Dump in BI 7 While Compression of 0IC_C03
Hi All,
I am getting dump "CX_RSR_X_MESSAGE", "CX_SDB_ORA_PROGRAM_ERROR" while compression of cube 0IC_C03, earlier we were on SP 9 at that time ,compression was working fine, we applied sp10, 11 after that I am getting dump, even rollup of aggregates is also not happening.
Can you please help me out.
Regards
Amit kapoor
Hi Amit,
Have you tried to implement the compression and aggregation on some other cube. Try that option first and if still u are getting the same issue then raise an OSS note to SAP.
Hope it helps.
Assign points if useful.
Regards
Vishwanath
Similar Messages
-
Error ORA-01422 while compressing a cube
Hello,
I am trying to compress the initial balnce of the European Inventory KPI (KPINVMOEU) cube after reloading it and I encountered the oracle error-01422 which says:
system error:error-01422:exact fetch returns more than requested
system error:CONDENSE_FACTTABLE-5-ERROR-01422
Has anyone dealt with this error before? Any input is appreciated.
Thanks in advance,
madhuMadhu,
can you please look into these notes: 485766 and 385660.
at the same time look into these links which is for similar problem.
ERROR: System error: CONDENSE_FACTTABLE-5- ERROR:12805
Error during compress 0IC_C03
error ORA-01422 while compressing a cube
Re: Cube compression failing
All the best.
Regards,
Nagesh Ganisetti. -
Problem while compressing a PDF
Hi,
I am facing a problem while compressing a PDF. The requirement is to merge lot of PDF into one. But when we merge the file the size of the PDF becomes huge. It can not be sent as an attachment in an email. We also don't want to ZIP the file. Any help is welcome.
Thanks,Thanks a lot Satyajit,
I have already gone through the post. I can not change the existing forms. I can compress one form to the least I can but when I merge 500 of such forms then the size becomes huge. I need to compress the "merged" big file, not the single form. My individual forms are already very small in size.
Regards -
Error while compression of infocube
Hello,
I am facing following error while compression of inventory cube
ORA-04098: trigger 'SAPPW1./BI0/0500014656' is invalid and failed re-validation
Request have been loaded in the ranges of posting date and those request are not getting compressed.Can you help?Please check the following SAP note . It might help you..
Note 385660 - Condenser: DBMAN 100; ORA-4098
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=385660 -
I try to load data in a infocube while compression are running
SDN Experts
i try to laod data while compression are running. it is a full load, but i stoped my data load job right away in 20 minutes from sm37 when i see that it could cause problem. i like to know what can i possible able do know? and what are the conciquenses?i changed the request status to red in the infocube. if i try to delete the request i think it will effect the compression job that is running right know. should i wait to see if the compression job is successful before i delete the request from the infocube?
there are five compression job that are scheduled to compress it compressed all the four request successfully and compressing the last i right know?
i am really scared about this do you think every thing will be alright even if the compression job failed? what are the negative effects of the action i did? should i run the report of the compression job is complete to check the performance or the data is ok?
please help. thank you. -
Using mac to do other tasks while compressing?
Are there any issues with surfing the web and watching either Flash or Quicktime streaming videos while compressing video in FCP onto another drive or using Compressor to compress video on another drive? What about while capturing?
Thanks.The worst that can happen is that things will slow down a bit; I frequently use VueScan and my Nikon 5000 to batch scan slides, and/or work in Photoshop while Compressor is running.
I've never had any issues with the resulting compressed file, or a crash or freeze while doing this. Like Jerry, I have 8 GB of RAM in my MacPro. This is where lots of extra memory really helps. -
Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data
Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
DonHi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don -
Dump in prodcution server while downloading ALV report to excel sheet
HI ALL,
ALV report is working fine in bother DEV and PROD servers....but in production while downloading report to excel sheet it is going to dump.
"dump is below:
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed. "
But in development this problem is not there, iam able to download ALV report to EXCEL sheet.
Any help experts......
Thanks in advance
RamHi,
I had the same problem,
Run a consistency check for your ALV and you will find out. See if you havent passed any unnecessary parameter to FM.
/people/rainer.hbenthal/blog/2009/09/25/sos--my-alv-report-is-not-working
Dump while printing ALV (field symbol not assigned)
Sumit -
Time_out dump error in RSTXSCRP while Importing SAP Script
Hi Experts,
I am using RSTXSCRP program for Download and Upload the SAP Form. I am downloading script 'ZF110_HDFC_CHCK' is successfully.
after that before uploading i open the notepad i replace 'ZF110_HDFC_CHCK' to 'ZF110_HDFC_DM'.
then in selection-screen i mension the object name is ZF110_HDFC_DM.
and Mode IMPORT
while execute the report it taking so much time and they given Dump error.
How can i solve this?
Short text
Time limit exceeded.
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
Line SourceCde
1288 rc = 4. exit.
1289 endif.
1290 endif.
1291 endif.
1292 endform.
1293
1294 * IMPORT a style or layout set
1295 * OBJECT_TYPE is FORM/FORT or STYL/STYT
1296 form import_formstyl using value(object_type) value(la
1297 data: rc like sy-subrc,
1298 olang like thead-tdospras,
1299 transtat like thead-tdtranstat.
1300
1301 perform get_language_vector using language_vector.
1302 if sy-subrc <> 0. "exit if language vector cannot be r
1303 nothing = true. subrc = 4. exit.
1304 endif.
1305 * invalidate HEADER,LINES
1306 clear header. refresh lines.
1307 clear olang.
1308 transtat = translation_wanted. "default
1309 perform import_record.
1310 while end_of_objdata = false and subrc = 0.
1311 case record-command.
1312 * header data
1313 when 'HEAD'.
1314 refresh lines.
1315 header = record-data.
1316 if header-tdname(16) ne header-tdform.
1317 if cl_abap_char_utilities=>charsize > 1.
>>>>> while header-tdform ne header-tdname(16).
1319 shift header+85 right.
Regards,
Dhina..HI,
Did tried coping the script in se71 by the following path
se71> Utilities>copy from client then
Form Name ZF110_HDFC_CHCK
Source Client 000 " Specify client
Target Form 'ZF110_HDFC_DM
Regards,
Madhukar Shetty -
Dump Error in KB11N while posting
Dear Friends,
While posting the entries from KB11N Transaction Code, System is throwing Dump Error.
Please tell the solution for the Issue.
Screen Shot: 1
Screen Shot: 2
Please do the needful.
Thanks & Best Regards,
Dinu BeamHi, Dinu,
Please see this thread:
Enter statistical key figures ( KB31N ) error MESSAGE_TYPE_X
It's about another transaction, but the include that raise this message is the same.
Hope this help. -
Dump: Parameter error raised while editing Master catalog
Hi all,
I need some help.
While I am trying to edit the master catalog I am getting a dump error: Exception condition "PARAMETERS_ERROR" raised. The moment when I clicked on the edit button I am getting this dump.
I could see the field "operation" is showing as Undefined in the table /CCM/D_CTLG.
Could you please help me?
Dump details:
Error analysis
A RAISE statement in the program "SAPLSYGU" raised the exception
condition "PARAMETERS_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Errors in passing parameters
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLSYGU" or "LSYGUU03"
"GUID_CONVERT"
or
"SAPLSYGU" "PARAMETERS_ERROR"
or
"SAPMHTTP " "PARAMETERS_ERROR".
Information on where terminated
The termination occurred in the ABAP program "SAPLSYGU" in "GUID_CONVERT".
The main program was "SAPMHTTP ".
The termination occurred in line 119 of the source code of the (Include)
program "LSYGUU03"
of the source code of program "LSYGUU03" (when calling the editor 1190).
Line SourceCde
89 map22to16a 12 09 gc_map__345678.
90 map22to16a 13 10 gc_map345678__.
91 map22to16b 14 10 11 gc_map5678__34.
92 map22to16b 15 11 12 gc_map78__3456.
93 map22to16a 16 12 gc_map__345678.
94 map22to16a 17 13 gc_map345678__.
95 map22to16b 18 13 14 gc_map5678__34.
96 map22to16b 19 14 15 gc_map78__3456.
97 map22to16a 20 15 gc_map__345678.
98 map22to16a 21 16 gc_map345678__.
99 map22to16a 22 16 gc_map5678__34.
100 lv_g16x = lv_g16.
101 ev_guid_x16 = lv_g16x-x.
102 ev_guid_c32 = ev_guid_x16.
103
104
105 * conversion x16 or c32 to c22 if requested
106 *** iv_uuid_x16 (wins) or iv_uuid_c32 have to be filled with valid guid!
107 ELSE. "Y9CKxxxxxx
108 * elseif ev_guid_c22 is requested. "Y9CKxxxxxx
109 IF NOT iv_guid_x16 IS INITIAL.
110 lv_g16x-x = iv_guid_x16.
111 ev_guid_x16 = iv_guid_x16. "Y9CKxxxxxx
112 ev_guid_c32 = iv_guid_x16. "Y9CKxxxxxx
113 ELSEIF NOT iv_guid_c32 IS INITIAL.
114 lv_g16x-x = iv_guid_c32.
115 ev_guid_x16 = iv_guid_c32. "Y9CKxxxxxx
116 ev_guid_c32 = iv_guid_c32. "Y9CKxxxxxx
117 ELSE.
118 * no parameter at all provided ... "Y9CKxxxxxx
>>>>> RAISE parameters_error.
120 ENDIF.
121
122 IF ev_guid_c22 IS REQUESTED. "Y9CKxxxxxx
123 lv_g16 = lv_g16x.
124 ASSIGN lv_xofs TO <lv_xofs> TYPE 'b'.
125 map16to22a 01 01 fc gc_base345678__.
126 map16to22b 02 01 03 02 f0 gc_base5678__34.
127 map16to22b 03 02 0f 03 c0 gc_base78__3456.
128 map16to22a 04 03 3f gc_base__345678.
129 map16to22a 05 04 fc gc_base345678__.
130 map16to22b 06 04 03 05 f0 gc_base5678__34.
131 map16to22b 07 05 0f 06 c0 gc_base78__3456.
132 map16to22a 08 06 3f gc_base__345678.
133 map16to22a 09 07 fc gc_base345678__.
134 map16to22b 10 07 03 08 f0 gc_base5678__34.
135 map16to22b 11 08 0f 09 c0 gc_base78__3456.
136 map16to22a 12 09 3f gc_base__345678.
137 map16to22a 13 10 fc gc_base345678__.
138 map16to22b 14 10 03 11 f0 gc_base5678__34.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 1
SY-TABIX 1
SY-DBCNT 0
SY-FDPOS 2
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE HTTP Control
SY-MSGTY E
SY-MSGID /CCM/COMMON_DB_EX
SY-MSGNO 010
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4Deal all,
Any help would be appreciated.
It seems like master catalog got locked. When I tried to map few supplier catalog to master catalog, I could see the message "Master catalog is locked" in SLG1.
I noticed two things which could be a reason:
1. There are two entries for the master catalog in the
table: /CCM/D_CTLG_REQ. Two versions are there 109 and 110. For the
version 109, field REQ_SENDER is showing the value FILE UPLOAD. Seems
like the master catalog is locked.
2. In the table /CCM/D_CTLG, for the version 109 the value for the
field Operation is showing as blank (undefined)
In SLG1 - when we tried to upload data in other supplier catalogs, we
are getting the message "Master catalog is locked".
I ran the report /CCM/CLEANUP_CATALOG to unlock the master catalog. But
it is not unlocking the catalog.
Also I ran the report: /CCM/CLEANUP_UPDATE_STATUS which changed the
status of the catalog from 03 to 05 in the table: /CCM/D_UPD_STATE
Please advise.
Thanks. -
Losing Resolution While Compressing...
I have an HDV 1080i 30F sequence that I exported out of FCP as a QuickTime file. I am trying to compress it down pretty small (probably needs to be less than 100MB) for the web. I tried making it into an iPod video and that made it look HORRIBLE.
Why did that happen? I figured scaling it down it would keep the image sharp? What should I do to compress this video down small enough for the web?svalkar13 wrote:
Image size reads as 68.7m and dimensions read as 4000 px x 6000 px on all
three (RAW, PS edit and LR edit). So does that mean I don't have a problem?
Correct, you don't have a problem.
Any idea why the size (in inches) come up so differently between the PS
file and the LR file? In my limited experience I'd been told that the
measurements listed within "image size" indicated the maximum size you
could print while maintaining quality.
Because again, it's a difference in the resolution tag. The tag uses the total number of pixels to provide a 'size'. Digital images don't have a size other than the space they take up on a drive.
Exampe: you have 1000 pixels. If the tag was set for 100, the 'size' would be 10 inches. You take 100 pixels of your total 1000 pixels and divide that up, you get of course, 10". If the tag were instead 1000, you'd have a 'size' of one inch. Same data. Same number of pixels. IF you want LR and Photoshop to be in sync, just ensure that the value for 'resolution' is the same. But again, it's rather meaningless until you decide how to output those pixels to a print size. Do you want 1 inch or 10 inches from your 1000 pixels?
see: http://www.digitaldog.net/files/Resolution.pdf -
Dump error at the while form 16 is generated
Hi Guru's,
I am getting dump error when i am excuting form 16 through pc00_m40_f16 as.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "FILL_INT_S88" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the running program "HINCF160", the field "ALPHA" of the type
"C" and length 26 was to be accessed with the offset 26.
However, subfield accesses with an offset specification that is not
smaller than the field length are not permitted.
may i know what may be the problem .Please help me.
Thnaks & RegardsHello friends and gurus
Any answer for my issue.
B4SAPHCM -
Dimensions for HD while compressing?
I edited a 10 min sequence in Apple Pro Res 422, 1920 x 1080. I exported it at 1280 x 720 to make a smaller file. It's still 6.23GB, too big to send via YouSendit. I still will have to convert it to PAL. So I need help on how to compress this big file in HD dimensions (16.9) and maintain broadcast quality.
Thank you.The determining factor for the appropriate pixel dimension of your images is determined (in FCP7) by the frame size of the Sequence you are editing in, not the final exported dimension.
If you are editing on a standard HD 1920 x 1080 timeline, then you would want an image no smaller than 1920 pixels wide, 1080 pixels high. In FCP 7, you can use any image larger than that baseline pixel size up 4000 pixels wide by 2250 pixels high in the 16:9 aspect ratio, or in fact, any aspect image where the longest dimension does not exceed 4000 pixels.
You can also use smaller images, but if you zoom them up to fill frame, your image quality will degrade.
If you plan to zoom or reframe the images, you would want to work with the largest image size you can to be able to zoom into the image without quality loss.
Other image specs for compatibility with FCP7: Color Mode - RGB, 8 bits/channel.
FCP7 supports .jpeg, .tif, .png among other formats.
MtD -
Dump: ASSERT condition failed - While creating followup to Package quote
Hi,
I am trying to create follow up (Service contract) document to Package Quotation. But, I am endedup with dump in Function Module saying : "ASSERT Condition Failed". And this is happening only in preproduction. In development system, it is working fine. I really do not understand the reason.
last week it worked fine ... but suddenly this error came up.
Please help me out to find the reason and solution.
Thanks,
SandeepHi Arun,
Please check the following in regards to the company code issue:
1. Go to transaction PPOME and search for your Top Org unit,
2. For that org unit, go to the tab Account Assignment.
3. Fill the field Company Code with appropriate value and save it
This should resolve the issue in regards to the message of the company code. The dump refers to the table V_T077D. Please check your number range settings for the customer account groups related to students table V_T077D. Once the necessary customizing is maintained, the problem should get solved.
Good luck.
Rob
Maybe you are looking for
-
Update GCC on mac os x 10.7.4
Dear, I need a newer version of gcc to compile libgimli (http://sourceforge.net/projects/libgimli/) under mac os x 10.7.4. I already tried macports, homebrew and compiling from hand, but I keep getting errors. Below is the error if I use Homebrew. Ho
-
Windows 8 has problems with webcams?
Whenever I launch Flash in any browser I can not get webcam to work! It won't work in conjunction with the mic is the problem I think. The webcam and mic work fine on their own. However Flash either crashes or refuses to show webcam depending on brow
-
IDOC: Status (Error/Success/information)report to Sender system
How would one send a message(error/success/information) to the sending(external) system to inform them of the statuses of the messages they've sent to our SAP system?
-
How to open, automatically, several selected tabs
Hello, When I launch Firefox I would like it to open several selected tabs that I review regularly. Easy to do but only for the Home page... Did I miss something ? Thanks in advance. OldChap2
-
hi all, One of the user told us that they are facing problem while developing membership online fee payment, when theay are trying to access member table in oracle server. It works fine for single or fewer records,but when we try to fetch all records