Dump in a Select query
Hi All,
I am getting a dump & the dump says " TIME LIMIT EXCEEDED". The code as below:-
LOOP AT it_gen1 INTO wa_gen1.
SELECT vbelv posnv
FROM vbfa
INTO TABLE li_vbfa
WHERE vbeln = wa_gen1-bil_number
AND posnn = wa_gen1-itm_number.
DESCRIBE TABLE li_vbfa LINES gv_count .
READ TABLE li_vbfa INDEX gv_count .
IF sy-subrc = 0 .
MOVE: li_vbfa-vbelv TO gv_vbelv1,
li_vbfa-posnv TO gv_posnv.
ENDIF .
CALL FUNCTION 'SD_DOCUMENT_PARTNER_READ'
EXPORTING
i_parvw = 'ZS'
i_posnr = gv_posnv
i_vbeln = gv_vbelv1
IMPORTING
e_vbpa = li_vbpa
e_vbadr = li_vbadr
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
MOVE li_vbpa-kunnr TO wa_gen2-kunnr .
MOVE-CORRESPONDING wa_gen1 TO wa_gen2.
APPEND wa_gen2 TO it_gen2 .
ENDLOOP.
If I use Function Module CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR' before ENDLOOP this will overcome the error says one of my friend.
Is this a feasible solution for this error?
Thanks in dvance....
Hi All,
Thanks for all your inputs. This issue is resolved now. I have used ranges in the select query & removed FOR ALL ENTRIES construct. The select query is working very fastly now with correct data.
The code with the changes as below :-
LOOP AT it_gen1 INTO wa_gen1.
CLEAR r_bil_number.
CLEAR r_itm_number.
r_bil_number-option = 'EQ'.
r_bil_number-sign = 'I'.
r_bil_number-low = wa_gen1-bil_number.
COLLECT r_bil_number.
r_itm_number-option = 'EQ' .
r_itm_number-sign = 'I'.
r_itm_number-low = wa_gen1-itm_number.
COLLECT r_itm_number.
ENDLOOP.
SELECT vbelv
posnv
vbeln
posnn
vbtyp_n
vbtyp_v
FROM vbfa
INTO TABLE li_vbfa
WHERE vbeln IN r_bil_number
AND posnn IN r_itm_number
AND vbtyp_n = c_m.
Regards
Abhii.
Similar Messages
-
Hey Gurus,
i am working on a requirement in which select query is fetching 8 fields from a ZTABLE.
IF NOT IT_ZQAPP1[] IS INITIAL.
SELECT AUFNR VORNR PROBNR PIPENO NVORNR SHIFT
PSTAT PRODAT FROM ZQAPP INTO CORRESPONDING FIELDS OF TABLE IT_ZQAPP_B
FOR ALL ENTRIES IN IT_ZQAPP1
WHERE AUFNR = IT_ZQAPP1-AUFNR
AND WERKS IN P_WERKS
AND PRODAT LE P_PRODAT.
it works fine for lesser data but throws a dump error TSV_TNEW_PAGE_ALLOC_FAILED for entries more than 70000,
and my requirement is to fetch more than a lac record.
Kindly Suggest the corrections.
Thanks in Advance...Hi!
This error occurs typically, when there is no more memory for your ABAP session. This means, you have to do one of the followings:
- restrict your report for smaller intervals, like process only 1 month instead of 6 months together
- rewrite your program, and eliminate/refresh/free the unneccesary internal tables, or columns from internal tables. You might even try to remove unneccesary lines from internal tables
- use SELECT - ENDSELECT instead of SELECT ... INTO statement. This could slower your program, but you'll need less memory usage
Check your memory usage always, with SM04 transaction (Goto - Memory menu).
Regards
Tamá -
Hi Gurus,
I have a select query as follows:
SELECT
vbap~vbeln
vbap~posnr
vbap~matnr
vbap~arktx
vbap~pstyv
vbap~abgru
vbap~prodh
vbap~netwr
vbap~werks
vbap~kwmeng
vbap~prctr
vbap~ps_psp_pnr
FROM vbap
INTO TABLE i_item_vbap
FOR ALL ENTRIES IN i_reg_vbak
WHERE
vbap~vbeln EQ i_reg_vbak-vbeln AND
vbap~matnr IN s_matnr AND
vbap~werks IN s_werks .
However, when I execute the program, I get the dump saying as:
I get this exception "DBIF_RSQL_INVALID_RSQL", assigned to CLASS "CX_SY_OPEN_SQL_DB"
Please help me in understanding this.
Also, there are only 85 entries in i_reg_vbak, plus not many values are there for s_matnr and s_werks.
I tried executing this query w/o for all entries, but still it gave a dump.
Waiting for your reply, thanks!hello
SELECT
vbap~vbeln
vbap~posnr
vbap~matnr
vbap~arktx
vbap~pstyv
vbap~abgru
vbap~prodh
vbap~netwr
vbap~werks
vbap~kwmeng
vbap~prctr
vbap~ps_psp_pnr
from vbap into corresponding fields of table it_vbap.
if u use any fields of vbap on selection scrren then mention as
eg: where vbeln in s_vbeln etc.
with regards,
sumanth reddy -
Getting Dump from a select query
Dear All,
Am selecting records from KEKO and storing into E1KEKO internal table. But am getting dump error. I need to send those E1KEKO records as idoc. Kindly help me out how to fix this dump.
SELECT * INTO CORRESPONDING FIELDS OF e1keko
FROM keko
WHERE keko~matnr = p_matnr
AND keko~werks = p_werks
AND keko~bwtar = 'Z06'
AND keko~bwvar = 'Z06'.
CLEAR t_idoc_data.
t_idoc_data-segnam = c_segnam_e1keko.
t_idoc_data-mandt = sy-mandt.
t_idoc_data-sdata = e1keko.
APPEND t_idoc_data.
CLEAR e1keph.
endselect
Thanks in advance.
AnandhanHi,
If i use the below select query in a test program, that time also am getting the same dump.
DATA: e1keph TYPE e1keph,
e1keko TYPE e1keko.
SELECT * INTO CORRESPONDING FIELDS OF e1keko
FROM keko
WHERE keko~matnr = '000000000010801071'.
endselect.
(code}
The dump showing the below message
The reason for the exception is:
In a SELECT access, the read file could not be placed in the target
field provided.
Either the conversion is not supported for the type of the target field
the target field is too small to include the value, or the data does no
have the format required for the target field.
Thanks in advance
Anandhan -
Short Dump for Dynamic Select Query
Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
<t> TYPE table.
DATA: it_fldcat TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details TYPE abap_compdescr_tab,
wa_details TYPE abap_compdescr.
DATA: ref_descr TYPE REF TO cl_abap_structdescr.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
SELECT * INTO TABLE <t>
FROM (p_table)
WHERE (tab_cond)
ORDER BY (tab_ord).
ENDFORM. " GET_CCNUM_2Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
* CLEAR wa_it_fldcat.
* wa_it_fldcat-fieldname = wa_details-name .
* wa_it_fldcat-datatype = wa_details-type_kind.
* wa_it_fldcat-intlen = wa_details-length.
* wa_it_fldcat-decimals = wa_details-decimals.
* APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
* EXPORTING
* it_fieldcatalog = it_fldcat
* IMPORTING
* ep_table = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table). " New code by naren
Please Try this..
Thanks
Naren -
I am getting dump error while running one report in one select query
Hi,
While running a report program, I am getting a dump error in one select query. So could you please correct the select query so that I can't face the dump error.
SELECT vbeln parvw kunnr INTO CORRESPONDING FIELDS OF TABLE l_t_vbpa
FROM vbpa
FOR ALL ENTRIES IN l_t_backorder_item
WHERE vbeln = l_t_backorder_item-vbeln AND
( ( parvw = c_we AND kunnr IN rng_shipto ) OR ( parvw = c_ag AND
kunnr IN rng_soldto ) ) .
<removed by moderator>
Best Regards,
BDP
Edited by: Thomas Zloch on Apr 30, 2010 12:31 PMHi Bansidhar,
It would be helpful if you could tell what type of dump it is.
If it is a timeout you should check whether l_t_backorder_item is empty - in this case ALL document numbers are selected. f you get the timeout with a populated table consider converting the l_t_backorder_item table into one ore more ranges tables - the select with ranges tables is way quicker than 'for all entries'. But take care the ranges table has not to many entries - the SAP SQL converter puts this into one huge SQL statement and this might become too big to be handled by the database (depends on the actual underlying database).
I would also consider splitting the SELECT into two (2nd one with 'appending into table') to make the code easier to understand It also helps the database system determining a strategy for the select.
Regards,
Gerd Rother -
Select query written on view giving dump
Hi All,
I have written the following query on COAS view in my code:
SELECT aufnr bukrs INTO TABLE gt_aufnr
FROM coas
WHERE
aufnr IN r_aufrm AND
auart IN s_auart AND
autyp = c_autyp_01 AND
kokrs = c_kokrs_mbca.
When records in range r_aufrm are too many like 6000 or so it gives me a run time error on this query - DBIF_RSQL_INVALID_RSQL. Error description says size of select query is large.
Question : Is this bug coming because I am using the view. If i select the records on table AUFK (only table on which the view is created), will it rectify the problem?? I am asking this because it's in production and I cant make any change and test then and there.
Note: the range r_aufrm contains two types of records for AUFNR - 1. with sign GE and others with sign LE. So I cannot use for all entries. If I still can, please tell me how?
Thanks a looot!
Waiting for the response,
NavitaThanks All!!
I think, this range limit has caused the problem. Range limit is 999 records.
Just one question I have. At runtime when I check the number of entries in r_aufrm in the query, I get 6000 entries. So, does it allow 6000 records to enter the range variable even if it has a limit of 999. Is it the case that, in select query only it will throw a dump if records in range exceed 999??
SELECT aufnr bukrs INTO TABLE gt_aufnr
FROM coas
WHERE
aufnr IN r_aufrm AND
auart IN s_auart AND
autyp = c_autyp_01 AND
kokrs = c_kokrs_mbca.
Please clear my doubt.
Thanks a lot for ur help!!!!
Navita -
Hi Experts ,
The following select query creates a dump called time out error, May be this is taking long time to execute . Please tell me how to fine tune this select query?
select v1vbeln v2matnr
v2werks v1fkdat
v1knumv v1fkart
v1sfakn v2posnr
v2vgbel v2ntgew
v2gewei v1land1
v2autyp v1vbtyp
v1~vkorg
v1~vtweg
v1~spart
into table i_billing
from vbrk as v1 inner join
vbrp as v2 on
v1vbeln = v2vbeln
where v1~vbeln in so_vbeln
and v1~vkorg in so_vkorg
and v1~vtweg in so_vtweg
and v1~spart eq p_spart
and v1~fkart in so_fkart
and v1~fkdat in so_fkdat
and v1~vbeln in so_vbeln
and ( v1~vbtyp eq '5'
or v1~vbtyp eq '6'
or v1~vbtyp eq 'M'
or v1~vbtyp eq 'S'
or v1~vbtyp eq 'N'
or v1~vbtyp eq 'O' )
and ( v2~vgtyp eq 'J'
or v2~vgtyp eq 'T' )
If is a kit o a dis only get positions
and ( ( v2~zzkit eq '' and
v2~zzdis eq '' )
or ( ( v2~zzkit ne '' or
v2~zzdis ne '' ) and
( v2~uepos <> '000000' ) ) ).
Thanks in advance .hi,
post it on ABAP forum and not on PI forum
Regards,
Michal Krawczyk -
Hi all,
tables: ikpf,iseg.
TYPES: BEGIN OF i_ikpf,
werks TYPE ikpf-werks, "Plant
lgort TYPE ikpf-lgort, "Storage location
iblnr TYPE ikpf-iblnr, "Physical Inventory Document
gjahr TYPE ikpf-gjahr, "Fiscal Year
zldat TYPE ikpf-zldat, "Last Count Date
sobkz TYPE ikpf-sobkz,
bldat TYPE ikpf-bldat,
gidat TYPE ikpf-gidat,
budat TYPE ikpf-budat,
END OF i_ikpf.
DATA: it_ikpf TYPE STANDARD TABLE OF i_ikpf ,
wa_ikpf TYPE i_ikpf .
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR iseg-matnr,
s_werks FOR ikpf-werks,
s_lgort FOR ikpf-lgort,
s_iblnr FOR ikpf-iblnr,
s_gjahr FOR ikpf-gjahr,
s_zldat FOR ikpf-zldat,
s_abcin FOR iseg-abcin.
SELECTION-SCREEN: END OF BLOCK b1 .
SELECT iblnr gjahr werks lgort sobkz bldat gidat zldat budat
from ikpf
INTO TABLE it_ikpf
WHERE werks IN s_werks and
lgort IN s_lgort and
iblnr IN s_iblnr and
gjahr IN s_gjahr and
zldat IN s_zldat.
select query is giving dump as " data could not be placed in an output area"
thanks in advance,When selecting the fields, order of fields selection and fields in internal table should be same.
Check the below code
tables: ikpf,iseg.
TYPES: BEGIN OF i_ikpf,
iblnr TYPE ikpf-iblnr, "Physical Inventory Document
gjahr TYPE ikpf-gjahr, "Fiscal Year
werks TYPE ikpf-werks, "Plant
lgort TYPE ikpf-lgort, "Storage location
sobkz TYPE ikpf-sobkz,
bldat TYPE ikpf-bldat,
gidat TYPE ikpf-gidat,
zldat TYPE ikpf-zldat, "Last Count Date
budat TYPE ikpf-budat,
END OF i_ikpf.
DATA: it_ikpf TYPE STANDARD TABLE OF i_ikpf ,
wa_ikpf TYPE i_ikpf .
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR iseg-matnr,
s_werks FOR ikpf-werks,
s_lgort FOR ikpf-lgort,
s_iblnr FOR ikpf-iblnr,
s_gjahr FOR ikpf-gjahr,
s_zldat FOR ikpf-zldat,
s_abcin FOR iseg-abcin.
SELECTION-SCREEN: END OF BLOCK b1 .
SELECT iblnr
gjahr
werks
lgort
sobkz
bldat
gidat
zldat
budat
from ikpf
INTO TABLE it_ikpf
WHERE werks IN s_werks and
lgort IN s_lgort and
iblnr IN s_iblnr and
gjahr IN s_gjahr and
zldat IN s_zldat.
Other wise use "INTO CORRESPONDING FIELDS" while selecting.
Hope this helps u. -
Hi,
We have a select query written as below:
SELECT counter
stokz
pernr
workdate
rnplnr
catshours
FROM catsps
INTO TABLE t_catsps
WHERE pernr IN r_pernr
AND workdate IN s_wrkdt
AND rnplnr IN s_ntwrk
AND belnr IN s_docno
AND transfer NE 'X'.
Here, the range which we are using has a record of more than 16000. At this particular portion of the code the program dumps. I suspect it is due to the excessive data records in the ranges option. Is there any remedy for this situation. Please help!Hi,
check the inetrnal table strcure field are of same type of catsps table field which you are fetching
Or try to USe into corresponding fields of table t_catsps.
"check the inetrnal table strcure field are of same
"type of catsps table field which you are fetching
SELECT counter
stokz
pernr
workdate
rnplnr
catshours
FROM catsps
INTO TABLE t_catsps 'Or try to USe into corresponding fields of table t_catsps
WHERE pernr IN r_pernr
AND workdate IN s_wrkdt
AND rnplnr IN s_ntwrk "check rnplnr and s_ntwrk are of same type
AND belnr IN s_docno "Check belnr and s_docno are of same type
AND transfer NE 'X'.
"hadle sy-subrc
prabhudas
Edited by: Rob Burbank on Sep 22, 2010 9:32 AM -
Select query giving Time out dump
Hi All,
I have written a select query on a table in BW system.The code for the same is attached below.The table contains some 6,00,000 records.This query is giving a time out error.Kindly look into the query and advice ways to make it work.Thanks.
IF NOT lt_temp[] IS INITIAL.
SELECT /bic/zprrmatnr objvers /bic/zprclwynr /bic/zprrmdlr
FROM /bic/pzprrmatnr
INTO CORRESPONDING FIELDS OF TABLE lt_zprrmatnr
FOR ALL ENTRIES IN lt_temp
WHERE /bic/zprclwynr = lt_temp-temp
AND objvers = 'A'.
ENDIF.
Thanks and Regards,
FaisalNot only is it BW, it is also a customer table. Have a look here on how to research yourself:
Please Read before Posting in the Performance and Tuning Forum
Thomas -
Select query is working on oracle 10.1.0 but its not working in 10.2.0
select query is working and retrieving some data from oracle database server 10.1.0.2.0, but same query is not working in 10.2.0.1.0 database server, its throws(ORA-00942: table or view does not exist)
But schema related tables and relevant details are same in 10.2.0.1.0 database server, so don't think that table is missing on that schema.
Note: Query length is upto 480 line
I have validate all the things, everything is fine, i don't why that query is not executing in different version.
I am in helpless in this situation?, anybody faced this issue?
Thanks in advanceValidated means all the tables and and columns are verified, i just running in sqlprompt,
Say for example:
sql> select * from table1;
One thing i observed while executing the query its showed error in one location of select sql. i mean particular word in select sql.
After that i combined some three lines of huge select sql into single then i am getting error in different location i mean different word...
My question is how same query executing in Oracle 10g Release 1, same dump (its exported from Release1) imported into oracle 10g release 2 is not executing. its shows Table or view doesn't exit. -
Timeout Short Dump on a Data Query to a blank table.
Hi,
My program gives a short dump on quering a blank table. The dump says timeout.
what could the possible problem be.
regards,Runtime Error TIME_OUT
Occurred on 02/19/2009 at 10:35:35
Time limit exceeded.
What happened?
The program "SAPLE31C" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
After a certain length of time, the program is terminated. In the case
of a work area, this means that
- endless loops (DO, WHILE, ...),
- database accesses producing an excessively large result set,
- database accesses without a suitable index (full table scan)
do not block the processing for too long.
The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The
current setting is 5400 seconds. Once this time limit has been exceeded,
the system tries to terminate any SQL statements that are currently
being executed and tells the ABAP processor to terminate the current
program. Then it waits for a maximum of 60 seconds. If the program is
still active, the work process is restarted.
successfully processed, the system gives it another 5400 seconds.
Hence the maximum runtime of a program is at least twice the value of
the system profile parameter "rdisp/max_wprun_time".
How to correct the error
You should usually execute long-running programs as batch jobs.
If this is not possible, increase the system profile parameter
"rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
(for example);
- Database has an unsuitable index: Check index generation.
You may able to find an interim solution to the problem
~~~~~~~
The line to which it points is a select query on a table that has not records. -
Performance issue with select query and for all entries.
hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database. -
Error While Firing select Query on Table
Hi aill,
we have Oracle 11g RG2 RAC on Production Machine. When I am firing select query on one partiton table,it will show me below error in Alter Log file :
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x0] [PC:0x84056AA, kkpamDInfo()+38] [flags: 0x0, count: 1]
Errors in file /opt/app/oracle/diag/rdbms/winsdb/WINSDB2/trace/WINSDB2_ora_29686.trc (incident=288563):
ORA-07445: exception encountered: core dump [kkpamDInfo()+38] [SIGSEGV] [ADDR:0x0] [PC:0x84056AA] [Address not mapped to object] []
Incident details in: /opt/app/oracle/diag/rdbms/winsdb/WINSDB2/incident/incdir_288563/WINSDB2_ora_29686_i288563.trc
While checking the trace file :
========== FRAME [2] (ksedst1()+98 -> skdstdst()) ==========
defined by frame pointers 0x2ba371efaa40 and 0x2ba371efa990
CALL TYPE: call ERROR SIGNALED: no COMPONENT: KSE
RDI 0000000000000000 RSI 0000000000000000 RDX 00002BA371EF6118
RCX 0000000000000001 R8 0000000000000000 R9 0000000000000000
RAX 0000000000000000 RBX 0000000000000003 RBP 00002BA371EFAA40
R10 71EFA9A000000000 R11 0000000000000000 R12 0000000000000003
R13 0000000000000003 R14 0000000000000001 R15 0000000000000001
RSP 00002BA371EFA9A0 RIP 000000000349E72E
Dump of memory from 0x2ba371efaa40 to 0x2ba371efaaf0
2BA371EFAA40 71EFAB10 00002BA3 0349E77F 00000000 [...q.+....I.....]
2BA371EFAA50 00000000 00000000 00000000 00000000 [................]
2BA371EFAA60 71B996F0 00002BA3 02050034 00000000 [...q.+..4.......]
2BA371EFAA70 000000FF 00002BA3 00002004 00000000 [.....+... ......]
2BA371EFAA80 00000000 00000000 2338D058 00016DAB [........X.8#.m..]
2BA371EFAA90 00000003 00000000 085232F3 00000000 [.........2R.....]
2BA371EFAAA0 0000000D 00000000 00000002 00000000 [................]
2BA371EFAAB0 00000000 00000000 00000000 00000000 [................]
2BA371EFAAC0 71EFAAD0 00002BA3 085BBFCF 00000000 [...q.+....[.....]
2BA371EFAAD0 71EFAB10 00002BA3 0349E249 00000000 [...q.+..I.I.....]
2BA371EFAAE0 00000000 00002BA3 00000013 00000000 [.....+..........]
Can Anyone guide me for above Errors. How can I resolve the same.A quick search of Oracle Support shows that there are a handful of bugs that match ORA-07445 with an argument of kkpamDInfo()+38.
Whether yours is already identified and patched depends on the exact version of 11.2 and the specific circumstances.
If you're on 11.2.0.1 then this might be part of what sounds like quite a big bucket of such errors - Bug 9399991 relating to errors and dumps with SQL against partitioned tables.
Maybe you are looking for
-
Add debit memo request to Sap credit exposure formula
Hi, can any body plz suggest me how to add debit memo request(DR) to sap credit exposure formula. thanks Ramu
-
Can't remove MobileMe/iCloud account from Mac Mail
I don't use my MobileMe email address for email, so I have it forwarded to my Gmail address that I do check. Previously, any alerts that went to that account (reminders that I set in iCal, which I sync to my Google Calendar, and alerts when I use Fin
-
Need help in correlated sub query logic
Hi , I have one procedure with cursor. I have given small part of the cursor as shown below . SELECT A.DAY_DATE, A.COUNTRY_CODE, A.INST_CODE, a.bra_code, a.cus_num, a.cur_code, a.led_code, a.sub_acct_code, (tra_amt * SPOT_RATE) pre_
-
Hey, I have a new Macbook Air and I am trying to transfer a file onto my camera. I can connect my camera through USB connexion but can't see it on the Finder ... Is there anyway I can transfer something on my camera ? Thank you
-
How to collapse other expanded item
Hi, I have 5 department on a tree view datawindow and each department consists of employee name. When I try to expand department 5 how to make other departments as collapsed if they have been already isexpanded before. The users want to view the