DUMP when activating an Infsource or accesing the Scheduler

Friends,
I'm having a very annoing dump.
when activating an infosource (Transfer_Structure/Transfer_Rules), connected to a Business Content Datasource, there is a message telling me there is some warnings and that I should check the log.
¿what transaction do I use to check that log?
If I try activating the infosource once or twice, it finally shows activation OK message.
If I create an infopackage for that Infosource, a dump appears, and I can't even see the scheduler.
If the infosurce already have an infopackage, and I double clic on it, the same dump appears.
The dump Error Analysis shows
Short text of error message:
Data request to the OLTP ***
and
"RSM1_CHECK_FOR_DELTAUPD" (tips for notes searching)
I tryed deleting the infopackage (it is created, but you cannot see its scheduler), deleting the infosource assingment, and then recreating it, bu the problem remains the same.
Does anyone have an idea?
thanks in advance
Mauricio

Hi Christian,
thanks for the advice.
We are using BW 3.1 and CRM 4.0
I think note 424848 applies to my situation.
I think note 834249 doesn't apply, but we have 14 SP level, and they recommend using 21 level. This will remain as "Plan B".
I checked tables ROOSPRMSC and ROOSPRMSF in CRM, as the 424848 note says, and I found some entries for some of the datasources I need to fix.
The note says that I should not run the RSSM_OLTP_INIT_DELTA_UPDATE report if I find entries in this tables referencing the datasources I need to fix.
I also checked RSSDLINIT and RSSDLINITSEL tables in BW, and there are no discrepancies with CRM tables. does this mean that I can run the report?
What Should I do?
thanks again.
Mauricio

Similar Messages

My Itunes software, when activated, cuts off 3" of the right portion and 1" of the bottom of the screen. Everything available in this section of the screes is not available, making the software practically unusable. Has this happened to anyone out there a

My Itunes software, when activated, shows an image on the screen of the normal itunes image except that about 3" of the image is cut off on the right side of the screen and about 1" of the bottom. All functions shown work. Any function in the part of the screen that is not shown, is not available, making the softwave almost nonfunctionable. When I upgrade, this is usually resolved, until it starts happening again. Since I currently have the latest version of Itunes, I cannot try this solution, which is only temperary anyway. Can anyone help me?

Could you post a screenshot of the display for us please, bili?
Save the screenshot in an image file, start a new reply here, and use the wee camera icon at the top of the reply window to insert the image file into the reply.

Dump when activating transfer rules

Hi All,
             I am trying to create transfer rules and activate from a DB connect source system and I am getting the following error when activating.
Runtime Errors         ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
      activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
      for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
Can somebody help me with this error?
Thank you.

BI User
Please check the OSS Notes 914998 and 791549 and see these notes helps
Thnaks
Sat

Short Dump when activating the Workflow

Hi,
I have a problem, when i try to activate the workflow I get a short dump with the error "SYSTEM_NO_ROLL". As I understand the error is because there is no enough memory to the transaction, this is not the case i have checked that, so the error must be from my workflow definition or from the SAP it self.
Here goes the description:
The location of the error is in the method "FIND_ELEMENTS" of class "CL_SWF_CNT_CONTAINER". By this I understand that the error was with my container elements in the workflow but I have reviewed all my elements and I cant find any fault element or error. I can check the definition but if i try to activate it i get the short dump.
In the Calls Stack, there is +/- 69297 calls to the above method, because that method is recursive the transaction just consume all the memory and then i get short dump.
I use many multi line elements, for parallel processing with block step mostly, maybe its my container elements but i can find no wrong bindings or faulty elements.
Any help would be greatly appreciated.
Regards,
Diogo Silva.

Hi,
Ok didn't know, thanks for the help, i will post in the other section.
PS: Could you tell me how to reach that component, I tried but without success.
Regards,
Diogo Silva.
Edited by: DiogoSilva on Jun 15, 2011 7:01 PM

Short Dump When activating BI Objects

Hi Experts,
When i try to activate any object ie., InfoObject, InfoCube, etc. it is moving to short dump. Can anyone please help in this issue, why it is going to short dump.
Thanks & Regards
Ramakrishna Kmaurthy

Hi Ramakrishna,
Can you please be more precise? What is the type of shortdump?
Shortdumps do not directly have to be a basis issue.
Please post the "subject" and the "short description" from the shortdump (ST22) in this thread.
Regards,
Steven Groot

ASSERTION_FAILED, Short dump when activating Transformation in BI7.0

Hi All,
I have migrated 3.5 update rule to 7.0. And during transformation activation i am getting short dump giving following messges:
"ASSERTION_FAILED"
"CL_RSTRAN_GEN_STEP= = = = = CP"
"CL_RSTRAN_GEN_STEP= = = = = CM005"
"GET_CONTAINER"
My system support pack is 15. I searched many OSS Notes but i am not able to get the exact soln.
can anybody help me out with this problem?
Regards,
Harsh

this error is generally due to inconsistency in metadata
refer OSS note: 1071255, 1094266, 998730, 829353, 926854
Try to implement this solution from OSS 998730:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID   = 'space'
GROUPTYPE = 'space' or 'S'
REF_RULE <> 'space'
If there are inconsistent entries in the RSTRANRULE table such as:
           TRANID        *
OBJVERS        *
RULEID        *
SEQNR          *
GROUPID        00
GROUPTYPE      space or GROUPTYPE    'S'
RULETYPE      space
REF RULE       *
Delete these entries from the table.
Activate the affected transformations.
Edited by: sam hennry on Feb 5, 2008 4:40 PM

Short dump OBJECTS_OBJREF_NOT_ASSIGNED when activating infoobjects

Hi Experts,
We are getting a short dump when activating bussiness content infoobject which contain attributes, for e.g. 0COSTCENTER.
We are not getting the same dump when activating infoobjects whith out attributes.
We found a note 1019055 that recomends install sp13 or install six or seven notes for an emergency issue.
The problem is that if we install sp13 we will get out of stack.
What is your recomendation in this case? we are afraid that the problems will continue until we don't implement the sp13.
Thanks!

use t-code SNOTE to implement the OSS note you mentioned ,if it doesnt work you can always revert back to old status by doing Reset.
Hope it Helps
Chetan
@CP..

Dump when changing the value for a field (of 13 decimals) in alv grid.

Hi Group,
Its giving a dump when user is trying to change the value.
dump description: Unable to interpret "70,000 " as a number.
what is happening here is, the original value is 50,000 and he is deleting 5 and replacing it with 7, here its throwing the dump.
If he removes the complete number 50,000 and then gives 70000 its taking the value.
I tried to use, the decimals options in alv field catalog but to no joy.
Please can you give me an advice on this.
Many Thanks.

the problem is the comma in the 70,000....that's an alpha character.... Normally, we expect SAP to display numeric fields in a appropriate format, based upon their numeric type, but trying to forcibly insert '70,000' into a true numeric-type field can generate an 'unable to interpret xxx,xxxx as number' error.
You could experiment with changing your ALV column to a char17 (or appropriate width) and putting your numeric value into that to display, then converting back to type P, or other field type in the table, in a column that is not displayed, when the user changes the value.... essentially two columns, one not displayed with a routine to copy/convert the numeric field into the alpha field and the reverse when the field is changed.
But, the better solution is probably for the user to understand that they're seeing a formatted numeric field, and that they need to replace the entire value with the only possible punctuation being a decimal and (if necessary) a negative sign.

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Short dump when executing the query

Hello Friends,
I have a query from MM area which I have insalled from Business Content , and when I try to go to the edit mode or try to excute the query I get a short dump which says "Missing elements ..", I get the same dump when executing from query designer or RSRT . At this time I'm not able to do a "check" on the query also n query designer since it doesnot allow me to go to the edit mode also . Any inputs greatly appreciated .
thanks ,

Hi,
While activating it from the Business Content, have you activated all the underlying objects also. Pls check that. It might help.

Short dump during activating the BC Set in SCPR20 - "GETWA_NOT_ASSIGNED"

Hi experts,
We have upgraded from SRM 4 to 7.0.We are facing an issue when activating the BC Set in SCPR20. A short dump is occuring inside the program 'VIRSA/SAPLZVIR'. We got the solution that some correction instructions mentioned in the SAP Note 1095700 needs to be mplemented. The steps mentioned in the Note are,
1) Run transaction SE54 and click the button 'Edit Function Group'.
2) Next, enter the name of the function group /VIRSA/ZVR1.
3) Select the radio button option 'Re-generate group-specific programs',and press the 'Change' button.
4) In the following popup please mark only the option 'structure spec.data declaration renewal' and press enter.
We were able to proceed with the first two steps but stuck up during the execution of step3. When we selected the radio button u2018Re-generate group-specific programsu2019 and when clicked on the change button, we are getting a message like u2018the name space u2018/VIRSA/ZVR1u2019 does not exists. Because of this we are not able to proceed with the last step.
Kindly provide some ponters as of how to overcome this issue ..
Thanks in advance,
Dhan

Hi there,
To overcome this error you need to go to se06 and make the "/VIRSA/" namespace as Modifiable.
Also, you should have a look at the following note if my first suggestion doesn't work.
1041089 Tx SCPR20: GETWA_NOT_ASSIGNED dump during BC Set activation
Hope this helps.
Kind Regards,
Matthew

Getting dump when using do_sum in alv field cat in the output of the report

Dear Freinds,
             Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-outputlen   = 15.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
     call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
latha

Dear Chandu,
my code iam giving in details
types : begin of ty_output_data,
        staffno     type pernr_d,
        staffname   type emnam,
        grade       type stell,
        orgunit     type orgeh,
        orgtext     type hr_mcstext,
        psgroup     type trfgr,      " Pay Scale Group
        salary      type maxbt,       "PAD_AMT7S,
        rrefunded   type pad_amt7s,
        leavepay    type pad_amt7s,
        mshortfal   type pad_amt7s,   " Medical Shortfall
        echkshfal   type pad_amt7s,   " Execute checkup shortfall
        ofindeduc   type pad_amt7s,   " Other Finance Deduction
        mtyprem     type pad_amt7s,   " maternity premium
        vpbonus     type pad_amt7s,   " VP/Bonus
        gratuity    type pad_amt7s,   " Gratuity
        vpay        type pad_amt7s,   " Variable pay
        mallowance type pad_amt7s,   " Meal Allowance
        overtime    type pad_amt7s,   " overtime
        other       type pad_amt7s, " OTHER
        pfundeecon type pad_amt7s,   " PFund Employee's Contribution
        banktrnsfer type pad_amt7s,   " Bank Transfer
        count       type i,
        end of ty_output_data.
data : i_final         type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using   fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx      type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
    delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
endif.
endform.                    " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 5.
ls_fieldcat-fieldname    = 'STAFFNAME'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
   clear ls_fieldcat.
ls_fieldcat-col_pos      = 4.
ls_fieldcat-fieldname    = 'STAFFNO'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 6.
ls_fieldcat-fieldname    = 'GRADE'.
ls_fieldcat-seltext_l    = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-fieldname    = 'COUNT'.
ls_fieldcat-seltext_l    = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
    l_wa_fieldcat-do_sum    = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 7.
ls_fieldcat-outputlen   = 20.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 9.
ls_fieldcat-fieldname    = 'LEAVEPAY'.
ls_fieldcat-seltext_l    = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 10.
ls_fieldcat-fieldname    = 'MSHORTFAL'.
ls_fieldcat-seltext_l    = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 11.
ls_fieldcat-fieldname    = 'ECHKSHFAL'.
ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 12.
ls_fieldcat-fieldname    = 'OFINDEDUC'.
ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 13.
ls_fieldcat-fieldname    = 'MTYPREM'.
ls_fieldcat-seltext_l    = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 14.
ls_fieldcat-fieldname    = 'VPBONUS'.
ls_fieldcat-seltext_l    = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 15.
ls_fieldcat-fieldname    = 'GRATUITY'.
ls_fieldcat-seltext_l    = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 16.
ls_fieldcat-fieldname    = 'VPAY'.
ls_fieldcat-seltext_l    = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 17.
ls_fieldcat-fieldname    = 'MALLOWANCE'.
ls_fieldcat-seltext_l    = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 18.
ls_fieldcat-fieldname    = 'OVERTIME'.
ls_fieldcat-seltext_l    = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
    clear ls_fieldcat.
ls_fieldcat-col_pos      = 19.
ls_fieldcat-fieldname    = 'OTHER'.
ls_fieldcat-seltext_l    = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos      = 20.
ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 21.
ls_fieldcat-fieldname    = 'BANKTRNSFER'.
ls_fieldcat-seltext_l    = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform.                    " st_fieldcat_init
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
      FORM TOP_OF_PAGE                                              *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary = l_i_detailheader.
endform.                    "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header       type slis_listheader,
        l_v_time         type slis_edit_mask,
        l_v_date         type slis_edit_mask,
        l_v_abkrs        type char5,
        l_v_pabrj        type char8,
        l_v_pagno        type char10.
Local Constants
constants: l_c_h type char1 value 'H',
             l_c_1 type i     value '1',
             l_c_edit type char10 value '__.__.____',
             l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno =   sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
              l_c_slash
              l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011.                " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform.                    " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA.

I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy.

I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy. I was not able to restart, I was not able to switch users, I was not able to shut down. I decided to manually shut down my Mac. when it booted back up I was looking at the disk utility screen. When I clicked on repair or race it indicated that my hard drive had already been arranged. I was looking at completely formatted drive and I was having to either restore from Time Machine or reinstall lion. I had a back up but why did this happen?

A possible workaround could be to have the horizontal scroll bar visible all the time.
<pre><nowiki>body { overflow-x: scroll !important; }</nowiki></pre>
* Stylish: https://addons.mozilla.org/firefox/addon/stylish/

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Error when activating the BEx history

Hi,
When I am trying to activate the BEx history through transaction 'RS_PERS_ACTIVATE', I am getting the error saying 'Activation of BEx History failed'. Then when I checked the DSO '0PERS_BOD' it is inactive also the corresponding table '/BI0/APERS_BOD00' not exists in data dictionary table. Because of this I am getting Error message while opening the BEx analyzer saying 'serious error occured while reading history folder'. So kindly suggest me in making the DSO '0PERS_BOD' active. I hope this will solve the problem.
Thanks in advance,
Steve.

Hi,
'Version A of DataStore object 0PERS_BOD does not exist' is not the estimate message.
1. RSA1
2. BI Content
3. Object types
4. grouping -> only necessary objects
5. data store object -> select object
6. search to "0pers_"
7. mark "0PERS_BOD", "0PERS_VAR" and "0PERS_WTE" -> Transfer Selection
8. Install
Sven

DUMP when activating an Infsource or accesing the Scheduler

Similar Messages

Maybe you are looking for