Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

Hi All,
I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
*METHOD constructor.
DATA:
    badi_context          TYPE REF TO lcl_badi_context.
CALL METHOD super->constructor
    EXPORTING
      form_scenario         = form_scenario
      form_scenario_service = form_scenario_service.
DATA:
    t5asrfscnsrv_wa TYPE t5asrfscnsrv.
SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
ASSERT sy-subrc EQ 0.
ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
fill_table_metadata( ).*
i followed this link also..its not working for me..
[Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
Regards,
Parthi

Hello Parthasarathi,
Please, try to implement the note 1075650.

Similar Messages

Switch to activate change working time in HCM processes and forms in portal

Hi,
I am tring to change the working time of an employee from 100 percent to 80 in ESS,using adobe forms,but the value is not getting changed.Please let me know whether we have to enable switch to make abobe form active in portal.
Regards,
Ramesh

Thanks Arpit,
WF-BATCH already has SAP_ALL. Do we need to assign some additional roles or profiles to this user?
Log says error reading Process Object
Thanks,
Jitesh

Execute HCM Process and Forms on Enterprise Portal ?

Hi Experts,
I have done a scenario on Employee Relocation Process with the reference of the tutorial specified in help.sap.com. [Here's the link|http://help.sap.com/erp2005_ehp_04/helpdata/EN/fe/1bd54243063658e10000000a155106/frameset.htm] in HCM Processes and Forms
The following are steps which i have done so far ....! relevant to that tutorial .
1) Created ISR Scenario
2) Created Form Scenario
3) Created Linkage between ISR and Form Scenarios.
4) Checked the consistency of the Linked ISR and Form Scenarios. Everything was fine ...
I have designed the form layout with relevant form fields that are required for the relocation process (HCM Forms) and created a workflow template with all the required steps specified in the tutorial .
Now my questions are as follow's:
1) how to test the HCM process ?
2) In which environments can I test the process ?. Can I test HCM process in Enterprise Portal if yes how ....?
3) In what way thus MSS and ESS are connected to HCM Process and Forms.
I am confused about this, can you experts please explain in details ...!
Use full Answers are rewarded must
Thanks
Mukkalla.sap

Looks like a program error to me.
Running a system on SAP_ALL to make it work cannot be a solution, so do an ST01 trace to find out which authorization exactly is missing and what is checked before the dump, and consider adding it if appropriate.
Cheers,
Julius

Error while Accessing the HCM process and forms

Hi All,
We have implemented HCm process and forms. Everything was working fine earlier but for past few days we are facing an issue after selecting an employee and clicks on the select process we are getting the following error. Kindly povide the solution.
The following error text was processed in the system GOA : Component Usage OADP_USAGE Does Not Have an Active Component
The error occurred on the application server sapgoa_GOA_37 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ENSURE_ACTIVE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
Method: GET_INTF_CONTROLLER_INTERNAL of program CL_WDR_COMPONENT_USAGE========CP
Method: IFWDR_INTERNAL_API~GET_INTERFACE_CTLR_DELEGATE of program SAPLWDR_RG_PROXY_FACTORY
Thanks & Regards,
Sreelatha Gullapalli.

Hi,
In EhP4, the employee search is created using OADP framework . And if the relevant configuration is not maintained , I mean there is a view cluster where the applications (PA/PD) and relevant object types are maintained.
If this is not maintained, this creates a error. Please check .
Hope this helps.
Best Regards
Saujanya

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

Error in MSS HCM Processes and Forms Overview

Hi all,
Currently we are working on ESS/MSS from NW 7.3 portal.
When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
And on some user HCM Processes and Forms Overview not shown properly.
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest me the solution.
Regards,
Devendra

Dear Andrea,
I reset the password of backend user and gave sap_all and sap_new role.
Last time it prompt the screen in mss as to change the password. (See above screen shot).
But after reset the password...error showing instead of login screen in mss as below:
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
   What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I checked log in ST22 as below
What happened?
    The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_ABAP_TSTMP=================CP' has to be
    terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
     caught in
    procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
Regards,
Devendra

Default value in dropdown field for FPM form in HCM Processes and forms

Hi Experts,
I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achieve this in dropdown field related to FPM Form.
Please guide me.
Regards,
Nayani.

You would have to assign the default value to one your custom generic services.
Regards.
PS: There are posts which talk about generic services , make yourself comfortable with the concept of generic services.

Adobe HCM Processes and Forms Start processes iView error

Hi,
We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
    at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
    at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
    ... 40 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
J2EE Engine 7.00 patchlevel 109044.44
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system SunOS, version: 5.10, architecture: sparcv9
Session & Other
Session Locale en
Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
     ... 31 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
     at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
     at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
     at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
     ... 38 more
Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
Any help will be appreciated and rewarded accordingly.
Regards,
Thomas

hello,
how did you solve it ?
Regards,
Dimitry Haritonov

Creating a new position and updating IT 1028 using HCM processes and forms

I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

HI
Create one Function Module to return all the vacant positions and load that in a drop down.
For IT1028 you have to update via the RH_INSERT_INFTY.
Kind Regards,
Mukesh

Infotype 0000 Creation using HCM Processes and forms in MSS

Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.

Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat

HCM Process and Forms - Create and End record using the same form scenario

Hi All,
I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
How would this be possible?
Thanks,
J

You are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it. Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
Cheers
Ian

HCM Process and Forms & Global employee management

Hi all,
I would to know if anyone of you experience in implementing HCM Process and forms for Global employee management(GEM).
I would like to know the difficulties or challeges .
How the forms will work.
Means if i have created a form using Personnel number without GEM.
Later if i Implement GEM.do i have to Change the form ?
Does P&F has any option choose the employee based on personnel id anywhere or we have to use personnel number and process as existing.
what could be stuctures for each infotype which are country specific .
Please share your experience on this.
Regards,
Nachy

Forms and processes are enabled for CE/GE.
what process you would lile to do ?
refer HR_PA_US_ADDL_CONTRACT sample process and note 1366872
1) The central person id of the existing (reference) pernr should be
   read with the help of a generic service and this should be made
   available for the SAP_PA service so that a new central person is not
   created. This should be set in the field CENTRAL_PERSON in the
   form scenario.
2) An explicit operation on IT0709 should not be defined in the
   infotypes and operations of the design time tool. This is
   automatically handled by the infotype framework through the data
   sharing mechanism (table T582G). Kindly ensure that IT0709 is
   enabled for data sharing and please remove it from the process.
3) The reference pernr data and the shared infotypes must be read with
   the generic service only (refer to note 1366782), these should not
   be read with the SAP_PA service as this may lead to a clash in the
   record keys and can lead to undesired results.

HCM Process and Forms Dynamic Actions

Hi
We are implementing HCM process and forms and presume that dynamic actions will have to be recreated as rules.
Can anyone give any guidance in this area as some of our dynamic actions are quite complex.
Many thanks
Ian

Hi,
For HR forms please follow the following link
HCM Processes and Forms (www.service.sap.com/erp: - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms -> Media Library)
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081848&
A dynamic action has the following components.
Infotype Number (INFTY): specifies the infotype for which you want the dynamic action triggered
Subtype (SUBTY): narrows the focus to a specific subtype
Field Name (FIELDN): starts your action when a maintenance function is performed on a particular field
Function (FC): specifies the various maintenance operations to which your dynamic action would respond. They are 02 (change); 04 (create); 06 (create and change); 08 (delete); 10 (change and delete); 12 (create and delete). Dynamic actions are only applicable in maintenance operations, not in display functions.
Sequence Number (NO): refers to a sequential number.
Step (A): specifies a particular type of action. No dynamic action is executed if the function character has a value other than one of the following:
             P: Plausibility checks, which allow you to check certain conditions.
             I: Calls an infotype for processing
             W: Called after the I statement and used to assign values to screen fields while creating or copying another infotype record through the I statement
              F: Calls a FORM routine (subroutines in ABAP) during your action. The routine may reside in or out the module pool MPNNNN00.
             V: Lets you treat collectively a number of fields for which you want to define a common dynamic action
              M: Sends SAP Office mail
Variable function part: The variable function part along with the step indicator forms the core part of your action. It specifies the processing details when the dynamic action is triggered. For example:
Requirement: When the postal code or the city of an employeeu2019s permanent residence is changed in infotype 0006, an email should be sent to the administrator.
INFTY    SUBTY    FIELDN    FC          NO.    STEP       VARIABLE FUNCTION
0006           1             ORT01      06             001           V               PSTLZ
0006           1             PSTLZ      06             002           M               M0001
The V statement on line 001 is used to link the two fields to the M statement. The statements relevant to field PSTLZ are also applicable to the ORT01 field.
When a record is created or changed in infotype 0006 of permanent address, an email is sent using the feature M0001. Information such as the recipient address, subject, and content of the mail is derived from M0001.
Warm REgards,
Kapil

Dynamic Parallel Approval for HCM Process and Forms

Hi everyone,
I have a scenario where I need to use the "Dynamic Parallel Approval" (or to keep it simple, initially I tried using the "Parallel Approval" wizard)for a workflow used in the HCM Process and Forms.
The standard task for approval in process and forms is TS17900101. I have mentioned a multiline container in the Miscellaneous tab of this task. However,I was unable to use this task in the wizard. There are no results attahced to this task unlike any other standard approval task (like TS30200147). I need to use the task TS17900101 in the workflow assigned to process and forms, but not sure how to handle this scenario (parallel approval).
If this is not the right way of doing it, Is there any workaround for "Parallel Approval" in HCM Process and Forms.
Could anybody throw some light around this area.
Thanks for your help.
- MM

Thanks Anuj. But I believe, the container element that I add in the miscellaneous tab does not necessarily have to be used in the agent assignment. The multiline container is just to instantiate the workitem 'n' number of times. Correct me if I am wrong.
My concern is that I was unable to use this approval task (TS17900101) in the workflow wizard for dynamic paralle/parallel approval.
Arghadip - Thanks for your suggestion. I have seen some your nice contributions in the WF forum.
I actually tried using the 'Blocks'. But this is what I ran into. When I send multiple approval requests (say 3), if one person has approved it and the second has rejected it,I need to take out the workitem from the third person's list (because it has been rejected by someone in the group). I am not sure if this is possible using Blocks. And in my case the third person is still having the workitem, but gets a dump/error when he tries to open it.
Also, if any one has rejected the request, I do not have to wait for the rest to take any action on the workitem and proceed further. But I guess in 'Blocks' it will not let you go out unless every workitem has been processed.
To summarize,here's what I need - I need to come out of the block for two conditions. One, if everyone has approved, comeout of the block with an apprval flag. Two, if anyone has rejected (even if some have not processed their workitem), delete the workitems from others inbox and come out of the block with a rejection flag.
So, any kind of input or suggestions on how this could be handled would be highly appreciated.
Thanks
MM

Portal PCR and HCM Process and Forms.

Hello,
We have a request from client that they want to use SAP Personal Change Request (PCR) in MSS role.
So when we tried to configure it, A error was thrown to us as :
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
u2026u2026
Caused by: com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../sap.com/msspcr/PcrApplication/wd_key48u2026..
So after looking for the cause of error we came to know that this requires an ADS (Adobe Document Service) to be activated.
Now we came to know that it requires some additional licence from SAP (Please verify this statement....if anybody has faced this issue)
So we now decide to use HCM Process and Forms for our client...
How ever when we try to access that in portal it says "Resource not Found".
After looking for the same in SAP help we came to know that it requires some
Business Package for HR Administrator (SAP ERP)
HR Administrative Services (PA-AS).
Now how can I know that whether we have these components already deployed in Portal / R3.
And if I get them, then will there be again a need for ADS (Adobe Document Service).
Please comment on the same.
Thanking you in anticipation.

Hi Saurabh,
Yes the error you are getting is for the ADS and interactive forms does have additional licenses for online forms but this totally depends on the package that you use.
For e.g IF you have SAP E.C.C 6.0 with Ehp4 then there are standard HCM processes and forms available that comes with the package .
In this case you can check in your sandbox if the sample processes works and verify with SAP for the usage.Since the cost depends on per form per user basis.
Note :
For SAP supplied interactive forms, no additional cost.
As for custom interactive forms, there is an additional cost.
For checking if HCM processes and forms are available in your system :
You could go for the t.code HRASR_DT or Configuration of Design Time can be accessed in the IMG under Personnel Management > HR Administrative Services > Configuration of Forms/Process.
However you need to check with the BASIS and portal guys for roles and authorizations.
Hope this info helps.
Regards,
Aravind.P

Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

Similar Messages

Maybe you are looking for