Dump in User Menu
Hi Friends,
Whenever an user clicks on a folder in an user menu, this gives a dump. I am currently working on roles and authorizations. Can you please suggest as to why this dump is occuring, and what can be the probable solution to this.
Regards,
Birendra
Hi Birendra,
You can check the error on the dump your program is giving itself,
or you can check it also by going to t-code ST22.
Hope it helps.
Regrds
Mansi
Edited by: MANSI ASNANI on Feb 11, 2009 1:24 PM
Similar Messages
-
Dump while accessing Menu- User menu MESSAGE_TYPE_X
In the SAP initial screen under the user menu(Menu->User menu->General user transactions), when I am having a big number of tree sturcture under a specific folder like under 'General user transactions', I am getting dump with message MESSAGE_TYPE_X, AC_SYSTEM_FLUSH. This is happening, when lots of transactions are attached under any folder like 'General user transactions'. How to solve this. I am getting error in ECC6.0
Hi Sanjay,
1. reduce the number of transactions in one folder. Create more folders.
2. Ask your basis if it is because of memory issue?
3. Check in OSS if there is any specific note on the restrictions on the number of entries in the folder.
Regards,
Atish -
Hi Experts.
We are using Derived role concept, when user loged he unable to get User Menu, it is showing blank,
I have applied SNOTE: 1246860 and 1459115.
Still unable to resolve the issue.
Release: SAP_BASIS 700 SAPKB70022
Please help me.
Thanks & Regards,
Firoz.Update:
cause was a weak role design.
Expanding a folder caused MESSAGE_TYPE_X dump:
Termination occurred in the ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLU
The main program was "SAPLSMTR_NAVIGATION ".
In the source code you have the termination point in line 29
of the (Include) program "LOLEAU02".
CASE SY-SUBRC.
WHEN 0.
WHEN 1.
* system_error
MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
WHEN 2.
* method_call_error
>>>>> MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
WHEN 3.
* property_set_error
MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
WHEN 4.
* property_get_error
Too many entries on the first menu level. so the issue described in note 362883 appeared.
Redesign of menu structure would be the best solution, switches as per a.m. note are just a workaround.
b.rgds, Bernhard -
Unable to Open Bex report from SAP APO User Menu
Hi All,
I am an SAP APO consultant, and have not miuch expereice in BEx reporting. As APO uses Build in BI for reporting and pulling history from either external BW or R/3.
Now my issue all BEx reports we use are assigned ot my user menu and when I select a report, I would expect report to open but an excel sheet opens and closes and nothing happens. However I am able to open this reports from my desktop menu selecting Business explorer and Analyzer and linking my SAP system. I use Excel 2007 , Is this some compactibilty issue or is there anything I need to do?Hi KV,
There's a couple of possible root cause why you dont see properly the Bex Report.
Can you share to me the APO version and the BW software component being used?
In case this is still in the 3.x, 4.x APO, I think, a separate BW add on is needed for you to run your BEx report properly. You can ask your basis team for this separate installation.
Btw, is this report working before, meaning was it pulled successfully already in the past?
Can you try doing this again in a separate workstation, as the BW add on is installed separately per workstation.
Its possible that this is also an auth issue that the user you are using is not capable enough to run BEx.
As of now, I have not encountered any Bex issue that is related with the Excel version, I have tried running Bex in Excel 2007 no issue also. I think it maybe more related with the OS you are using, if its in Vista already what I know is you need to add your excel as a trusted document before you can run bex fro Vista.
Let me think of other possibilities.
Hope this helps.
- Jeff -
Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
TerryHi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to Hide User Menu at the Bottom of the Screen
Hi, all:
I am new to apex, currently using 3.2.1.
I have created a simple interactive report, the screen shows report data correctly AND
a user menu at the bottom. the user menu content is:
user name
Home Application 101 Edit Page 1 Create Session Activity Debug Show Edit Links
how do I hide this menu when end user access the app?
Thanks,
JohnHi,
That "menu" is called developer toolbar.
It is visible only when you have login to APEX builder and run your app.
So it will not be visible for end users.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
How to find the user menu of a user
Hi,
I have a request to change the description of a custom transaction in the user menu of a user. Im not sure
How to find the user's user menu...
Can we add any small documentation or comments to each object in user menu...
Thanks in advance
search before posting , it is a warning to you
Edited by: Vijay Babu Dudla on Dec 31, 2008 5:00 AM
Edited by: Vijay Babu Dudla on Dec 31, 2008 5:05 AMWelcome to SCN.
Just refer: [Area Menu Maintenance |http://help.sap.com/saphelp_nw2004s/helpdata/en/00/783b377bfdcf61e10000009b38f936/frameset.htm] -
Transaction code for user menu, sap easy access
Hi system experts!
Does anybody know which transaction causes the user-specific menu within "SAP easy access" (the welcome screen after login, like /n does) ?
I need it to be called from a portal iView, so that the usual sapgui-like screen with the user's menu appears in a portal screen, both for SAPGUI for windows and http.
Trx. S000 or SESSION_MANAGER does not cause the user-specific menu when called from the portal. These work least of all for call via ITS.
thanks
Andreashi ,
The transaction code is SE41.. This is for creating Menus and tool bars.
you can also try SMEN it will call the user menu as you described in your post.
Regards,
Krishna
Message was edited by: Krishnakumar -
Workbook in role but not on user menu
Hi All
I have a workbook saved under a certain role menu. The workbook apeears fine under the role when using BEx.
However, the workbook has disappeared from the User-Menu in SAP-GUI.
I have tried to refresh the user menu, change and re-save the workbook in the role (via BEx and via PFCG), I checked report: RSWB_ROLES_REORG but nothing helped.
I searched for notes but nothing seemed relevant.
Any help?
Thanks,
YanivHi,
The issue because of MS 2007. it would not be compatible sometimes.
for that you have install the latest patch for the BEx and dotnet framework on your desktop.
it would be available in the service market place.
or
We have had several issues similar running SAP BW 7.0 with BEx 3.5 workbooks after upgrading to Excel 2007. There are several SAP Notes concerning various Excel 2007 related errors. Most of these seem to be bundled in the just-released SAP BEx 3.5 Add-On Patch 7 for SAPGUI 710, so my advice would be to download this patch if you have not done so already.
Regards,
Marasa. -
Understanding the User Menu in XI
hi,
I am pretty new to XI (as you can probably tell by few queries i have posted).
When you log in to your XI SAP system, the system essentially displays a "User Menu", which includes many folder with different options for monitoring, sld, runtime settings, configuration,...etc.
Just curious to find out what each of the options on the user menu does and more so when would you actually use those options. Have tried to click on some of the options and get familiar with them. But is there a more specific document provided by SAP that explains each functionality (besides maybe the documentation help).
Also speaking as a beginner, what is a good strategy to get more acquainted and understand XI? Your thoughts would be appreciated.
Regards,
ManpreetHi,
Apart from help.sap.com, u have very good Articles in the <b>articles section</b> which will speak about Design, configurations, Adapters, Runtime and all u need in different pdf files and ppts. all u need to do is go to Articles section and serch for the Right document that u need. ( i cannot mention all the pdf file names here.. it will fill the whole page ).
also when u go to XI home page, u will find
<b>e-learning</b> link on the righthand side. Listen to the Beginners section.This will also help u a lot.
While creating scenario's u can look at the <b>weblogs section of XI</b>. and its a knowledge repository ( help.sap.com made simpler )
all the above mention links help u in understanding XI better. But u should start working on
1) simple File to File
2) File to DB and other simple scenario's to really get how things work in XI.
The best part is u already have weblogs (step-by-step procedure ) mentioning these.... )
For the rest u have XI forum )
Hope this helps you.
Cheers,
Siva Maranani. -
No user menu available in PI 7.1
Hi,
in a new installed PI 7.1 I logged on with my user (profile SAP_ALL), but have only the SAP menu and no user menu enabled.
I already checked table USERS_SSM with SM30 like described in note 380029, but it seems to be ok.
What is missing for enable the user menu?
Thanks and regards
PatrickThe profile is not enough also the needed role has to be added in PFCG.
-
I am loging in SAP. Initial screen come where it display User Menu and Sap
Dear All,
When i am loging in SAP. Initial screen come where it display User Menu and Sap Menu, but User menu is in active not showing but T code are executing then what object i have missed.
can u help me?
Thanks,
Regards,
SachinHi Sachin,
It doesn't care if you're using SAP_ALL or any of those profile. That is not relevant. I had that case a few days ago, I'm not using any of those profiles and I made it work with help of one post.
If you put the transactions in the tab "Menu" of the role in the PFCG, and if you activate parameters I mentioned in a prior post, then you should see the Menu.
Tables SSM_CUST and USERS_SSM. The first is global and the other is user-especific.
The link in one of the first post of this thread hace all the info.
That should work, that worked in my case.
What values the parameters have on those tables? The more the info the better.
Updating the parameters on those tables should help. If still doesn't work then you should check another parameter using transaction RZ10 or report RSPARAM.
If my info solves your problem, points are appreciated, if not, we will try...
Jose -
How to create a duplicate of the Manager ID field in the Create user menu
Hi,
I´m trying to create a duplicate of the Manager ID field in the Create user menu (with a different label). I need to add it a field with the same funtionality of the Manager ID field (search users with filters) but I don´t know how.
I try to made a new adapter using the Thor.API.Operations.tcUserOperationsIntf but it don´t let me to map the input parameters.
Also I try to assing an existent Lookup to a new UDF, but I couldn´t find the correct one.
Did anybody do that??
Thanks!Hi Kevin,
First I created a a user defined field called USR_UDF_CONDUCTOR (Lookupfield type).
Then I added the following lines to de FormMetaData.xml file:
</Attribute name="-750" label="global.label.conductor" displayComponentType="LookupField" variantType="long" dataLength="50" map="USR_UDF_CONDUCTOR">
<ValidValues lookupMethod="findUsersFiltered" operationClass="Thor.API.Operations.tcUserOperationsIntf" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
<AttributeReference editable="true" optional="true">-750</AttributeReference>
When I try yo Create a new user, the OIM System Administrator returns a System Error. -
Slow loading of User Menu While Logon
Hi,
I have created a new role with customized user menu. After assigning this role to my users, they start complaining about a very slow login to SAP as well as when opening a new session!
Any hits would be greatly appreciated ..
SheikhDear Sheikh,
To confirm the issue, use transaction STAD and filter by response time of the users - does it fit to the times which they experience? If the users experience higher than the STAD response time, then it could be a browser side issue (or network issue) which somehow ovelapped with the change of role, but is not related to the change of roles.
If STAD time is high, then look at the CPU time and DB Time - take ST30 and ST05 traces to narrow down the issue. Is it possible that you activated Authentication trace on the ABAP server and then did not switch it back?
Best Regards,
Sylvia -
Issue accessing workbook from user menu.
Hi,
We are facing an issue in opening the workbook from the User menu.
Workbook is working fine if we open it directly from BEx Analyzer but its not opening the workbook report when we click it from the user menu link.
This issue started coming when we upgraded the microsoft excel from 2003 to 2007.
Any information related to it would be helpful.
Regards,
Neha MaheshwariNeha,
We have had several issues similar running SAP BW 7.0 with BEx 3.5 workbooks after upgrading to Excel 2007. There are several SAP Notes concerning various Excel 2007 related errors. Most of these seem to be bundled in the just-released SAP BEx 3.5 Add-On Patch 7 for SAPGUI 710, so my advice would be to download this patch if you have not done so already.
Hope this helps...
Bob
Maybe you are looking for
-
Horizontal scrolling. Is it possible?
Hello. I'd like to create some pages for photos, similar to these http://dzineblog.com/2009/07/web-design-ideas-27-horizontal-scrolling-websites.h tml Is it possible? Thanks
-
Hi experts, I have to show an ALV table with the list of errors at the end of an operation. I have two separated views for this: one view when I run the operation and, at the end of this operation, I show a button and when I click on this button I ca
-
When editing in aperture, every version of photo displays in my project.
How can I get only the latest edited version of a photo to display in a project
-
BOBJ Crystal - Displaying Page No in the bottom Right of the each Page
Hello Experts Since it is cross tab Report, the cross tab always be a part of the Report header. So even if we put a Page No in the Page footer, it only appears in the last page. This is because the entire cross tab that spans across multiple pages
-
Subscription expires on sept 15, 2014, can i chancel on that day or they will autorenew before and will be jammed with adobe for another year ?