Dump in spools generated before Upgrading to ECC6

Hello,
After upgrading to ECC6, we note that spools (sp01) generated in the previous version (46c) return the following dump: CONVT_NO_NUMBER ("Unable to interpret" 095 # "as a number").
The dump is produced in the function PREPARE_OTF_FOR_GUI_PREVIEWER.
I would like to add that the printing language is Russian.
Anyone knows if there is any program to run in order to fix these spools or any note to apply in order to solve this issue?
Thanks in advance for your help
Best Regards,
Leo

Hello
There is no solution for this issue:
"Unfortunately, there is no general solution for correcting the specifiedproblems AFTER the conversion.
To avoid the problems from the very start, execute one or more of the
following steps PRIOR TO the conversion:
o Printing the requests
o Archiving the ABAP lists
o Downloading the ABAP lists
o Converting the requests to PDF with the RSTXPDFT4 report
o Sending the requests by e-mail
According to our developer's feedback about this issue ,it is not
supported that try to convert an old OTF request that was created
before the Unicode conversion.
Best Regards,

Similar Messages

SPUM4 Issues before upgrade to ECC6.0

Hi All,
I am trying to do vocabulary check in SPUM4 before upgrade for ECC6.0. I have 3 Development clients 010,100,110.
My issue is that, I am not sure in which client I should do this vocabulary check. Is it in 000 or individual clients.I got this doubt because , I see the same texts in all the clients.
Can anybody help me in resolving this issue.
Thanks

Chandra,
We did a similar upgrade 2 years ago - 4.7 to ECC 6.0. We had also implemented cash managment on 4.7. The configuration for cash management in 6.0 is the same as in 4.7, so we did not have to make any changes to that. Also, I looked back at our upgrade testing documentation and we did not have any issues related to cash management.
Regards,
Shannon

Plug in compatability between BW plugin in R/3 and BI - R/3 upgrade to ECC6

Hello,
we are running SAP NetWeaver BI 7.0 Release 700 Patch 19.
Our underlying R/3 system is still 4.6C with plugin 2004_1_46C ( yes, I know it is time )
We are upgrading R/3 to ECC6 with plug in P701 Patch 3.
Questions:
1.) I would like to know where exactly I can see which ECC6 plugin is copmpatible with our BI Version.
2.) Did anyone who has upgraded to ECC6 experience any particular issues when upgrading the plugin?
3.) Sense check of approach - so far the simplistic idea from a BW perspective is:
New R/3 system has been created and connected to BW :
1.)     In BW ACTIVATE SOURCE SYSTEM
2.)     In source system connection option : Replicate datasources and activate
3.)     Transfer global settings u2013 first simulate then update tables u2013 no rebuild should be necessary
Before the Plugin P 701 in the R/3 ( ECC6 ) system can be upgraded the BW delta queues need to be cleared in the source system ( R/3.)
4.)     Clear out V3 queue either via BW as part of the jobplan ( or manually via RSA7 but would mean loss of data )
5.)     After run of batch schedule during posting free period check in RSA7 for entries in delta queue - should be empty
                     now.
6.)     Does the clearing of the delta might need to be run twice to clear the queue completely ?????
8.)                 Deactivate logistics cockpit via SBIW ...LEBW ( is this mandatory ? )
9.)                 If delta queues are empty and the logistics cockpit is deactivated then upgrade the plug ins in R/3
10.)               Then repeat step 1-3 and reactivate the logistics cockpit again
Is this it?
Many thanks for advise on this.
Regards
ChrisAC

SAP Note : 153967 and
https://service.sap.com/r3-plug-in should give some information on plug in compatibility...
8.) Deactivate logistics cockpit via SBIW ...LEBW ( is this mandatory ? ) - I think you just need to desachedule the collection jobs alone and not deactivate the LO Extractors and activate them once again...
Edited by: Arun Varadarajan on Oct 9, 2009 11:43 PM

Spool generated more than 1

Hi Expert,
My functional assigned my program (subroutine entry) and my smartforms to output type in MB1B.
I tried to posted MB1B, and the smartforms display correctly. But when i check in SP02 spool generated more than 1 for the same smartforms.
Seems like the smartforms was called for several times (same with how many spool created) --> i checked in the code the smartforms was called one time only in subroutine entry.
Maybe this information make you guys more idea:
Before i forgot to clear my internal table in the print program (subroutine entry) that called the smartforms and the internal table was append.
This what happened:
1 smartforms = 1 page (itab 1 record)
When i posted MB1B --> 2 spools --> 1 is 1 page (correct), 2 is 2 pages.
1 smartforms = 2 pages (itab 2 records)
When i posted MB1B -> 4 spools --> 1 is 2 pages (correct), 2 is 4 pages, 3 is 6 pages, 4 is 8 pages.
What i try to show is, why the itab also append? Even i forgot to clear the itab should be 1 soubroutine entry called 1 time only every time posted MB1B right? so the itab should not be append.
Now i clear the itab before call the smartforms.
This what happened:
1 smartforms = 1 page (itab 1 record)
When i posted MB1B --> 2 spools --> 1 is 1 page (correct), 2 is 1 page.
1 smartforms = 2 pages (itab 2 records)
When i posted MB1B -> 4 spools --> 1 is 2 pages (correct), 2 is 2 pages, 3 is 2 pages, 4 is 2 pages.
The pages correctly already, but why the spool still generated more than 1 spool?
Any idea for the possibility why this happen?
Best Regards,
Victor.

Hi Prashant,
If let say inside smartforms got multiple loop? is it can cause multiple spool?
I thought only if multiple call on the smartforms (not multiple loop inside the smartforms itself) will create multiple spool?
Btw Prashant,
If you see what happened when i forgot to clear my internal table.
2 records --> become 4 records --> become 6 records --> become 8 records..
What make me confuse is, this smartforms or the entry program that append that itab was called only by output type?
Is it possible the ouput type itself that triggered the smartforms more than 1 time?
Best Regards,
Victor.

Test-OutlookConnectivity WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer   ServiceEndpoint                               Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx                 Autodiscover: Web service request. Success   46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!

hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId                  : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint             : autodiscover.domain.com
Id                          : Autodiscover
ClientAccessServer          : CAS01.domain.com
Scenario                    : Autodiscover: Web service request.
ScenarioDescription         :
PerformanceCounterName      :
Result                      : Success
Error                       :
UserName                    : Gazpromuk.intra\extest_645e41faa55f4
StartTime                   : 8/21/2013 4:08:50 PM
Latency                     : 00:00:00.1250048
EventType                   : Success
LatencyInMillisecondsString : 125.00
Identity                    :
IsValid                     : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867

HT1766 I want to restore my iPhone to the backup I did just before upgrading to iOS6. Today's sync/backup erased most of my contacts and almost all of my phone numbers within the remaining contacts. No iCloud backup because of other issues still to resol

I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL. visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet. Thus, I am backing up to iTunes.
This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone. I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
Since I had a backup just last week, I'd like to just go back to it. But how? Or, is there another way to get my contacts restored? And why did they disappear? And what else may be gone that I just don't know about yet?

I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL. visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet. Thus, I am backing up to iTunes.
This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone. I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
Since I had a backup just last week, I'd like to just go back to it. But how? Or, is there another way to get my contacts restored? And why did they disappear? And what else may be gone that I just don't know about yet?

I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
I'm on a Macbook Pro and all of my software is up-to-date.
The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

SAP HR- Upgrade to ECC6- Project preperation

Hi Gurus,
Please can you help.
My company already have ecc5, and now want to upgrade to Ecc6. I am soon starting the project preperation.
What issues do I have to look into for this? technical and business minded.
Will the be anything to consider, discuss, change?
I am a junior, and have been giving the oportunity to start on this. I need all the help I can get.
Many Thanks

Hi
from the business perspective also look into the topic "enhancement packages" (see also the separate community here). Basically you can upgrade to SAP ERP 6.0 + implement enhancements from these packages in one step.
Recommended reading
- service.sap.com/erp-ehp (in particular the functional spaces there)
- Must Know Guide from /erp-ehp
- Master Guide for the highest Enhancement package (at current enhancement package 3) from service.sap.com/erp-inst
For the upgrade to SAP ERP 6.0 refer to the Upgrade (Master and Component) Guides from /erp-inst
regards
Andreas R

Bug in Inventory Audit Report before upgradation from SAP B1 2004B to 2005B

Sir,
We upgraded SAP Business One 2004B to SAP Business One 2005B on 26/05/2007. Earlier we were having SAP B1 2004 in which therer was no Inventory Audit Report function in Inventory Reports. After upgradation if we take Inventory Audit Report, the closing quantity of the stock is shown is correct but the value for negative stock quantity is wrong for period before upgradation i.e.upto 26/05/2007. The difference is exactly double of the stock value of that item. The closing quantity and value is OK if we run the report for the period after upgradation i.e. from 27/05/2007 to till date.
For e.g.
If we make A.P.Credit Memo for an item qty.20 value INR 20,000/- based on A.P.Invoice and take Inventory Audit Report, the qty.is posted as -20 but the value is posted as INR 20,000/- but actually it should be INR -20,000/-. That is the value is taken twice of the original value.
Reagrds,
Vishal Takte

Hi Vishal,
Please contact SAP Support for your problem; I think they should be able to help you to fix the problem.
Sorry for any inconvenience,
Frank
PS: Please note that such "application-related" questions fit best into the "SAP Business One" Forum...
Message was edited by:
Frank Moebius

Since upgrading to ios7 my iPhone 4S will no longer play music through docking station, worked fine before upgrade, it's charging but not playing any music at all

MY phone worked fine with the docking station before upgrading to ios7 now it's not playing music but still charging the phone, anyone have any ideas to what I could do to fix this please?

Restore your iPhone the updates may have corrupted your iOS installation

I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.

I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.

Have you checked the sorting settings to make sure they are as you expect?
OT

Upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?

upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?

So now I went back to the screen that orginally asked me for my Apple ID and passort, and instead of entering my Apple ID i entered the email address associated with it and the new password. It now tells me "You can't sign in because your account was disabled for security reasons. To enable your account, reset your passwort at iforgot.apple.com"
I have now changed my password twice and it still doesn't work.
Until I get this resolved my tablet is useless.

Before Upgrading to ARD 2.0 .....

Apple Remote Desktop 2.0
Before upgrading from remote desktop 1.2 - 2.0 enable VNC port 5900 - 5902 as well as ARD 3283 on the workstation. ARD v 2.0 requires both v 1.2 did not. If like me you did not know this you can copy the com.apple.sharing.firewall.plist (found in /Library/Preferences/ ) from a mac with these ports open and replace the com.apple.sharing.firewall.plist on the mac that does not using ARD 2.0 as the copy function does work - then reboot.
see the link below - alas I found this after the upgrade !
http://docs.info.apple.com/article.html?artnum=108047

Shouldn't this port access change have been part of the install process for the ARD 2.0 client software? I have been puzzling for days trying to figure out what I was doing wrong.
According to KB article 108047, ports 3283, 5900 and 5988 need to be open to get full access to client computers from ARD. I'm not sure what each of these ports is used for.
Now that I've opened the firewall to those ports using the Sharing preferences, I can access all the Macs on my LAN with no problem.

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie

How do I make a back up on Time Machine before upgrading to Mountain Lion?

A detailed process would be greatly appreciated. I've heard I should use time machine before upgrading to Mountain Lion for reasons I cannot remember.
Thanks!

Connect an external drive to your Mac. Open Disk Utility, it is in the Utilities folder in the Applications folder, and see if the external is formated Mac Extended (Journaled) and if it is not you can either use the Partition tab to Re-partition it as one partition and format it Mac Extended (Journaled) or you can use the Erase tab to Erase the drive and format it the Mac format. Name it anything you like.
Once that is done close Disk Utility and open System Preferences and go to the Time Machine Applet. Once that is open, If OS X doesn't ask you if you want to use that external as a TM backup disk, select "SelectBackup Disk" and select that external as a place to store backups. Then move the slider from Off to On and then TM will start the process of making a backup of your system. Once it is finished I suggest you turn it back off.

Dump in spools generated before Upgrading to ECC6

Similar Messages

Maybe you are looking for