Dump when loading Master data(Attributes). using DTP

Hello....  I am loading activity network.
and getting a dump.
"MESSAGE_TYPE_X" " "
"CL_RSDMD_UPDATE_MASTER_DATA===CP"  or "CL_RSDMD_UPDATE_MASTER_DATA===CM00R"
"_CHECK_DATA_PACKET"
check for oss couldn't find any solution  I am in (BI 7.0 - 2004s) support pack SAPKW70015. If anyone of you has come accross this please let me know how you solved the issue.
thank you.

Hi Gopal,
   Here is the info on error message.
" There are duplicates of the data record 1 & with the key '00000000038 &' for characteristic EPROPERTY &. "
Hope this helps in understand the DTP error.
Thanks,
SB.

Similar Messages

  • Infopackage dump when load master data 0BPARTNER from CRM client.

    Dear Experts,
    Here is the error message:
    Runtime Errors         SYNTAX_ERROR
    Date and Time          2010.08.20 14:39:25
    Short text
         Syntax error in program "SAPLBD33 ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLBD11" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLBD33 " in include "LBD33
          " in
         line 20:
         "Type "IDOC_DATA_CRYPTION" is unknown"
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
         Error in the ABAP Application Program
         The current ABAP program "SAPLBD11" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Please kindly give some sugession about this error, thank you!
    Andy Hu

    Hi Andy,
              Please try and reduce the size of datapackage in the infopackage screeen, save the changes to the infopackage and try and execute the load.  As far as I understand the settings for datapackage would be somewhere between 10,000 (or) 20,000 records per data package.  Try and make it 5000 and execute the load.  Even if that doesn't work try and make it 1000 and run the load.  I hope U r executing 0BPARTNER attribute data load.  So, it shouldn't create big problem.  Please try to reduce the package size and try Ur luck.  Hope this will solve Ur problem.
    Regards,
    Syed

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • Loading master data attributes

    Hi.
    When I am loading master data attributes, DTP process takes long time (approximately 30 minute) .
    Although records count is just 193.
    What may be a reason of this?
    Information about system:
    Software component   Release    Level
    SAP_ABA                      700          0023  
    SAP_BASIS                   700          0023  
    SAP_BW                        700          0025

    Hi...
    Check the Package size in the DTP......try to increase or decrease it.....if it makes any differerence......
    Secondly....in the DTP in the tab "Update" select the option " Valid records update, No reporting"....then the "Semantic Groups" in the tab " Extraction" will work.....it will improve the performance....
    Regards,
    Debjani........

  • Error while loading master data attribute

    Hi Guru's
    I am getting below mention error while loading master  data attribute.
    0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
    Please sugggest how to resolve ?
    Regards
    Karan

    Hi,
    I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor. 
    Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
    If need use Conversion exits in transfer rules.
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    or
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

  • Getting dump while loading master data

    Hi,
    i am gettin dump while loading master data genrated by copa,
    that gtwa_not_assigned.
    Best regards,
    dushyant.

    hi,
    see weather that master data contain attribute or not,
    if not than un check master data field from the master data attribute tab,
    and than try to load it again.
    Dushyant.

  • Error when scheduling the infopackage for loading Master data attributes

    Hi,
    Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
    In Data load monitor error i got this following error message.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update rules
    Thanks

    HI,
    A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - System log can also be helpful.
    Thanks,....
    Shambhu

  • Lock NOT set for: Loading master data attributes error

    Hi experts,
    We were encountering this error before when trying to load master data.  When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again.  We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE.  I have read that it is possible this lock error happens when two change runs happen at the same time.
    My question are:
    1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
    2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
    mark
    Message was edited by:
            Mark Siongco
    Message was edited by:
            Mark Siongco

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • ABAP DUMP while loading master data

    hi Gurus,
                  I am trying to load master data but I am getting the following dump , I cannot infer anything from the Dump message, I would be grateful if anyone could throw some light on it..
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC                                                             
    Exception              CX_SY_OPEN_SQL_DB                                                                      
           Occurred on     11/13/2006 at 13:17:57                                                                               
    The ABAP/4 Open SQL array insert results in duplicate database records.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "CL_RSDMD_UPDATE_MASTER_DATA===CP " had to be                                        
    terminated because one of the                                                                               
    statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                                      
    and make a note of the actions and input that caused the                                                      
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                                      
    termination messages, especially those beyond their normal deletion                                          
    date.                                                                               
    is especially useful if you want to keep a particular message.                                                                               
    rror analysis                                                                               
    n exception occurred. This exception is dealt with in more detail below   
    The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was   
    neither                                                                   
    aught nor passed along using a RAISING clause, in the procedure "_DB_FIRE"
    "(METHOD)"                                                                               
    ince the caller of the procedure could not have expected this exception   
    to occur, the running program was terminated.                             
    he reason for the exception is:                                           
    f you use an ABAP/4 Open SQL array insert to insert a record in           
    he database and that record already exists with the same key,             
    his results in a termination.                                                                               
    With an ABAP/4 Open SQL single record insert in the same error            
    ituation, processing does not terminate, but SY-SUBRC is set to 4.)                                                                               
    ow to correct the error                                                                               
    he exception must either be prevented, caught within the procedure "_DB_FIR
    (METHOD)", or declared in the procedure's RAISING clause.                 
    o prevent the exception, note the following:                              
    se an ABAP/4 Open SQL array insert only if you are sure that none of      
    he records passed already exists in the database.                                                                               
    ou may able to find an interim solution to the problem                    
    n the SAP note system. If you have access to the note system yourself,    
    se the following search criteria:                                                                               
    APSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC                                
    L_RSDMD_UPDATE_MASTER_DATA===CP " or "CL_RSDMD_UPDATE_MASTER_DATA===CM00Y "  
    DB_FIRE"

    one of the response says " In the infopackage set processing as 'Only PSA' and tick the checkboxes for 'Update subsequently in data targets' and 'delete duplicate records'.then try to reload."
    I do not find the Delete duplicate records check box in the IP...cananyonepls tell me where to find thid check box?
    thanks

  • Process chain for loading master data attributes

    Dear Experts,
    Can any one explain the steps needed to load master data into info object through process chain.
    Thanks in advance
    Santhosh
    Please search the forum
    Edited by: Pravender on Jun 8, 2010 3:06 PM

    in bi7 this would be:
    start
    infopackage
    dtp
    attribute change run
    M.

  • Langauage issue -when loading master data text

    I have a customer master data attribute and text .
    This is master data is customized one. With in function module based on sy-langu it will extract the English,German,French.... customer data
    R/3 side -Rsa3 transaction when i logon each logon language it is extracting the correct information with text values based on the logon language.
    When I am loading the data for each language it is not loading.It is updating only the english.
    I logged on as french ,German  loaded data  attribute and text also. Still it is not updating in the master data text values with french ,german.
    Infopackage selection also I set DE and  French.
    Master data Infoobject - Text language dependent is marked also.
    Advance thanks

    Hello smartone,
    I'm facing the same problem right now (only getting EN). So maybe we can share some experience.
    On help.sap.com I found the following link:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm</a>
    Almost at the bottom of the page there is the description about the language vector. The settings made in this vector control the extracted languages. As a standard all installed languages in the system are marked here.
    In the following link describes how to change the settings.
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm</a>
    But to be honest, I do not know how to get to the parameters. Otherwise I would have tried to check/change them. Does anyone have an idea?
    Regards,
    Martin

  • Error when reading master data attribute in transformation

    Hi All,
    I have 0employee in source DSO and it is mapped to Cube transformation correctly.. There are other objects in cube which are the attribute of 0employee master... I map 0employee to these objects and in transformation i select read from master data then it throws up an error...
    bold S:RSTRAN:556 39 0EMPLGROUP 01 Standard Group 0EMPLOYEE
    Dont know why this error is popping up ...
    Any pointers on this...
    Thanks & Regards,
    Anup
    Edited by: Anup Chaudhari on Feb 20, 2012 1:29 PM
    Edited by: Anup Chaudhari on Feb 20, 2012 1:30 PM

    Hi,
    This is a strange error that everybody faces but you can try this way.
    1) select the target object Employee attribute in the transformation
    2) assign the source field in the transformation. the source field should be 0EMPID
    3) In this source field there is a coulmn called IOASSIGNMENT. Type 0EMPID at that point
    4) change the rule type from direct assignment to master data attribute. Now you can select the field 0EMPID.
    Regards,
    Siva

  • How to only update existing records when loading master data ?

    Hello experts, I need your lights one more time.
    Here is my need :
    I have created an infoobject (IO) which is a very simple version of 0material, let's call it Znewmat --> Znewmat has material type and trademark as attributes, those two fields are available in 2 different datasources :
    - 0MATERIAL_ATTR for material type (field MTART)
    - 0MAT_SALES_ATTR for trademark (field MVGR2)
    When loading my new IO from 0MATERIAL_ATTR I use a filter (at DTP level) to get only a few material types (I get something like 1000 records),
    here is my issue : when I load from 0MAT_SALES_ATTR the field "material type" is not available to keep the same filter as for 0MATERIAL_ATTR and existing records are updated with the trademark, but I also get 5000 records I don't need, and my master data is "polluated" with useless lines.
    *and my question : is there a way while performing the second loading to ONLY UPDATE EXISTING RECORDS AND NOT ADD ANY
    NEW RECORDS ? (i didn't find anything in main options of my DTP)*
    (I'd like to avoid the solution to update the 0MAT_SALES_ATTR datasource to add the missing field)
    Thanks in advance for any help, points will be distributed.
    Guillaume P.
    Still no idea ?

    in the start routine of transformation from 0MAT_SALES_ATTR to znewmat do the following:
    select materials from /BIC/PZNEWMAT into i_mat
    for all entries in source_package where material eq source_package-material.
    loop at source_package.
    p_ind = sy-tabix.
    read table i_mat with key material = source_package-material.
    if sy-subrc ne 0.
    delete i_mat index p_ind.
    endif.
    this way you'll only update records that have previously been loaded by 0MATERIAL_ATTR DS
    loading sequence:
    first load ZNEWMAT from 0MATERIAL_ATTR. then activate ZNEWMAT. then load 0MAT_SALES_ATTR to ZNEWMAT.
    M.

  • Load Master data attributes error

    Hi all
    We are currently loading 0PM_ORDER and 0NOTIFICATN. In 0PM_ORDER we have 0NOTIFICATN as navigational attribute and in 0NOTIFICATN we have 0PM_ORDER as a navigational attribute. Sometimes both documents are new and as a result will the 0PM_ORDER not load becuase 0NOTIFICATN does not exist and vice versa. If you try to load 0NOTIFICATN it generates an error stating that the SID does not exist for 0PM_ORDER. So we found ourselves in a catch 22 situation.
    Is there a way to check for individual navigation attributes instead of using the generic update type in the scheduler?
    Thanks
    Karin

    Hi,
    If you make notification number as navigation attribute then it will create issues as it will try to create SID's for PM while loading the data and vice versa.
    May be you can try to remove PM orders from the navigation of Notification number and make it display only and see what happenes.
    Another soln is tricky but should work.
    Load the notification numbers first only to the notification number infoobject by any mean and activate this master data.This could be through the a new DSO between the existing data source and master data.
    I hope there will be attributes for notification number as well.
    Once notification is loaded then load the master data for PM Orders and then load the master data again for notification infoobject from the data source through another DSO.
    This may be tough in the case of delta as you will have to go for the same data load twice to the master data object.
    In this case you can have to TWO DSO's in between the master data object and the data source one only for notification number and another one for all the its attributes.
    Load the same delta from the data source to the bothe DSO.
    Use the one with only notification number to load before the PO orders load to the notification infoobject and load the data from nother DSO with attributes after the PM loads have happened into the notification number objects.
    You can wait for other replies as well if you are looking for easy solution.
    Thanks
    Ajeet

Maybe you are looking for