Dump template when change page

Hi all,
I create a template. To freeze the first column of my request I must enter a number on the property u201CNumber of data Columns Displayed at Onceu201D of the web analysis item.
But when I put data in my template, I canu2019t change page.
There is a bug:
The initial exception that caused the request to fail was: 
java.lang.NullPointerException
What is going on?
Thanks & Regards,
Benjamin
Edited by: Benjamin Gravouil on May 22, 2008 9:03 AM

I have just seen the source of the problem.
I enter 5 on the web analysis property "Number of new lines". We can't have new line with paging....
When I don't have new line, the paging work very well....
Has anybody ever had this problem ?
Thx
Benjamin

Similar Messages

  • ORA-06502 on "Help Text" region when changing pages on a tabular form

    Hello everybody,
    We are developing an application on Apex 4.1.0.00.32. This application have some pages with tabular forms and these pages uses a page zero as template. In this page zero, we have added two sidebar regions: a list region to navigate on the application and a help text to describe how to use our application.
    The problem occurs when the tabular split the records into pages (since it has more records that it can show on a single page). When the user clicks to change to another page, Apex raises an ORA-06502: PL/SQL: numeric or value error as described below:
    Erro ao renderizar a região "Ajuda". ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
    Informações Técnicas (visível somente para desenvolvedores)
    is_internal_error: true
    apex_error_code: APEX.REGION.UNHANDLED_ERROR
    ora_sqlcode: -6502
    ora_sqlerrm: ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
    component.type: APEX_APPLICATION_PAGE_REGIONS
    component.id: 2
    component.name: Ajuda
    error_backtrace:
    ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
    ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
    Obs: Our database is in Brazilian Portuguese, so I guess it will be hard for some people to understand the first two lines! :)
    We have tried to change the pagination style of the tabular form and change the region model of the help text but the problem still happens.
    Does anyone an ideia about what this may be?
    Thanks in advance!

    I am getting the exact same message, to the line number, also in APEX 4.1.0.0.32.
    Occurs when changing pages in a classic report, Standard region template, select list pagination, when selecting a different pagination set.
    In English:
    Error during rendering of region "Matched Participants Help & Hints".
    ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    Technical Info (only visible for developers)
    is_internal_error: true
    apex_error_code: APEX.REGION.UNHANDLED_ERROR
    ora_sqlcode: -6502
    ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    component.type: APEX_APPLICATION_PAGE_REGIONS
    component.id: 2
    component.name: <strong>Matched Participants</strong> Help & Hints
    error_backtrace:
    ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
    ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
    There are no conditions on the region, and no date string within the Help text. Some HTML <strong> tags, that's it.
    The Help region renders fine the first time.
    The Debug info does not help any:
    3.798360.00062Computation point: After Box Body4
    0
    3.798990.00081Processes - point: AFTER_BOX_BODY4
    0
    3.799790.00068Region: <strong>Matched Participants</strong> Help & Hints4
    0
    3.800470.00213Region rendered dynamically because request was not null4
    0
    3.802590.00096Add error onto error stack4
    0
    3.803550.00084...Error data:4
    0
    3.804400.00084......message: Error during rendering of region "<strong>Matched Participants</strong> Help & Hints".4
    0
    3.805240.00084......additional_info: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
    0
    3.806080.00081......display_location: ON_ERROR_PAGE4
    0
    3.806890.00081......is_internal_error: true4
    0
    3.807700.00084......apex_error_code: APEX.REGION.UNHANDLED_ERROR4
    0
    3.808540.00082......ora_sqlcode: -65024
    0
    3.809350.00234......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
    0
    3.811700.00082......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654 ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204 4
    0
    3.812510.00081......component.type: APEX_APPLICATION_PAGE_REGIONS4
    0
    3.813310.00110......component.id: 24
    0
    3.814420.00099......component.name: <strong>Matched Participants</strong> Help & Hints4
    0
    3.815400.00076...Show Error on Error Page4
    0
    3.816160.00344......Performing rollback4
    0
    3.819610.00225Processes - point: AFTER_ERROR_HEADER4
    0
    3.821850.00268Processes - point: BEFORE_ERROR_FOOTER4
    0
    3.82453-End Page Rendering
    Any thoughts on where to poke around for this one?
    Thanks - Karen

  • Why flash white when changing pages?

    why does my website flash white when changing pages? it is very time consuming and i wish for a better flow.
    thank you.

    www.oddussee.com
    Could it be that I am not using business.catalyst? I did an EXPORT TO HTML.
    Thanks!
    Message was edited by: oddussee

  • Sparse templates (when adding page types)

    I'm not sure if this has already been posted in the forum, but I discovered it as I dealt with the growing number of templates, v1.1 templates, and custom templates that my iWeb now has. Also helps stub out the v1.1 'Blank' page type for older custom templates.
    When adding templates to iWeb, iWeb seems to like it's TemplatesInfo.plist to contain EVERY page type for EVERY template. However, as I'm developing a new template, I sometimes like to have just a few page types defined... or, sometimes I create a simple template for a simple site that only has a couple of page types.
    So, when I am defining the new entries for each template within a page type, I specify a bogus filename (I use "Unavailable.webtemplate") for any entry where I don't have that page type / template combination. For example, if my "DogDays" template only has a Welcome and Blog page type, then in every other page type the DogDays template's entry will use the bogus filename.
    Pictures help make this much more clear, so here's a page that I posted to remind me how to add a new page type... I use the bogus "Unavailable.webtemplate" in the example:
    http://web.mac.com/dovinci/iWeb/dovinci/New%20Page%20Types.html
    It also shows what the "page picker" in iWeb looks like.
    Mac Mini, PowerBook, MacBook Pro   Mac OS X (10.4.6)  

    Hi,
    The design for a calendar date box is determined by the "formRegionBody" class style (at least according to theme 12). You, therefore, need to update this.
    In theme 12 ("Blue"), this is defined in the css as:
    .formRegionBody {
    font-size:12px;
    font-weight:normal;
    color:#285577;
    background-color:#D7DFE6;
    border-left:1px solid #BFBFBF; border-top:1px solid #BFBFBF;
    border-right:1px solid #FFFFFF;border-bottom:1px solid #FFFFFF;
    You can either update the css or add the above in a style tag on your calendar page (adjusting the colours as required).
    Regards
    Andy

  • Lose of formatting when changing pages

    Hi;
    I started using the new forum. There are quite a few changes and it will take me some time to learn to use it again. So far I think it looks like it may be an improvement.
    One thing I have been noticing is the lose of formatting when I change pages. Usually if I reload the page a second time the formatting returns. Is this a problem for me only or is it possibly something to do with new forum?
    Thanks
    Allan

    Hi Allan,
    It's not just you. Still getting the kinks out I suppose. Let's hang in there!
    Lori ☀

  • "Memory Full" error when changing page setup

    I'm running Crystal Reports 2008 and yesterday I had two landscape reports begin doing some weird things:
    Symptoms:
    -Any change to the Page Setup dialog throws the Memory Full error (even just bringing it up and clicking ok)
    -The reports were created as landscape but are displaying as portrait in Page Setup and in design view
    -A handful of fields are displayed without text in them.  If I delete these fields, save, and re-open other fields will not display information (in design view)
    Troubleshooting:
    -If I remove ALL fields from the reports, save, and re-open the report tells me I have an invalid printer but will allow me to change Page Setup.
      *While this works, I really do not want to create the reports again from scratch.
    -I have tried removing and re-installing Crystal 2008 with no luck.  However, it remembered my recently opened reports which makes me think the uninstall didn't remove everything.
    -I have rebooted to make sure all memory available is free.
    Does anyone have troubleshooting ideas for me?  Thanks in advance.

    The link takes me to a page saying "The system cannot find the file specified. "  I also tried downloading the .exe version and got the same result. 
    I was able to find an SP3 download but after unpacking the files and selecting my language I get a message "Crystal Reports 2008 SP3 Update can not install because the version of the product on the system is too low."
    I downloaded the SP3 file from here:  http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs
    I also tried this one with the same effect:  Crystal Reports 2008 Reference [original link is broken]
    I assume I downloaded an update as opposed to the "full version", is there another full version available somewhere?

  • What are the things to be changed when changing page name, model, jws, etc?

    Hi Everyone,
    My jdev version is 11.1.2.3.0.
    I have developed one ADF application with one page and it is working fine.
    Now i need to change my page name so i modified and it is also working fine.
    But while deploying it gives error like model-viewcontroller already exists because previous application without changes is already there in server.
    without disturbing the previous application i need to deploy this changed application as a new application to the web logic server.
    For that what are all the changes i need to perform and where to perform?
    Please give suggestions.
    Thanks.

    You only need to change the webroot and the application name (you may try with the same application name, but I', not sure it works then).
    When you then deploy the server take the ear a new application.
    Timo

  • Images sticking when changing pages

    Hi,
    I'm having an issue with Interactive PDFs exported from Indesign CS6.
    On some pages when you move on to the next page, a portion of the previous page will remain visible as a band across the page. If you click on the affected part of the pageit immediately changes and displays correctly. This happens whether moving forwards or backwards through the document.
    Any advice on what might be causing this and how to remedy it? Again, it's only certain pages which will do this and it happens even if you change the page order.
    Thanks in advance.

    Thanks for the reply, CtDave.
    Hopefully the graphics device is ok, the laptop is only a couple of months old and is a fairly high-spec and good quality HP machine. The system seems to otherwise run the rest of the CS6 package without any faults.
    I have noticed however that this error only occurs when viewing the files in Acrobat, not in Adobe Reader 9.

  • Flash menu that highlights the selected item when changing page?

    Hi all,
    I'm trying to create a menu in flash that will highlight the
    current
    selected menu item when selecting a specific page.
    Example menu:
    - home
    - products
    - product 1
    - product 2
    - product 3
    - contacts
    - email
    - form
    Imagine you have a link in a page that opens the contact >
    email page.
    Is there a way to get the flash menu to highlight the
    "contacts > email"
    item when displaying this page?
    Something similar to this
    http://tinyurl.com/5c9993
    Is there an application that can do this easily?
    Thanks in advance for any idea.
    Tony

    here is a link to a rar file i just updated for ya.
    it is a flash movie and 2 web pages. showing how u can send
    variables to flash with java script.
    http://www.wholesalegranitedist.com/home/tutorials/jsquery.rar
    if you can't get this file let me know i will just post it
    here.
    you will have to change the menu depending on which variable
    u send. to flash. it can change on which page you visit;). ask more
    questions if you need to. or private message me.

  • Website Shake when changing pages

    Hello,
    We've developed a new part of our website on www.ingles.babylon-idiomas.com/es/ using DIVs to nicely centralize the page on the screen. The problem however is that with every page change, the website does a little "shake" as the right hand scroll bar disappears and appears again. Any idea what we can do to get rid of this "shake"?
    Steven

    This is caused by the browser having to work out the position of the div's then built the tables.
    Also try changeing all the left and right margin values to -
    margin: 0 auto 0 auto;
    To centralize the display in the window, this is only required in your outer wrapper div, not every div.
    HTH
    PZ

  • HELP! Trying to print on an envelope (logo/return address), but when change page/paper size, prints blank page

    Before now, I have really only used Acrobat to convert and send uneditable documents (just to give you an idea that I am not used to trying to edit docs or print them out in paper sizes other than 8.5 x 11.  However, I have a document (created by a graphic designer) that was designed to be viewed as a sample, not really to be printed and now want to print it directly on an envelope.  I have created a custom paper size in the Print Setup menu and have also cropped the PDF page size to be similar (although not exact) to the envelope size.  When I try to print it, my printer prints out a blank page.
    Any thoughts?

    You need to select the paper size in the printer setup that corresponds to the letter size that you are using.  If you just crop to the approximately correct size you may find that the orientation of the page is wrong and various scaling options in the print dialog box can further confuse the issue.

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • Change the default HTML template when saving for web

    Hi,
    Is there a way to change the default HTML output template when you go to "Save for web" and select "HTML & Images"? I would like to modify the default HTML <head> tag.
    Thanks.

    Two observations.
    First — "Tools-> ...." is specific to Acrobat X and XI. It did not exist prior to Acrobat X.
    Second — Acrobat 9 Pro / Standard (nor earlier release) does not support viewing a PDF page containing a scanned image and performing a right-click  ... Save Image As. 
    The context menu provided by Acrobat 9 Pro with a right-click on a scanned image is:
    The context menu,from a right-click with the TouchUp Object tool selected, for Acrobat 9 Pro is:
    So, to paraphrase what Paul Harvey used to say ... What's the rest of the story?
    Be well...

  • Any way to turn off errors when updating pages from the template?

    I'm using Dreamweaver MX. My site is huge. It's an intranet
    spanning dozens of departments. Some of those departments have
    subsites that don't fall under the intranet's control, although
    they are embedded within our site's folder structure. When I make a
    change to the template and update pages, every time I hit one of
    those subsites I get tons of errors, from "template not found" to
    "unmatched body tag". The errors that pop up each have to be
    clicked on before the updating can continue. I get hundreds of
    these.
    Is there any way to make errors not pop up while updating
    pages from the template? Or even to exclude certain folders from
    being checked? (Cloaking doesn't do it.)

    > I'm using Dreamweaver MX. My site is huge.
    Both of these are problems, I'm afraid. Combining that with
    templates is
    really trouble.
    > "unmatched body tag".
    Errors such as this are definitely caused by errors in your
    page itself.
    Can you show me a page where you would get this?
    > Is there any way to make errors not pop up while
    updating pages from the
    > template? Or even to exclude certain folders from being
    checked? (Cloaking
    > doesn't do it.)
    Valid code will not produce these errors. Unfortunately, the
    only way to
    avoid them is to remove any validation hiccups from your
    pages.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "abna" <[email protected]> wrote in message
    news:f14ue2$pk5$[email protected]..
    > I'm using Dreamweaver MX. My site is huge. It's an
    intranet spanning
    > dozens of
    > departments. Some of those departments have subsites
    that don't fall under
    > the
    > intranet's control, although they are embedded within
    our site's folder
    > structure. When I make a change to the template and
    update pages, every
    > time I
    > hit one of those subsites I get tons of errors, from
    "template not found"
    > to
    > "unmatched body tag". The errors that pop up each have
    to be clicked on
    > before
    > the updating can continue. I get hundreds of these.
    >
    > Is there any way to make errors not pop up while
    updating pages from the
    > template? Or even to exclude certain folders from being
    checked? (Cloaking
    > doesn't do it.)
    >

  • How to updates file when template is changed

    Hello fellow dw users..
    Is there somebody whocan help me. My problem is that I
    created my website by using a template,
    now I need to chagne the color and some background images on
    my template after updating the template
    how would I let all my web pages be affected and follow and
    use the updated the template instead of the old one? hope you can
    help me . thanks a lot!!

    When you save the changed template, all changes to
    NON-editable regions are
    automatically propagated to all local child pages of that
    template. Is that
    not happening for you?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "teamse1" <[email protected]> wrote in
    message
    news:eb7ljd$12b$[email protected]..
    > Hello fellow dw users..
    >
    > Is there somebody whocan help me. My problem is that I
    created my website
    > by
    > using a template,
    > now I need to chagne the color and some background
    images on my template
    > after
    > updating the template
    > how would I let all my web pages be affected and follow
    and use the
    > updated
    > the template instead of the old one? hope you can help
    me . thanks a lot!!
    >

Maybe you are looking for