Dump "GETWA_NOT_ASSIGNED" while implementing Remodeling
Hello Everyone,
i am trying to add an infoobject 0calweek with constant value using remodeling. while implementing this scenario i encountered with a short dump "GETWA_NOT_ASSIGNED" could anybody suggest any fix to this issue.
Thanks and Regards,
Ajay.D
thanks
Similar Messages
-
Hi Experts,
In the report I am using LDB pnp and outputting results with ALV,
I am using the FM REUSE_ALV_GRID_DISPLAY,
And I am getting the dump GETWA_NOT_ASSIGNED.
The dump I am getting when the FM is executed.
Thanks in Advance.
Regards,
IFFHi,
i faced the same problem some days ago.
jst cleck your fieldcat.
check fields names passed to fieldcat and should be in ' ' and in capital.
This shd solve your problem
Thanks & regards -
Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0
Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT 0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
BalarajThanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
" READ TABLE p_t_mapping ASSIGNING <fs_map>
WITH KEY target_stepid = 0
targetsegid = <fs_posit>-rulesegid
targetposit = <fs_posit>-ruleposit
targetid = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj -
Short Dump GETWA_NOT_ASSIGNED while calling Transaction launcher in IC_WEB
Hi Folks,
We have a problem with Transaction Launcher profile in IC web client , after support pack implementation when i launch few R/3 transaction in Web client profile getting short dump.
when i check ST22 transaction , i found these information in Dump.
!) Error in ABAP application program.
The current ABAP program "CL_CRM_IC_ABOX_ABSTRACT_URL===CP" had to be
terminated because one of the
statements could not be executed.
we came to know below method not executing properly .
CL_CRM_IC_ABOX_ABSTRACT_URL method IF_CRM_IC_ACTION_HANDLER~GET_ACTION_PROPERTY
and also for
CL_CRM_IC_ABOX_CONSTANTS => Object_type
Any could you please advice on the same ....
Regards
raju....Hello Raju,
Please apply the note 1101443. This should help you resolve the issue.
Thanks and Regards,
Varsha -
Dump GETWA_NOT_ASSIGNED while assigning value to a field symbol
LOOP AT <table> INTO <struct>.
CLEAR l_uom.
lf_fieldname = '<struct>-UOM'.
ASSIGN (lf_fieldname) TO <uom>.
l_uom = <uom> .
ENDLOOP.I need to put the contents of lf_fieldname into <uom>.......when lf_fieldname is <struct>-UOM.....
so
assign lf_fieldname to <uom> is of no use...........and hence v use
assign (lf_fieldname) to <uom>
my problem is since i dont knw till the run time if UOM field is present in the table or not, and whn it's not, no mem_area is referenced in the bkgrnd and hence i get an error...........i need to knw if v have a provision to chk if (lf_fieldname) has ne value or not....
Please help....:)
Regards,
Aparna. -
OO ALV dump - GETWA_NOT_ASSIGNED
Hello Friends,
I have implemented OO ALV to display data. Two of the fields are WERKS and MATNR. These fields are input enabled. I have not coded any F4 routine, the standard search helps work. I have SAP GUI 720 installed on my laptop and the program runs just fine. But when I try to run it on another machine with GUI 710 the search help function does not work and I get the dump GETWA_NOT_ASSIGNED. I may be wrong but it seems like there is a problem with the GUI version. Where should I check?
Thanks in advance,
AliHi,
This is a field catalog issue. check whether you populated field catalog correctly. check the field names and internal table field names and also check the col_pos is correct or not.
ls_fieldcat-col_pos = '1'.
u might be assigned the col_pos same for some fields,
hope this helps u.,
Thanks & Regards,
Kiran -
Logical systems while implementing charm in solution manager
Hello Everybody,
I just wanted to know how many logical systems we need while implementing charm in solution manager 7.0. I have 3 clients in development , 3 clients in Quality and 1 client in production.
Thank you,
vikram.Hi Vikram,
Yes, i1n ChaRM we always work with logical systems, I mean clients.
The standard is:
DEV -> QAS -> PRD
However, you can also use:
- Minimum
DEV -> PRD
- Target groups
DEV -> QAS -> PRD
- > TST
DEV -> QA1 -> QA2 -> PRD
DEV -> QA1 -> PR1
-> QA2 -> PR2
There are a lot of combination possible.
BR
Fernando -
Dump error while creating or double click the info package
Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
SteveHere are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks. -
A problem while implementing a file to file senario
hi all :
There is some problem while implement a file to file senario. the file couldn't be sent or recieved.
and as I try to check Check the Sender File Adapter Status via
Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring ,
It is found that Adapter Engine has error status with red light. Is it why the file couldn't be sent?
Could you please tell me how to make Adapter Engine available?
Thank you very much!!!Hi Sony
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EC1.SystemHome.cnbjw3501 found
No access to get JPR configuration
Along with what experts suggested
What is the type of Business system is this. Standalone Java?
JPR can have problem if you have a business system thats not ABAP/Java type if this system is not having a SAP TS in landscape then create Java type.
Thanks
Gaurav -
ABAP dump Error while creating service order in PCUI.
Hi Experts,
We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors RAISE_EXCEPTION
Date and Time 02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
| function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj PatilHi Thirumala,
Thnaks for the reply.
I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil -
Dump error while running termination action
I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors SYNTAX_ERROR
Date and Time 21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
include "LCACS_BU_PARTNERU44 " in
line 19:
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
"r such tables in a Unicode context."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLCACS_BU_PARTNER :
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program SAPLBUD_CHECK
Include LBUD_CHECKF01
Row 1.129
Module type (FORM)
Module Name RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1 CALL FUNCTION 'BDT_TBZ1F_GET'
2 EXPORTING
3 iv_objcn = gc_objcn_bupa
4 iv_objap = gc_objap_bupa
5 TABLES
6 et_tbz1f = lt_tbz1f
7 EXCEPTIONS
8 not_found = 1
9 OTHERS = 2.
0 READ TABLE lt_tbz1f INDEX 1.
1 IF sy-subrc = 0.
2 CALL FUNCTION 'BUP_PARTNER_GET'
3 EXPORTING
4 i_partner = is_but100-partner
5 i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE ztpkt = 'RLDEL'
AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner = is_but100-partner
i_partnerguid = ls_but000_int-partner_guid
i_role = is_but100-rltyp
i_dfval = is_but100-dfval
i_calltp = iv_calltp
i_valid_from = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to = is_but100-valid_to_dats
i_valid_to_old = iv_valid_to_old
PORTING
e_result = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result. "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik. -
Error while implemention ORDER_SAVE in CRM 2007
Hi,
At present we are experiencing an error while implementing badi ORDER_SAVE for sending CRM (2007)sales order data to PI (7.1) through ABAP proxy. In the BadI implementation we have created the Proxy Object through class (generated while defining the Proxy object in PI) and pass the SO details through the method available.
Error ' Administration header not Found' while saving the CRM sales Order.
Please let me know is any changes done in CRM 2007 for BadI implementation. Also suggest the best way to go forward to resolve this problem.
Thanks & Regards
DebU can do it.. But what i suggest is.. create a Z Function Module that will trigger in background in seperate task by passing the GUID.
In this Z FM write all your code related to the Proxy... -
Problem while implementing OSS note 1077403
Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM -
Can I catch the error instead of the DUMP GETWA_NOT_ASSIGNED ???
Hi:
I have the following code:
FIELD-SYMBOLS: . is executed i got a dump GETWA_NOT_ASSIGNED.
Can I catch the error instead of the dump ?
Thank you
Silviasee the following example to avoid DUMP
PARAMETERS: p_file LIKE rlgrap-filename .
DATA: v_file TYPE string.
DATA: BEGIN OF itab OCCURS 0,
name(23) TYPE c,
END OF itab.
DATA: errormessage TYPE char50.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = ' '
TABLES
data_tab = itab.
RECEIVE RESULTS FROM FUNCTION 'GUI_UPLOAD'
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17 .
break developer.
CASE sy-subrc.
WHEN 0.
errormessage = 'Data Loaded'.
WHEN 1.
errormessage = 'FILE_OPEN_ERROR'.
WHEN 2.
errormessage = 'FILE_READ_ERROR'.
WHEN 3.
errormessage = 'NO_BATCH'.
WHEN 4.
errormessage = 'GUI_REFUSE_FILETRANSFER'.
WHEN 5.
errormessage = 'INVALID_TYPE'.
WHEN 6.
errormessage = 'NO_AUTHORITY'.
WHEN 7.
errormessage = 'UNKNOWN_ERROR'.
WHEN 8.
errormessage = 'BAD_DATA_FORMAT'.
WHEN 9.
errormessage = 'HEADER_NOT_ALLOWED'.
WHEN 10.
errormessage = 'SEPARATOR_NOT_ALLOWED'.
WHEN 11.
errormessage = 'HEADER_TOO_LONG'.
WHEN 12.
errormessage = 'UNKNOWN_DP_ERROR'.
WHEN 13.
errormessage = 'ACCESS_DENIED'.
WHEN 14.
errormessage = 'DP_OUT_OF_MEMORY'.
WHEN 15.
errormessage = 'DISK_FULL'.
WHEN 16.
errormessage = 'DP_TIMEOUT'.
WHEN 17.
errormessage = 'OTHERS'.
ENDCASE.
MESSAGE e000(00) WITH errormessage . -
ECCS Flexible upload dump GETWA_NOT_ASSIGNED
Hi gurus!
I'm trying to upload some financial statements for the ECCS module using transaction CXCD (Data monitor). When i double clic the company to upload the data, using the corresponding method, it returns a dump with a GETWA_NOT_ASSIGNED message in program FICUPL90.
In QAS enviroment it works, but in the sandbox enviroment (which is a copy of the QAS).
Does any body know what can i do?HI
Your issue is relates to below dump
"GETWA_NOT_ASSIGNED" " " "FICUPL90" bzw. "FICUPL_LCL_UPLOAD" "RUN"
then refer the below note.
909439
Regards
Madhu M
Maybe you are looking for
-
Bill and Routing Interface concurrent program is not processing component
Hi All, While running Bill and Routing Interface concurrent program,not processing the component item(Line Item) from bom_inventory_comps_interface,still it show process flag as 1. where as billing item(Header Item) is successfully done..i have tried
-
Hi Gurus, I Have joined in the proejct. When I am executing a report. it is showing the following value in the Business Explorer #/20230401 Though # is not there in the cube. also profit center value is showing like this. ABAD/1443300 May i know the
-
How to download leading zeros from internal table to XL file
Hi, i am dowanloading data from interna table to XL file using GUI_DOWNLOAD FM. i want download the leading zeros also into xl file EX: 012345 at present only "12345" is down loading into XL file. But i want "012345" into XL file. Please help me.
-
Short term need of local country number.
Hi, It does happend that it would be convinent to have a short time usage of a number. I talk about much shorter then 3 months... Some times I wish I hade a number for perhapps just an hour, so that I can be reached on a local phone number in a count
-
Hi, we should size our network (LAN and WAN) bandwidth regarding Oracle database and Oracle Applications that we will install. how to determine Bandwidth ? What is the relation between number of users, number of transactions and bandwidth ? Any Oracl