Dump when i exit Service master from PO

Guys,
I got a dump, when i display service master from PO and exit back to PO again. I hope there should be some Notes, but i couldnt find any. We are in 4.7 SP 33, let me know if you find any or suggestions pls.
Regards
TGB

Hi,
If we experience dump then we may look into the error details in ST22 and SM13.
Dump may be becaue of 1) data inconsistency ex:number range issue, 2) Any version changes happened 3)Any recent abap changes not incorporated like that,
Try to search the notes based on the error details and still you cant able to find out the issue then definitely need to locate with the help of abaper by debugging.
Regards,
BK

Similar Messages

GETWA_NOT_ASSIGNED short dump when load business partner master data

Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.

Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Short Dump When Installing Key Figure Catalog from BI Content

Hi Friends,
I get a Short dump when trying to Install a Key Figure Catalog (in Purchasing) from the BI content. This is what the Error Says ,
" You Attempted to Use a "NULL" object reference (Points to nothing) access a component (variable : " "). An Object reference must point to an object (an instance of class ) before it can be used to access components.
Any input will be greatly appreciated,

Hi Michal,
this bug hits only patch level 201 of the DBSL. Please update the DBSl.
Regarding the ABAP code I do not believe that the hint helps in this case but it should not cause any problems either. If this hint is applied more PREPARE calls are neccessary since before every execution a new statement text is assembled.
The advantage of SUBSTITUTE_VALUES hints is that the database optimizer get more information through the statement text. The downside is that a new statement is generated every time. E.g. you won't find the statement as a top scorer in a SQL cache analysis if the access plan is still bad.
Regards
Frank

Dumps when trying to Maintain master data

Hi All,
When we are trying to Maintain master data for a master data object 0WBS_ELEMT, we are getting a short dump "CALL_FUNCTION_NOT_FOUND" in our BI 7.0 system.
What we are doing is Right click on 0WBS_ELEMT info object and Maintain master data, then we get the above dump. Saw in one of the forums that by making the info object in active and activating it again it will solve the issue but even after doing this the issue still persists, we still get the dump. Would need help from all of you.
regards,
Suman Pitta

Hi Suman,
The dump is due to the fact that 0WBS_ELEMT has an attribute which still
uses the POSID conversion exit. Attribute 0PROG_POS should use
conversion exit POSBW. And in fact, in RSD1 of this infoobject, POSID is
Still maintained. However, if you go to the DDIC object in SE11
(SE11 -> choose "Domain" -> /BI0/OPROG_POS -> Display), you will
see that the conversion routine POSID still appears. This is the reason
you get the dump.
In order to resolve this issue, go to RSD1 -> enter infoobject
'0PROG_POS' -> choose maintain -> Set object status to inactive and
reactivate the InfoObject. The reactivation should regenerate the DDIC
objects (you can check this in SE11 again).
Alternatively change to the version from content which utilises POSBW
already.
regards,
Colin

Error when running Web Service Proxy from JDev (running publisher report)

Hello.
I would like to call publisher report from forms, so i was using this instructions:
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v21.pdf
When i test my Web Service Proxy, i get this warning:
WARNING: The received SOAP fault contains non standard fault element: "{http://xml.apache.org/axis/}hostname". This element will be ignored.
javax.xml.rpc.soap.SOAPFaultException: oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.apps.xdo.servlet.CreateException: Report definition not found:/Path/Employees.xdo
at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:555)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
at bip_webservice.proxy.runtime.PublicReportServiceSoapBinding_Stub.runReport(PublicReportServiceSoapBinding_Stub.java:290)
at bip_webservice.proxy.PublicReportServiceClient.runReport(PublicReportServiceClient.java:105)
at bip_webservice.proxy.PublicReportServiceClient.main(PublicReportServiceClient.java:79)
What is wrong? Did anyone try those instructions?
Thanks.

I am getting the same error. What was the solution that worked for you? Please help

Assertion Failed - Dump when clicking on the links from Portal for WD Comp

Hi,
We have a WD Component which is integrated to the Portal . When we click on the link in the Portal for the first 2 times, the selection screen is shown correctly ( when debugged, the program stops in WDDOINIT method before the sel.screen is shown).
When we click on the link for the third or fourth time with no time gap, it shows a dump. This is the dump I am getting.
Runtime Errors         ASSERTION_FAILED
Date and Time          01/06/2011 10:13:58
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_NW7_VIEW_ELEMENT_ADAPTER===CP" or "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004"
"DISPATCH_NW7_EVENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 010
User................ "STECURRY"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4D250E9ADDFB00BDE10080000A041004"
Program............. "CL_NW7_VIEW_ELEMENT_ADAPTER===CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTPS" Connection:
Plug-in Type.......... "HTTPS"
Caller IP............. "10.6.4.220"
Caller Port........... 443
Universal Resource Id. "/sap/bc/webdynpro/sap/ZEM_INV_APP_ASSIGNMENTS/"
Information on where terminated
Termination occurred in the ABAP program "CL_NW7_VIEW_ELEMENT_ADAPTER===CP" -
in "DISPATCH_NW7_EVENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 5
of the (Include) program "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004".
Source Code Extract
Line
SourceCde
1
METHOD dispatch_nw7_event.
2
DATA: l_event_handler TYPE REF TO if_wdr_nw7_event_handler.
3
4
l_event_handler = get_nw7_event_handler( i_event_handler_id ).
>>>>>
assert l_event_handler is not initial.
6
7
" View-based Delta Rendering: tracking of client events
8
raise event on_nw7_handle_event
9
exporting
10
event_handler = l_event_handler
11
event_name    = i_event_name.
12
13
14
l_event_handler->handle_event(
15
i_event_name       = i_event_name
16
i_event_parameters = i_event_parameters
17
i_update_data      = i_update_data
18
i_event_queue      = i_event_queue ).
19
ENDMETHOD.
- I have cut the dump to make it short and clear.
One of my colleague ran a HTTP watch trace and I am attaching it as well.
<body> <table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td> <h1> Error when processing your request </h1> <br> <h2> What has happened? </h2> <p> The URL https://uswasspq.deloitte.com:/sap/bc/webdynpro/sap/ZEM_INV_APPROVER_MAIN//ucfLOADING was not called due to an error. </p> </td> </tr> <tr> <td> </td> </tr> <tr> <td class="emphasize"> <strong> Note </strong> <br> <ul> <li> The following error text was processed in the system SPQ : <b> User session (HTTP/SMTP/..) closed after timeout </b> </li> </ul> <ul> <li> The error occurred on the application server usuxc204_SPQ_01 and in the work process 1 . </li> </ul> <ul> <li> The termination type was: ERROR_MESSAGE_STATE </li> </ul> <ul> <li> The ABAP call stack was: <br> Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP<BR>Method: IF_HTTP_EXTENSIONHANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP<BR>Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP<BR>Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME<BR>Module: %_HTTP_START of program SAPMHTTP<BR> </li> </ul> </td> </tr> <tr> <td> </td> </tr> <tr> <td> <p> </p> <h2> What can I do? </h2> <ul> <li> If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SPQ in transaction ST22. </li> </ul> <ul> <li> If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server usuxc204_SPQ_01 in transaction SM21. </li> </ul> <ul> <li> If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server usuxc204_SPQ_01 . In some situations, you may also need to analyze the trace files of other work processes. </li> </ul> <ul> <li> If you do not yet have a user ID, contact your system administrator. </li> </ul> <br/> <p class="note"> Error code: ICF-IE-https -c: 010 -u: STHUGHES -l: E -s: SPQ -i: usuxc204_SPQ_01 -w: 1 -d: 20110208 -t: 131808 -v: ERROR_MESSAGE_STATE -e: User session (HTTP/SMTP/..) closed after timeout </p> <br/> <p> HTTP 500 - Internal Server Error <br/> <p> Your SAP Internet Communication Framework Team </p> </td> </tr> </table> </body> </html>
After this error a URL is called form the WebDynpro to the following html page.
https://uswasspq.deloitte.com/sap/bc/webdynpro/sap/zem_inv_approver_main/dps_Error_Page.html ( this is the friendly message we have put so that the user does not see the dump on his screen.
I tried invalidating the nodes in the WDDOEXIT at the view level but it did not help. This is a show stopper for the project to go live.
Thanks,
Guru.

Hi Guru,
It is not readable the way you posted and that might be the reason that you do not get reactions.
Can you please confirm the following.
1. Is this problem occurs with out portal when you run the application standalone in SAP GUI.
2. What is going on wddoinit method or wddomodify method, any resource handling there ?

Occasional SOAP errors when making web service calls from C#

We have a C# application making web service calls to RFCs (non-NCO, SAP 4.7, WAS 6.40) and occasionally getting the following error:
The 'SOAP-ENV:Envelope' start tag on line '1' does not match the end tag of 'SOAP-ENV:Envel'. Line 1, position 34560.
This error happens randomly and can occur, not occur, and occur again for the exact same call (same data, same web service call). I anticipate that we might have a missing configuration on one of our application servers, but don't know where to tell BASIS to look. Any ideas or other help would be appreciated.

That's going to be difficult. The random nature of the error makes it impossible to reproduce (so far) in our Development and Test environments. Since the error is coming from the SAP side, I believe I would need a sniffer on each production application server in order to try to catch this and that would result in some very large log files. Is there any log file or other SAP transaction that might already be capturing these failures?

System dumps when i try to upgrade from any bootcamp version greater than 3.2 any solutions?

late 2009 quadcor i7 running mountain lion and win7 pro 64 bit. No multiple display adapters in the device manager and no hardware conflicts. I'm getting the blue screen of death system dump which won't even allow me to reboot in safemode.

Firefox 4+ versions aren't compatible with the Power PC architecture, they need an Intel chip.
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

Service Master Record - Clarification

Hi All,
I am creating Service master record.In which I have entered the material group so that system has taken the valuation class on it own as we have configured material group and valuation class link.
After I entering I come to know i have entered the wrong material group so have go ahead and chnaged the material group, but still valuation class has not changed, though it is linked to material group.
If we continue with the same val class then posting will happen to wrong GL.
How to avoid this?
Any reason why valuation class is not refreshed when the material group changed?
Requirement - we want val class to be changed(refreshed) whenever the material group changed.
Please can you help me out how to get this done.
Thanks in advance.
Regards,
Nagaraj S

Please refer below sap notes:-
SAP Note 305555 - MM-SRV:Valuation class f.service catgory not updatd for the same.
SAP Note 366741 - AC03: Valuation class not recognized as required entry field
Or check Screen Layout for Service Master from SPRO.Valuation class should be Input Field.
Regards,
Sandesh Sawant

Error during Replication of Service Contracts from CRM to ECC

Hi,
I'm encountering a problem when replicating a Service Contract from CRM (I'm using SAP CRM 2007) to ECC.
I insert a first Item which is not relevant for pricing (let say, product 123)
I Insert a second Item relevant for pricing, with reference to the previous one (let say, product 456)
I release the Items and I save the contract
When I try to go in edit mode in the Contract, an error appears:
An error has occured in the system DE1CLNT200 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
u2022     Material 0 does not exist in plant ZX01 / country CH (Notification E V1 391)
u2022     Error in SALES_ITEM_IN 000101 (Notification E V4 248)
u2022     Sales document was not changed (Notification E V4 219)
It seems that the program does not recognize the product (the error message says "Material 0", not "Material 456") ...
Any idea?
Thanks in advance,
Andrea

Should it be a problem related to the leading zeros?

Material/service master catalog upload (ECC-CCM)

SRM have 2 possible scenarios to upload the material master data to CCM:
1- Upload material master data from ECC to SRM and, after, from SRM to CCM.
2- Upload material master data directly from ECC to SRM.
Does anybody know the name of the transaction or report in ECC to upload the material/service master catalog directly to CCM?
Best regards,
Cristiano Soares

Hi All-
I have about 3 tricky questions concerning CCM-ECC Integration
1.) Does anybody have any idea on how to upload Material and Service master from ECC 6.0 directly into the CCM 2.0 system. Is there any standard program like we have in SRM called as BBP_CCM_TRANSFER_CATALOG. I
2.) Also are there any complications or is it possble to integrate CCM 2.0 directly from ME51n? I am aware that PM and PS out-of-the-box can be directly integrated to CCM. Is there a similar way to achieve this functionality. If yes can anybody give me some pointers on this.
3.) Are there any complications involved with uploading service masters and interfacing CCM to EBP or ECC and directly using the service master from CCM to create a Shopping cart (CCM-EBP) or a purchase requisition (CCM-ECC).
I hope some one can throw some light on these questions.
Suitable points will be rewarded for helpfull answers !!
Thanks,
Sundeep

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Transfer of Service master short text from PR to PO

Hi All,
We have a scenario where we use Generic service number to order one time services. Based on the requirement we keep on changing the short text (description) of the service master in PO or Purchasing requisition. The issue is - Short text on generic service master is changed in PR but it is keep on reverting to original short text as in service master while converting PR to PO. .
For Example :
Service master - Code - 100001 - Description - "Generic Corp Miscellaneous Services"
I created a PR, included service no 100001 and changed the description of short text to - "Fixing tiles at foyer". Now when I converted PR to Purchase order service description should transfer to PO. But it is showing as 'Generic Corp Miscellaneous Services'. After investigation I found it is coming from the Contract that is linked with the PR as source of supply. And if I removed the Contract from the source of supply short text transfers from PR to PO. So Contract get precedence over PR.
The requirement is - short text of service master should transfer from PR even when source of supply is Contract. It means always transfer short text from PR to PO not from contract. Is there any user exit/ config or change to ABAP code is required.
Any help is greatly appreciated.

Hi
If you have document management system active in your system and if it the document type of documnet (which you created in CV01N) has link object PO and PR. Surely it will be transafred from PO to PR. But if you have added document in service object in Me52N then it will never go to PO automatically.
Thanks and Regards
Antony

MM-SRV: Adopt Material Group from Service Master instead of default in SPRO

At my current client we are encountering a problem when creating requisitions for services. When the system was originally configured years ago, a default value for material group was entered in the IMG under:
Logistics > Materials Management > External Services Management > Source Determination and Default Values > For Client
Field is "Default material group at item level" (V_T165-MATKL)
Up to now this singular default value was fine because they only had one material group for services. They are now wanting to further stratify their services spend, so there are now several additional values for Material Group that can (and are) used among their service master records. Having a single default value for Material Group is resulting in incorrect reporting of spend per Material Group.
I removed the default value in the config node stated above, but now the problem is that when creating a requisition line for services (item category D) in ME51N, no value for Material Group comes in at all, resulting in an error because Material Group is a mandatory field. Making the field optional on the Field Selection Groups is not a valid solution, as they need Material Group for spend reporting.
What we really need is for the Material Group to be automatically copied over from the service master data, in the same manner that this takes place for the material group contained in a material master.
Is this possible?
Thanks in advance,
Jason

Hi,
Hi,
1) If service master is used in the PO item, then the system will take the
material group from the service master (AC01).
2) If no service master is maintained then the system will take the
material group from the table T023. To be able to change this material group on services level - if you want a different material group on services level, you must set the field ESLL-MATKL for visible in the table control settings, and the change of the service group must be carried out manually.
Please be advised that it is the standard behaviour that the material
group on service level is not updated automatically after you have
changed the material group on purchasing level. The material group on
service level must be adjusted manually.
3) By default for service lines the system will consider the material
group which is entered at the Item level.
Services can have different material groups, therefore you can change
the material group at service level. The material group in service line
can be different and always takes higher priority from the material
group at the item level.
Regards,
Edit

Service Master Integration from ECC

Hi,
We are on Extended Classic Scenario and we are wondering if we are able to use the Service Master which is replicated from the ECC and use it when creating a Service Type Shopping Cart?
We managed to get the Service Master into SRM and visible in COMMPR01 however when we raised a Service Type SC, we are unable to select the Service although the search help for the Service ID managed to return the result and once click OK, the Service ID is not in the SC. Error message "Product &1 does not exist; check your entries" /SAPSRM/PDO_SC 012.
Anyone knows if the above are possible and if yes, are there any pre-req for this to happen?

Hi Elham,
Thanks for the reply as we have already managed to resolve the issue. The issue is due to some of the enhancement which we have done previously on the material which has caused the service master not being able to be selected into the SC. We have identified it and fix it.
Regards,
Tiang.

Dump when i exit Service master from PO

Similar Messages

Maybe you are looking for