Dump in report painter

Hi ,
I am getting dump while calling report painter transaction (z *), the dump is from submit program statement.The automatic generated program does not exist in the system, can any body help me why it is not generating?
Regards,
siva kumar

hi..
Goto GRR3 > click on Lib 1VK it will show you all the report in 1VK library > select your report & double click on it
It will display the report format. Then go to Edit at the top. you will find General data selection.click on it you will find available characteristics. Then goto GRR2 for making any change/selection for Fiscal year char
If your report is a standard one you can not change. then copy the report from GRR1 and make the changes.
You can also see the char in GR23 by selecting 1VK lib.
kkumar
Edited by: kkbdsp on Mar 11, 2011 9:21 AM

Similar Messages

Report Painter GR214 generation error - Short dump 4.6C

While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to "MESSAGE_TYPE_X"
"%_T01JR0 " or "########################################"
"INSERT_ROW_FORMULA_NEW"
Any leads to fix this?
The generation error happens only when I include a last line formula in the last section, Till then it is working fine.

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Report painter dump while execution

Hi,
I am executiing report developed using report writer.
It is giving error when specific criteria given as input for rest of the criteria is is working fine.
What i analysised while debugging is it fills some matrix, matrix has fields like prev node next node index xsingleval
when it founds entry with xsingleval is not initial it giving error.
Not sure if any has faced this issue before.
Regards,
Amit R.

Hi,
Goto GR55 and try to regenerate the report painter group and then check it...
The master table for report painter group is T803J.
You can find the status field in the table as STATUS.
Hope it will solve the dump...
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards
Shiva
Edited by: Alvaro Tejada Galindo on Jan 8, 2009 10:35 AM

Execute report painter report in background

Hi All,
I have created new library, report group and a new report in report painter, the report is working fine if we execute in foreground, but if we execute in background then the values are blank.
Please help me how to get the values if we execute the report in background.
Regards,
Raj

Hi,
I have created a new report for balance sheet which displays for whole year by a break up of periods from 1 to 16,
because if extracting the data for whole year i am getting ABAP short dump as runtime exceeded.
Now i want to run the report in background, but when i run the report in background the values are not appearing in the report.
I am using T.code GRR3.
Regards,
Raj

General data selection in report painter

hi,
i have created one report painter but now i need to add one more selection field using general data selection,
i tried doing this but i am getting short dump.
kindly help me out.

hi poonam,
u can add the field by selecting one of the radio buttons. i.e.,
keyfigure with characteristics.
predefined key figure
formula
Then u select the field which u want to add and provide options as per ur requirement right..
i dont know why r u getting dump...
i have just tried and it is working fine for me..
Rgds.,
subash

EXTREMELY URGENT: % Cost (out of Total Costs) Column in Report Painter

Hi Gurus,
I'm not new to Report Painter, but, am stuck at one thing.
In report, Col 1 shows Costs by Administration (row 1), Labor (row 2), Others (row 3) and total (row 4 being formula as total of row 1, 2 & 3).
Client wants col 2 to show % Cost of each row out of total Expenses (so totals row in this col. will have 100%)
How to do it technically.
Please help. It's EXTREMELY URGENT.
I'll award points ASAP
Regards,
SB

Its abit difficult to illustrate without having a screen dump, what you can do is make use of something called special cell definition. Now if you double click on the cell for column 1 of row 4 for total costs then the system identifies it as a cell Z001 which in fact will recognise a constant value of total costs , thereby you can define in Column 2 as a formula element with (X001/Z001)*100 thereby giving a value in %. Try it and see if it helps

Report Painter in Background??

How do you pass parameters or a variant to this FM (crif_rw_web_call_report)?
I want to run a nightly job that executes a custom report painter report (with a selected variant or parameters) and dumps that data to a file.
Edited by: Daniel Simpson on Nov 24, 2008 7:39 PM

I realized that I can run report painter in background & export to file on the app server by going to the report selection screen and selecting the "output parameters" button & configuring the report from there.
I would however, still like to learn how to execute the FM ( CRIF_RW_WEB_CALL_REPORT ) to bring the report painter data into internal tables.

Logical Formulae in Report Painter

Hi,
How do we insert a logical formula in a report painter.
For instance, "IF-THEN-ELSE".
Your early replies would be appreciated..

You would create a formula column in reports or formula variables to use in columns.
More details on link's below:
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22c6243c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ea043c611d182b30000e829fbfe/frameset.htm
Best Regards,
Daniel Scoz.

Error in generating a report group in Report Painter

Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
Louie

There's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
    The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
     in "FILL_RANGES_FROM_SET".
    The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
    The termination occurred in line 92457 of the source code of the (Include)
     program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
    of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
     the editor 924570).
Louie

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Changing header in report painter

Hi All,
I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
Kindly help me out with this.
Regards,
Karthik

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

Add element in Report Painter

Hi All,
I am trying a add an element (to the individual/lowest level) in my existing report in 'GRR2'.
If I do not explode, element is created as below image,
If I explode, element is shifted to final level as below image,
But I want the element to be present at the lowest level as below,
* 1990
Note: The test '1990' will be replaced with the actual account name...
Expert advice is appreciated...
Thanks
Rajesh P

hi
Report painter
the below Pdf should help you
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/1377e443c411d1896f0000e8322d00/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
nagesh

Planned values in report painter

Hello,
Does anybody knows if it is possible to extract planned values (planned through transaction code FSE5N) into a report built through report painter tool?
My report is comming out with "0" values even though I have selected plan version and Plan/Act. indicator.
Appreciate any help!
Paula Rocha

Hi Stacey.
I have just tried, and no changes... Still have "0" values...

Index Currency in Report Painter

Hi,
Is there any way I could include the Index Currency as a key figure for my Report Painter reports?

Hi,
Before running the repport go to envoriment / option and expert mode.
Now you get extra buttons select currency translation. Here you can select what you want. You can create variant from this
Paul

Lead Columns in Report Painter

Hi All
Is it possible to have two lead columns in a report? My requirement is that i want to prepare a profit and loss account by using report painter. It should look like
Expense           Amount           Revenue          Amount
Exp G/L A/c       XXX             Sale G/L A/c      XXX          (For Example)
Now i want to define Expense column as lead column and revenue column as a lead column
Kindly help me with issue
Regards
Invin

Hi Abhijit
Kindly elaborate it I am new to report painter i would like to tell you again what is my specific design requirement
LEAD Column                Column 1                              LEAD Column                    Column 2
Expense                      Amount                                     Revenue                      Amount
(These four will be my columns under this following will be )
Salary Exp G/L       1000                                 Sale G/L A/c       2000 (For Example)
(This salary will be my heading and i will be typing in words and under this i will be assigning my salary Gl A/c same will be the case with Sale)
Now i want to define Expense column as lead column and revenue column as a lead column so that i can write Salary as heading and sales as heading just like traditional Profit and loss account what earlier we use to prepare by hand.
Kindly elaborate it how to do it
Regards
Invin
Edited by: sapcofi on Oct 6, 2009 1:37 PM

Dump in report painter

Similar Messages

Maybe you are looking for