Dump when logging onto NW7.0 ABAP/Java trial - DBIF_RSQL_INVALID_REQUEST

Hello all,
I downloaded and installed the NW 7.0 Java & ABAP trial on Linux/VMware.
Everything went smoothly, until I logged on, when I got a short dump DBIF_RSQL_INVALID_REQUEST. I can continue working with it - I could even install the SAP license - but I keep getting the same dump every now and again.
I found [this thread|Short Dump: Before Login in SAP Netweaver 7 ABAP Trial; and a few others describing the same issue, however it's not going away. The firewall is completely disabled. I get the error logging in via sapgui for windows SP4 and also when using PlatinGUI on the server itself. The machine has plenty of resources and there are no errors starting up.
I did have a problem where there was a message about not finding "virtuell host in ifconfig" on startup, so I changed my hostname to n4shost and pointed it to 127.0.0.1 in the hosts file - the error went away.
Any ideas?
Cheers,
Mike

OK, that makes sense in your setup. I run SAP inside a VM, in a non-networked scenario VMWare creates a local network between the host laptop and the virtual machine and assigns addresses to both using DHCP. Interestingly I also found an easier workaround can be done just by using VMWare: add another network card, make it a static IP and don't connect it.
Actually now that you mention it, in a past life as a techie I remember we set up servers in exactly that way: Static IPs for an internal server network and DHCP to the outside on a separate network card. I guess even at interprocess level the system doesn't rely on everything being local (otherwise it would just use localhost).
Cheers,
Mike

Similar Messages

HT1338 i currently have a macbook 2.1 and want to update. what can it support? I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account.

i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?

Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

When logged onto a kindle book where is the apple share button?

when logged onto a kindle book where is the apple share button?

The Kindle app (I assume that you mean that you reading a Kindle book in the Kindle app) supports sharing to Twitter and Facebook (press and hold on a word, and when you release it you should get a popup for highlighting, notes and a version of share)

Why is there a server error when logging onto icloud?

When logging onto my icloud account on my pc, it said server error. I'm using the correct id and password, but it still wont work.

Hey ral18,
Thanks for using Apple Support Communities.
Follow these articles to troubleshoot the issue you ar getting when using your iCloud account.
Make sure you are able to sign in to iCloud.com.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Have a nice day,
Mario

Error Deploying DictionaryProject to NetWeaver 7.0 SR2 ABAP-Java-Trial

Hi,
I built a simple DictionaryProject with Netweaver Developer Studio. Only one table with an ID-KeyColumn.
But deployment to NetWeaver 7.0 SR2 ABAP-Java-Trial-VMWare failed with following error:
Feb 11, 2008 11:43:30... Info: E R R O R ******* (DbColumns)
Feb 11, 2008 11:43:30... Info: 23:43:30 2008-02-11 dbs-Error: Table BC_DDDBRTH: Error during reading of columns from db
Feb 11, 2008 11:43:30... Info: E R R O R ******* (DbColumns)
Feb 11, 2008 11:43:30... Info: 23:43:30 2008-02-11 dbs-Error: Caused by: DB2 SQL error: SQLCODE: -443, SQLSTATE: 38553, SQLERRMC: SYSIBM.SQLCOLUMNS;COLUMNS;SYSIBM:CLI:-805 Stack trace: com.ibm.db2.jcc.a.SqlException: DB2 SQL error: SQLCODE: -443, SQLSTATE: 38553, SQLERRMC: SYSIBM.SQLCOLUMNS;COLUMNS;SYSIBM:CLI:-805
The trial is runnign DB2 on SLES
Thank you,
Josh

Hi Josh,
please apply note 823019 .You need to logon as user db2<sid> and run:
cd sqllib/bnd # UNIX
db2 connect to <sid>
db2 bind db2schema.bnd blocking all grant public sqlerror continue
Regards
Frank

Is it possible to configure Webdynpro in Netweaver ABAP/JAVA trial vers

Is it possible to configure Webdynpro in Netweaver ABAP/JAVA trial version.

Hello Senthil ,
It possible to configure Webdynpro in Netweaver ABAP trial version.
SAP NetWeaver 7.0 ABAP Trial Version (incl. Web Dynpro ABAP) is available on SDN Download .
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">to Download !</a>
Regards ,
Santosh

When logging onto a web site with a log on name firefox is changing logon name from Kostas to kostas as the site is case sensitive it is not acceptable. how do I correct this? Thanks

I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
How can I correct this please
Probably no connection but
I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
Finally I had a phone call from a company called NERD-I.com
offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
Many thanks

Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert

Re: Invalid username and password when logging onto Hyperion workspace

Hi,
I have installed Hyperion Reporting and Analysis services.When I attempt to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the admin and password as username and password.I am able to login to Essbase Administration Services and User Management Console using this account.I have provisioned the user to Hyperion System 9 BI+ .
Thanks in advance.
-Sowmya

I was told that Dsun.net.inetaddr.ttl=0" is required to be passed to the web application server (JVM) that starts Hyperion Shared Services and all System 9 products that depend on Hyperion Shared Services
Is this correct? I see these errors in the log when I try to log into Workspace in the morning:
2010-03-24 08:26:03,509 [[ORB=_it_orb_id_1,Pool=1]::id-12] WARN com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(Unknown Source) - javax.naming.ServiceUnavailableException: ldaps.lirr.org:636; socket closed; remaining name ''

I keep getting an error message when logging onto iCloud. It states that "you cant sign in because of a server error". But the cloud status is "normal".

This is happened today after I udpated my iPad to IOS v7 and iTunes to 11.1.0.126 and only for one of my computers. I keep on getting an error message when trying to log onto iCloud. The error message is "you cannot sign-in because of a server error" but the iCloud status is "normal" and iCloud is fine on my other computers.

Next day the problem still continued. I did restart my computer a couple of times and then "it worked". Not sure why - if it really was a server problem or something on my side.

Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
Has anyone encountered this issue?
Thanks,
-K

Thank you all for the responses so far.
On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
Thanks for any additional info anyone can provide.
-Ken

Firefox crashes when logging onto googlemail on my PC, except when I am safe mode. Have tried unchecking hardware acceleration, but problen persists.

This problem began when I updated AVG to the 2012 trial version. I thenchanged over to the 2012 free edition, but the problem persists, so I think it has something to do with AVG. A scan revealed two trogan infections on the system, which Super Anti Spyware removed sucessfully. I have had this problem for about three days. In safe mode Firefox logs ontpo Gmail sucseefully.

Does the AVG system tray icon indicate AVG is enabled?<br />
''Hover the cursor over that icon and a tooltip should show AVG status.''

I keep getting "the connection was reset" etc when logged onto my bank.

When logged on to my bank (business account) and setting up weekly payments I can set up a couple of them but then I get the "the connection was reset" etc error message. If I try to log in again I just keep getting the same message.
Then I have to open up Chrome, log in to the bank, and finish the job with no trouble at all. Generally I prefer to use Firefox; but maybe not for much longer!

Thanks cor-el, I'll give your suggestions a try next week when I have to log into the bank.
Will let you know how I get on; I just hope I won't have to keep on doing it every time!

Errors when logging onto NWBC

I have two issues when logging into NWBC.
I'm connecting to my ECC DEV environment using http://myserver:8010/sap/bc/nwbc
when I first connect I get a message about an expired certificate
I'm not sure where to find this certificate to update the valid to date....
Then after saying yes... I get this error...
I've tried changing the Custom level in my internet options to allow mixed content - but it still gives this error message.
Any ideas?
Thanks!

Shane
This is actually an IE browser security certificate handling issue. What to do next would depends on how your corporate security team set up your certificate store ...
But if you want to give it a go -- try to install the certificate yourself into your own IE browser (that's assuming that the certificate is something that you trust) ...
To do so
-Click on the [Yes] and then proceed to install the certificate manually into your desktop.
-The certificate need to be stored in your Root Certificate directory. If you do NOT know where it's, try scanning your desktop for the file *.crt or Using the Windows Start Button to Run the program certmgr.msc
Note:
HTH

Procedure to install abap + java trial on windows xp

Hi,
I have ordered SAP NetWeaver 2004s ABAP Trial Version CD (system id "NSP", release 7.0 + SP8), installed it successfully (I could start it and work with it), and I then tried to install JAVA Trial (system id "J2E", release 7.0 + SP11 ; I downloaded it from the SDN link) application server right afterwards.
In step 2, I've got an error stating that DIR_PROFILE could not be found.
In fact, it seems that the error comes from SAPSYSTEMNAME undefined as shown in sapinst_dev.log file:
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-06-16 17:18:15.751 NW.getSAPDir() done: C:/usr/sap
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
Can't resolve parameter SAPSYSTEMNAME in profile. Returning undefined.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
While resolving parameter DIR_INSTALL: can't resolve C:\usr\sap\$(SAPSYSTEMNAME)\SYS because SAPSYSTEMNAME is unknown. Returning undefined.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
While resolving parameter DIR_PROFILE: can't resolve $(DIR_INSTALL)\profile because DIR_INSTALL is unknown. Returning undefined.
TRACE      [iaxxejsbas.cpp:367]
           EJS_ErrorReporter
1: function CHECK_VALUE_AGAINST_REGULAR_EXPRESSION ( regexpPattern , value )
2: {
3:   var installer = new Installer();
4:   var context = new Context();
etc.
Note that C:\usr\sap does not exist yet (I guess the system should create it later).
Do you have an idea how to correct this problem?
thx a lot
sandra

Hi Sandra,
did you install the loopback adapter? Check Re: Sneak Preview NetWeaver2004s ABAP installation help.
Peter
Points always appreciated

Dump when logging onto NW7.0 ABAP/Java trial - DBIF_RSQL_INVALID_REQUEST

Similar Messages

Maybe you are looking for