Dump when I activate a transformation with a formula.
Hi All,
I 've different problems with transformations....
Particulary when I activate a transformation with a formula, it terminates in dump with exception "ASSERTION_FAILED" in class CL_RSRAN_FOBU_APPL method GET_CODE.
I' ve read the note 1050275 (ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE) that seems to have the solution for this problem, but the correction instruction proposed is already applied and the problem still running...
Infact the note suggest to apply the support package SAPKW70014...and I've SAP_BW 700 with SAPKW70015.
I've also read the note 1055217 and 998730, but I'm not able to find the right solution.
How I can solve the problem?
Thank's a lot,
Valentina.
Hello Valentina,
does this happen with all Transformations, or only with once into the DSOs or InfoCubes.
If only into the above mentioned target I have a possible solution for you.
I had a similar problem recently, you are probably also working with some Master Data Update. The InfoObjects that you are updating into the DSO or InfoCubes are being updated(With Master Data Transformaion) with Master Data as well, these need to be active, otherwise the check goes into the following tables(please see below) and if there are inconsistences it ends with "ASSERTION_FAILED".
These the relevant tables for Routines and Formulas, please check them as well:
Formulas are maitained in the follwing tbls:
RSAFORM
RSAFORMMAP
RSAFORMT
RSFOBUEV000
RSFOBUEV001
Routines:
RSAABAP
RSAABAPINV
RSARFIELDS
RSAROUT
RSAROUTT
Hope this helps a bit.
Kind Regards,
Patrik Hengerics
Similar Messages
-
Short Dump when trying to display transformations.
hello Experts,
When I am trying to display the rule details in the transformations i am facing the follwing shortdump messages. I just want to see the rooutine in the rule details of the transformation.Could you please help me to resolve this issue.
"MESSAGE_TYPE_X" " "
"CL_RSTRAN_STEP_ROUT===========CP" or "CL_RSTRAN_STEP_ROUT===========CM008"
"MAINTAIN_ROUT"
Regards,Step 1: After u see the error message when you open the transformation, try TC su53. This will tell you if you are missing any authorization.
Step2 : If everything is fine! Is your Tran 'deactivated' id 'white' in color ? Activate you source n target again & try to open the TRAN -
SYSTEM_NO_ROLL dump when trying to precalculate data with RSRD_BROADCAST_PR
Dear all,
At my present customer we are facing a problem when doing a precalculate of data with RSRD_BROADCAST_PROCESSOR.
The dump message is:
Runtime Errors SYSTEM_NO_ROLL
Date and Time 20.08.2008 3:20:54
Short text
Unable to fulfil request for 1082885568 bytes of memory space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
More main memory area was requested.
However, all the available space has been used up.
Possible reasons:
#NAAM?
#NAAM?
#NAAM?
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server sapbwp00_PB1_00 on host sapbwp00 (wp 40)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1881
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
Try to decide by analysis whether this request is
reasonable or whether there is a program error. You should pay
particular attention to the internal table entries listed below.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
SYSTEM_NO_ROLL " "
CL_ABAP_CONV_OUT_CE===========CP or "CL_ABAP_CONV_OUT_CE===========CM003"
WRITE
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapbwp00"
Network address...... "10.91.1.85"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 40
Shortdump setting.... "full"
Database server... "csu123"
Database type..... "ORACLE"
Database name..... "PB1"
Database user ID.. "SAPPB1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jan 23 2008 23:12:46"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 144
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 8782704
EM...... 5091782384
Heap.... 2968385120
Page.... 49152
MM Used. 6350628336
MM Free. 1717574096
User and Transaction
Client.............. 400
User................ "*********"
Language key........ "N"
Transaction......... " "
Transactions ID..... "48AB1576041B51CCE10000000A5B0155"
Program............. "CL_ABAP_CONV_OUT_CE===========CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_ABAP_CONV_OUT_CE===========CP" -
in "WRITE".
The main program was "RSRD_BROADCAST_PROCESSOR ".
In the source code you have the termination point in line 5
of the (Include) program "CL_ABAP_CONV_OUT_CE===========CM003".
The program "CL_ABAP_CONV_OUT_CE===========CP" was started as a background job.
Job Name....... "BIBCAST4AVN2YK4QXLZWI2MO0ZD5OD3P"
Job Initiator.. "********"
Job Number..... 02000600
Source Code Extract
Line SourceCde
1 METHOD write.
2
3 IF view IS INITIAL.
4 * Single field
>>>>> SYSTEM-CALL CONVERT ID 24
6 " EXPORTING
7 DATA data
8 ENDIAN me->endian
9 IGNORE_CERR me->ignore_cerr
10 N n
11 " IMPORTING
12 LEN len
13 " CHANGING
14 CINFO me->cinfo
15 BUFFER me->buffer.
16 ELSE.
17 * Structure
18 DATA:
19 viewstr TYPE xstring.
20 viewstr = view->get_view( ).
21
22 SYSTEM-CALL CONVERT ID 25
23 " EXPORTING
24 DATA data
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 4
SY-DBCNT 2
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Broadcasting Framework: doorgegeven instellingen uitvoeren
SY-MSGTY S
SY-MSGID RSRB1
SY-MSGNO 803
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080820
SY-UZEIT 24659
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
9 METHOD CL_ABAP_CONV_OUT_CE===========CP CL_ABAP_CONV_OUT_CE===========CM003 5
CL_ABAP_CONV_OUT_CE=>WRITE
8 METHOD CL_RSRD_UTILITIES=============CP CL_RSRD_UTILITIES=============CM006 8
CL_RSRD_UTILITIES=>CONVERT_STRING_TO_XSTRING
7 METHOD CL_RSRD_DISTRIBUTOR_MAIL======CP CL_RSRD_DISTRIBUTOR_MAIL======CM002 30
CL_RSRD_DISTRIBUTOR_MAIL=>SET_BODY
6 METHOD CL_RSRD_DISTRIBUTOR_MAIL======CP CL_RSRD_DISTRIBUTOR_MAIL======CM004 43
CL_RSRD_DISTRIBUTOR_MAIL=>IF_RSRD_F_DISTRIBUTOR_RT~DISTRIBUTE
5 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 123
CL_RSRD_SETTING=>EXECUTE_NODES
4 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 144
CL_RSRD_SETTING=>EXECUTE_NODES
3 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 144
CL_RSRD_SETTING=>EXECUTE_NODES
2 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM002 108
CL_RSRD_SETTING=>EXECUTE
1 EVENT RSRD_BROADCAST_PROCESSOR RSRD_BROADCAST_PROCESSOR 180
START-OF-SELECTION
Chosen variables
Name
Val.
No. 9 Ty. METHOD
Name CL_ABAP_CONV_OUT_CE=>WRITE
N
-1
FFFF
FFFF
DATA
MIME-Version: 1.0##Content-Type: multipart/related;## boundary="=_48AB15C6041B51CCE10000000A5B
0
0
4,44426E+93
D9D5D65239FEA01E0DA3FE45E4D4905A0D5C490124F25C1454BDA02F5E4129D2DF4812153604125133510000000152
VIEW
F0000000
F0000000
LEN
0
0
0
%_SPACE
0
0
2
0
SYST-REPID
CL_ABAP_CONV_OUT_CE===========CP
0
0
4,45445E+39
3CF1210F3FE6FF54F35DDDDDDDDDDD3000000000
%_DUMMY$$
0
0
2222
0
RSJOBINFO
00000000000000 ##
0
0
2,22222E+81
0
ME->BUFFER
ME->ENDIAN
0
0
2
0
ME->IGNORE_CERR
0
0
2
0
ME->CINFO
##41024110#Ā####################ā##¨M퇀##罿N##0000############## ### ###0000#0000#########怀### #
0000000000000000000000000000000000000D00700000000000000000000000002000000000000000000000600020
0000000000010000000000000000000010000100F00000000000000000000000000000000000000000000000000000
00333333332000000000000000000001000A4C00740033330000000000000020000000333303333002000002000000
014102411030000001000001010100081008D000FE0000000D000C000D000D00020001000000000003000003010001
SY-XFORM
CONVERSION_EXIT
0
0
4,44546E+29
3FE65239FEF5894000000000000000
VIEWSTR
ME->POSITION
0
0
0
No. 8 Ty. METHOD
Name CL_RSRD_UTILITIES=>CONVERT_STRING_TO_XSTRING
I_STRING
MIME-Version: 1.0##Content-Type: multipart/related;## boundary="=_48AB15C6041B51CCE10000000A5B
0
0
4,44426E+93
D9D5D65239FEA01E0DA3FE45E4D4905A0D5C490124F25C1454BDA02F5E4129D2DF4812153604125133510000000152
R_XSTRING
SY-REPID
CL_RSRD_UTILITIES=============CP
0
0
4,45555E+39
3CF2324F549C94953DDDDDDDDDDDDD3000000000
%_DUMMY$$
0
0
2222
0
SYST-REPID
CL_RSRD_UTILITIES=============CP
0
0
4,45555E+39
3CF2324F549C94953DDDDDDDDDDDDD3000000000
LO_CONVERT_OUT
90000006
0000002F
%_SPACE
0
0
2
0
SYST
#######################################H#########ÿ#############################T###ÿ###ฐXu#̀##
0
0,00E+00
0000000000000000000000000000000000000004000000000F000000000000000000000000000105000F0001570000
0000040800000000000002010100010000000008000000000F000000000000000000000000000604000F000085000C
No. 7 Ty. METHOD
Name CL_RSRD_DISTRIBUTOR_MAIL=>SET_BODY
SYST-REPID
CL_RSRD_DISTRIBUTOR_MAIL======CP
0
0
4,45555E+39
3CF2324F493429254F2FD19CDDDDDD3000000000
ME->O_R_PARAMETER
80000007
F0000020
ME->IF_RSRD_F_DESIGN_TIME~C_PARAMETER_TYPE_TEXT
DI_BODY
0
0
4,45445E+29
49F2F4900000000000000000000000
L_BODY
%_DUMMY$$
0
0
2222
0
ME->IF_RSRD_F_DESIGN_TIME~C_PARAMETER_TYPE_PCD_FOLDER
DI_IMPORTANCE
0
0
4,45445E+29
49F9D0F241E3500000000000000000
L_IMPORTANCE
MEDIUM
0
0
444454
D5495D
SY-REPID
CL_RSRD_DISTRIBUTOR_MAIL======CP
0
0
4,45555E+39
3CF2324F493429254F2FD19CDDDDDD3000000000
ME->O_SX_DOCUMENT+148(256)
multipart/related
0
0
6,76768E+93
D5C490124F25C145400000000000000000000000000000000000000000000000000000000000000000000000000000
ME->O_SX_DOCUMENT+440(8)
Table IT_77861199[0x296]
DATA=O_SX_DOCUMENT-T_MIMES
Table reference: 2400542&nHi,
Take help of your basis team to extend the Memory allocation for this Job
or you need to Restrict the Information that you are Broadcasting
I mean some more restrictions in the report to reduce the Data Size for brodcasting
Assigning the Points is the way to say thanks in SDN if helpful
Regards
Hari -
Dump when displaying target group
Hi,
When I try to display a target group I get this error:
Line types of an internal table and a work area not compatible
The problem is that in method SELECT_BP_ENHANCEMENTS from class CL_DEF_IM_CRM_MKTTG_SEG_MEM_EX, the method tries to insert a line of linetype crmt_mkttg_member_guid into an internal table with type BUPA_DATA_ALL.
This dump occurs since we upgraded to ehp2 sp10.
Anyone who had the same problem or knows how to fix this?
Kind regards,
R.W.Hi Robbe,
maybe this note will solve your problem:
1937689 - Dump when opening a target group with out
relationship
Kind regards -
ASSERTION_FAILED short dump when Transporting Transformation from Dev to QA
Hi Experts,
I' am getting a short Dump when transporting the transformations, DSO & DTPs from Dev server to QA.
I got RC=12, Please have a look below....
Transport log...
BCQ System BCQ
Selection for Import 08.07.2010 15:28:59 (0) Successfully Completed
Import 08.07.2010 15:35:14 (0) Successfully Completed
Check Versions 08.07.2010 15:35:14 (0) Successfully Completed
Method Execution 08.07.2010 15:36:20 (12) Canceled
Import 08.07.2010 15:45:39 (0) Successfully Completed
Check Versions 08.07.2010 15:45:39 (0) Successfully Completed
Method Execution 08.07.2010 15:46:45 (12) Canceled
and the Log detalis.....
Date Time Message
08.07.2010 15:35:15 Job started
08.07.2010 15:35:15 Step 001 started (program RDDEXECL, variant , user ID DDIC)
08.07.2010 15:35:15 All DB buffers of application server sxcat136 were synchronized
08.07.2010 15:35:21 STDO: Log could not be written on output device T
08.07.2010 15:35:30 Replication completed successfully
08.07.2010 15:35:31 Struttura di comunicazione /BIC/CS8ZFIZIASA activated
08.07.2010 15:35:40 Regola(e) di trasm. 8ZFIZIASA_AA activated
08.07.2010 15:35:47 ABAP/4 processor: ASSERTION_FAILED
08.07.2010 15:35:47 Job cancelled
Even I've checked the entries on the table RSTRANRULE for those Transpormations but there I got...all the entries with...
RULEID = all numbers
GROUPID = '1' or '2'
GROUPTYPE = 'S' or 'T'
REF_RULE ='0'
we are in to SAP_BW Release 700, Level 0013, SP -SAPKW70013, SAP NetWeaver BI 7.0
Pls help if any one know's the solution for this.
Thanks in adv.
BR,
Ajay Kumar
Edited by: sap.ajaykumar on Jul 9, 2010 12:48 PMFollow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Also check the oSS note : Note 975675 - Transformation cannot be activated -
I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I have reset my iPhone 5 and now it is asking me to activate my phone with my apple ID but when i put in my details in its say the my email address cannot be used to unlock my iPhone? help!
You need the Apple ID and password from the previous owner who set the Activation Lock. Where did you get this phone?
iCloud: Find My iPhone Activation Lock in iOS 7
Find My iPhone Activation Lock: Removing a device from a previous owner’s account -
I recently moved to Australia and received a new iphone with a local AUS number. I have a backup of my US iphone in the icloud. Question: when I activate my new AUS iphone which option should I choose - new phone or restore from backup? I would like to have all my contacts, email, etc. however wasn't sure that option was appropriate since it is a different/new number and a new phone.
Yes, as new iPhone then restore from backup.
-
Transport Error when including Transformations with Formulas
I am attempting to transport a transformation that includes formulas. I am getting an ASSERTION_FAILED short dump and my transport stops with an Error Code = 12. Transformations without formulas or with routines seem to go ok.
Here is a piece of the short dump:
Information on where terminated
Termination occurred in the ABAP program "CL_RSTRAN_RSFO================CP" -
in "COPY_ON_DATABASE".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 51
of the (Include) program "CL_RSTRAN_RSFO================CM01U".
The program "CL_RSTRAN_RSFO================CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 15091300
We are currently on NW2004s SP10. I cannot seem to find any OSS notes that are applicable? Anyone have any help?We had to log an OSS Message with SAP to get this fixed. Somewhere in the development of the transformation, the rules with the formula got corrupted, even though it did not appear to be corrupted from the front-end.
Here is the text from the OSS Message:
The problem is that the yuo defined 2 formulas for this
transformation but in table RSTRANSTEPROUT there are 3 active
entries. RULEID 4 is wrong, because this ruleid
is not avialable in table RSTRANFIELD and RSTRANRULE. To delete
an inconsistent ruleid you can use the procedure which is
described in note 983036.
Once we cleaned this up, the transformation transported successfully.
Hope this helps! -
Transport error when transporting a transformation with formulas/routines
Hi All,
I have migrated some 3.5 dataflow (Datasource, Transfer rules, Update rules, Infosource etc..) to 7.0. I am able to load the datatargets using the DTP's just fine.
The problem I am facing is transporting these dataflows to Quality and Production systems. I am specifically having problem with transporting transformations which has formulas/routines.
I was able to transport the transformations with direct mapping from source field to target fields (no formulas/routines) without any problem and it works fine in Quality system. I tried to transport couple of transformations with formulas/routines, all of them give a shortdump ASSERTION_FAILED (transport fails with error code 12).
I am not sure what the problem is. We are on support package 16. Has anyone faced this problem before? Any suggestions are appreciated.
Points are assured
Thanks,
Sirish.Hi,
What is the dump message you are getting? Check in ST22 and let us know. And try the process which is said in the previous post collect all the transformations through transport connections and transport them.
Khaja -
How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.
You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg -
i have a problem with my iphone 4s voiceover. when i activate it i only hear the voice comman bt can't see anything.
Plz...give me your best advice so i can correct my problem thank much.You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
How to activate a transformation
I want to activate the transformations in BI 7.0 using a program . is there any program to do as we have program RS_TRANSTRU_ACTIVATE_ALL in 3.X systems to activate transfer rules ..I want to do this bcoz I am getting a short dump when I am trying to open a transformation
thanksHi,
There is no stadard program for activating transformation in BI 7.0.
You are getting a dump when opening a Transformation means there is some inconsistencies cuased in the tables for the transformation.
There are few problems with Transformation up to SP15.
I would suggets to raise a OSS message to SAP, or create a new transformtiaon if possible.
Regards,
Nitin -
ERP EHP4 causing dump when posting invoice in MIRO
I originally posted this in the MM forum but was advised to move it here.
We just implemented ERP EhP4 w/SAPAPPL603 and are now getting a dump when using MIRO to posting a vendor invoice against a PO. The error seems to involve new logic for multiple account assignment introduced with this EHP. The dump is in include LMRMBWF02 of SAPLMRMBM, and indicates that data object S_MCRBPO does not contain component XHISTMA. The lines in LMRMBWF02 are (starting at 772):
FORM bw_read_co_history_dyn_sub USING event TYPE bwmode
s_index_mcrbpo TYPE eval_iv_index_key_s
s_mcrbpo TYPE mcrbitm
CHANGING s_mcrbco TYPE mcrbco.
DATA: s_ekbe LIKE ekbe,
s_ekbz LIKE ekbz,
s_ekbz_ma TYPE ekbz_ma, "MAA EhP4
s_ekbe_ma TYPE ekbe_ma, "MAA EhP4
f_arewr TYPE ekbz-arewr, "MAA EhP4
f_areww TYPE ekbz-areww. "MAA EhP4
CASE event.
WHEN c_recompilation.
IF s_mcrbco-xunpl = space.
Not for unplanned account assignments
IF ( s_mcrbpo-exkbe = 'X' ).
Read PO history for goods item
IF s_mcrbpo-xhistma = space. "MAA EhP4
...with the last line being the culprit. The actual break in execution occurs at line 119 of SAPLMRMP, BESTELLUNG_BUCHEN where function MRM_BW_PO_HISTORY is called.
Had some other errors where tables weren't properly activated after the EHP installation, but here most everything seems to be activated properly. The exception is table EKBE, which activates but with warnings about missing enhancement categories of tables or includes/subtypes for four active dependent tables. That's the only lead I've got.
Can't find any notes or other posts about this error, any ideas would be greatly appreciated!Hi,
the only thing i´ve found is this OSS Note:
https://service.sap.com/sap/support/notes/1105679
Best regards. -
Error when opening the Standard Transformation
Hi All,
I have made changes to DSO by adding an Info Object which is a part of Business Content(SRM) and transported it. But i forgot to activate the transfromations which are above the DSO and DSO provides data to 4 other Info Providers. So the Tranport Req failed.
So i started activating each one of the 4 transformations and thought of transporting them again. In one of the transformation, while i am trying to open it, there was one error which is getting generated :
Update Rules : Display Start
Info Object is not contained in the Info Cube.
SO the transformation is not getting displayed.
Again i checked out in production, but same with that too. Now the problem is the transformation is inactive and when i transport that the transformation in production also gets inactive, which will bring me more problems.
can anyone suggest me how to activate the transformation?
The Transformation is in a part of business content which is between DSO and Cube
DSO-0BBP_SC
CUBE-0SR_C01
Thank You,
Poornima.Hi Martin,
Thanks a lot for the response. But the problem is with the transformation which went inactive with the change in DSO.
I tried activating it. but the error is getting generated and a pop uo screen comes saying
Update Rules : display Start:
Info object is not containd in th Infocube.
The same erro exist in Quality and Production, but the transformation is active there and data is being loaded into cube from DSO daily.
When i transport this transformation without activating it, then the same will reflect in Quality and Production.
IS there any way for the transformation to be activated?
Thank You,
Poornima.
Maybe you are looking for
-
***Error while creating tne applications in Essbase***
Hi all, We are getting the following error while creating the applications in Essbase console ( we are using Oracle EPM 11.1.1.2 on vmware 2003 server). Error: 1056603 Unable to spawn process for application. Please ensure that adequate memory is ava
-
Att.my.yahoo mail no longer works right through Firefox.
''locking as a duplicate - https://support.mozilla.com/en-US/questions/856290'' I use '''att.my.yahoo.com''' to access several e-mail accounts. Recently (perhaps about the time I upgraded to Firefox 5 or 5.0.1), I started having trouble after going t
-
I am considering using the supplier item catalog in core purchasing. I am aware that when you search for an item in the supplier item catalog it returns items from various sources. My question is: will it only return system items? or does it return a
-
I need to put two partially-overlapped JButton on a window, but I don't find the method nor the property that changes the Z-Order (the order of objects' overlap) of the object. How can I do?
-
I recntly purchased an Imac and had a data transfer from a circa 2007 Imac. I can't remember by admin password to allow software downloads etc.