17:13:52 Slp:
2014-05-01 17:13:52 Slp: Exception type: System.IO.FileNotFoundException
2014-05-01 17:13:52 Slp:     Message:
2014-05-01 17:13:52 Slp:         C:\WINDOWS\Installer\7affd.msi
2014-05-01 17:13:52 Slp:     Stack:
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet
propertyId)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet
propertyId)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia,
InstallAction pkgAction)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:56 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-05-01 17:13:56 Slp: Sco: Unable to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_, Win32 error
2
2014-05-01 17:13:56 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-05-01 17:13:56 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-05-01 17:13:56 Slp: Sco: Unable to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_, Win32 error 2
I checked C:\WINDOWS\Installer\ for "7affd.msi" - there is no such file. Also I checked same folder on Win7-64 machine and Notebook WinXP-Pro - there is no such file. I was able to install Express on both Win7-64 and Notebook, but not on this machine.
I've tried searching for "7affd.msi" on internet without luck. Also I removed all Visual Studio Express 2010 and used any "Fix-It" utilities to check files and registry. And still have same error.
How to fix it?

Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -819060177
Exit facility code:            1838
Exit error code:               8751
Exit message:                  C:\WINDOWS\Installer\7affd.msi
Start time:                    2014-05-01 21:16:41
End time:                      2014-05-01 21:17:00
Requested action:              ComponentUpdate
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_211629\Detail_ComponentUpdate.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xCF2E222F
Machine Properties:
Machine name:                  3R-XP
Machine processor count:       4
OS version:                    Windows XP
OS service pack:               Service Pack 3
OS region:                     Россия
OS language:                   русский (Россия)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         j:\85c0db9df26d4ae0b40b522d393a\x86\setup\
Installation edition:          EXPRESS
User Input Settings:
ACTION:                        ComponentUpdate
CONFIGURATIONFILE:
HELP:                          False
INDICATEPROGRESS:              False
MEDIASOURCE:                   j:\85c0db9df26d4ae0b40b522d393a\
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_211629\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_211629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.IO.FileNotFoundException
    Message:
        C:\WINDOWS\Installer\7affd.msi
    Data:
      DisableWatson = true
    Stack:
        в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet propertyId)
        в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet propertyId)
        в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
        в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
        в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
        в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
        в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

Solution Manager - Error when executing Job SM:EXEC SERVICES

Hi,
I am trying to get the data from the earlywatch alert report and when i start the job SM:EXEC SERVICES.
The jobs starts but i get an error during is execucion:
Runtime errors         SYNTAX_ERROR
       Occurred on     17.01.2008 at   14:06:28
Syntax error in program "RDSVASAEW_DBMSS____________052 ".
What happened?
The following syntax error occurred in the program
RDSVASAEW_DBMSS____________052 :
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
Error in ABAP application program.
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
I tried to generate all the function modules and i get this error:
Logical function: MSQ_TEMPDB_DOWNLOAD            :
Error      1 during generation of /1CAGTF/IF_LOGFUNC_000208
Syntax error.
Can you help me on this error?
Best regards,
Nuno Silva

Hi Pedro,
I insert my answer from a similar thread.
As a pitty, that's a well known error.
Please check [SAP Note 727998|http://service.sap.com/sap/support/notes/727998]
Basically, these three steps needs to be performed:
1) BDL_DELETE_ALL_TABLES
2) SDCCN - Refresh Service Definitions
3) Generate Logfuncs
SE37: /BDL/_GENERATE_LOGFUNCINCLUDES
OPTION: ALL
It's also described in the Implementation Guide (IMG), transaction SPRO in the SAP Solution Manager system:
SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Service Data Control Center
-> Activate the Service Data Control Center in the Solution Manager
-> Generate Includes for Service Data Contol Center
With the next ST-PI Support Package. The steps can be triggered via the menu of transaction SDCCN.
Best regards,
Ruediger Stoecker

SM:EXEC Services is failed

Hi!
I am about to start backgroud job SM:EXEC Services in order to see my EWA from Tcode DSWP.
I started the job as SAP* or DDIC and
receive the following <b>error :ABAP-Processor: Syntax error</b>
(step 001 started)(Program RDSMOPBACK_AUTOSESSIONS, ...)
Has perhaps some one the same error or know how to proceed?
Thank you very much indeed
regards

Hi!
Thank you!
Here is the error from SM:EXEC SERVICES job:
Short text: Syntax error in program "RDSVASAEW_ROOT_____________073 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_ROOT_____________073
     " in include "RDSVASAEW_ROOT_____________073 " in
    line 197:
    "Feld "FB_DLDINSTPAR_TAB001155" unbekannt. Es existiert aber ein Feld m"
    "it dem ähnlichen Namen "FB_DLDINSTPAR_TAB000807"."
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RDSVASAEW_ROOT_____________073".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Thank you very much for your further help/information
regards

A Windows Workflow Foundation workflow failed during execution

Needed to know if there was some way to identify what the workflow was that is causing this error? I see this: "Workflow Identifier: 0cb64340-3a44-009e-67af-70963215b839" just not sure what SMLet I can use to see what this corresponds too.
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          1/2/2013 1:56:56 PM
Event ID:      33880
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      scsm
Description:
A Windows Workflow Foundation workflow failed during execution.
Workflow Type: Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow
Workflow Identifier: 0cb64340-3a44-009e-67af-70963215b839
Exception Type: Microsoft.EnterpriseManagement.Common.ObjectNotFoundException
Exception Message: An object of class ManagementPackRelationship with ID 6ec982d4-207f-da19-3bc9-e6d2ff7b067e was not found.
Exception Stack:    at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCache.Get[T](Guid id)
   at Microsoft.EnterpriseManagement.EntityTypeManagement.GetRelationshipClass(Guid id)
   at Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow.prepareNotificationActivity_ExecuteCode(Object sender, EventArgs e)
   at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
   at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
   at System.Workflow.Runtime.Scheduler.Run()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">33880</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-01-02T19:56:56.000000000Z" />
    <EventRecordID>1098867</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>scsm</Computer>
    <Security />
</System>
<EventData>
    <Data>Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow</Data>
    <Data>0cb64340-3a44-009e-67af-70963215b839</Data>
    <Data>Microsoft.EnterpriseManagement.Common.ObjectNotFoundException</Data>
    <Data>An object of class ManagementPackRelationship with ID 6ec982d4-207f-da19-3bc9-e6d2ff7b067e was not found.</Data>
    <Data>   at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCache.Get[T](Guid id)
   at Microsoft.EnterpriseManagement.EntityTypeManagement.GetRelationshipClass(Guid id)
   at Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow.prepareNotificationActivity_ExecuteCode(Object sender, EventArgs e)
   at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
   at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
   at System.Workflow.Runtime.Scheduler.Run()</Data>
</EventData>
</Event>
Help

Everytime I run it I get nothing.
Tried using the workflow identifier: 0cb64340-3a44-009e-67af-70963215b839 and tried this number as well: 6ec982d4-207f-da19-3bc9-e6d2ff7b067e
Both just take me to the prompt with no info.
EVENT ID 33880 Health Service Modules is the event title.
Help

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

Take a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie

How can I show and hide an image or a decoration on the front panel during execution of the vi?

Hello,
I've made a user interface with a little grafic description.
That description should change depending on user actions, e.g. if the user switches a button, some lines should disappear and some other lines should appear.
I thought some decorations could be shown and hidden via something like a property node, but that is not possible. Images can also not be hidden during execution of the program.
Is there any posibility to change a grafic user interface?
Johannes
LV 7.1
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Attachments:
LV_Grafic.JPG ‏21 KB

Thanks to Tim for drawing what I suggested as option while I had some real work to do.
There is a trick of overcoming the index problem that was presented/devloped in the forum in the last month's:
You can place the decoration inside a cluster, so you can use the lable of the cluster to adress the decoration you want. The data type of the cluster doesn't mather for this, so you will hide the control/indicator. And you colour the cluster transparent (hint: right click with the coloring tool and use space to toggle).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

ORA-04088: error during execution of trigger

Error Description :
We have more than 100 of records in a csv file which we are processing through a script. At the first execution let
say it generates trigger exception for five records ... when I execute the script second time those five records
are not throwing any exception but may be some other records. But consecutive trigger exception is not happening for any record . If a particular record is throwing exception at first attempt then in the second attempts it's not throwing the trigger exception.
Input file
PROPRTY_ID,NAME,OLD STREET,CITY,STATE,ZIP,NEW STREET,NEW CITY,NEW STATE,NEW ZIP
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812
Error :
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812 - PROPERTY Update Error : ORA-00001: unique constraint (PROD.PK_AUDIT_LOG) violated
ORA-06512: at "PROD.PROPERTY_AUD", line 159
ORA-04088: error during execution of trigger 'PROD.PROPERTY_AUD'
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> desc property
Name                                      Null?    Type
PROPERTY_ID                               NOT NULL NUMBER(20)
TYPE_CODE                                          VARCHAR2(10)
TYPE_PREFIX                                        VARCHAR2(10)
DWELLING_TYPE_CODE                        NOT NULL VARCHAR2(10)
DWELLING_TYPE_PREFIX                      NOT NULL VARCHAR2(10)
STREET_NUMBER                                      VARCHAR2(25)
STREET_DIRECTION                                   CHAR(2)
STREET_NAME                               NOT NULL VARCHAR2(45)
UNIT_NUMBER                                        VARCHAR2(15)
CITY_CODE                                          VARCHAR2(10)
STATE                                     NOT NULL CHAR(2)
ZIP_CODE                                           VARCHAR2(10)
UNIT_TYPE                                          VARCHAR2(10)
UNIT_PREFIX                                        VARCHAR2(10)
COUNTY_CODE                                        VARCHAR2(10)
COUNTRY_CODE                              NOT NULL VARCHAR2(10)
SQUARE_FEET                                        NUMBER(6)
NUMBER_MOTHER_LAW_UNITS                            NUMBER(6)
YEAR_BUILT                                         DATE
PROPERTY_VALUE                                     NUMBER(12)
ZIP_PLUS_4                                         VARCHAR2(4)
SFI_REQ_FLAG                                       CHAR(1)
LAST_MODIFIED                             NOT NULL DATE
LAST_MODIFIED_BY                                   VARCHAR2(31)
STANDARDIZED_STATUS                                VARCHAR2(10)
STANDARDIZED_DESC                                  VARCHAR2(200)
SQL> desc audit_log
Name                                      Null?    Type
SEQ_NO                                    NOT NULL NUMBER(20)
TABLE_NAME                                         VARCHAR2(31)
USER_STAMP                                         VARCHAR2(31)
TIME_STAMP                                         DATE
TRAN_CODE                                          CHAR(2)
RECORD1                                            VARCHAR2(2000)
RECORD2                                            VARCHAR2(2000)
FLAG_FLD                                           CHAR(1)
SFI_FLAG_FLD                                       CHAR(1)
ERROR_NUMBER                                       NUMBER
Update Query which is getting executed :
UPDATE PROPERTY
SET DWELLING_TYPE_CODE = 'SFR',
DWELLING_TYPE_PREFIX = 'DWELLING',
STREET_NUMBER = NULL,
STREET_DIRECTION = NULL,
STREET_NAME = ln_new_street_name,       -- <From input file>
UNIT_NUMBER = NULL,
CITY_CODE = ln_city_code,               -- <From other Table>
STATE = ln_new_state,                   -- <From input file>
ZIP_CODE = ln_new_zip_code,
UNIT_TYPE = NULL,
UNIT_PREFIX = NULL,
COUNTY_CODE = ln_county_code,           -- <From Other table>
COUNTRY_CODE = 1,
ZIP_PLUS_4 = ln_zip_plus_4            -- <From Input file>
WHERE PROPERTY_ID = ln_property_id;   -- <From Other table>
*NOTE :* Property.LAST_MODIFIED field is auto populate through other trigger. It does not causing any problem.
This might be helpful :
SQL> select OWNER, CONSTRAINT_NAME, TABLE_NAME,COLUMN_NAME from dba_cons_columns where CONSTRAINT_NAME='PK_AUDIT_LOG';
OWNER                          CONSTRAINT_NAME                TABLE_NAME COLUMN_NAME
PROD                           PK_AUDIT_LOG                   AUDIT_LOG          SEQ_NO
PROD_ARCH                      PK_AUDIT_LOG                   AUDIT_LOG          SEQ_NO
SQL> select SEQ_NO, trim(RECORD1), trim(RECORD2),TIME_STAMP
from audit_log where RECORD1 like '%BUTTE%' order by TIME_STAMP;
SEQ_NO
1675677212
TRIM(RECORD1)
00000000000031814095...SFR       .DWELLING ...5512 BUTTE VIEW CT                           ..15532
    .CA.95765     ...1377      .1         .....5000..20100922.SUSMSAHA                       ..
TRIM(RECORD2)
00000000000031814095...SFR       .DWELLING ...5512 BUTTE VIEW CT                           ..15532
    .CA.95765     ...1377      .1         .....5000..20100922.SUSMSAHA                       ..
TIME_STAMP
22-sep-2010
Trigger Body which is fired and throwing the exception :
create or replace trigger PROPERTY_AUD
before insert or update on PROPERTY
for each row
declare
rec1            varchar2(2000);
rec2            varchar2(2000);
tcode           char(1);
ln_seq_id       NUMBER:=Null;
ls_sql VARCHAR2(2000):=Null;
begin
select temp_audit_seq.nextval into ln_seq_id from dual;
rec1 := null;
rec2 := null;
     if user = 'NONREP_USER' then
        return;
     end if;
     if (dbms_reputil.from_remote = FALSE) then
          :NEW.last_modified := sysdate;
          if (user = 'SALESFORCE_SYNC') then
                  :new.last_modified_by := NVL(:new.last_modified_by,USER);
          else
               :new.last_modified_by := user;
          end if;
     end if;
if inserting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'I';
elsif deleting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'D';
else
rec1 :=
LPAD(:old.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:old.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:old.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:old.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:old.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:old.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.STATE, 2, ' ' ) || '.' ||
RPAD(:old.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:old.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:old.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:old.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:old.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:old.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:old.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_DESC, 200, ' ' );
rec2 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'U';
end if;
ls_sql :='
INSERT INTO AUDIT_LOG
( seq_no,
table_name,
user_stamp,
time_stamp,
tran_code,
record1,
record2)
VALUES
( :id,
:s_table_name,
:s_user_name,
:d_sysdate,
:s_tcode,
:s_rec1,
:s_rec2
EXECUTE IMMEDIATE ls_sql
USING ln_seq_id,
'PROPERTY',
user,
sysdate,
tcode,
rec1,
rec2;
end;
Your suggestion is highly appreciated ..
Edited by: Bipul on Sep 23, 2010 12:40 AM

TEMP_AUDIT_SEQ generates number with the increment of +1
Although there seems other sequence populating the AUDIT_LOG table through a different sequence with the increment of +10. So till now there are already 1179 different numbers residing in audit_log.seq_no and yet to be generated by the TEMP_AUDIT_SEQ sequence. I will look into more details.
SQL> select max(seq_no) from audit_log;
MAX(SEQ_NO)
1675689121
SQL> select TEMP_AUDIT_SEQ.nextval from dual;
   NEXTVAL
1675677285
SQL> select count(*) From audit_log where seq_no>1675677285;
COUNT(*)
      1179
SQL> select count(*) from audit_log where seq_no>1675677283 and mod(seq_no,2)=1;
COUNT(*)
      1179
SQL> select seq_no from audit_log where seq_no>1675677283 and mod(seq_no,2)=1 and rownum<12;
    SEQ_NO
1675677291
1675677301
1675677311
1675677321
1675677331
1675677341
1675677351
1675677361
1675677371
1675677381
1675677391
11 rows selected.
Thank you Lee and Herald ten Dam   ...

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

Dump GETWA_NOT_ASSIGNED during execution of SM:EXEC SERVICES

Similar Messages

Maybe you are looking for