Dump opening planning book - error "CNTL_ERROR"

Hi Experts,
One of our users is experiencing the Dump while opening the planning book - error "CNTL_ERROR".
I found a similar thread but that is for version SCM 7.0.
Can somebody suggest the GUI patch or a consulting note for SCM 4.1.
Link for scm 7.0 = Re: Short dump in /sapapo/sdp94 Transaction
Thanks a lot.
Regards,
chandan

HI,
To solve the issue apply the note 1279860.
This note will correct the error.
Regards,
Sunitha

Similar Messages

  • While opening Planning Sheet Error message came like : Invalid Offset ....

    Hi ,
    I uploaded the data and when we are trying to open planning sheet Its showing error message :
    Invalid offset for {XYZ-ITEM: Supplier_DM : CP1_Yield:2012-Q2]
    We encountered a problem performing your request.
    Please notify Oracle , referring to error tag [gdpdjn].
    And error Tag and ITEM change with every trial.
    Please let us know your thoughts. And I would be grateful if somebody can help to decipher that error tags eg.[gdpdjn] also.
    Thanks
    Lokesh Rathi

    When Base data is updated using Uploadable Report instead of updating aganist scenario we got this error.Oracle recommened not updating base data using uploadable reports.
    Thanks,
    Hari Devarapalli
    Edited by: Hari Devarapalli on Jun 13, 2011 11:46 AM

  • Planning book error during export

    Hello all,
          Once a week we export planning book to compute for the average base demand to be used for safety stock calculations. When we tried debugging the error we found this:
    /sapapo/clp 053  planning book and data view combination doesnt exist.
    we have tried running consistency checks but it didnt help. from what we can see, this error came right after changing the fiscal yr variants (periods for 2010 and 2011). from our checks when we pull 2010 there is no error but when we include 2011 we see the error. we have checked everything possible from planning area to storage buckets to fi yr variants but we couldnt tell what is causing the issue. we do not know what else might be causing this error.
    Colin

    Hi Kirankumar ,
    This is the problem more related to the defining Proportional Factor
    See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
    Thanks in advance for rewarding points  if this helps ,,,
    Regds ,Digs....

  • Planning Book Error (/SAPAPO/ADVX_MACROS_GET )

    I created a planning book and used /sapapo/sdp94  to enter into planning book
    when deleted using same transaction /sapapo/sdp8b , and now when i am trying to use trans code /sapapo/sdp94 ..its not letting me go in .
    It is giving  an  Internal error: /SAPAPO/ADVX_MACROS_GET
    When i use some other id and go to planning book through  /sapapo/sdp94 ..i am able to go there .
    Anybody knows about it . It would be highly appreciated and suitably rewarded

    Issue resolved . I recreated planning book with same name

  • Planning Book Error during forcast voew

    When i am change the dataview  time bucket profile (i.e .Period structure settings) planning book for Monthly display of Data View instead of present view which is weekly an error pops up as:
    Period to date 31.01.2008 cannot be determined
    Message no. /SAPAPO/MA 120
    Diagnosis
    The system cannot interpret one or more of your data entries.
    Procedure
    Check the date parameters for this operation, and change accordingly.
    please suggest what to check to resolve the problem...
    thanks in advance

    Hi Kirankumar ,
    This is the problem more related to the defining Proportional Factor
    See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
    Thanks in advance for rewarding points  if this helps ,,,
    Regds ,Digs....

  • Planning Book error

    Hi
    When my user is trying to edit a KF "A'', he gets an error saying he is not authorised to edit KF "B".
    He works normally everyday. Few times, he gets such error. There is no authorisation errors, as he works normally other days, so i ruled out that option. Where else, I should check for ? Not understanding this error. Surprisingly, it points to different KF B when he is trying to edit KF A.
    How this could happen ?
    Any suggestions ?
    thanks
    venkat

    Hello M,
    There are few default Macros in the dataview but not effecting KF B.
    and this error is reported by only one user. To think, security, why sometimes he is able to work, few times, he gets that error. (so i am ruling out the authorisation issue).
    When i took his SU53, it points to some macro 'Delta (KF C - KF D)' for activity 16.
    He is  basically getting this error, when he is copying bunch of rows (7 rows) and pasting in Pl book. But if he does only for single row copy and paste, he does not get that error.
    My main worry is why the error says no Authn for KF B. Why he is getting that error for all of the rows together not for single rows.
    any clues pls..
    Edited by: venkat babu on Oct 29, 2008 10:07 AM

  • Getting error trying to open purchased book "Error getting license, license Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKOWN:

    Was able to download this on another computer, but on current computer get this erro

    Please refer to the KB article, Public Knowledge Base

  • Error while loading the planning book

    Hi There,
    I am getitng the below error while loading the data in planning book
    "Error for COM routine using application program (return code 40,016)
    Error reading data - Planning book cannot be processed further"
    Ran  /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
    Could you please advise?
    Thanks,
    Krishna

    Hi Krishna,
    Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
    Regards
    JB

  • Time bucket not displaying in planning book

    When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
    @5C\QError@     Insufficient information about read period transferred
    @5C\QError@     Error reading data - Planning book cannot be processed further
    Insufficient information about read period transferred
    Message no. /SAPAPO/TSM231
    This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
    Any idea what went wrong?

    Hi Nic,
    Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
    Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
    Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
    If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
    If time buckets profile exist, then check the following:
    1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
    2) Go to /SAPAPO/TR32  (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
    3) Check what periods are used in storage bucket profile.
    4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
    Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
    Thanks - Pawan

  • In Planning Book fo DP how do I change desing view of Selcted objects part?

    Hi All,
    Can anyone advice how I change view of Slected objects which is on left side top of planning book.
    When we open planning book and use selction to select display divisiona and select all Divisions , in selected object box all divisions are displayed as 1,2,3 in 3 columns. Now we want this to change and change one column as description and provide description of division.
    Can anyone show me process of how do I do this.
    Thanks
    KV

    Hi KV,
    Above the selection area you can find Choose selection fields button if you select that the following fields appear in the popup.
    Field for any characteristic value (external display)-CHAVLEXT
    Field for any Characteristic Value-CHAVL
    Short Description-TXTSH
    Medium Description-TXTMD
    Long description-TXTLG
    You can have a CVC formate whre division description also ceate. or
    You need to create a info object create infoprovider and assign this infoobject. create info source and extract these fileds from ECC.
    Regards,
    Kishore Reddy.

  • Dump for custom planning books in SDP94

    Hi,
            We are having a fresh SCM APO 5.0 installation. We used to get a dump whenbever the SDP 94 transaction  was executed. We found a SAP note 889989 and applied. Now the problem is it is dumping for any other planning book except the standard SAP delivered ones when the SDP94 transaction is executed. I found a note 498861 but does it help?
    Here is the dump:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          10/10/2007 16:39:31
    Short text
         The current application triggered a termination with a short dump.
    What happened?
         The current application program detected a situation which really
         should not occur. Therefore, a termination with a short dump was
         triggered on purpose by the key word MESSAGE (type X).
    Error analysis
         Short text of error message:
         Control Framework : Error processing control
         Long text of error message:
          Diagnosis
              An error occurred when the system tried to process the commands
              from the Automation Queue on the presentation server.
              There are several possible reasons for this:
              - The installation of the SAP GUI on the presentation server is
              faulty or obsolete.
              - There is an error in the application program
              - There is an error in the SAPGUI or an integrated control
          Procedure
              1. Make sure that you have imported the appropriate Support
              Package, the current kernel, and GUI patch for the release of your
              system
              2. Check whether the error occurs locally on one or a few PCs, or
              generally on all PCs. Note whether the error only occurs for some
              users, for example because of a specific Customizing setting.
              If it only occurs locally, this suggests an installation problem
              with the PC. Check the installation; if necessary, reinstall thesoftware. In the dump, search for the SY-MSGLI field, since it may
    point to the cause of the error.
    3. Activate the Automation Trace (in accordance with SAP Note
    158985).
    4.Start the transaction and continue until the screen immediately
    before the dump.
    5. From the System -> Utilities menu, choose Autom. Queue,
    Synchronous Processing.
    The status bar of the GUI displays the text:
       "Automation synchron flush mode on"
    6. If you now proceed with the application, the short dump will
    display the ABAP call that caused the error; the Automation Trace
    will contain the error on the presentation server.
    7. If necessary, load the short dump and trace files on to
    sapservX, so that SAP can analyze them.
    Trigger Location of Runtime Error
        Program                                 SAPLOLEA
        Include                                 LOLEAU02
        Row                                     29
        Module type                             (FUNCTION)
        Module Name                             AC_SYSTEM_FLUSH
             Can any one suggest me a solution please?
    Thanks.

    hi Raj,
    this normally happens for all the new installations when opening the planning books with tcode /SAPAPO/SDP94. every new installation gives different dump with the above tcode. the best option is to contact the SAP team.
    regards,

  • Planning layout error while opening

    Hi,
    Planning layout is not opening, but it was worked for the past two months.
    It shows the below while opening of the planning layout..
    Errror reading of data from the info provider.
    System error in program in CL_RSDRC_SELDR_SRVS  and Form_Seldr_to_slide_node_ch01
    Regards
    Perasel
    Edited by: Perasel on Aug 13, 2008 3:47 PM

    Look at the dump in st22 and errors in sm21 .check the transaction code SNOTE to check whether the note 1024741 is implemented.
    The following is from the above note:
    Solution for your problem.
    Import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013) into your BI system. The Support Package is available once Note 991093 "SAPBINews BI 7.0 Support Package 13", which describes this Support Package in more detail, has been released for customers.

  • Error in Planning Book

    Hello Experts,
    User is facing an weird error popup while entering in SDP94. User do not have access to load / change the data in PB. This issue is not replicable from our side.
    Error : "Graphics control could not be created; check method call"
    Please suggest the soultion to fix it.
    Regards
    Rahul Chitte

    Hi Rahul,
    Seems like authorisation issue.  I suggest you can involve
    basis or security team to fix the exact issue
    1) Check the user settings using /SAPAPO/SDPUSET
    2) Check assignment to planning book /SAPAPO/SDPPLBK
    3) Check su53 dump of user and compare it with your dump
    to find out the missing objects
    Regards
    R. Senthil Mareeswaran.

  • Help! Error: Failed to open Address Book Database on Palm Desktop

    In advance, thank you, thank you, thank you to the person who saves me from this error! I have no idea what I've done to deserve this!?! So, thank you for helping!!!
    Here's the problem:
    When I double click on the Palm Desktop icon on my desktop, I get: Error: Failed to open Address Book Database on Palm Desktop
    And then, I get: This program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor.
    When I click on the details button, it says: PALM caused an invalid page fault in
    module MFC42.DLL at 0177:5f404045.
    Registers:
    EAX=0082fad8 CS=0177 EIP=5f404045 EFLGS=00010202
    EBX=00000000 SS=017f ESP=0082fa94 EBP=00855d0c
    ECX=5f4d1c58 DS=017f ESI=0082fad8 FS=572f
    EDX=00017b84 ES=017f EDI=00000008 GS=0000
    Bytes at CS:EIP:
    8b 07 3b c8 74 34 83 79 f4 00 7d 0f 83 c1 f4 3b
    Stack dump:
    00000000 008558c0 004b5d3d 00000008 01befe17 0082fad8 008559cc 008558c0 00855d0c 00000000 00000010 5f4d1c58 00000000 00000000 00000000 00000000
    Again, thanks for your help in advance!
    Post relates to: Palm Vx

    I've seen a lot of people post a message that's basically like the problem I'm having. I'm sending this to everyone who had the same general type of question in hopes that my fix might cure your problem also.
    My Palm Desktop (4.1.4) would open correctly the first time after installing, but after doing a hotsync it would crash every other time it was opened (using a Tungsten E). I'm running Windows XP Professional, and it would give an error saying "Windows XP has encountered an error and needs to close", or something like that.
    I did the usual. Removed the program and reinstalled, which didn't work. I also went through the tedious process of uninstalling the software, then removing every registry entry by hand that referenced the Palm or Pocketmirror, which also didn't work.
    I searched through the support files on palmone.com and found something that gave me an idea. It talked about removing a corrupted file to fix problems with the datebook. I hadn't been getting any errors pointing to a specific problem, but on a hunch I deleted the entire address folder out of the Palm directory. That did the trick!
    A corrupted address book in the Palm Desktop software was keeping it from running. The problem was how to fix the corruption, which I eventually found on a menu option in the Palm Desktop software.
    Below is the fix that worked for me. Caution! Only do this if you have all of the current info in your Palm, because it will erase what's on your Palm Desktop.
    1. Go to your Palm folder on your pc (default install location is c:\palm) and open the folder for your user.
    2. Delete the address, datebook, expense, memopad, note pad and todo folders.
    3. Open the Palm Desktop program.
    4. Do a hotsync.
    5. Important! Don't click on anything else in the Palm Desktop after doing the hotsync. If you change to one of the areas that has corrupted data, it will immediately crash.
    6. Right after doing the hotsync, click Tools on the top menu in the Palm Desktop, then Options. Click on the Tools tab and then click Check Now to fix the corrupted data.
    7. Click OK.
    That should hopefully get you running again. Let me know if that worked for you.

  • Error in updating ALV field catalog in selection tool for Planning Book

    Hi ,
    I am Implementing BADI  '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
    This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
    1). INIT_OBJECT_LIST
    2). F4
    3). LOC_PROD_VALUE_LIST
    Please help on the same if u have any idea or clue.
    Thanks.

    Hi Srinivas!
    Where did you get your implementation from?
    It would be nice if you could debug your code!
    For the F4 method, have you seen this note?
    Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
    Also check this note. It contains selection modifications in the BAdI:
    Note 376902 - SDP selector: Basis corrections for BADI
    I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
    Thank you!
    Will
    SCM Support Consultant

Maybe you are looking for